GN Audio USA BT300 BT300 Bluetooth Headset User Manual example

Download:
Mirror Download [FCC.gov]
Document ID	267133
Application ID	A/+Y5sQ1QNYD+UM7X4qZqg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.53kB (19093 bits)
Date Submitted	2002-08-30 00:00:00
Date Available	2002-08-30 00:00:00
Creation Date	2002-07-11 09:09:44
Producing Software	Acrobat PDFWriter 5.0 for Windows NT
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual example.doc
Document Creator	Microsoft Word - Users Manual example
Document Author:	jbr.cph

BT 300 User Manual
BT300 BLUETOOTH WIRELESS HEADSET
USERS MANUAL
(July 2002, Preliminary)
GN Netcom
1 of 6
BT 300 User Manual
BT300 Bluetooth Wireless Headset Introduction
The BT300 Headset is a lightweight “over the ear” wireless headset utilizing Bluetooth technology in the
2.4 GHz band for a short range (up to 10 meters) RF link. The headset contains a microphone and a
receiver, and is intended for hands free communications with mobile telephones containing Bluetooth
compatibility or any other device that has a Bluetooth Audio Gateway.
Headset power is provided by a rechargeable battery. The battery can be charged with a vehicular charge
adapter or an AC charge adapter. Battery Life is approximately 4 hours {“Talk Time”) and 100 hours
standby (“Sniff”) time
The headset has the following user operated controls (see Figure 1):
1.
On/Off Switch---Press and hold to toggle state.
2.
Function Button---This button is pushed for various lengths of time to initiate a call, hang up a call,
pairing, transferring a call to a headset, and microphone mute.
3.
Volume Rocker Switch---The upper portion of this switch is pushed momentarily to INCREASE the
receive volume in steps and the lower portion of this switch is pushed momentarily to DECREASE the
receive volume in steps.
The headset has the following visual indicator:
Green LED in center of the Function Button---LED flashes at various rates and durations to indicate Power
ON/OFF, Charging, Search & Pairing, BT Link Established, Standby Mode, and Audio Link (on a call).
Red LED in center of the Function Button---LED flashes as above, but the red color indicates low battery
state.
The headset has the following audio indicator:
Tone in receiver---Tone varies in duration, duty cycle and frequency to indicate Volume Steps, Volume
Min, Volume Max, Low Battery, Microphone Mute, Incoming Call, and Pairing.
2 of 6
BT 300 User Manual
I BT300 Bluetooth Headset Operation---Preliminary
1.
The battery must be charged before using.
2.
To charge battery plug charger connector into rectangular Charge Jack located on edge of housing
opposite microphone. (Note that the headset is not functional while charging). The LED will stay red
during charging and go green when charging is complete (and the charger is still plugged in).
3.
The headset is supplied for use on the right ear. For left ear use open the ear loop 90 degrees from the
closed position, carefully snap ear loop off of hinge, rotate 180 degrees and snap back onto hinge.
II Pairing with Mobile Phone (Mobile phone must be Bluetooth compatible.)
(Note: Pairing must be done every time the headset establishes a link with a different mobile phone or other
Bluetooth compatible device)
1.
Verify power of mobile phone to be paired with is ON and phone is within 10 feet of headset.
2.
Headset must be powered off. Press and hold On/Off button for more than 5 seconds to switch headset
to pairing mode. Green LED is constantly ON.
3.
The green LED will flash fast ON & OFF when Bluetooth pairing has been completed.
4.
If pairing fails, the green LED will go OFF.
III Receiving an Incoming Call
1.
Place the headset on your ear after switching it ON, placing the earhook over your ear, and close the
earhook so the receiver is close to your ear. The microphone should be pointed toward your mouth.
2.
If there is an incoming call while the headset is ON and the devices are paired, the call will
automatically be answered by the headset. The Incoming Call Alert is 1 second of 700 Hz Warble
Tone.
3.
When on a call, the green LED will flash at a rate of 1 second.
4.
To adjust the Receive Volume Up, momentarily press the upper end of the rocker switch one or more
times until the desired level is achieved. A ½ second 2 kHz beep will be heard when the max volume is
reached.
5.
To adjust the Receive Volume Down, momentarily press the lower end of the rocker switch one or
more times until the desired level is achieved. A ½ second 2 kHz beep will be heard when the min
volume is reached.
IV Making an Outgoing Connection
1.
If the headset is powered up, dialing can be done from the cell phone or by Voice Dialing if available.
2.
Press the Function Button for more than 2 seconds and release. Dialing can be done from the cell
phone or by Voice Dialing if available.
3 of 6
BT 300 User Manual
V Other Functions
1.
Low Battery Warning is indicated by five 50 millisecond 2 kHz beeps in the receiver every 20 seconds.
This will start 10 minutes before the headset battery is out of power. The red LED warning will appear
already when half an hour of battery life is left.
2.
Out of Range is indicated by deterioration of audio quality (noisy signal) in the receiver.
VI Storage
1.
Always store with power OFF and in a cloth or plastic bag to keep dust and lint out of microphone and
speaker openings.
2.
