GN Audio USA GN7170 900MHz 40 channels Cordless Phone w/ CID User Manual Warrenty 170x135
GN Netcom Inc 900MHz 40 channels Cordless Phone w/ CID Warrenty 170x135
Contents
- 1. User Manual
- 2. FCC Information
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 468418 |
| Application ID | aPVeeZB11ewHxZJCbSaNTg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 159.42kB (1992761 bits) |
| Date Submitted | 2004-09-14 00:00:00 |
| Date Available | 2004-09-14 00:00:00 |
| Creation Date | 2004-08-26 11:22:31 |
| Producing Software | Acrobat Distiller 5.0.5 (Macintosh) |
| Document Lastmod | 2004-09-04 10:09:59 |
| Document Title | Warrenty_170x135 |
| Document Creator | QuarkXPress(tm) 5.01 |
| Document Author: | Louise |
Warranty_170x135_US_B
26/08/04
13:17
Side 1
North American Declaration & Warranty
Déclarations et garantie pour les Etats-Unis, le Canada et l´Amérique Latine
North
America
Warranty_170x135_US_B
26/08/04
13:17
Side 2
26/08/04
13:17
Side 3
USA Declaration
ACTA Required Customer Information
USA FCC part 15
For wireless products and telephones
For Telephones
FCC Notice to Users/Product Statements
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may
cause undesired operation.
Users are not permitted to make changes or modify the device in any way.
Warning: Changes or modifications not expressly approved by GN Netcom
will void the user’s authority to operate the equipment.
Applies to wireless products only
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Applies for wireless products with base station only
The user must place the base at least 8” (20cm) or more from any personnel and must not be co-loaded or operating in conjunction with any
other antenna or transmitter in order to comply with FCC RF exposure
requirements.
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by ACTA. On the bottom of this equipment is a label that
contains, among other information, a product identifier in the format US:
AAAEQ##TXXXX (see list at the end of this statement). If requested, this
number must be provided to the telephone company.
This equipment connects to (USOC) RJ11C modular jacks for network
connection.
A plug and jack used to connect this equipment to the premises wiring
and telephone network must comply with the applicable FCC Part 68 rules
and requirements adopted by ACTA. A compliant telephone and plug is
provided with this product. It is designed to be connected to a compatible modular jack that is also compliant.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may
result in the devices not ringing in response to an incoming call. In most
but not all areas, the sum of the RENs should not exceed (5.0). To be
certain of the number of devices that may be connected to a line, as
determined by the total RENs, contact the local telephone company.
If your home has specialty wired alarm equipment connected to the telephone line, ensure the installation of this device does not disable your
alarm equipment. If you have questions about what will disable alarm
equipment, consult your telephone company or a qualified installer.
If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of
service may be required. But if advance notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you
will be advised of your right to file a complaint with the FCC if you believe
it is necessary.
The telephone company may make changes in its facilities, equipment,
operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advanced
English
Warranty_170x135_US_B
Warranty_170x135_US_B
26/08/04
13:17
Side 4
notice in order for you to make necessary modifications to maintain
uninterrupted service.
If this equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until
the problem is solved.
Connection to party line service is subject to state tariffs. Contact the
state public utility commission, public service commission or corporation
commission for information.
operations or procedures that could affect the operation of the equipment.
If this happens the telephone company will provide advanced notice in
order for you to make necessary modifications to maintain uninterrupted
service.
If this equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until
the problem is solved.
There are no repairs that the customer can perform. Defective units
must be returned to GN Netcom for repair.
NOTICE: If your home has specially wired alarm equipment connected to
the telephone line, ensure the installation of this [equipment ID] does
not disable your alarm equipment. If you have questions about what will
disable alarm equipment, consult your telephone company or a qualified
installer.
Products covered under this statement
Product
Product Identifier
GN 4140, GN 4150, GN 5140
US:1LSKXNANGN4150
GN 5150
US:1LSUSA-43526-KX-N
There are no repairs that the customer can perform. Defective units
must be returned to GN Netcom for repair.
Canada Declaration
Products covered under this statement
Product
Product Identifier
GN 4170
US:1LSTE07A-GN4170
GN 7170
US:1LSW900B-GN7170
For wired telephone headset amplifiers
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by ACTA. On the bottom of this equipment is a label that
contains, among other information, a product identifier (see list at the
end of this statement). If requested, this number must be provided to
the telephone company.
If this equipment causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of
service may be required. But if advance notice isn’t practical, the
telephone company will notify the customer as soon as possible. Also,
you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
The telephone company may make changes in its facilities, equipment,
IC Notice to Users/Product Statements
Operation is subject to the following two conditions:
(1) This device may not cause interference and (2) This device must
accept any interference, including interference that may cause undesired
operation of the device.
The term “IC:” before the certification/registration number only signifies
that registration was performed based on a Declaration of Conformity
indicating that Industry Canada technical specifications were met. It
does not imply that industry Canada approved the equipment.
Canada Terminal equipment
IC Notice to Users/Product Statements
NOTICE: This equipment meets the applicable Industry Canada Terminal
Equipment Technical Specifications. This is confirmed by the registration
number.
The Ringer Equivalence Number (REN) assigned to each terminal device
provides an indication of the maximum number of terminals allowed to
be connected to a telephone interface. The termination of an interface
26/08/04
13:17
Side 5
may consist of any combination of devices subject only to the requirement that the sum of the ringe equivalence numbers of all the devices
does not exceed 5.
Repairs to certified equipment should be coordinated by a representative
designated by the supplier. Any repairs or alterations made by the user
to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the
equipment.
Users should ensure for their own protection that the electrical ground
connections of the power utility, telephone lines and internal metallic
water pipe system, if present, are connected together. This precaution
may be particularly important in rural areas. Caution: Users should NOT
attempt to make such connections themselves, but should contact the
appropriate electric inspection authority, or electrician, as appropriate.
Cautionary Notes to Computer Users:
When using any headset with a computer, care should be taken in dry or
low humidity environments to protect the user from electrostatic discharge from the monitor (CRT). Computer monitors can induce a substantial electrostatic charge when turned on or off, or when there is a
power failure, and the resulting electrostatic discharge can be passed
through the headset to ground. A user in close proximity to or touching
the computer may feel a common “shock” sensation, similar to touching
a door knob after walking across a carpet, causing no harm to the user.
This discharge is entirely due to the computer monitor, the headset is
merely the shortest path to ground.
To minimize the possibility of electrostatic discharge through the
headset, you can:
• Use a grounded screen in front of the monitor.
• Use static dissipative wrist straps.
• Increase the relative humidity in the room to 60% or more.
• Install static dissipative carpets or floor covering.
• Remove the headset before turning the computer on or off.
GN Netcom products meet OSHA, FCC and CSA standards.
USA / Canada Warranty
Limited Warranty
GN Netcom warrants to the original consumer purchaser that, except for
the limitations and exclusions set forth below, the product shall be free
from defects in materials and workmanship for a period of one (1) year
from the date of original retail purchase (“Warranty Period”). The obligation of GN Netcom under this warranty shall be limited to repair or
replacement, at GN Netcom option, without charge, of any part or unit
that proves to be defective in material or workmanship during the
Warranty Period, provided the product is returned to GN Netcom at the
address listed under “How to Obtain Warranty Repairs.” Except as modified by applicable State Law, this warranty sets forth the extent and limit
of GN Netcom obligation to the purchaser and or user of the product.
