GIGA TMS SF650A Fingerprint Reader With RJ45 Connector Ethernet Interface User Manual

GIGA-TMS INC. Fingerprint Reader With RJ45 Connector Ethernet Interface

user manual

SmaFinger.NET®
Quick Start
1
TM951296A
SmaFinger.Net Quick Start
Quick Start to connect the SF650A on the Ethernet
Step 1
Connect SF650A to Ethernet HUB
with (WAS-T0413) cable.
Note:
You can also connect SF650A to
your PC or Laptop directly with
same cable.
Step 2
Connect Power DC12V with
(WAS-T0132) Cable
Remark:
The WAS-T0132 can be used for
Power.
Or, you can connect the power to
the PIN VCC and GND (blue
connector of SF650A).
Step 3
Use “SmaFinger.NET Discoverer”
utility to search all
SmaFinger.NET device(s) on the
network.
(The utility can be found in the CD
disk5406).
Quick Start to connect the SF650A on the Ethernet
+
DC12V
+
-
DC12V
2
TM951296A
SmaFinger.Net Quick Start
Step 4.
Click “Refresh” to refresh the
SmaFinger.NET list.
Step 5.
Click “IP Settings” to change the
new device name.
Step 6.
Edit the SF650A device name for
easy recognition.
Click "Save" to change the
settings.
NOTICE: If you need use manual
IP, you can click "Manual" and
setup the correct IP you used.
Quick Start to connect the SF650A on the Ethernet
3
TM951296A
SmaFinger.Net Quick Start
Control Device with Internet Browser
Step 1
Use “SmaFinger.NET Discoverer”
utility to search all available
SmaFinger.NET device(s) on the
network.
Click “Web Admin” to go to the Web
Administrator Utility.
Step 2
On Login page, to login to the
SF650A device.
Step 3
Login on the SF650A
Default username & password:
username: admin
password: admin
Control Device with Internet Browser
4
TM951296A
SmaFinger.Net Quick Start
Add a new user and fingerprints with Internet Browser
Step 1
Login Web Admin Page.
Refer to " Control Device with
Internet Browser"
Step 2
Click “Enroll A User” on the "Tools"
menu of SF650A Administrator
utility page.
Step 3
Click the “Start Enroll” to start the
enroll process.
Please put the fingerprint on reader
twice and the "Status" will show how
many fingerprints enroll success.
Type in the new user's name and
click the "Save" to finish a new user
adding.
Note:
Click “Stop Enroll” to cancel the
enroll process,
Click “Reset” to cancel the enroll
process, and delete all fingerprints
with this user.
(Remark: To assign a specific ID to the enrolled fingerprint, you have to click “Save” at
the last step. However, you have to enter a name in “Name” box first if you want “Save”
action to be done successfully.)
Add a new user and fingerprints with Internet
Browser
5
TM951296A
SmaFinger.Net Quick Start
Setup time zone with Internet Browser
Step 1
Login Web Admin Page.
Refer to " Control Device
with Internet Browser"
Step 2
Click “Time Zone” on the
"Settings" menu of SF650A
Administrator utility page.
Step 3
Choose the time zone for local.
Click "Save" to setup the
current time zone
Setup time zone with Internet Browser
6
TM951296A
SmaFinger.Net Quick Start
Remote Control the door lock with Internet Browser
Step 1
Login Web Admin Page.
Refer to " Control Device with
Internet Browser"
Step 2
Click “Remote Control” on the
"Tools" menu of SF650A
Administrator utility page.
Step 3
Click the “Toggle” to toggle the relay
of SF650A.
Note:
The SF650A supports the AJAX
technology which displays the relay
status automatically.
Remote Control the door lock with Internet
Browser
7
TM951296A
SmaFinger.Net Quick Start
Configure the SF650A reader functions
Step 1
Use “SmaFinger.NET Discoverer” utility
to search all available SmaFinger.NET
device(s) on the network.
Then select the device you want to
configure the reader functions and
click the “Reader Utility”
Step 2
The discoverer utility will execute the
“Mifare/DESfire Reader Utility” and
display the selected SF650A device.
Configure the SF650A reader functions
8
TM951296A
SmaFinger.Net Quick Start
How to change PC/Laptop network setting to support the Auto IP mode
Step 1
Most of the PC/Laptop network default setting is
“Obtain an IP address automatically” (auto IP
mode). If not, you can follow the steps to change
the network setting to auto IP mode.
Go to:
Control Panel > Network and Internet Connections >
Local Area Connection Properties
Step 2
General select Internet Protocol (TCP/IP) and click
Properties.
Step 3
Select the “Obtain an IP address automatically.
then click “OK”.
Trouble Shooting
9
TM951296A
SmaFinger.Net Quick Start
Step 4
Connect the SF650A to PC/Laptop via Ethernet cable
then Power On the SF650A.
How to go back to default settings
When password is lost, forgotten or need to reset
the device to the auto IP mode.
You can press the Reset-Key for 5 seconds, the
SF650A will reset automatically and go back to
default setting. The password is “admin” and IP
mode will set to auto IP mode.
Some settings will remain the same when reset
to default:
1. Device name
2. MAC address
3. Reader functions
4. Fingerprint Template database
5. User Data
To
Laptop
Reset
Key
Trouble Shooting
10
TM951296A
SmaFinger.Net Quick Start
Installation Manual
11
TM951296A
SmaFinger.Net Quick Start
CAUTION:
The crossed out wheeled bin label that can be found on your
product indicates that this product should not be disposed of
via the normal household waste stream.
To prevent possible harm to the environment or human
health please separate this product from other waste
streams to en-sure that it can be recycled in an
environmentally sound manner.
For more details on available collection facilities please
contact your local government office or the retailer where
you purchased this product.
This information only applies to customers in the European
Union.
For other countries, please contact your local government
to investigate the possibility of recycling your product.
PROMAG®
GIGA-TMS INC.
http://www.gigatms.com.tw
mailto:promag@gigatms.com.tw
TEL : +886-2-26954214
FAX : +886-2-26954213
Office: 8F, No. 31,Lane 169, Kang-Ning St.,Hsi-Chih, Taipei, Taiwan
TM951128
FCC Statement ：
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
Federal Communications Commission Requirements
The equipment has been tested and found to comply with the limits for Class B Digital Device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communication. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
●Reorient of relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE
FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and receiver.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
FCC Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. The equipment has very low
levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).

Navigation menu