GN Audio USA BT5010 Jabra BT5010 Bluetooth Headset User Manual

GN Netcom Inc Jabra BT5010 Bluetooth Headset Users Manual

Contents

Users Manual

Bluetooth headsetUser manualwww.jabra.com© 2006 Jabra, GN Mobile A/S (GN Netcom A/S). All rights reserved. Jabra® is a registered trademark of GN Mobile A/S (GN Netcom A/S). All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Mobile A/S (GN Netcom A/S) is under license.(Design and specifications subject to change without notice)Made in China
PART NUMBER RevA 81-00293 Phone Number: 0800 0327026Email Address: support.uk@jabra.comCustomer Contact Details:
RELEASE YOUR JABRA
2RELEASE YOUR JABRA3Jabra BT5010 Bluetooth headsetEnglishThank you .................................................3About your Jabra BT5010 ...................................3What your new headset can do . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4GETTING STARTED .........................................41. Charge your headset ...................................52. Turning your headset on and off ........................53. Pair it with your phone ..................................54. Wear it how you like it ..................................65. The sliding boom arm ..................................76. How to .................................................77. Battery Indicator ........................................88. What the lights mean ...................................99. Using a Jabra Bluetooth adapter ........................910. Troubleshooting & FAQ ............................... 1011. Need more help? ..................................... 1012. Taking care of your headset ........................... 1013. Warranty ............................................. 1114. Certification and safety approvals ..................... 1215. Glossary .............................................. 12Thank youThank you for purchasing the Jabra BT5010 Bluetooth headset. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your headset.Remember, driving comes rst, not the call!Using a mobile phone while driving can distract you and increase the likelihood of an accident. If driving conditions demand it (such as bad weather, high trac density, presence of children in the car, dicult road conditions), pull o the road and park before making or answering your calls. Also, try to make conversations short and do not make notes or read documents.Always drive safely and follow local laws.About your Jabra BT5010 1 Answer/end button2 Charge connector3 Earhook4 Volume up (default)5 Volume down (default)6 LED indicator light7 Sliding boom arm8 Microphone9 On/o pairing button10 SpeakerFig 164532178910
4RELEASE YOUR JABRA5Jabra BT5010 Bluetooth headsetWhat your new headset can doYour Jabra BT5010 lets you do all this: • Answer calls • End calls • Reject calls* • Voice Dialling* • Last number redialling* • Call waiting* • Put call on hold* • Mute • Enable/Disable vibrator* Phone dependentSpecications • Talk time up to 10 hours/standby time up to 240 hours • Rechargeable battery with charging option from AC power supply, PC via USB cable or car charger (not included) • Weight 20 grams • Battery indicator • Operating range up to 10 metres (approx. 33 feet) • Headset and hands-free Bluetooth proles • Bluetooth specication (see glossary) version 2.0GETTING STARTEDThe Jabra BT5010 is easy to operate. The answer/end button on the headset performs the dierent functions depending on how long you press it.Instruction: Duration of pressTap Press brieyPress Approx: 1 secondPress and hold Approx: 5 seconds1. Charge your headsetMake sure that your Jabra BT5010 headset is fully charged for two hours before you start using it. Use the AC adapter to charge from a power socket, or charge directly from your PC with the USB cable provided. Use only the chargers provided in the box – do not use chargers from any other devices as this might damage your Jabra BT5010. Connect your headset as shown in g 2. When the LED indicator light is solid red, your headset is charging. When the LED indicator light is green, it is fully charged.2. Turning your headset on and o • Press the on/o/pairing button to turn on your headset (see g 1). The LED will show the battery status to indicate the Jabra BT5010 is on (see section 7). • Press the on/o/pairing button to turn o your headset until you see a burst of ashes.3. Pair it with your phoneBefore you use your Jabra BT5010, you need to pair it with your mobile phone. 1. Put the headset in pairing mode • Make sure the headset is o. • Press the on/o/pairing button marked until the LED indicator light is solid blue. Fig 2