Exclusions from Warranty
This warranty applies only to defective factory material and factory
workmanship. Any conditions caused by accident, abuse, misuse or
improper operation in violation of instructions furnished by GN Netcom
destruction or alteration, improper electrical voltages or currents, or repair or maintenance attempted by anyone other than GN Netcom is not
a “defect” covered by this Warranty. In such cases, GN Netcom may
charge you for materials and labor, even during the Warranty Period. It is
the owner’s responsibility to operate and care for this product in
accordance with the operating instructions and specifications supplied
with the product; and repairs resulting from failure to do so are not
covered by the Warranty.
The warranty is void if the serial number, date code label, or product
label is removed.
The following parts are considered to be subject to wear and tear in
normal usage and are not covered by the Warranty: earhooks, decorative
finishes and all foam products (earpads, eargels, microphone covers.
Implied Warranty
Under state law, you may be entitled to the benefit of certain implied
warranties. These implied Warranties will continue in force only during
the Warranty Period. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
English
Warranty_170x135_US_B
Warranty_170x135_US_B
26/08/04
13:17
Side 6
Incidental or Consequential Damages
Neither GN Netcom nor your retail dealer or selling distributor has any
responsibility for any incident or consequential damages including, without limitation, commercial loss, or for any incidental expenses, loss of
time, or inconvenience. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
Other Legal Rights
This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
How to Obtain Warranty Repairs
For customer service and technical support, call GN Netcom at
1-800-826-4656 or 1-603-598-1100.
To obtain Warranty repairs, return your unit, shipping prepaid, direct to:
In USA:
GN Netcom
77 Northeastern Blvd.
Nashua, NH 03062 USA
In Canada:
GN Netcom
1515 Matheson Blvd., Unit 104
Mississauga, Ontario L4W 2P5
Please use the original container, if possible, or pack the unit in a sturdy
carton with sufficient packing material to prevent shipping damage. Include the following information:
1. Your name, company name, address and telephone number.
2. A description of the problem.
3. A copy of your purchase receipt indiciating the model number and
date of purchase. Without proof-of-purchase, your warranty is defined
as beginning on the date of manufacture as labeled on the product.
For out-of-warranty products, also include:
1. A purchase order authorizing repair.
During the Warranty Period, shipping charges for return to you will be
paid by GN Netcom for a unit requiring any repair covered by the
Warranty. Return shipping will be charged to the customer during the
Warranty Period for a unit requiring no Warranty repair. These shipping
charges will be prepaid by GN Netcom and billed to the customer.
Damage occurring during shipment is deemed the responsibility of the
carrier, and any claim should be made directly to such carrier.
Warranty_170x135_US_B
26/08/04
13:17
Side 7
Déclarations pour les États-Unis
États-Unis – FCC partie 15
Produits sans fil et téléphones
Notification de la FCC aux usagers/Déclarations relatives au produit
Ce dispositif est conforme à la partie 15 de la réglementation FCC. Son
utilisation est soumise aux deux conditions suivantes:
(1) Ce dispositif ne doit causer aucune interférence nuisible et (2) Ce
dispositif doit accepter toute interférence reçue, y compris celles susceptibles d’avoir des effets indésirables sur son fonctionnement.
Les utilisateurs ne sont pas autorisés à modifier le dispositif de quelque
façon que ce soit. Tout changement ou modification non expressément
approuvé par GN Netcom annulera le droit de l’utilisateur à faire usage
de l’équipement.
l'utilisateur doit placer la base à 20 cm au moins des personnes et ne
pas la charger ni l'utiliser avec un(e) quelconque autre transmetteur ou
antenne.
Information du client conformément aux exigences de l'ACTA
Téléphones
Cet équipement est conforme à la partie 68 de la réglementation FCC et
aux exigences de l'ACTA. Une étiquette comportant, entre autres, la référence du produit (voir liste à la fin de cette déclaration) est apposée sous
le dispositif. Si nécessaire, cette référence doit être transmise à l'opérateur téléphonique.
Cet équipement peut être raccordé aux prises modulaires RJ-11 pour
raccordement à un réseau.
Produits sans fil uniquement
Produits sans fil avec base uniquement
Pour respecter les critères d'exposition aux radiofréquences de la FCC,
Les fiches et prises utilisées pour raccorder cet équipement au réseau
électrique et téléphonique des locaux doivent être conformes à la partie
68 de la réglementation FCC et aux exigences de l'ACTA. Un téléphone et
une fiche conformes sont fournis avec le produit. Ceux-ci sont conçus
pour être raccordés à une prise modulaire compatible et conforme.
Le nombre équivalent de sonneries (REN) permet de déterminer le nombre de dispositifs pouvant être reliés à une ligne téléphonique. Si le REN
est trop élevé pour la ligne téléphonique concernée, les appareils pourront ne pas sonner lors des appels entrants. Dans la plupart des zones,
la somme des REN ne doit pas excéder 5. Pour vous assurer que le nombre de dispositifs pouvant être reliés à la ligne, que vous avez obtenu en
faisant la somme des REN, est correct, veuillez contacter votre opérateur
téléphonique local.
Si votre habitation est équipée d'un système d'alarme relié à la ligne
téléphonique, assurez-vous que l'installation de ce dispositif ne désactive pas votre alarme. Pour toute question concernant les matériels
susceptibles de désactiver votre système d'alarme, veuillez consulter
votre opérateur téléphonique ou un installateur agréé.
Si cet équipement endommage le réseau téléphonique, l'opérateur téléphonique vous avertira à l'avance d'une éventuelle interruption temporaire du service. Si cela n'est pas possible en pratique, l'opérateur télé-
Français
Note: cet équipement a été testé et respecte les limites applicables aux
dispositifs numériques de Classe B, conformément à la partie 15 de la
réglementation FCC. Ces limites visent à garantir une protection
raisonnable contre les interférences nuisibles dans les installations résidentielles.
Cet équipement génère, utilise et peut diffuser de l’énergie radioélectrique. S’il n’est pas installé et utilisé conformément à son mode d’emploi, il peut causer des interférences nuisibles avec les radiocommunications. Toutefois, le constructeur ne peut garantir qu’aucune interférence
ne se produira dans une installation particulière. Si cet équipement
cause des interférences nuisibles avec la réception d’appareils de radio
ou de télévision, ce qui peut être déterminé en éteignant puis rallumant
les appareils, l’utilisateur peut tenter d’y remédier en prenant l’une ou
plusieurs des mesures ci-dessous:
• Réorienter ou déplacer l’antenne de réception.
• Mieux séparer l’équipement du récepteur.
• Raccorder l’équipement à une prise reliée à un circuit différent de celui
auquel est relié le récepteur.
• Demander de l’aide à son revendeur ou à un technicien de radio/télévision qualifié.
Warranty_170x135_US_B
26/08/04
13:17
Side 8
phonique vous avertira dès que possible. Vous serez aussi informé de
votre droit à déposer une réclamation auprès de la FCC si vous le jugez
nécessaire.