Avoid storage at high temperatures (above 60 C or 134 F), such as in a hot vehicle in direct sunlight.
Storage at high temperatures can degrade performance and reduce battery life.
3.
Do not expose headset to rain or other liquids.
VII Parts Replacement
1.
Battery: This product is equipped with a Lithium Rechargeable Battery. Replacement must be done at
a qualified service center or returned to the manufacturer. Use only P/N xxxxxx battery
2.
AC Charger: Use only P/N xxxxxx
3.
Vehicular Charger: Use only P/N xxxxxx
VIII Certification and Safety Approvals for BT300 Bluetooth Wireless Headset
EU:
This product is CE marked according to the provisions of the R & TTE Directive (99/5/EC).
Hereby, GN Netcom, declares that this this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
For further information please consult http://www.gnnetcom.com.
Please note that this product uses radio frequency bands not harmonised within EU. Within the EU
this product is intended to be used in Austria, Belgium, Denmark, Finland, France, Germany,
Greece, Ireland. Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom
and within EFTA in Iceland, Norway and Switzerland.
FCC:
This product has been tested to comply with FCC Standards and is For Home or Office Use.
This product complies with FCC Part 15 as a Class B Computing Device.
The FCC I.D. is BCE-BT300
UL:
This product is UL Listed ITE and complies with UL 60950, Canada and US.
The UL File Number is E210538.
IC:
The IC ID is IC: 2386-BT300.
4 of 6
BT 300 User Manual
FCC and IC Notice to Users
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and
away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing.
The term “IC:” before the certification/registration number only signifies that registration was performed
based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. It
does not imply that industry Canada approved the equipment
Warranty
GN Netcom, Inc warrants this product against all defects in material and workmanship for a period of one
year from the date of original purchase. The conditions of this warranty and our responsibilities under this
warranty are as follows:
•
The warranty is limited to the original purchaser.
•
The warranty is void if the serial number, date code label or product label is removed, or if the product
has been subject to physical abuse, improper installation, modification, or repair by unauthorized third
parties.
•
The responsibility of GN Netcom, Inc products shall be limited to the repair or replacement of the
product at the sole discretion of GN Netcom, Inc.
•
Any implied warranty on GN Netcom, Inc. products is limited to one year from the date of purchase on
all parts, including the cords and connectors. Specifically exempt from any warranty are limited-life
consumable components subject to normal wear and tear, such as microphone windscreens, ear
cushions, ear tips, decorative finishes, batteries, and other accessories. GN Netcom, Inc. is not liable
for any incidental or consequential damages arising from the use or misuse of any GN Netcom, Inc.
product.
5 of 6
BT 300 User Manual
•
A copy of your receipt or other proof of purchase is required. Without proof of purchase, your
warranty is defined as beginning on the date of manufacture as labeled on the product.
•
This warranty gives you specific rights and you may have other rights which vary from state to state.
Unless otherwise instructed in the User Guide, the user may not, under any circumstances, attempt to
perform service, adjustments or repairs on this unit, whether in or out of warranty. It must be returned to
the factory or authorized service agency for all such work.
To Obtain Service
For customer service and technical support, call GN Netcom, Inc. at 1-800-826-4656
If it becomes necessary to send a unit in for repair, it is not necessary to call for a Return Material
Authorization (RMA) number, as one will be assigned upon receipt of the package at the factory.
Ship the product in a suitable shipping container, fully insured and with the shipping charges prepaid.
Include the following with the product:
•
Your name, company name, address and telephone number.
•
A description of the problem.
•
A copy of the receipt or other proof of purchase is requested for in warranty products (without proof of
purchase, your warranty will be defined as beginning on the date of manufacture as labeled on the
product.)
•
For out of warranty products, send a purchase order which authorizes repair.
In warranty products are warranted for the remainder of the original warranty period. Out of warranty
products will be repaired or replaced at the prevailing charge and carry a one-year warranty from the repair
date.
GN Netcom, Inc will not assume any responsibility for any loss or damage incurred in shipping. Any repair
work on GN Netcom, Inc. products by unauthorized third parties voids any GN Netcom. Inc. warranty.
Ship to: GN Netcom, Inc.
77 Northeastern Blvd.
Nashua, NH 03062
6 of 6

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 6
Creator                         : Microsoft Word - Users Manual example
Create Date                     : 2002:07:11 09:09:44
Title                           : Users Manual example.doc
Author                          : jbr.cph
Producer                        : Acrobat PDFWriter 5.0 for Windows NT

EXIF Metadata provided by EXIF.tools