6RELEASE YOUR JABRA7Jabra BT5010 Bluetooth headset5. The sliding boom armThe sliding boom arm is used for answering and ending calls, but will also give an increased audio quality when extended. To answer an incoming call just extend the boom arm to an open position and to end to call slide the boom arm back to a closed position.The Jabra BT5010 can of course be used with the boom arm in both positions, but will provide the best audio quality when in the open position.2. Set your Bluetooth phone to ‘discover’ the Jabra BT5010 Follow your phone’s instruction guide. This usually involves going to a ‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from a typical mobile phone in g 3).Fig 3For optimal performance, wear the Jabra BT5010 and your mobile phone on the same side of your body or within line of sight. In general, you will get better performance when there are no obstructions between your headset and your mobile phone. (See g 5)3. Your phone will nd the Jabra BT5010 Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’ or ‘OK’ on the phone and conrm with the passkey or PIN = 0000 (4 zeros). Your phone will conrm when pairing is complete. In case of unsuccessful pairing, repeat steps 1 to 3.4. Wear it how you like itThe Jabra BT5010 is ready to wear on your right ear. If you prefer the left, pull out the earhook and rotate and insert as shown. (See g 4).Fig 4Fig 56. How to…Answer a call • Tap the answer/end button on your headset to answer a call or • Open the sliding boom arm to answer the callEnd a call • Tap the answer/end button to end an active call or • Close the sliding boom arm to end an active callMake a call • When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not allow this feature, tap on the Jabra BT5010’s answer/end button to transfer the call to the headset.Reject a call* • Press the answer/end button when the phone rings to reject an incoming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal.0.495
8RELEASE YOUR JABRA9Jabra BT5010 Bluetooth headset8. What the lights meanWhat you see What this means about your headsetSeries of ashes See Battery indicator (section 6)Flashing blue Incoming call and green lightFlashing blue light Flashing every second: active callFlashing blue light Flashing every three seconds: in standby mode (only for 1 minute then o)Flashing red light Running low on batterySolid green light Fully chargedSolid red light ChargingSolid blue light In pairing mode (see section 3)9. Using a Jabra Bluetooth adapter If you want to use the Jabra BT5010 with a non-Bluetooth mobile phone, the Jabra A210 adapter is the answer.It gives you a cordless connection with the following headset feature: answer/end call, voice dial function (if supported by the phone) and mute. Rejecting a call, last number redial and putting a call on hold might not be supported through the headset jack in the mobile phone.To pair the Jabra BT5010 with the Jabra A210The pairing process is a little dierent: • Put your Jabra BT5010 in pairing mode • Put the Jabra A210 adapter in pairing mode • Place them close together. You do not need a dedicated pin code to pair the two Jabra products. Consult the Jabra A210 adapter user manual for more information.Making/answering a call when using the Jabra A210 • When you make a call from your mobile phone, the call will automatically transfer to headset (if it is turned on) • To answer a call: either tap the answer/end button on your headset, open the boom arm or press the answer button on your mobile phoneActivate voice dialling* • Tap the answer/end button. For best results, record the voice-dialling tag through your headset. Please consult your phone’s user manual for more information about using this feature.Redial last number* • Press the answer/end button.Adjust sound and volume • Press the volume up or down (+ or -) to adjust the volume. (Volume up button are per default on top of the headset when worn on the right ear). • To mute, press both volume up and down at the same time. A low beep alert plays during a muted call. • To un-mute, tap either of the volume buttons.Call waiting and placing a call on hold* This lets you put a call on hold during a conversation and answer a waiting call. • Press the answer/end button once to put the active call on hold and answer the waiting call. • Press the answer/end button to switch between the two calls. • Tap the answer/end button to end the active conversation.* Functions marked with * are dependent on your phone supporting these features. Check your phone’s user manual for further information.Enable/disable vibrator • Press and hold both volume buttons in standby mode.Volume buttonsTo change the orientation of the volume buttons (default setting is for right ear wearing mode) • Press and hold the answer/end button in standby mode and tap the desired up button.7. Battery IndicatorWhen the Jabra BT5010 is turned on or a button is pressed more than 1 minute after last button press, the LED indicates the battery level of the headset.What you see Battery level4 Green ashes 75% - 100% Charged3 Green ashes 50% - 75% charged2 Green ashes 5% - 50% charged1 Red ash Less than 25% charged