Si cet équipement endommage le réseau téléphonique, l'opérateur téléphonique pourra vous demander de le déconnecter jusqu'à ce que le
problème soit résolu.
L'opérateur téléphonique peut apporter à ses installations, équipements,
opérations ou procédures des modifications susceptibles d'affecter le
fonctionnement de cet équipement. Dans ce cas, il vous préviendra à
l'avance afin que vous puissiez prendre les mesures nécessaires pour
assurer la continuité du service.
Aucune réparation ne peut être effectuée par le client. Les appareils
défectueux doivent être renvoyés à GN Netcom pour réparation.
Si cet équipement endommage le réseau téléphonique, l'opérateur téléphonique pourra vous demander de le déconnecter jusqu'à ce que le
problème soit résolu.
Produits concernés par cette déclaration
Produit
Référence produit
GN 4140, GN 4150, GN 5140
1LSKXNANGN4150
GN 5150
1LSUSA-43526-KX-N
Déclarations pour le Canada
Aucune réparation ne peut être effectuée par le client. Les appareils
défectueux doivent être renvoyés à GN Netcom pour réparation.
Produits concernés par cette déclaration
Produit
Référence produit
REN
GN 4170
1LSTE07AGN4170
0,7
Systèmes micro-casque/amplificateur pour téléphones fixes
Cet équipement est conforme à la partie 68 de la réglementation FCC et
aux exigences de l'ACTA. Une étiquette comportant, entre autres, la référence du produit (voir liste à la fin de cette déclaration) est apposée sous
le dispositif. Si nécessaire, cette référence doit être transmise à l'opérateur téléphonique.
Si cet équipement endommage le réseau téléphonique, l'opérateur
téléphonique vous avertira à l'avance d'une éventuelle interruption
temporaire du service. Si cela n'est pas possible en pratique, l'opérateur
téléphonique vous avertira dès que possible. Vous serez aussi informé
de votre droit à déposer une réclamation auprès de la FCC si vous le
jugez nécessaire.
L'opérateur téléphonique peut apporter à ses installations, équipements,
opérations ou procédures des modifications susceptibles d'affecter le
fonctionnement de cet équipement. Dans ce cas, il vous préviendra à
l'avance afin que vous puissiez prendre les mesures nécessaires pour
assurer la continuité du service.
Notification d’IC aux usagers/Déclarations relatives au produit
L’utilisation est soumise aux deux conditions suivantes:
(1) Ce dispositif ne doit causer aucune interférence et (2) Ce dispositif
doit accepter toutes les interférences, y compris celles susceptibles
d’avoir des effets indésirables sur son fonctionnement.
La mention “IC:” placée avant le numéro de certification/agrément signifie uniquement que l’agrément a été accordé sur la base d’une déclaration de conformité indiquant que les spécifications techniques d’Industry
Canada sont satisfaites. Elle ne signifie pas qu’Industry Canada a homologué l’équipement.
Équipements terminaux au Canada
Notification d’IC aux usagers/Déclarations relatives au produit
NOTIFICATION: cet équipement est conforme aux spécifications
techniques d’Industry Canada relatives aux équipements terminaux. Le
numéro d’agrément atteste de cette conformité.
Le nombre équivalent de sonneries (REN) attribué à chaque équipement
terminal permet de connaître le nombre maximum de terminaux pouvant
être connectés à une interface téléphonique. Une interface peut se
terminer par une combinaison quelconque de dispositifs à condition que
la somme du nombre équivalent de sonneries de tous les dispositifs
n'excède pas cinq.
26/08/04
13:17
Side 9
La réparation des équipements homologués devra être coordonnée par
un représentant désigné par le fournisseur. Toute réparation ou dégradation de l'équipement par l'utilisateur, ou tout dysfonctionnement de l'équipement, pourront justifier une demande de déconnexion de l'équipement par l'opérateur de télécommunication.
• Installer des tapis/moquettes ou revêtements de sol antistatiques.
• Retirer le micro-casque avant d'allumer/éteindre l'ordinateur.
Les produits GN Netcom sont conformes à l'ensemble des normes OSHA,
FCC et CSA.
Pour sa propre sécurité, l'utilisateur doit s'assurer que les systèmes de
mise à la terre de l'installation électrique, des lignes téléphoniques et du
réseau de canalisations interne du bâtiment, le cas échéant, sont raccordés les uns aux autres. Cette précaution peut se révéler particulièrement
importante dans les zones rurales. Attention: l'utilisateur NE DOIT PAS
tenter d'effectuer lui-même de tels raccordements. Il doit contacter les
services de contrôle électrique compétents ou un électricien, selon le
cas.
Garantie pour les États-Unis/le Canada
Note de mise en garde aux utilisateurs
d'ordinateurs
En cas d'utilisation d'un micro-casque avec un ordinateur dans un environnement sec ou faiblement humide, il est important de protéger l'utilisateur contre les décharges électrostatiques provenant de l'écran (CRT).
En effet, les écrans d'ordinateur peuvent produire une charge électrostatique importante lors de leur mise sous/hors tension ou en cas de coupure de courant et la décharge électrostatique qui en résulte peut être
transmise à la terre par l'intermédiaire du micro-casque. Un utilisateur
situé dans le voisinage immédiat ou au contact de l'ordinateur pourra
éprouver une sensation de “choc” semblable à celle ressentie en touchant une poignée de porte métallique après avoir marché sur une moquette. Toutefois, ce phénomène n'est pas dangereux pour l'utilisateur.
Cette décharge est entièrement due à l'écran de l'ordinateur. Le microcasque constitue simplement le chemin le plus rapide vers la terre.
Pour minimiser les risques de transmission des décharges électrostatiques par le micro-casque, vous pouvez:
• Installer un blindage mis à la terre devant l'écran de l'ordinateur.
• Utiliser des bracelets antistatiques.
• Maintenir dans la pièce une humidité relative supérieure ou égale à
60%.
Garantie limitée
GN Netcom garantit à l'acheteur-utilisateur initial que, à l'exception des
restrictions et des exclusions exposées ci-dessous, le produit est exempt
de défauts de matériaux et de fabrication pour une période de un (1) an
à compter de la date d'achat chez un détaillant ("Période de garantie").
Les obligations de GN Netcom au titre de cette garantie sont limitées à
la réparation ou au remplacement, aux frais de GN Netcom et à son gré,
de toute pièce ou élément défectueux en termes de matériel ou de fabrication pendant la période de garantie, sous réserve que le produit soit
retourné à GN Netcom, à l'adresse indiquée dans la rubrique "Comment
faire réparer votre appareil sous garantie". Sauf disposition contraire des
lois en vigueur dans l'État concerné, cette garantie précise l'étendue et
les restrictions des obligations de GN Netcom envers l'acheteur et/ou
l'utilisateur du produit.
Exclusions de garantie
Cette garantie s'applique uniquement en cas de défaut matériel ou de
fabrication. Ne constitue pas un "défaut" couvert par cette garantie
toute dégradation résultant d'un accident, d'un usage anormal, incorrect
ou impropre non conforme aux instructions de GN Netcom, d'une destruction ou d'une altération, de tensions ou de courants électriques inadaptés, ou de tentatives de réparation ou de maintenance par toute
personne n'appartenant pas à GN Netcom. Dans ce cas, GN Netcom est
en droit de vous faire payer les matériaux et la main-d'œuvre, y compris
en période de garantie. Il est de la responsabilité du propriétaire d'utiliser et d'entretenir ce produit conformément à la notice d'utilisation et
aux spécifications qui l'accompagnent. Les réparations résultant du
non-respect de ces obligations ne seront pas couvertes par la garantie.
