GN Audio USA BIZ2400 Corded headset with Bluetooth (BT) and USB interface User Manual UserMan

GN Netcom Inc Corded headset with Bluetooth (BT) and USB interface UserMan

UserManual.wiki >

BIZ2400 User Manual

UserMan

1Jabra BIZ 2400 USBUSER MANUALwww.jabra.com

23Thank youThank you for purchasing the Jabra BIZTM 2400 USB headset. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your headset.abouT your Jabra bIZ 2400 uSb hEaDSETHeadset1 Microphone2a Right speaker2b Left speaker3 Headband4 USB Headset5 USB plug6 Clothing clip7 Mute button 8 Soft button (×)9 Soft button (O)10 Hookswitch11 Volume control© 2008 GN Netcom A/S. All Rights Reserved.This user guide is published by GN Netcom A/S.The information in this user guide is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by GN Netcom A/S. GN Netcom A/S assumes no responsibility or liability for any errors or inaccuracies that may appear in this user guide.Written and designed at GN Netcom A/S, Lautrupbjerg 7, 2750 Ballerup, Denmark, www.jabra.com.5910811761432a2b

45how To aDJuST volumE on ThE hEaDSETUse the wheel at the center of the USB controller to adjust the volume. Turn clockwise to turn up and counterclock-wise to turn down. You will hear a soft click in the headset each time you adjust the volume. When you reach maximum volume, the headset will beep twice as a warning. We recommend that you do not use the headset at full volume.how To muTE ThE hEaDSETIt is possible to mute the microphone on the headset so that no sound/voice will be transmitted from the head-set to the PC. By tapping the mute button the microphone is now muted. The lights will go from a solid green to pulsating red. It will continue to pulsate red while muted. To un-mute tap the mute button again and the light will go from pulsating red to solid green. Green when not mutedRed when mutedhow To anSwEr a call from your Pc SofTPhonEWhen a softphone call arrives, you will hear a ring tone in the headset. If you are using a Jabra-supported soft-phone*, then answer by tapping on the hook-switch button on the USB controller; tap again to hang up when you are done. Softphone control requires that you install Jabra PC Suite (described later in this manual)**. For other softphones, use the native interface on your computer to answer and hang up. When you are using a supported softphone, the USB controller lights work as indicated to the right.You also have the option of rejecting an incoming call by pressing and holding the assigned Soft button. The incoming call will then be rejected.how To connEcT hEaDSET To PcPlug the headset into a free USB port on your PC. Once connected, the headset's active mute and hookswitch buttons will be illuminated.The rst time connected, your PC displays a small pop-up message in the task bar to indicate that a new device has been found. You are now ready to use the headset.how To wEar ThE hEaDSET1 Adjust the headband length. The headband is adjustable in length. Push or pull the top section of the band until the headset ts comfort-ably.2. Wear the headset. Position one speaker over each ear with the band going over the top of your head, just as with a traditional pair of headphones.3. Position the microphone. Adjust the microphone by rotating it around the headset and exing the boom arm until it is positioned less than 2 cm (3/4") from your mouth. (The boom is free to rotate 360° or more.)2 cm3/4"3.23.121*) See www.jabra.com for an up-to-date list of supported softphones. Support for Microsoft Oce Communicator requires the Oce Communicator version of the Jabra BIZ 2400 USB headset. **) If using Microsoft Oce Communicator you do not need to install Jabra PC Suite.Solid green while idleFlashing green/blue on incoming callRed while on a call

