GN Audio USA A125S A125s Bluetooth music adapter User Manual A125s UM FCC indd

GN Netcom Inc A125s Bluetooth music adapter A125s UM FCC indd

UserManual.wiki >

A125S User Manual

Manual

Bluetooth music adapterUser manualwww.jabra.com© 2006 Jabra, GN Mobile A/S (GN Netcom A/S). All rights reserved. Jabra® is a registered trademark of GN Mobile A/S (GN Netcom A/S). All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Mobile A/S (GN Netcom A/S) is under license.(Design and specifications subject to change without notice)Made in China

PART NUMBER Phone Number: 0800 0327026Email Address: support.uk@jabra.comCustomer Contact Details:

RELEASE YOUR JABRA

2RELEASE YOUR JABRA3Jabra A125s Bluetooth music adapter1. Thank youThank you for purchasing the Jabra A125s Bluetooth® Music Adapter designed for most iPods. We hope you enjoy it! You will discover a new way of enjoying your music – wirelessly!This instruction manual will get you started and ready to make the most of your adapter.When the Jabra A125s is connected to the iPod, handle your iPod and Jabra A125s with care.2. About your Jabra A125s1. Light indicator (LED) and multi-function button2. Charging socket3. Dock connector for iPodFig 13. What your Jabra A125s can doYour Jabra A125s is designed to work with any Jabra Bluetooth stereo headset such as the Jabra BT620s. The adapter connects with most iPods, iPod Minis and Nanos via iPod dock connector.Speciﬁcations:• Up to 10 hours of music - standby time up to 250 hours• Rechargeable battery with charging option from PC via USB cable, AC power supply (not included in the pack), or car charger (not included)• Weight 22 grams (¾ oz)• Operating range up to 10 metres (33 feet)• Advanced Audio (A2DP), Remote Control (AVRCP) (see glossary page 9) • Bluetooth speciﬁcation 1.2 (see glossary page 9)1. Thank you . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. About your Jabra A125s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33. What your Jabra A125s can do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34. Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45. Charging your Jabra A125s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46. Turning on your Jabra A125s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47. Pairing with a headset or other device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48. Using the Jabra A125s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59. What the lights mean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 610. Troubleshooting & FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 611. Need more help? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 612. Certiﬁcation and safety approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 613. Taking care of your music adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 714. Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 815. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8132

4RELEASE YOUR JABRA5Jabra A125s Bluetooth music adapter4. Your Jabra A125s will ﬁnd and connect to the headset• Within 1 minute the headset LED will start to ﬂash and the adapter will start to ﬂash slowly. Press play on your audio device. Sound will start to play in the headset If the headset LED is still solid blue after 1 minute repeat sections 2 and 3.NOTE: If you have a Jabra Bluetooth headset such as the Jabra BT620s, you can connect your mobile phone and your ipod simultaneously.To pair two devices, ﬁrst pair and connect your headset with your mobile phone (follow the instructions from your headset) and then pair your headset with the Jabra A125s as instructed above.8. Using the Jabra A125sStart playing music• Make sure that your headset is turned on before turning on the music adapter. The music adapter will then connect automatically to your headset.• Tap the button on the music adapter or use your headset play/pause button* to play or pause the musicOther music features supported by your Jabra A125s*Playing music from your Bluetooth stereo headset such as the Jabra BT620s • The prominent center button on the right side of the device is the play button. On the top there are the skip forward and skip back buttons.To start play*• Tap the play button once.To pause*• Tap the play button – tap again to resume playing.Answer a call when playing music*• Tap the answer/end button to pause the music and the call will be connected. The music will resume after the call has ended (depending on the device supporting this feature).Skip one track forward*• Tap the skip forward button - continue tapping to skip several tracks forward.Skip one track back*• Tap the skip back button - continue tapping to skip several tracks backward.Fast forward*• Press and hold the skip forward button.Fast rewind*• Press and hold the skip back button.* Device dependent - These features will work when the headset you are connected to supports Bluetooth remote control (AVRCP) proﬁle. Many headsets like the Jabra BT620s support this feature.Connect to the headset manually• Tap the button on the music adapter. (Make sure that the headset is switched on)What’s in the pack?• Jabra A125s Bluetooth music adapter• USB charger for charging from any PC or laptop• User manual4. Getting startedThe Jabra A125s is easy to operate. The multi-function button performs diﬀerent functions depending on how long you press them:Instruction: Duration of press:Tap Press brieﬂy and let goPress Approx: 1 secondPress and hold Approx: 5 seconds5. Charging your Jabra A125sMake sure that your Jabra A125s is fully charged for up to 6 hours before you start using it. Only use the chargers provided in the box or Jabra approved chargers such as the Jabra BT 620s AC charger – do not use chargers from any other devices as this might damage your Jabra A125s. Connect the USB charger to your Jabra A125s charging socket (see ﬁg 1)When the LED is solid red, your music adapter is charging. When the light turns to green, the adapter is fully charged.6. Turning on your Jabra A125s• Press the multi-function button to turn on your Jabra A125s – when the adapter is on the LED will ﬂash• Press and hold the button to turn the device oﬀ. 7. Pairing with a headset or other deviceBefore you use your Jabra A125s you must pair it with a Bluetooth headset or headphone• Make sure the headset and Jabra A125s are turned oﬀ1. Put the headset into pairing mode:Refer to your headset’s manual for pairing mode instructions, if you are pairing with the Jabra BT620s:• Press and hold the answer/end button until the LED is solid blue.2. Put your Jabra A125s in pairing mode• Press and hold the multi-function button until the LED light is solid blue3. Connect your Jabra A125s to your iPod via the dock connector