La garantie sera annulée si le numéro de série, l'étiquette indiquant le
code date de fabrication ou l'étiquette du produit ne figurent pas sur le
dispositif.
Français
Warranty_170x135_US_B
Warranty_170x135_US_B
26/08/04
13:17
Side 10
Les composants suivants sont considérés comme sujets aux détériorations et à l'usure induites par un usage normal et ne sont donc pas couverts par la garantie: contours d'oreille, finitions décoratives et tous accessoires en mousse (oreillettes, protections du microphone, etc.).
Garantie implicite
Selon la loi en vigueur dans votre État, vous bénéficiez peut-être de certaines garanties implicites. Ces garanties implicites ne seront applicables
que pendant la période de garantie. Certains États n'autorisent aucune
restriction de durée de la garantie implicite. Dans ce cas, vous n'êtes pas
concerné par la restriction mentionnée ci-dessus.
Dommages accessoires ou consécutifs
Ni GN Netcom ni votre détaillant ou fournisseur ne sont responsables
des éventuels dommages accessoires ou consécutifs, y compris mais de
façon non limitative les préjudices commerciaux, les frais accessoires, les
pertes de temps ou les préjudices secondaires. Certains États n'autorisent aucune exclusion ni restriction des dommages accessoires ou
consécutifs. Dans ce cas, vous n'êtes pas concerné par la restriction ou
exclusion ci-dessus.
Autres garanties juridiques
Cette garantie vous donne droit à des garanties juridiques spécifiques.
De plus, vous bénéficiez éventuellement d'autres garanties, variables
selon les États.
Comment faire réparer votre appareil sous garantie
Pour contacter le service client et l'assistance technique, appelez
GN Netcom au
1-800-826-4656 ou 1-603-598-1100.
Pour bénéficier de réparations sous garantie, veuillez envoyer votre
appareil en port payé directement à l'adresse suivante:
Aux États-Unis:
GN Netcom
77 Northeastern Blvd.
Nashua, NH 03062
États-Unis
Au Canada:
GN Netcom
1515, Matheson est, pièce 104
Mississauga (Ontario) L4W 2P5
Canada
Utilisez l'emballage d'origine, si possible, ou emballez soigneusement
l'appareil dans un carton suffisamment solide pour éviter tout dommage.
Veuillez également fournir les éléments suivants:
1. Votre nom, nom de la société, adresse et numéro de téléphone.
2. Motif du retour.
3. Copie du justificatif d'achat indiquant le numéro de référence du
modèle et la date d'achat. En l'absence de justificatif d'achat, votre
garantie prendra effet à la date de fabrication indiquée sur l'étiquette
du produit.
Pour les produits hors garantie, veuillez également joindre:
1. Bon de commande autorisant la réparation.
Pendant la durée de la période de garantie, les frais de réexpédition de
l'appareil seront pris en charge par GN Netcom si les réparations sont
couvertes par la garantie. Toujours pendant la période de garantie, les
frais de réexpédition seront à la charge du client si l'appareil nécessite
des réparations non couvertes par la garantie. Ces frais d'expédition seront prépayés par GN Netcom et facturés au client. Tout dommage causé
au cours du transport engage la responsabilité du transporteur et toute
plainte devra être adressée directement à ce transporteur.
Informations complémentaires et caractéristiques techniques:
www.gnnetcom.com
GN Netcom, Inc.
77 Northeastern Boulevard
Nashua, NH 03062
États-Unis
Tél. : 1-800-826-4656
Tél. : 1-603-598-1100
Fax : 1-603-598-1122
Warranty_170x135_US_B
26/08/04
13:17
Side 11
Warranty_170x135_US_B
26/08/04
13:17
Side 12
For more information and technical specifications:
www.gnnetcom.com
GN Netcom, Inc.
77 Northeastern Boulevard
Nashua, NH 03062
USA
Tel:
1-800-826-4656
Tel:
1-603-598-1100
Fax:
1-603-598-1122
81-00046
User guide
Bedienungsanleitung
ES
Manual del usuario
Guide d’utilisation
NL
Gebruikersshandleiding
Guia do utilizador
Istruzioni d’uso
DK
Brugsanvisning
Bruksanvisning
FIN
Käyttöohje
81-00057 A Rev. B
GN7170_userguide.ind 1
13/08/04 9:55:24
English – GN 7170 user guide
This user guide provides you with information and instructions on
assembling, using and maintaining your GN 7170. This guide contains the
following sections:
Contents
1. Product information GN 7170 ................................ 4
1.1 Parts and signatures
2. Setting up ............................................................. 5
2.1 Telephone jack requirements
2.2 Installation prerequisites and guidelines
2.3 Connecting battery
2.4 Attaching belt clip
2.5 Connecting AC (electrical) power
2.6 Connecting the telephone line and switching
the unit on
2.7 Assembling and connecting the headset stand
and headset
3. Features & customization ...................................... 7
3.1 Language setting selection
3.2 Area code selection
3.3 Ringer tone selection
3.4 Default setting selection
3.5 Activating custom calling features:
FLASH/PROGRAM button
3.6 Wearing styles: headband or earwrap
4. Operating the GN 7170 .......................................... 8
4.1 Making/answering and ending calls
4.2 Redial
4.3 CHARGE/IN USE indicator
4.4 Muting the microphone
4.5 Clearing static interference: CHANNEL button
4.6 Temporary Tone Dialing
4.7 Canceling instruction *TONE/CANCEL button
4.8 Locating misplaced handset
4.9 Ringer switch
4.10 Volume
4.11 Call Timer
5. Caller ID features .................................................. 10
5.1 Call Waiting Caller ID
5.2 Receiving and Storing CID Records
5.3 Reviewing CID Records
GN7170_userguide.ind 2
13/08/04 9:55:25
6. Transferring CID records to memory ....................... 11
6.1 Transferring a CID record to your GN 7170´s memory
6.2 Replacing a CID record´s memory location in your
GN 7170´s memory
6.3 Deleting the current CID record
6.4 Deleting all CID records
6.5 Dialing a Caller ID number
6.6 Changing the CID number format
7. Memory function ................................................... 12
7.1 Storing a name and number in memory
7.2 Changing a stored number
7.3 Storing a redial number
7.4 Dialing a stored number
7.5 Inserting a pause in the dialing sequence
7.6 Reviewing and deleting numbers
7.7 Chain dialing from the memory
8. Display messages and sound signals ...................... 15
8.1 Display message table
8.2 Sound signals table
9. Frequently asked questions ................................... 16
10. Operational and safety informations ..................... 17
10.1 Changing the battery
10.2 Battery precautions
10.3 General product care
GN7170_userguide.ind 3
13/08/04 9:55:25
1. Product information GN 7170
The GN 7170 is as a telephone-headset solution, combining all the benefits of a full-featured wireless telephone and a headset. The wireless GN 7170 offers full Caller ID (CID) features (identifies
callers before you answer the phone, displays the time and date of each call, records up to 40
Caller ID messages sequentially and keeps records of missed calls while away).