10 RELEASE YOUR JABRA11Jabra BT5010 Bluetooth headset13. WarrantyJabra (GN Netcom) warrants this product against all defects in material and workmanship for a period of two years from the date of original purchase. The conditions of this warranty and our responsibilities under this warranty are as follows:• The warranty is limited to the original purchaser• A copy of your receipt or other proof of purchase is required• The warranty is void if the serial number, date code label or product label is removed, or if the product has been subject to physical abuse, improper installation, modication, or repair by unauthorized third parties• The responsibility of Jabra (GN Netcom) products shall be limited to the repair or replacement of the product at its sole discretion• Any implied warranty on Jabra (GN Netcom) products is limited to two years from the date of purchase on all parts, including any cords and connectors• Specically exempt from any warranty are limited-life consumable components subject to normal wear and tear, such as microphone windscreens, ear cushions, decorative nishes, batteries, and other accessories• Jabra (GN Netcom) is not liable for any incidental or consequential damages arising from the use or misuse of any Jabra (GN Netcom) product• This warranty gives you specic rights and you may have other rights which vary from area to area• Unless otherwise instructed in the User Manual, the user may not, under any circumstances, attempt to perform service, adjustments or repairs on this unit, whether in or out of warranty. It must be returned to the purchase point, factory or authorized service agency for all such work• Jabra (GN Netcom) will not assume any responsibility for any loss or damage incurred in shipping. Any repair work on Jabra (GN Netcom) products by unauthorized third parties voids any warranty10. Troubleshooting & FAQI hear crackling noises • For the best audio quality, always wear you headset on the same side of the body as the mobile phoneI cannot hear anything in my headset • Increase the volume on the headset. • Ensure that the headset is paired with the phone. • Make sure that the phone is connected to the headset – if it does not connect either from the phone’s Bluetooth menu or by tapping the answer/end button, follow the pairing procedure (See section 3).I have pairing problems even though my phone indicates otherwise • You may have deleted your headset pairing connection in your mobile phone. Follow the pairing instructions in section 3.Will the Jabra BT5010 work with other Bluetooth equipment? • The Jabra BT5010 is designed to work with Bluetooth mobile phones. It can also work with other Bluetooth devices that are compliant with Bluetooth version 1.1, 1.2 or 2.0 and support a headset and/or hands-free prole.I cannot use reject call, call on hold, redial or voice dialling • These functions are dependent on your phone supporting them. Please check you phone’s manual for further details. 11. Need more help?Jabra oers customer support online at www.jabra.com or you can see the inside cover for the support details of your country.12. Taking care of your headset• Always store the Jabra BT5010 with the power o and safely protected.• Avoid storage at extreme temperatures (above 45°C/113°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may aect operation. High temperatures may also degrade performance.• Do not expose the Jabra BT5010 to rain or other liquids.
12 RELEASE YOUR JABRA14. Certication and safety approvalsCEThis product is CE marked according to the provisions of the R & TTE Directive (99/5/EC). Hereby, GN Netcom, declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.For further information please consult http://www.jabra.comWithin the EU this device is intended to be used in Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, United Kingdom, and within EFTA in Iceland, Norway and Switzerland.BluetoothThe Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom is under license. Other trademarks and trade names are those of their respective owners.15. GlossaryBluetooth is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance (approx. 30 feet). Get more information at www.bluetooth.comBluetooth proles are the dierent ways that Bluetooth devices communicate with other devices. Bluetooth phones support either the headset prole, the hands-free prole or both. In order to support a certain prole, a phone manufacturer must implement certain mandatory features within the phone’s software.Pairing creates a unique and encrypted link between two Bluetooth devices and lets them communicate with each other. Bluetooth devices will not work if the devices have not been paired.Passkey or PIN is a code that you enter on your Bluetooth enabled device (e.g. a mobile phone) to pair it with your Jabra BT5010. This makes your device and the Jabra BT5010 recognize each other and automatically work together.Standby mode is when the Jabra BT5010 is passively waiting for a call. When you ‘end’ a call on your mobile phone, the headset goes into standby mode.Dispose of the product according to local standards and regulations. www.jabra.com/weee

Navigation menu