User Manual
User Guide_Hardware
GVCI component
1
Component
GVCI
Unlock Button
External Port
Bluetooth Button
◈GVCISpecification
Specification
Item
Micro Controller
System Memory
Operating Voltage
User Guide_Hardware
Unlock Button
Unlocks GVCI from OBD-
II connector
External Port
Communication port for Tablet PC
(Optional)
Bluetooth Button
Enables Bluetooth mode
Specifications
ARM 32-bit Cortex™-M4 / 18
0MHz
Flash Memory 2Mbyte / SRAM
256
7~30VDC
2
II connector
(Optional)
0MHz
256
KByte
Temperature Operating
Storage
Relative
Humidity
Operating
Storage
Operating Mode
Current Consumption
Housing
Dimension
Weight
Interface
Item
Wire Protocol
Wireless Protocol
Indication Lamps
Input Devices
GVCI (G-scan tab
Vehicle Communication Interface)
◈GVCI LED
Color Description
[Blue on]:
Connection in Ready status
[Blue flashing
]:
Item
CAN
K-Line/L-Line
Commercial Vehicle
Data/Control Line
User Guide_Hardware
-10℃ ~ 50℃ (14℉ ~ 122℉
) : Wireless LAN Mode
-10℃ ~ 55℃ (14℉ ~ 131℉
) : USB Mode
-20℃ ~ 80℃ (-4℉ ~ 176
℉
Noncondensing @ 0℃ ~ 10℃ (32
℉
95%RH @ 10℃ ~ 30℃ (50℉
~ 86
70%RH @ 30℃ ~ 55℃ (86℉
~ 131
Noncondensing @ -20℃ ~ 80℃ (-4
℉
Diagnosis Function / Flight Record Function
Typical 100mA @12V
ABS
58 X 74 X 36 mm
90g
Specifications
USB 2.0 Full Speed via 30-
pin Connection
Bluetooth 2.1 (2.4GHz )
1 LEDs(Front)
Input key
Vehicle Communication Interface)
Color Description
Connection in Ready status
–
GVCI Is not connected with
]:
GVCI is connected with G-scan Tab
Specifications
CAN (High Speed, Low Speed,
Single Speed
ISO-9141, ISO-9141-CARB, KWP-
2000
SAE-J1708
/J1587,J1850(VPWM,PWM)
Melco Pull-Down
3
) : Wireless LAN Mode
) : USB Mode
℉
)
℉
~ 50℉)
~ 86
℉)
~ 131
℉)
℉
~ 176℉)
Diagnosis Function / Flight Record Function
pin Connection
GVCI Is not connected with
G-scan Tab
Single Speed
)
2000
/J1587,J1850(VPWM,PWM)
[Green flashing]:
Vehicle communication in process
◈
How to connect with vehicle
Connect GVCI connector with OBD
User Guide_Hardware
Vehicle communication in process
How to connect with vehicle
Connect GVCI connector with OBD
-II port of vehicle.
4
Appendix
Changes or modifications not expressly approved by the party responsible for
complianceCould void the user
This device complies with part 15 of the FCC Rules.Operation is su
following two conditions:
(1)
This device may not cause harmful interference, and
(2)
this device must accept any interference received, including interference that may
causeundesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
User Guide_Hardware
Appendix
Changes or modifications not expressly approved by the party responsible for
complianceCould void the user
’
s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.Operation is su
following two conditions:
This device may not cause harmful interference, and
this device must accept any interference received, including interference that may
causeundesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
5
Appendix
Changes or modifications not expressly approved by the party responsible for
s authority to operate the equipment.
This device complies with part 15 of the FCC Rules.Operation is su
bject to the
this device must accept any interference received, including interference that may
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. Th
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful
guarantee that interference will not occur
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to
more of the f
ollowing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an ex
perienced radio/TV technician for help.
Indication of any restrictions of use
This equipment was restricted to indoor use.
Indication of the countries where the equipment is intended to bo used
This equipment may be operated in
LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR
This product is CE marked according to the provision of the R
Here by G.I.T co., Ltd.. declares that this product in compliance with
and other relevant provisions of Directive
WEEE (Waste Electrical and Electronic Equipment) symbol shown in [Figure 1] is indicated on the
back of the VCI main module, VMI main module, and
Please follow the regulation guide for disposal of Waste Electrical and Electronic Equipment. Use
caution disposing of the Trigger module; it contains a lithium battery. Users must follow the
regulations when replacing or discarding this b
User Guide_Hardware
protection against harmful interference in a residential installation. Th
is equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful
interference
to radio communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to
try to correct the interference
ollowing measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
perienced radio/TV technician for help.
Indication of any restrictions of use
This equipment was restricted to indoor use.
Indication of the countries where the equipment is intended to bo used
This equipment may be operated in
AT, BE, CY, CZ, DK, EE, FI,
FR, DE, GR, HU, IE, IT, LV, LT,
LU, MT, NL, PL, PT, SK, SI, ES, SE, GB, IS, LI, NO, CH, BG, RO, TR
This product is CE marked according to the provision of the R
ED( 2014/53/EU).
Here by G.I.T co., Ltd.. declares that this product in compliance with
the essential requirements
and other relevant provisions of Directive
2014/53/EU
WEEE (Waste Electrical and Electronic Equipment) symbol shown in [Figure 1] is indicated on the
back of the VCI main module, VMI main module, and
Trigger module.
Please follow the regulation guide for disposal of Waste Electrical and Electronic Equipment. Use
caution disposing of the Trigger module; it contains a lithium battery. Users must follow the
regulations when replacing or discarding this b
attery.
6
is equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
to radio communications. However, there is no
in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
try to correct the interference
by one or
Connect the equipment into an outlet on a circuit different from that to which the receiver is
FR, DE, GR, HU, IE, IT, LV, LT,
the essential requirements
WEEE (Waste Electrical and Electronic Equipment) symbol shown in [Figure 1] is indicated on the
Please follow the regulation guide for disposal of Waste Electrical and Electronic Equipment. Use
caution disposing of the Trigger module; it contains a lithium battery. Users must follow the
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product sh
household waste. Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative
which could otherwise be caused by inappropriate waste handling of this product. The recycling
of materials will help to conserve natural resources. For more detailed information about recycling
of this pr
oduct, please contact your local city office, your household waste disposal service or the
shop where you purchased the product.
User Guide_Hardware
Fig. 1. WEEE Symbol
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
European countries with separate collection systems)
This symbol on the product or on its packaging indicates that this product sh
all not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,
you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. The recycling
of materials will help to conserve natural resources. For more detailed information about recycling
oduct, please contact your local city office, your household waste disposal service or the
shop where you purchased the product.
7
Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other
all not be treated as
household waste. Instead it shall be handed over to the applicable collection point for the
recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly,
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. The recycling
of materials will help to conserve natural resources. For more detailed information about recycling
oduct, please contact your local city office, your household waste disposal service or the