The wireless GN 7170 also gives you full mobility in the office during your calls, increased work
productivity thanks to hands-free multitasking productivity and all the health benefits associated
with use of a headset.
Note: In order to fully benefit from the GN 7170’s Caller ID (CID) features, you must subscribe
to either the standard Name/Number Caller ID service or Call Waiting Caller ID services, which are
provided by your local telephone network provider.
Parts and signatures
1 Base unit
1a Page button
1b CHARGE/IN USE indicator
2 Cordless phone
Headset (with two wearing styles)
Headset stand
AC/DC power adapter
Telephone line cord
Belt clip
8 Headband
9 Earwrap
10 Ear cushion
11 Mute switch
10
1a
1b
11
GN7170_userguide.ind 4
13/08/04 9:55:28
2 Cordless phone
2a Display
2b Volume controls
or
2c Redial button
2d Headset cord receptor
2e Memory (MEM) button
2f Tone button
2g Delete/Channel button
2h Call back/Talk button
2i Format button
2j Ringer Off/ON button
2k Program/Flash button
*Battery
*The battery is located inside the GN 7170 cordless
phone battery compartment and must be connected
correctly prior to charging.
2a
2b
2c
2h
2d
2i
2e
2j
2f
2k
2g
2. Setting up
Before beginning installation, ensure that the following prerequisites and guidelines are noted.
2.1 Telephone jack requirements
To use the GN 7170, you need an RJ11C type modular telephone jack. If you don’t have a modular
jack, contact your corporate telephone network administrator and/or your local telephone service
provider.
Installation prerequisites
• Never install telephone wiring during a lightening storm.
• Never install telephone jacks in wet locations unless the jack is specifically designed for wet
locations.
• Never touch non-insulated telephone wires or terminals, unless the telephone line has been
disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any equipment connected to the phone lines such as faxes, other phones
or modems.
2.2 Installation guidelines
• Install the GN 7170 near both a telephone (modular) jack and an electrical outlet.
• Avoid sources of noise and RF emission, such as a window by a busy street, such as electric motors, microwave ovens and fluorescent lighting, computer monitors and other cordless
phone.
• Avoid heat sources, such as heating air ducts, heating appliances, radiators and direct sunlight.
• Avoid areas of excessive moisture or extremely low temperature.
• Avoid dusty locations.
About frequency interference. Some cordless telephones operate at frequencies that may cause
interference to nearby TVs, microwave ovens or VCRs. To minimize or prevent such interference,
the GN 7170’s base unit should not be placed near or on top of such appliances. If you experience interference, move your GN 7170’s base unit further away from such interference-causing
appliances.
GN7170_userguide.ind 5
13/08/04 9:55:38
About the GN 7170’s digital security system. Your GN 7170 uses a digital security system to provide protection against false ringing, unauthorized access and charges to your phone line. When
you place the handset into the base unit, the GN 7170 verifies its built-in security code. After a
power outage or battery change, place the cordless phone into the base unit for about 20 seconds
to automatically reset the built-in security code.
2.3 Connecting battery
Connect the battery by completing the following:
1. Remove the battery compartment door on the cordless phone.
2. Plug the battery cord into the jack located on the inside battery
compartment.
3. Replace the battery compartment door.
2.4 Attaching belt clip
Attach the belt clip by completing the following:
1. Insert the sides of the belt clip into the slots on each side of
the handset.
2. Snap the ends of the belt clip into place.
2.5 Connecting AC/DC (electrical) power
Note: Before using your GN 7170, you must allow it to charge for
12 hours prior to first use. If you don’t fully charge the GN 7170, battery
performance will be compromised.
Do not connect the GN 7170’s telephone line to the modular jack
until the GN 7170 has fully charged for 12 hours.
To connect the electrical supply, complete the following:
1. Plug the AC/DC power adapter into the back of the GN 7170’s base unit.
2. Plug the other end of the AC/DC power adapter into an electrical outlet.
• The CHARGE/IN USE indicator will turn on, verifying that the battery is charging.
• The CHARGE/IN USE indicator will not turn on if the cordless phone is not placed
in the base correctly.
2.6 Connecting the telephone line and switching the unit on
To connect the telephone line and switch on the unit, complete the following:
1. Plug the GN 7170’s telephone line cord into the TEL LINE jack on the
bottom of the base.
2. Plug the other end of the GN 7170’s telephone line cord into a modular
jack in the wall.
3. Set the cordless phone RINGER switch to the ON position.
4. Place the cordless phone into the base unit for charging.
2.7 Assembling and connecting the headset stand and headset
To assemble and connect the headset stand and headset to the cordless phone,
complete the following:
1. Insert the flat end of the stand into the slot on the bottom of
the base.
GN7170_userguide.ind 6
13/08/04 9:55:48
2. Gently snap on the headband around the headset receiver.
3. Insert the headset’s plug into the cordless phone headset jack.
4. Place the headset into the headset stand, or place the headband on your head so that it rests
comfortably on your head and that the ear cushion rests on your ear.
Note: The microphone on the boom arm should be pointed in the direction of your mouth.
3. Features and Customization
There are 5 programmable menus available: language, area code, ringer tone, tone/pulse dialing,
and default setting selection. We suggest you customize your GN 7170 in this order:
3.1 Language setting selection
1. Press the FLASH/PROGRAM button until 1ENG 2FRA 3ESP shows in the display.
1ENG is the default position.
2. Use the
or
button (or the number keypad) to scroll to your selection.
3. Press the FLASH/PROGRAM button to store the selection.
3.2 Area code selection
To select the area code, complete the following:
1. Press the FLASH/PROGRAM button until AREA CODE shows in the display.
• --- is the default setting.
2. Use the number keypad to enter your 3-digit area code.
Note: If you make a mistake, press the CH/DELETE button to erase the wrong area code.
Repeat step 2.
3. Press the FLASH/PROGRAM button to store the selection.
3.3 Ringer tone selection
To select the ringer tone, complete the following:
1. Press the FLASH/PROGRAM button until RINGER/TONE shows in the display.
1 is the default position.
2. Use the
or
button (or the number keypad) to move the display’s arrow indicator to 1,
2 or 3.
3. Press the FLASH/PROGRAM button to store the selection.
Tone/pulse dialing selection
Note: The GN 7170 automatically defaults to touch-tone dialing. If you don’t know which type
of service you have, contact your corporate telephone network administrator and/or your local
telephone service provider.
To select tone/pulse dialing, complete the following:
1. Press the FLASH/PROGRAM button until 1TONE 2 PULSE shows in the display.
• 1TONE is the default position (touch-tone dialing).
2. Use the
or
button (or the number keypad) to move the display’s arrow indicator to
1TONE or 2 PULSE.
3. Press the FLASH/PROGRAM button to store the selection.
3.4 Default setting selection
If required, you may return your GN 7170 to its factory-set default settings by completing the
following:
1. Press the FLASH/PROGRAM button until DEFAULT shows in the display.
• 1 NO is the default setting.
GN7170_userguide.ind 7
13/08/04 9:55:52
2. Use the
or
button (or the number keypad) to move the display’s arrow indicator to 1
NO or 2 YES.