6RELEASE YOUR JABRA7Jabra A125s Bluetooth music adapteruses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit diﬀerent from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.The user must place the base 8” (20cm) or more from any personnel in order to comply with FCC RF exposure requirements.CEThis product is CE marked according to the provisions of the R & TTE Directive (99/5/EC).Hereby, GN Netcom, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For further information please consult http://www.jabra.comWithin the EU this device is intended to be used in Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, United Kingdom, and within EFTA in Iceland, Norway and SwitzerlandBluetoothThe Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom is under license. Other trademarks and trade names are those of their respective owners.13. Taking care of your music adapter• Always store the Jabra A125s with the power oﬀ and safely protected.• Avoid storage at extreme temperatures (above 45°C/113°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may aﬀect operation. High temperatures may also degrade performance.• Do not expose the Jabra A125s to rain or other liquids.9. What the lights meanWhat you see StatusSolid red ChargingFlashing red Low batterySolid green Fully chargedSolid blue Pairing modeSoft ﬂashing blue (every 3 sec) Streaming connection is establishedFlashing rapidly blue Searching for devices10. Troubleshooting and FAQPlease see the headset’s manual for further information regarding the headset.I hear crackling noises Bluetooth is a radio technology which means it is sensitive to objects between the headset and the device it is connected to. You should be able to have 10 metres (33 feet) of distance between the headset and the connected device when there are no major objects in the way (Walls etc.)I cannot hear anything in the headset Increase the volume in the headset and on the music player. Ensure that the headset is paired to a device that is playing. Make sure that music is playing on the audio device.I have pairing problems Ensure that both devices are fully charged and repeat all mentioned steps under pairing.11. Need more help?Jabra oﬀers customer support online at www.jabra.com or you can see the inside cover for the support details for your country.12. Certiﬁcation and safety approvalsFCCThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modiﬁcations not expressly approved by Jabra will void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, x

8RELEASE YOUR JABRA9Jabra A125s Bluetooth music adapter14. WarrantyJabra (GN Netcom) warrants this product against all defects in material and workmanship for a period of two years from the date of original purchase. The conditions of this warranty and our responsibilities under this warranty are as follows:• The warranty is limited to the original purchaser• A copy of your receipt or other proof of purchase is required.• The warranty is void if the serial number, date code label or product label is removed, or if the product has been subject to physical abuse, improper installation, modiﬁcation, or repair by unauthorized third parties• The responsibility of Jabra (GN Netcom) products shall be limited to the repair or replacement of the product at its sole discretion• Any implied warranty on Jabra (GN Netcom) products is limited to two years from the date of purchase on all parts, including any cords and connectors• Speciﬁcally exempt from any warranty are limited-life consumable components subject to normal wear and tear, such as microphone windscreens, ear cushions, decorative ﬁnishes, batteries, and other accessories• Jabra (GN Netcom) is not liable for any incidental or consequential damages arising from the use or misuse of any Jabra (GN Netcom) product• This warranty gives you speciﬁc rights and you may have other rights which vary from area to area• Unless otherwise instructed in the User Manual, the user may not, under any circumstances, attempt to perform service, adjustments or repairs on this unit, whether in or out of warranty. It must be returned to the purchase point, factory or authorized service agency for all such work• Jabra (GN Netcom) will not assume any responsibility for any loss or damage incurred in shipping. Any repair work on Jabra (GN Netcom) products by unauthorized third parties voids any warrantyWARNING: Improper connection, modiﬁcations, alterations, unauthorized repairs, dropping, hitting and other misuse or abuse of the product could damage the product and your iPod. Jabra shall have no liability for such damage.15. GlossaryBluetooth is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance (approx. 10 metres). Get more information at www.bluetooth.comBluetooth proﬁles are the diﬀerent ways that Bluetooth devices communicate with other devices. Bluetooth phones support either the headset proﬁle,the hands-free proﬁle or both. In order to support a certain proﬁle, a phone manufacturer must implement certain mandatory features within the phone’s software. Dispose of the product according to local standards and regulations. www.jabra.com/weeePairing creates a unique and encrypted link between two Bluetooth devices and lets them communicate with each other. Bluetooth devices will not work if the devices have not been paired.Standby mode is when the Jabra A125s is on but not connected to a headset. A2DP (Advanced Audio Distribution Proﬁle) is a Bluetooth Proﬁle that enables stereo sound. Both the adapter and the device it connects to must support A2DP in order to hear A2DP sound in the headset.AVRCP (Audio Video Remote Control Proﬁle) is a Bluetooth proﬁle that enables remote control of the device that the headset is connected to. Both the headset and the device it connects to must support AVRCP in order for AVRCP to work.

Navigation menu