Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2604031 |
| Application ID | 4o1Gjrs0/YB/YhPmjs6uSw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 353.17kB (4414664 bits) |
| Date Submitted | 2015-05-04 00:00:00 |
| Date Available | 2015-05-04 00:00:00 |
| Creation Date | 2015-04-16 11:35:35 |
| Producing Software | doPDF Ver 7.3 Build 391 (Windows 7 Business Edition (SP 1) - Version: 6.1.7601 (x86)) |
| Document Lastmod | 2015-04-22 17:04:33 |
| Document Title | Users Manual |
UE600 User Guide TM951326 - 01 April 16, 2015 Copyright© 2015 GIGA-TMS INC. Printed in Taiwan Any part of the contents of this document, without the express written GIGA-TMS permission, shall not in any documents, electronic, mechanical form of remakes or spread. File contents are subject to change without notice. Revisions Revision Date 01 April 16, 2015 Description preliminary draft Has been tested in accordance to essential protection requirements of the R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters and found the test results indeed meet the limitation of the relevant test standard(s) listed below: EMC Radio Spectrum EN 301 489 - 1: V1.9.2 EN 302 208 - 2: V1.4.1 : (2011) 2011 EN 301 489 - 3: V1.6.1 EN 302 208 - 1: V1.4.1 : (2013) 2011 Safety EN 60950-1:2006+A11:2009+A1:2010+ A12:2011+A2:2013 Test standard: FCC rules Part 15 subpart C 15.247 (2013 - 10) Test Result: No deviations from the technical specification(s) were ascertained in the course of the tests performed. Test standard: FCC rules Part 15 subpart B Test Result: Radiated Emission. FCC Part 15. 109 / 15.107 Class B. Test passed. Warning Federal Communication Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Contents Chapter 1：Introduction...........................................................................1 Chapter 2：About UE600 .........................................................................2 Specification ........................................................................................................ 2 LED Indication ..................................................................................................... 3 Chapter 3：How to Use UE600 ................................................................4 Before Installing .................................................................................................. 4 Start to Use UE600 .............................................................................................. 4 Chapter 4：Troubleshooting ...................................................................5 Contact us..................................................................................................6 UE600 User Guide Chapter 1：Introduction Introduce The UE600 is a desktop Ultra High Frequency RFID Reader compliant to ISO18000-6C EPC Gen 2 protocol with an operating range of 840 to 960 MHz. And UE600 also easy to use USB HID to connect PC and have auto sensor which can auto read 、write Tag. The software UE600 Tag Issuer is supplied with the reader for Tag reading and writing. Before using the UE600 Reader. We recommend that you should already read this user guide. Fitting UE600 include antenna. The appearance as shown below UE600 Top view UE600 USB Interface Please download software or user guide from following link: http://ftp.gigatms.com.tw/disks/disk5472/ 60cm USB cable table © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw UE600 User Guide Chapter 2：About UE600 Specification USA UE600 Standard RFID spec Frequency Range RF power Interface Power Require UE600-00 Europe UE600-30 ISO 18000-6C, EPC Class1 Gen2 902~928 MHz 865~868 MHz Max 16dBm USB HID Standby : 110mA@5VDC Working : 300mA@5VDC, Min power require : 500mA@ 5VDC Max 20 cm (depending on Tag) RF Reading Range Dimension L: 120mm / W: 86mm / H: 79mm Physical Characteristics Weight 150g ( not Include USB cable ) Environment parameter Temperature Operating : -10°C ~ 60°C Storage : -15°C ~ 65°C Humidity Operating : 10% ~ 90% (no coagulation) Storage : Max 90% (no coagulation) Regulatory approvals Authentication CE R&TTE FCC ID EN 302 208-1/-2 PART 15B/C EN 301 489-1/-3 EN 60950-1 ESD Conduct : 6kv , Air : 8kv © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw UE600 User Guide LED Indication Status / Color Power / Red Read / Green Write / Yellow Buzzer / Beep Power ON ON ON ON a beep Standby ON OFF