GN Audio USA BT300 BT300 Bluetooth Headset User Manual example

GN Netcom Inc BT300 Bluetooth Headset Users Manual example

users manual

BT 300 User Manual1 of 6BT300 BLUETOOTH WIRELESS HEADSETUSERS MANUAL(July 2002, Preliminary)GN Netcom
BT 300 User Manual2 of 6 BT300 Bluetooth Wireless Headset IntroductionThe BT300 Headset is a lightweight “over the ear” wireless headset utilizing Bluetooth technology in the2.4 GHz band for a short range (up to 10 meters) RF link. The headset contains a microphone and areceiver, and is intended for hands free communications with mobile telephones containing Bluetoothcompatibility or any other device that has a Bluetooth Audio Gateway.Headset power is provided by a rechargeable battery. The battery can be charged with a vehicular chargeadapter or an AC charge adapter. Battery Life is approximately 4 hours {“Talk Time”) and 100 hoursstandby (“Sniff”) timeThe headset has the following user operated controls (see Figure 1):1. On/Off Switch---Press and hold to toggle state.2. Function Button---This button is pushed for various lengths of time to initiate a call, hang up a call,pairing, transferring a call to a headset, and microphone mute.3. Volume Rocker Switch---The upper portion of this switch is pushed momentarily to INCREASE thereceive volume in steps and the lower portion of this switch is pushed momentarily to DECREASE thereceive volume in steps.The headset has the following visual indicator:Green LED in center of the Function Button---LED flashes at various rates and durations to indicate PowerON/OFF, Charging, Search & Pairing, BT Link Established, Standby Mode, and Audio Link (on a call).Red LED in center of the Function Button---LED flashes as above, but the red color indicates low batterystate.The headset has the following audio indicator:Tone in receiver---Tone varies in duration, duty cycle and frequency to indicate Volume Steps, VolumeMin, Volume Max, Low Battery, Microphone Mute, Incoming Call, and Pairing.
BT 300 User Manual3 of 6I BT300 Bluetooth Headset Operation---Preliminary1. The battery must be charged before using.2. To charge battery plug charger connector into rectangular Charge Jack located on edge of housingopposite microphone. (Note that the headset is not functional while charging). The LED will stay redduring charging and go green when charging is complete (and the charger is still plugged in).3. The headset is supplied for use on the right ear. For left ear use open the ear loop 90 degrees from theclosed position, carefully snap ear loop off of hinge, rotate 180 degrees and snap back onto hinge.II Pairing with Mobile Phone (Mobile phone must be Bluetooth compatible.)(Note: Pairing must be done every time the headset establishes a link with a different mobile phone or otherBluetooth compatible device)1. Verify power of mobile phone to be paired with is ON and phone is within 10 feet of headset.2. Headset must be powered off. Press and hold On/Off button for more than 5 seconds to switch headsetto pairing mode. Green LED is constantly ON.3. The green LED will flash fast ON & OFF when Bluetooth pairing has been completed.4. If pairing fails, the green LED will go OFF.III Receiving an Incoming Call1. Place the headset on your ear after switching it ON, placing the earhook over your ear, and close theearhook so the receiver is close to your ear. The microphone should be pointed toward your mouth.2. If there is an incoming call while the headset is ON and the devices are paired, the call willautomatically be answered by the headset. The Incoming Call Alert is 1 second of 700 Hz WarbleTone.3. When on a call, the green LED will flash at a rate of 1 second.4. To adjust the Receive Volume Up, momentarily press the upper end of the rocker switch one or moretimes until the desired level is achieved. A ½ second 2 kHz beep will be heard when the max volume isreached.5. To adjust the Receive Volume Down, momentarily press the lower end of the rocker switch one ormore times until the desired level is achieved. A ½ second 2 kHz beep will be heard when the minvolume is reached.IV Making an Outgoing Connection1. If the headset is powered up, dialing can be done from the cell phone or by Voice Dialing if available.2. Press the Function Button for more than 2 seconds and release. Dialing can be done from the cellphone or by Voice Dialing if available.
BT 300 User Manual4 of 6V Other Functions1. Low Battery Warning is indicated by five 50 millisecond 2 kHz beeps in the receiver every 20 seconds.This will start 10 minutes before the headset battery is out of power. The red LED warning will appearalready when half an hour of battery life is left.2. Out of Range is indicated by deterioration of audio quality (noisy signal) in the receiver.VI Storage1. Always store with power OFF and in a cloth or plastic bag to keep dust and lint out of microphone andspeaker openings.2. Avoid storage at high temperatures (above 60 C or 134 F), such as in a hot vehicle in direct sunlight.Storage at high temperatures can degrade performance and reduce battery life.3. Do not expose headset to rain or other liquids.VII Parts Replacement1. Battery: This product is equipped with a Lithium Rechargeable Battery. Replacement must be done ata qualified service center or returned to the manufacturer. Use only P/N xxxxxx battery2. AC Charger: Use only P/N xxxxxx3. Vehicular Charger: Use only P/N xxxxxxVIII Certification and Safety Approvals for BT300 Bluetooth Wireless HeadsetEU: This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC).Hereby, GN Netcom, declares that this this product is in compliance with the essentialrequirements and other relevant provisions of Directive 1999/5/EC.For further information please consult http://www.gnnetcom.com.Please note that this product uses radio frequency bands not harmonised within EU. Within the EUthis product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany,Greece, Ireland. Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdomand within EFTA in Iceland, Norway and Switzerland.FCC: This product has been tested to comply with FCC Standards and is For Home or Office Use.This product complies with FCC Part 15 as a Class B Computing Device.The FCC I.D. is BCE-BT300UL: This product is UL Listed ITE and complies with UL 60950, Canada and US.The UL File Number is E210538.IC: The IC ID is IC: 2386-BT300.
BT 300 User Manual5 of 6FCC and IC Notice to UsersThis device complies with part 15 of the FCC rules.Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesiredoperation.Changes or modifications not expressly approved by the party responsible for compliance could void theuser’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuantto part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may cause harmful interference toradio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.To prevent radio interference to the licensed service, this device is intended to be operated indoors andaway from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installedoutdoors is subject to licensing.The term “IC:” before the certification/registration number only signifies that registration was performedbased on a Declaration of Conformity indicating that Industry Canada technical specifications were met. Itdoes not imply that industry Canada approved the equipmentWarrantyGN Netcom, Inc warrants this product against all defects in material and workmanship for a period of oneyear from the date of original purchase. The conditions of this warranty and our responsibilities under thiswarranty are as follows:• The warranty is limited to the original purchaser.• The warranty is void if the serial number, date code label or product label is removed, or if the producthas been subject to physical abuse, improper installation, modification, or repair by unauthorized thirdparties.• The responsibility of GN Netcom, Inc products shall be limited to the repair or replacement of theproduct at the sole discretion of GN Netcom, Inc.• Any implied warranty on GN Netcom, Inc. products is limited to one year from the date of purchase onall parts, including the cords and connectors. Specifically exempt from any warranty are limited-lifeconsumable components subject to normal wear and tear, such as microphone windscreens, earcushions, ear tips, decorative finishes, batteries, and other accessories. GN Netcom, Inc. is not liablefor any incidental or consequential damages arising from the use or misuse of any GN Netcom, Inc.product.
BT 300 User Manual6 of 6• A copy of your receipt or other proof of purchase is required. Without proof of purchase, yourwarranty is defined as beginning on the date of manufacture as labeled on the product.• This warranty gives you specific rights and you may have other rights which vary from state to state.Unless otherwise instructed in the User Guide, the user may not, under any circumstances, attempt toperform service, adjustments or repairs on this unit, whether in or out of warranty. It must be returned tothe factory or authorized service agency for all such work.To Obtain ServiceFor customer service and technical support, call GN Netcom, Inc. at 1-800-826-4656If it becomes necessary to send a unit in for repair, it is not necessary to call for a Return MaterialAuthorization (RMA) number, as one will be assigned upon receipt of the package at the factory.Ship the product in a suitable shipping container, fully insured and with the shipping charges prepaid.Include the following with the product:• Your name, company name, address and telephone number.• A description of the problem.• A copy of the receipt or other proof of purchase is requested for in warranty products (without proof ofpurchase, your warranty will be defined as beginning on the date of manufacture as labeled on theproduct.)• For out of warranty products, send a purchase order which authorizes repair.In warranty products are warranted for the remainder of the original warranty period. Out of warrantyproducts will be repaired or replaced at the prevailing charge and carry a one-year warranty from the repairdate.GN Netcom, Inc will not assume any responsibility for any loss or damage incurred in shipping. Any repairwork on GN Netcom, Inc. products by unauthorized third parties voids any GN Netcom. Inc. warranty.Ship to: GN Netcom, Inc.77 Northeastern Blvd.Nashua, NH 03062

Navigation menu