3. Press the FLASH/PROGRAM button to store the selection.
• You will hear a confirmation tone.
3.5 Activating custom calling features: FLASH/PROGRAM button
Pressing the FLASH/PROGRAM button will activate custom calling features such as call waiting or
call transfer. Such features are provided by your telephone operator.
Note: When accessing custom calling features, do not press the TALK/CALL BACK button as this
will hang up the call.
3.6 Wearing styles: headband or earwap
You may choose between a headband or earwrap wearing style for
your headset.
To attach an earhook:
1. Gently push on the foam side of the headset receiver with your thumb to
push out the headset receiver from the headband ring.
2. Insert the thin end of the flexible earhook into one of the earhook
clutches. There are 2 clutches, allowing you to wear the headset on
either ear.
To attach a headband:
3. Pull out the earwap from the retaining clutch.
4. Gently snap the headband around the headset receiver.
4. Telephone operation
4.1 Making/answering and ending calls
Before making/answering calls, note the following:
• The cordless phone must be out of its base unit to make/answer.
You can still receive calls with the cordless phone in its base.
• Placing the cordless phone into the base during a call will hang up the call.
• Keep the headset plugged into the cordless phone.
To
1.
2.
3.
make calls:
Remove the cordless phone from the base unit (if not out).
Press the TALK/CALL BACK button on the cordless phone.
Dial the desired number.
Note: You may also dial the desired number, followed by pressing the TALK/CALL BACK button on
the headset.
To answer calls:
1. Remove the cordless phone from the base unit (if not out).
2. Press the TALK/CALL BACK button on the headset, and take the call.
To end calls, simply press the TALK/CALL BACK button or place the cordless phone into the base
unit for charging.
GN7170_userguide.ind 8
13/08/04 9:55:55
4.2 Redial
You may redial the previously-dialed number (maximum of 32 digits) by pressing the REDIAL button.
4. 3 CHARGE/IN USE indicator
The base unit’s CHARGE/IN USE indicator is lit when the handset is charging in the base unit, or
when the handset’s RINGER switch is set to the ON position.
The base unit’s CHARGE/IN USE indicator flashes during a phone call, or when the PAGE/FIND button is pressed.
4.4 Muting the microphone
To mute the microphone and temporarily stop the transmission of your voice,
slide the mute switch on the headset’s cord.
4.5 Clearing static interference: CHANNEL button
The CH/CHANNEL button can be pressed to get rid of static interference.
Press and release to proceed to a clear channel.
4.6 Temporary Tone Dialing
Note: This feature is only useful if you use pulse dialing service.
Talk
Mute
Temporary Tone Dialing lets pulse (rotary) service phone users temporarily
access touch-tone services offered by banks, supermarkets, etc. For example, when you call your
bank, you may need to enter your account number, or make a menu-selection on an automated
service.
To
1.
2.
3.
4.
use Temporary Tone Dialing, complete the following:
Remove the handset from the base unit (if not out).
Press the TALK/CALL BACK button on the handset.
Dial the telephone number.
When you call is answered by an automated service, press the *TONE/CANCEL button on the
handset to temporarily change from pulse to tone dialing.
5. Follow the automated instructions as required.
6. Press the TALK/CALL BACK button to hang up. The handset automatically returns to pulse (rotary)
dialing mode.
4.7 Canceling instruction: *TONE/CANCEL button
Press the *TONE/CANCEL button to cancel any command you initiated.
4.8 Locating misplaced handset
To locate a misplaced cordless phone, press the PAGE/FIND button on the base unit. The cordless
phone will beep continuously for 2 minutes, or until any other button on the cordless phone is
pressed. You may also press PAGE/FIND to cancel the cordless phone’s beeping.
Note: The RINGER switch does not have to be ON for this feature to work.
4.9 Ringer Switch
The handset RINGER switch must be ON for the cordless phone to ring during incoming calls.
GN7170_userguide.ind 9
13/08/04 9:56:03
4.10 Volume
To adjust the volume, ensure the RINGER switch is ON, and press the
four volume levels.
increases volume,
decreases volume.
buttons. There are
The volume LED is in the handset’s display, and the volume level is shown in the display.
• VOL 1 is the lowest volume level
• VOL 4 is the highest volume level.
4.11 Call Timer
The total talk time of a call is displayed on the bottom line of the handset display.
5. Caller ID (CID) features
Caller ID (CID) features include various caller identification and call
waiting functions. The storing, reviewing, transferring and
reformatting of CID information as well as making phone calls using
CID information is part of the overall Caller ID functionality.
Time
Date
New call
317-555-1234
FRED PAGE
Caller ID phone number
Caller ID name
Note: Caller ID is a local network operator service and may not be available in all locations. You
must subscribe to the operator’s service in order to use this feature.
The cordless phone will receive and display Caller ID information transmitted by your local network
operator service. This information may include the phone number, date and time; or the name,
phone number, date, and time. The handset stores up to 40 calls for later review.
The local network operator-provided CID information may also be transferred to the GN 7170’s
own memory. See the Transferring CID records to memory section.
5.1 Call Waiting Caller ID
Note: Call Waiting Caller ID is a local network operator service and may not be available in all locations. You must subscribe to the operator’s service in order to use this feature.
Provided you subscribe to Call Waiting Caller ID service from your local network operator, you may
see in the display who is your second caller while on a call.
• You will hear the call waiting beep when a second call comes in.
• The caller identification information appears in the display after you hear the dial tone.
To activate Caller Waiting ID, press the FLASH/PROGRAM button to put the first person on hold and
answer the second incoming call.
5.2 Receiving and Storing CID Records
Note: Check with your local network operator for name service availability.
When you receive a call, the information is transmitted by the network operator to your Caller ID
handset between the first and second ring.
When the GN 7170’s Caller ID memory is full (40 numbers), a new call record automatically replaces
the oldest call record in memory. Note the following display explanations:
• NEW appears in the display for calls received that have not been reviewed.
• REPT indicates that a new call from the same number was received more than once.
10
GN7170_userguide.ind 10
13/08/04 9:56:05
5.3 Reviewing CID Records
As calls are received and stored, the display is updated to let you know how many calls have been
received. Note the following functionality:
• Press the
button to scroll through the call records from the most recent to the oldest.
• Press the
button to scroll through the call records from the oldest to the newest.
6. Transferring CID records to memory
It is also possible to store received or reviewed CID information to your GN 7170’s own memory.
Stored information may then be reformatted or used to, for example, make calls.
Note: It is important that you format CID records correctly before storing in memory. It is not possible to re-format CID records stored in memory.
6.1 Transferring a CID record to your GN 7170’s memory
You may transfer a Caller ID record to your GN 7170’s memory by completing the following:
1. Use the
or
button to scroll to the desired record.
2. Press the MEM button.
3. Press the desired memory location.
• You will hear a confirmation tone.
For example, press the number 1 key to store the record in memory location 1.
6.2 Replacing a CID record’s memory location in you GN 7170’s memory
You may then replace a transferred CID record in a memory location with a new CID record.
Complete the following:
1. Repeat steps 1-3 as above.
2. Press the MEM button.
REPLACE MEMO? will be displayed in the display.