OFF OFF Read Success ON ON OFF a beep Read Fail ON ON OFF 3 beeps Write Success ON OFF ON a beep Write Fail ON OFF ON 3 beeps © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw UE600 User Guide Chapter 3：How to Use UE600 Before Installing Before Install UE600. Please make sure the following items are ready. A computer (Window XP / Vista / 7 or higher version systems) which already installed UHF Tag Manager. A UE600 reader with USB cable. UHF Tags (ISO18000 Class 1 Gen 2). Start to Use UE600 Connecting UE600 on USB port of your PC. Executing the software UHF Tag Manager to connect UE600. Please refer to UE600 Software User Guide. There are instructions about how to read/write tags. NOTE The performance might be better or worse according to different tags and working environments. UE600 can only read one tag at a time. Therefore, please keep other tags about 40cm away to reduce the interference. Do not put tags to or near metal objects or liquid surface as possible. Make sure there are not any same frequency devices or large power equipment in the same area. © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw UE600 User Guide Chapter 4：Troubleshooting 1. Cannot connect to UE600 with UHF Tag Manager? Please check the Power light of UE600 is lighting. Please check USB cable is connecting well to PC. 2 Cannot read UHF Tags? Please check the software UHF Tag Manager can find out UE600 and connect to it. Please check the tag is a ‘UHF’ tag and is functional. While you put a UHF tag on the top of UE600 and execute read command (or Auto) , the ‘Read’ light shall light up once. © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw UE600 User Guide Contact us Address: 8F, NO.31, Lane 169, Kang-Ning Street, His-Chih Dist, New Taipei City, Taiwan Tel: 886-2-26954214 Fax: 886-2--26954213 Websites: www.gigatms.com.tw Email: Sales inquiry email - promag@gigatms.com.tw After sales service - support@gigatms.com.tw © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw TA500 User Guide TM951328 - 01 April 16, 2015 Copyright© 2015 GIGA-TMS INC. Printed in Taiwan Any part of the contents of this document, without the express written GIGA-TMS permission, shall not in any documents, electronic, mechanical form of remakes or spread. File contents are subject to change without notice. Revisions Revision Date 01 April 16, 2015 Description preliminary draft Has been tested in accordance to essential protection requirements of the R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters and found the test results indeed meet the limitation of the relevant test standard(s) listed below: EMC Radio Spectrum EN 301 489 - 1: V1.9.2 EN 302 208 - 2: V1.4.1 : (2011) 2011 EN 301 489 - 3: V1.6.1 EN 302 208 - 1: V1.4.1 : (2013) 2011 Safety EN 60950-1:2006+A11:2009+A1:2010+ A12:2011+A2:2013 Test standard: FCC rules Part 15 subpart C 15.247 (2013 - 10) Test Result: No deviations from the technical specification(s) were ascertained in the course of the tests performed. Test standard: FCC rules Part 15 subpart B Test Result: Radiated Emission. FCC Part 15. 109 / 15.107 Class B. Test passed. Warning Federal Communication Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: . Reorient or relocate the receiving antenna. . Increase the separation between the equipment and receiver. . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. . Consult the dealer or an experienced radio/TV technician for help. FCC Caution To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Contents Chapter 1：Introduction...........................................................................1 Chapter 2：About TA500 .........................................................................2 Specification ........................................................................................................ 2 LED Indication ..................................................................................................... 3 Chapter 3：How to Use TA500 ................................................................4 Before Installing .................................................................................................. 4 Start to Use TA500 .............................................................................................. 