89The Settings TabThe options on the Settings tab enable you to control the Audio protection (Intellitone). Use the settings in the Audio protection (Intellitone) area of the Settings tab to set the hearing-protection level of your headset.Hearing risk is evaluated as a function of both volume and duration. Therefore, the maximum sound level should be lowered as the number of hours you spend using the headset increases. The headsets oer a choice of ve protection levels. These features protect your hearing by preventing acoustic shocks and limiting the maximum noise exposure from the headset during your workday. This system is called Intellitone™, which is only available from Jabra. All protection levels (including “none”) also feature Peakstop™, which oers protection against sud-den, loud audio spikes.All four Intellitone levels above (other than “none”) meet and exceed de facto global protection levels, and are compliant with NIOSH standards and EU health and safety codes of 85 dB(A). The TT4 protection level is compli-ant with pertinent Australian recommendation.In the Audio protection (Intellitone) area, mark the radio button for the Intellitone level that matches the number of hours in which you use the headset each day (Australian users should choose TT4). If you are using a Microsoft Oce Communicator softphone you need to switch to MS Oce Communicator in the Settings tab as the primary target softphone for your calls. Important: Check your local laws or regulations to nd out whether a specic protection level is mandated in your area.The Softbutton TabThe settings on the Conguration tab enable you to assign functions to the soft buttons of the USB controller (labeled × and O, respectively). Use the drop-down lists here to select from the available functions for each of the two soft buttons. Once cong-ured, you will be able to trigger these functions by pressing the corresponding button on the USB controller.Often, you will congure these buttons to control the Bluetooth connection to your mobile phone. *See “Pairing the Headset with Your Mobile Phone”, below, for details about how to do this.If you want stereo sound for playing music, your phone needs to support A2DP.Updating the Headset FirmwareFirmware updates can sometimes improve the performance of your headset and/or add new features. Visit the Jabra web site to nd out if rmware updates are available for any of your Jabra products. You will be able to download the updates from there as they become available. WARNING: Do not remove the headset from your PC while the rmware is being updated and make sure your computer will not shut down or go into sleep or standby mode during the process. (Should a disconnection unintentionally occur, please retry from step 1)To apply a rmware update:1. If you have not already done so, then attach your headset to your computer.2. If you have not already done so, then download the rmware update from Jabra and save it on your hard disk or network in a location where you can see it from your computer.3. On your PC, use the Start menu to run the rmware-update application of the Jabra PC Suite.4. Follow the instructions on your screen to identify your headset model, select the rmware update le and apply it. See also the Jabra PC Suite online help for more details.how To uSE ThE hEaDSET wITh a mobIlE PhonEThe USB controller on the headset includes a Bluetooth circuit, which enables the headset to connect directly wirelessly to a mobile phone or another Bluetooth sound source. When connected to a mobile phone, you will be able to answer and end calls using the buttons of the of the Jabra BIZ 2400 USB controller.Pairing the Headset with Your Mobile PhoneTo use your headset with a mobile phone, you must pair the headset with your phone. Once they are paired, the headset will automatically connect to the mobile phone whenever it is in range (i.e., you should only need to pair the two devices once). The headset must remain connected to your computer, because it requires power from the USB connection.To pair your headset with a mobile phone:1. Connect your headset to your computer and run the Jabra Control Center (see above).2. Go to the Softbuttons tab of the Jabra Control Center. Here you see two drop-down lists for assigning functions to each of the soft buttons of the headset controller. 3. Decide which of the two soft buttons you would like to use to control your mobile phone. Open the matching drop-down list and select Mobile from the list. 4. The USB controller on the headset now lights blue, which indicates that the headset is in pairing mode. This means that it is advertising itself for pairing with other Bluetooth devices.5. Make sure that Bluetooth is active on your mobile phone and put your phone into Bluetooth nding mode. The exact procedure for doing this varies by mobile phone manufacturer and model—see your mobile phone manual for details.6. Your phone now looks to see if any nearby Bluetooth devices are advertising themselves for pairing—this should include your headset. Use your phone’s controls to identify and select the “Jabra BIZ 2400” device. Your phone may also ask for the headset’s pass code. The pass code for all Jabra devices is 0000 (four zeros); if necessary, enter this code into your phone and commit the code (e.g., by pressing on an OK button).7. Your phone will now attempt to connect to the Jabra BIZ 2400 USB controller and then shows you the result of the attempt. If the attempt fails, please try again. If you are still having trouble, please check your mobile phone documentation and/or contact technical support for Jabra and/or your mobile phone.*check you mobile manual for instruction on how to pair to headsets.