3. Press *TONE/CANCEL to exit, or press the MEM button again. The new CID record will now
replace the old CID record in that memory location.
• You will hear a confirmation tone.
6.3 Deleting the current CID record
To delete the current CID record, complete the following:
Make sure the GN 7170 is OFF (not in talk mode).
1. Use the
or
button to display the desired CID record.
2. Press CH/DELETE.
• The display will show DELETE?
3. Press *TONE/CANCEL to exit, or press the CH/DELETE button again to erase the record.
• You will hear a confirmation tone.
• The display shows DELETED.
• The next CID record will be shown in the display.
6.4 Deleting all CID records
To delete all CID records, complete the following:
1. Make sure the GN 7170 is OFF (not in talk mode)
2. Use the
or
button to display any CID record.
3. Press and hold CH/DELETE until the cordless phone beeps and DELETE ALL? Shows in the display.
4. Press *TONE/CANCEL to exit, or press the CH/DELETE button again to erase all records.
• You will hear a confirmation tone.
• The display shows NO CALLS.
11
GN7170_userguide.ind 11
13/08/04 9:56:06
6.5 Dialing a Caller ID number
To dial a number from your Caller ID records, complete the following:
1. Make sure the GN 7170 is OFF (not in talk mode)
2. Use the
or
button to display the desired CID record.
3. Press the TALK/CALL BACK button. The number dials automatically.
6.6 Changing the CID number format
The format button lets you change the format of the displayed CID number if, for example, the
number is not dialing correctly. The available formats are as follows:
• 7-digit: 7-digit phone number
• 10-digit: 3-digit area code + 10-digit phone number
• 11-digit: long distance code “1” + 3-digit area code + 10-digit phone number
To change the CID number format number from your Caller ID records, complete the following:
1. Use the
or
button to scroll to the number you want to call back.
2. If the number will not dial correctly, press the FORMAT button. If necessary, press the FORMAT
button again until the correct format of the desired number is displayed.
3. Press the TALK/CALL BACK button, the number will now dial automatically.
7. Memory function
The GN 7170 can store up to ten 24-digit numbers in its memory, which can be accessed for quick dialing. Additionally, the GN 7170 can also store up to 40 Caller ID records in its Caller ID memory log.
7.1 Storing a name and number in memory
To store a name and number in memory, complete the following:
1. Make sure the GN 7170 is OFF (not in talk mode)
2. Press the MEM button.
3. Press the desired memory location (0 through 9)
4. Press the MEM button again.
• The display shows ENTER NAME (maximum 15 characters)
Note: You may skip entering the name; proceed to step 6.
5. Use the number pad to enter the name.
For example, to enter the name Bill:
Press the number 2-key twice for the letter B.
Press the number 4-key three times for the letter i.
Press the number 5-key three times for the letter l.
Press the number 5-key three times for the letter l.
Note: If you enter the wrong letter, press CH/DELETE button to backspace.
6. Press the MEM button to save the name.
• The display shows ENTER TEL NUMBR.
7. Use the number pad to enter the number you want to store (maximum 24-digit number).
8. Press the MEM button again to store the number.
• You will hear a confirmation tone.
7.2 Changing a stored number
To change a stored number, complete the following:
1. Repeat steps 1-6 in the Storing a name and number in memory section.
2. Press the REDIAL button.
3. Press the MEM button again to store the number.
• You will hear a confirmation tone.
12
GN7170_userguide.ind 12
13/08/04 9:56:07
7.3 Storing a redial number
To store a redial number, complete the following:
1. Repeat steps 1-6 in the Storing a name and number in memory section.
2. Press the REDIAL button.
3. Press the MEM button again to store the number.
• You will hear a confirmation tone.
To replace an old redial number, complete the following:
1. Repeat steps 1-6 in the Storing a name and number in memory section.
2. Press the MEM button.
• REPLACE MEMO shows in the display.
3. Press *TONE/CANCEL to exit, or press the MEM button again to replace the old redial number
with a new redial number in that memory location.
• You will hear a confirmation tone.
7.4 Dialing a stored number
There are 2 ways to dial a stored number.
A) To dial a stored number:
1. Make sure the cordless phone is ON by pressing the TALK/CALL BACK button.
2. Press them MEM button.
3. Press the number (0 to 9) for the desired memory location.
• The number will dial automatically.
B)
1.
2.
3.
To dial a stored number:
Make sure the cordless phone is OFF (not in TALK mode).
Press the MEM button.
Use the
or
button to scroll through the stored numbers in memory until the desired
number is shown.
4. Press TALK/CALL BACK.
•The number will dial automatically.
7.5 Inserting a pause in the dialing sequence
You may insert a delay into the dialing sequence of a stored number. This is sometimes necessary
when a pause is needed to wait for a dial tone (for example, after you dial 9 to access an outside
line, or to wait for a computed access tone).
To insert a pause, press the # pause key twice within one second when storing a phone number.
The pause in the number will be shown with a P.
7.6 Reviewing and deleting numbers
You may review and/or delete stored number by completing the following:
1. Press the MEM button, then use the use the
or
button to scroll and view the
number.
2. While the desired entry is displayed, press the CH/DELETE button to delete the entry.
• The display shows DELETE?
3. Press *TONE/CANCEL to exit, or press the CH/DELETE button again to delete the entry.
• If the CH/DELETE button is pressed, DELETED will be shown on the display.
13
GN7170_userguide.ind 13
13/08/04 9:56:08
7.7 Chain dialing from the memory
Chain dialing from the memory is ideal for making calls that require a sequence of numbers to be
dialed, such as using a calling card to call a frequently-dialed long distance number.
Chain dialing from the memory works by storing the sequences of numbers in the GN 7170’s
memory locations (0 through 9). See the Storing a name and number in memory section for relevant instructions, and specifically step 3 (choosing the memory location).
For example, you might save the following sequences of numbers (your long distance carrier’s
access number, your calling card number and your authorization code) into the following memory
locations (0 through 9) of your GN 7170:
The number for...
Memory location (0 through 9)
Long distance carrier’s access number: 1 123 123 1234
Your calling card number: 123456789
Authorization code: 1234
To chain dial from the memory, complete the following (refer to the above table’s example):
1. Make sure the cordless phone is ON.
2. Press the MEM button, and then press 7.
• The 7 represents your long distance carrier’s access number.
3. When you hear the access tone, press the MEM button again, and then press 8.
• The 8 represents your calling card number.
4. When you hear the second access tone, press the MEM button again, and then press 9.
• The 9 represents your authorization code.
The complete sequence of numbers will now be dialed.
14
GN7170_userguide.ind 14
13/08/04 9:56:08
8. Display messages and sound signals
8.1 Display messages table
Display message
Meaning
INCOMPLETE DATA
Caller information has been interrupted during transmission or the
phone line is excessively noisy.
ENTER NAME
Prompt telling you to enter the name for one of the 10 memory locations.
ENTER TEL NUMBR
Prompt telling you to enter the telephone number for one of the 10
memory locations.
DELETE?
Prompt asking you if you want to erase Caller ID records or one of the
10 numbers stored in the GN 7170’s outbound memory.
DELETE ALL?
Prompt asking you if you want to erase all Caller ID records.
DELETED
Prompt confirming the Caller ID/Memory record is erased.