4 Chapter 4：Troubleshooting ...................................................................5 Contact us..................................................................................................6 TA500 ser Guide Chapter 1：Introduction Introduce The TA500 is a desktop Ultra High Frequency RFID Reader compliant to ISO18000-6C EPC Gen 2 protocol with an operating range of 840 to 960 MHz. As a smart UHF reader, TA500 also supports EPC Encoding and Decoding feature compatible with EPC Tag Data Standard (TDS) of GS1. And TA500 also easy to use USB HID to connect PC and have auto sensor which can auto read Tag. The software TA500 Tag Issuer is supplied with the reader for Tag reading and analysis. Before using the TA500 Reader. We recommend that you should already read this user guide. Fitting TA500 include antenna. The appearance as shown below TA500 Top view TA500 USB Interface Please download software or user guide from following link: http://ftp.gigatms.com.tw/disks/disk5473/ 60cm USB cable table © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw TA500 User Guide Chapter 2：About TA500 Specification USA TA500 Standard RFID spec Frequency Range RF power Interface Power Require TA500-00 Europe TA500-30 ISO 18000-6C, EPC Class1 Gen2 902~928 MHz 865~868 MHz Max 16dBm USB HID Standby : 110mA@5VDC Working : 300mA@5VDC, Min power require : 500mA@ 5VDC Max 20 cm (depending on Tag) RF Reading Range Dimension L: 120mm / W: 86mm / H: 79mm Physical Characteristics Weight 150g ( not Include USB cable ) Environment parameter Temperature Operating : -10°C ~ 60°C Storage : -15°C ~ 65°C Humidity Operating : 10% ~ 90% (no coagulation) Storage : Max 90% (no coagulation) Regulatory approvals Authentication CE R&TTE FCC ID EN 302 208-1/-2 PART 15B/C EN 301 489-1/-3 EN 60950-1 ESD Conduct : 6kv , Air : 8kv © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw TA500 User Guide LED Indication Status / Color Power / Red Read / Green Buzzer / Beep Power ON ON ON a beep Standby ON OFF OFF Read Success ON ON a beep Read Fail ON ON 3 beeps © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw TA500 User Guide Chapter 3：How to Use TA500 Before Installing Before Install TA500. Please make sure the following items are ready. A computer (Window XP / Vista / 7 or higher version systems) which already installed UHF Tag Manager. A TA500 reader with USB cable. UHF Tags (ISO18000 Class 1 Gen 2). Start to Use TA500 Connecting TA500 on USB port of your PC. Executing the software UHF Tag Manager to connect TA500. Please refer to TA500 Software User Guide. There are instructions about how to read tags. NOTE The performance might be better or worse according to different tags and working environments. TA500 can only read one tag at a time. Therefore, please keep other tags about 40cm away to reduce the interference. Do not put tags to or near metal objects or liquid surface as possible. Make sure there are not any same frequency devices or large power equipment in the same area. © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw TA500 User Guide Chapter 4：Troubleshooting 1. Cannot connect to TA500 with UHF Tag Manager? Please check the Power light of TA500 is lighting. Please check USB cable is connecting well to PC. 2 Cannot read UHF Tags? Please check the software UHF Tag Manager can find out TA500 and connect to it. Please check the tag is a ‘UHF’ tag and is functional. While you put a UHF tag on the top of TA500 and execute read command (or Auto) , the ‘Read’ light shall light up once. © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw TA500 User Guide Contact us Address: 8F, NO.31, Lane 169, Kang-Ning Street, His-Chih Dist, New Taipei City, Taiwan Tel: 886-2-26954214 Fax: 886-2--26954213 Websites: www.gigatms.com.tw Email: Sales inquiry email - promag@gigatms.com.tw After sales service - support@gigatms.com.tw © 2015 GIGA-TMS Corporation. All rights reserved http://www.gigatms.com.tw
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2015:04:16 11:35:35+08:00 Modify Date : 2015:04:22 17:04:33+08:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2015:04:22 17:04:33+08:00 Producer : doPDF Ver 7.3 Build 391 (Windows 7 Business Edition (SP 1) - Version: 6.1.7601 (x86)) Format : application/pdf Document ID : uuid:ac4f08ec-86ba-44c6-9443-c3ba7745a379 Instance ID : uuid:64281e09-b3b9-46d4-9e2a-7d494807184b Page Layout : OneColumn Page Mode : UseNone Page Count : 22EXIF Metadata provided by EXIF.tools