1011Once you have selected the mobile as one of the functions for your softbuttons, a Mobile tab will appear in the Jabra Control Center. You will be able to clear your paring list, thereby deleting the mobile phones paired to the headset. Once you have clicked Clear pairing list – the headset will automatically enter a pairing mode. By clicking on Enter pairing mode, the headset will enter pairing mode and you are now able to pair the headset to a mobile phone – see the section on pairing your headset to a mobile phone, above.Answering an Incoming Mobile CallWhen a call arrives at your mobile phone, you will hear a ring tone in the headset and the USB controller will ash blue and green. To answer the call, tap the soft button that you assigned to the mobile phone. When you are done talking, tap the same button again to hang up.Placing a Call over Your MobileTo place a call with your mobile phone while using your headset, simply dial your mobile phone as usual. Usually, the audio will be sent to your headset automatically whenever it is in range of your mobile phone. Please see your mobile phone manual for details about how your specic mobile phone interacts with a Blue-tooth headset and which, if any, conguration settings are available for this feature.TroublEShooTIng & faQSQ: I have pairing problems?A: Make sure that the Headset is in paring mode, indicated by a solid blue light. See the instructions in the user manual of that particular mobile to make sure that the mobile is also in paring mode.Q: I cannot hear anything in my headset?A: Make sure that the headset is selected as audio device on both the computer in the Control Panel and in the application you are using.Q: My computer does not detect the headset?A: Try to insert the headset in another USB port.Q: The computer does not automatically toggle between the headset and the mobile phone for audio?A: You can always select the headset as your default audio device manually. - Go to the Control Panel on your computer - Open the menu Sound and Audio devices. When inserted you can select the headset (It should appear as BIZ 2400) as your default device for Sound playback and Recording. - Press Apply and then press OK.If you are using Macintosh – Go to System preferences on your computer. When inserted you can select the headset in the Sound menu under Output and Input. nEED morE hElP?European customer service information: Web: www.jabra.com (for the latest support info and online User Manuals)Phone: Belgique/Belgium 0800722 52272Danmark 70252272Deutschland 08001826756Die Schweiz 00800 722 52272España 900 984572France 0800 900325Israel 00800 722 52272Italia 800 786532Luxembourg 00800 722 52272Nederland 0800 0223039Norge 800 61272Österreich 00800 722 52272Portugal 00800 722 52272Suomi 00800 722 52272Sverige 020792522United Kingdom 0800 0327026USA and Canada warranty Web: www.jabra.com (for the latest support info and online User Manuals)E-mail: Technical support: techsupp@jabra.com Information: info@jabra.comPhone: 1 (800) 327-2230 (toll-free in USA and Canada)Asia Pacic customer contact informationWeb: www.jabra.com (for the latest support info and online User Manuals)Toll Free Australia: 1-800-083-140 (Monday to Friday 10:00 – 19:00)China: 800-858-0789 (Monday to Friday 08:00 – 17:00)Hong Kong: 800-968-265 (Monday to Friday 08:00 – 17:00)Indonesia: 001-803-852-7664 (Monday to Friday 08:00 – 17:00)Japan: 0034-800-400-594 (Monday to Friday 09:00 – 18:00)Malaysia: 1800-812-160 (Monday to Friday 08:00 – 17:00)New Zealand: 0800-447-982 (Monday to Friday 12:00 – 21:00)Singapore: 800-860-0019 (Monday to Friday 08:00 – 17:00)Taiwan: 0080-186-3013 (Monday to Friday 08:00 – 17:00)

1213cErTIfIcaTIon anD SafETy aPProvalSCEThis product is CE marked according to the provisions of the R & TTEDirective (99/5/EC). Hereby, GN, declares that this product is in compliancewith the essential requirements and other relevant provisions of Directive1999/5/EC. For further information please consult http://www.jabra.comWithin the EU this device is intended to be used in Austria, Belgium, Cyprus,Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, United Kingdom, and within EFTA in Iceland, Norway and Switzerland. FCCThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Users are not permitted to make changes or modify the device in any way. Changes or modications not ex-pressly approved by Jabra will void the user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.- The user must place the base 8” (20cm) (need to verify if this is true) or more from any personnel in order to comply with FCC RF exposure requirements. Industry CanadaOperation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The term “IC:” before the certication/registration number only signies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specications were met. It does not imply that Industry Canada approved the equipment.BluetoothThe Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Jabra is under license. Other trademarks and trade names are those of their respective owners.gloSSaryBluetoothA radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance (approximately 33 feet). Learn more at www.bluetooth.com.Pairing Creates a unique and encrypted link between two Bluetooth devices and enables them to communicate with each other. Bluetooth devices will not communicate if they have not been paired.Jabra PC Suite A GN Netcom software communication control center. DFUDevice Firmware UpdateFirmwareThe software that is embedded in a hardware device, for example the Jabra BIZ 2400 USB headset. Like software, rmware is a computer program, which is executed by a computer.IP telephony (Voice over Internet Protocol) The routing of internet voice conversations or through other IP-based networks.© 2008 GN Netcom A/S. All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and speciﬁcations subject to change without notice).www.jabra.comMADE IN CHINA87-00746 B

Navigation menu