END OF LIST
Indicates that there is no additional information in the Caller ID.
NEW
Indicates call or calls have not been reviewed.
UNKNOWN NAME/
CALLER/NUMBER
The incoming call is from an area not services by Caller ID or the information was not sent.
PAGING
Someone has pressed the page button on the base.
BLOCKED CALL
The person’s name is blocked from transmission.
REPT
Repeat call message. Indicates that a new call from the same number
was received more than once.
NO DATA
No Caller ID information was received.
EMPTY
Indicates a memory location is vacant.
NO CALLS
Indicates no CID records have been stored.
MESSAGE WAITING
Indicates a message is available.
MESG WAITING OFF
Indicates a message is deactivated
PRESS TALK KEY
Prompt indicating the Caller ID number is a direct dial number (DDN)
that can not be formatted.
UNABLE TO DIAL
Indicates the Calling number is incomplete and can not be dialed out.
8.2 Sound signals table
Sound signal
Meaning
A long warbling tone (with ringer on).
Signals an incoming call.
Two long beeps.
Confirmation tone.
One short and one long beep.
Page signal.
One short beep every 7 seconds.
Low battery warning.
Three short beeps.
Error tone.
15
GN7170_userguide.ind 15
13/08/04 9:56:09
9. Frequently asked questions
Q. I’ve installed my GN 7170 and connected the power source, but the cordless phone’s
display is not working.
• Verify that you have connected the battery (inside the battery compartment) correctly. Connect
the battery cord into the receptor located inside the battery compartment.
• Ensure that the battery is fully charged.
Q. My Caller ID features don’t seem to work/the display is not working.
• Caller ID features are provided by your local telephone operator and may not necessarily be
available in all locations. You must subscribe to your telephone operator’s services to use this
feature.
• The Caller ID Error message is displayed the cordless phone detects anything other than valid
Caller ID information during the silent period after the first ring. The message indicates the presence of noise on the line.
• Ensure that the battery is fully charged.
Q. I’ve connected my phone, but there is no dial tone.
• Make sure the base power cord is connected to a working outlet.
• Make sure the telephone line cord is connected to the base unit and the wall jack.
• Ensure the headset is correctly plugged into the base, and that the handset’s RINGER switch is
ON.
• Make sure your cordless phone is within range of your base unit 150 feet/45 meters.
• Ensure the battery is fully charged (for 12 hours before initial use), and also verify that the battery is connected correctly inside the battery compartment.
• Ensure the headset is properly connected to the headset jack on the side of the cordless phone.
With the GN 7170, conversation across the phone can only occur through the headset.
Q. The dial tone is OK, but I still can’t dial out.
Make sure the tone/pulse setting is programmed correctly.
Q. I’m experiencing static/interference during my phone calls.
• The cordless phone may be out of range of the base, which is 150 feet/45 meters.
• You may need to relocate the base unit to another position to reduce interference. Other electrical devices, aluminum siding, heating ducts or metal constructions may case interference.
Atmospheric conditions such as storms may also cause temporary interference or poor reception.
• Ensure that the GN 7170’s base is connected to the telephone jack and power supply.
• Follow the instructions given in this guide to change the channel of your GN 7170 to a clearer
one.
• Another device is plugged into the same power supply source as the GN 7170 may cause static
and interference to your calls.
Q. My cordless phone beeps unusually before/during calls.
• Your security code may have to be reset. Place the cordless phone into the base for 20 seconds
and follow the given instructions to reset your security code.
• The charging contacts of your cordless phone and base unit may need cleaning. Use a dry, soft
cotton cloth to clean these charging contacts.
• The battery may need replacing. This is often the case if it occurs when you press the TALK/CALL
BACK button.
16
GN7170_userguide.ind 16
13/08/04 9:56:09
Q. What is the range of my GN 7170?
The GN 7170 has a range of up to 150 feet/45 meters in standard office environments. Factors
such as other electrical devices or office walls may compromise the GN 7170’s range.
Q. The CHARGE/IN USE indicator on the base unit is flashing.
Provided your local telephone operator offers voice messaging services and that you subscribe to
these, the CHARGER/IN USE indicator flashes (when not in use) to indicate that you have a message waiting. It stops flashing when the message has been reviewed.
Q. Can I use my GN 7170 headset with other telephones?
The GN 7170’s headset may be used with other 2.5 mm-ready cordless or mobile phones, however, the GN 7170’s headset and cordless phone have been optimized for use with each other to
give you the best performance.
10. Operational and safety information
10.1 Changing the battery
The GN 7170 comes with a user-replaceable battery.
Make sure the telephone is OFF before replacing the battery.
To replace the battery, complete the following steps:
1. Remove the battery compartment door.
2. Disconnect the battery plug from the jack in the cordless
phone, and remove the battery.
3. Insert the new battery pack and connect the cord into
the jack inside the cordless phone.
4. Replace the battery compartment door.
5. Place the cordless phone in the base to charge.
Caution: Use only a GN Netcom-recommended replacement battery. A correct OEM replacement,
rechargeable 3.6V, 600mAh Nickel-Metal Hydride battery pack consisting of 3 AAA cells wired in
series, can be purchased at most leading electronic retailers. The use of other batteries may result
in the risk of personal injury or fire.
For more information, please contact GN Netcom – Product Support at 1-800-826-4656.
Note: Allow the battery to fully charge for 12 hours prior to initial use or use after battery replacement. Battery performance will be compromised if the battery is not fully charged before use.
10.2 Battery precautions
• Do not burn, dissemble, mutilate or puncture. Like other batteries of this type, toxic materials
could be released which can cause injury.
• To reduce the risk of fire or personal injury, use only the GN Netcom-recommended replacement
battery (see Caution note above)
• Keep batteries out of the reach of children.
• Remove batteries if storing over 30 days.
10.3 General product care
To keep your GN 7170 working and looking look, follow these guidelines:
• Avoid putting the phone near heating appliances and devices that generate electrical noise (for
example, motors, fluorescent lamps).
17
GN7170_userguide.ind 17
13/08/04 9:56:10
•
•
•
•
Do NOT expose the base unit or cordless phone to direct sunlight or moisture.
Avoid dropping any parts and avoid other rough treatment of the GN 7170.
Clean with a soft cloth.
Never use a strong cleaning agent or abrasive powder because this will damage the finish of the
GN 7170’s parts.
• Retain the original packaging in case you need to ship the phone at a later date.
This telephone system meets FCC standards for hearing Aid Compatibility.
18
GN7170_userguide.ind 18
13/08/04 9:56:11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2004:09:04 10:09:59+08:00 Create Date : 2004:08:26 11:22:31Z Page Count : 30 About : uuid:f886ad3c-6d19-4023-ab8f-73693dbdb285 Producer : Acrobat Distiller 5.0.5 (Macintosh) Creation Date : 2004:08:26 11:22:31Z Mod Date : 2004:09:04 10:09:59+08:00 Author : Louise Metadata Date : 2004:09:04 10:09:59+08:00 Creator Tool : QuarkXPress(tm) 5.01 Document ID : uuid:2ab686b0-586f-4b90-8bcb-530a31eb9014 Format : application/pdf Creator : Louise Title : Warrenty_170x135EXIF Metadata provided by EXIF.tools