GN Audio USA GNELLIPSE24 GN Ellipse 2G4 Wireless Headset User Manual GNN ELLIPSEPRELIM qxp

Download:
Mirror Download [FCC.gov]
Document ID	180907
Application ID	hGyrda8x682h4tf+HkEZqw==
Document Description	users manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	46.11kB (576332 bits)
Date Submitted	2001-11-27 00:00:00
Date Available	2002-04-22 00:00:00
Creation Date	2001-09-11 08:21:55
Producing Software	Acrobat Distiller 4.05 for Macintosh
Document Lastmod	2001-09-20 11:55:34
Document Title	GNN ELLIPSEPRELIM.qxp
Document Creator	QuarkXPress(tm) 4.11
Document Author:	Macintosh

User Guide
Ellipse Components
Remote Backpack
Base
Base Stand
Headset Holder
Headset
(included with System purchase
or as an option)
* Charge battery for 3 hours prior to initial use.
Wireless Headset System*
AC Power Adapter
Telephone Cord
Remote Battery
Remote Handset Lifter
GN Ellipse 2.4
(included with System purchase
or as an option)
For More Information:
Pour Plus de Détails:
Para Más Información:
Para Obter Informações Adicionais:
www.gnnetcom.com
CORPORATE HEADQUARTERS
77 Northeastern Blvd.
Nashua, NH • 03062
1-800-826-4656
1-603-598-1100
Fax: 1-603-598-1122
© 2001 GN Netcom, Inc. • All rights reserved.
Preliminary • Printed in the U.S.A.
10
11
12
10
Pocket Clip
11
Belt Clip
12
Lanyard
1
Remote Beltpack Functions
Battery Information
Battery Type
Headset Mode Indicator:
Blinks when the system is in headset mode;
no light in handset mode.
Volume Control:
Press + to increase volume.
Press - to decrease volume.
Mute Button:
Press to activate Mute and disable the
transmit/microphone; press again to enable
transmit/microphone.
Capacity On-Line
Capacity Off-Line
Nickel Metal Hydride (NiMH), 3.6 V 500 mAH
(GN Netcom part number 27381101).
Fully charged battery provides minimum of 12 hours
continuous use without recharging.The base has two
charging ports; additional battery can be purchased for
24/7 operation.
Fully charged battery provides minimum 80 hours
without recharging.
Recharging Time
Maximum 3 hours to completely recharge a discharged
battery; battery cannot be overcharged.
Battery Life
2 years if battery is recharged when not in use
and never completely discharged.
Headset/Handset
& Remote Handset Lifter Buttons:
Press to enter headset or handset mode as
desired (lights on remote and base light in headset mode); press again to answer a call with the
Remote Handset Lifter (optional).
Base Functions/Indicators
Transmit Settings:
Telephone Compatibility Settings:
Adjusts the volume of your voice.
Fine tunes the system to your telephone system.
Battery Charge Indicator:
Lights when the remote is properly seated
in the base charger.
Headset Mode Indicator:
Lights when the system is in headset mode;
no light in handset mode.
Audio Indicators
Mute
Tone sounds in headset every 3 seconds.
Out of Range
Tone sounds in headset every 10 seconds.
Low Battery
Tone sounds in headset every 20 seconds.
Volume
Tone sounds in headset at maximum and minimum range.
Recharging the Battery
Slide the Remote into the Charger on either side of the base. To use your Headset while charging,
put the System in Headset Mode. To charge overnight, put the System in the Handset Mode.
Discharging the Battery
For optimum Battery life, completely discharge the Battery approximately every 6 months. The
Discharge/Recharge cycle takes approximately 2 hours. Removing the Remote from the Base during
discharge cancels the operation. Only one Battery can be placed in the Base while discharging.
A. Slide the Remote into the Charger on either side of the Base.
B. Simultaneously press the Mute and Headset/Handset buttons for 5 seconds. The Headset Mode and
Battery Charger Indicators will flash alternately during discharge. When fully discharged, the Battery
automatically recharges.
Setting Up
1. Connect all cords.
5. Connect the Headset
to the Remote.
8. Make sure the Mute is off.
When Mute is on, a tone sounds in the
Headset every 3 seconds.
6. Slide the Remote into the Charger
on either side of the Base. The
Battery Charge light on the side of
the Base illuminates. Charge the
Battery for a full 3 hours. Use the
Handset while the Battery charges.
9. Put the Headset on and select a
telephone compatibility setting
until dial tone is clear. If dial
tone is clear for both A and G,
set to A.
2. Attach the Base Stand.
10. Remove the Handset and
7. Put the System in Headset Mode.
3. Attach the Headset Holder.
The Headset Mode light on the
top of the Remote blinks, and the
Headset Mode light on the side of
the Base illuminates.
It will take up to 45 seconds to establish a
channel with first use.
make a call. While switching
between the Headset and
Handset, adjust the transmit
(microphone) setting until
your voice is the same volume
on both devices (1 is the softest,
8 is the loudest). Most settings
are 5-7. If the best setting is 7
or 8, change the telephone
compatibility setting to G.
Disconnect the optional Remote Handset
Lifter from the Base while setting the
volume.
4. Attach the Battery
to the Remote.
11. Use the Remote Beltpack to adjust
the receive (speaker) volume. If
your telephone has volume control,
set it to mid-range.
Using The Remote
FAQs
12. To roam up to 200 ft. (150 m)
from the base, remove the
Remote from the Base Charger
and clip it to your belt or pocket, or
wear it with the Lanyard.
Adjusting Remote Beltpack
Buzz Volume
Put the System in Handset Mode.
Simultaneously press the upper and
lower parts of the Volume Button
as well as the Mute Button.
The Headset Mode Indicator
light on the remote lights up
indicating you are in buzzer
setting mode. Press the Volume
Button (+ or -) to cycle through
the four available options:
Maximum Volume, Medium Volume
Minimum Volume, Buzzer Muted.
Release the Volume Button when
the desired setting is reached.
Within 5 seconds, the setting will
be stored and the Headset Mode
Indicator light will go out.
What should I check if I don’t hear a dial tone?
• Check to see that all cords and jacks are connected
• Make sure that the Headset cord is fully inserted into the remote
• Make sure that the AC Adapter is plugged in and has power
• Try the compatibility setting on A and G
• Make sure the system is in Headset Mode
• Make sure that the Battery is properly installed in the beltpack
• Make sure that the Battery is fully charged (3 hours minimum)
• Check that the serial numbers on the bottom of the Base unit and back of Beltpack
units match; because of the security circuits, the Beltpack and Base unit must match
for operation
What should I check if the other party has a hard time hearing me?
• Make sure the Mute on the Beltpack is off
• Increase the transmit level (1 is the softest, 8 is loudest)
• Check the position of the headset Microphone and make sure that it is placed at
the corner of your mouth
What should I do if I hear a buzz or humming sound in my Headset?
• Move the Base farther away from the telephone
What should I do if I hear an echo in my headset while speaking?
• Lower your transmit adjustment. If this makes the transmit too weak, try adjusting
the Telephone Compatibility Switch setting
What should I do if I hear noise or static or if the signal is weak?
• You may be out of range; move closer to the Base for a stronger signal
Do I need to lift the handset to make calls?
• Some telephone systems allow on-hook dialing; refer to your telephone system
user guide for instructions
13. Pocket Clip.
Accessories
14. Belt Clip.
15. Lanyard.
Battery
Remote Handset Lifter
Battery
Remote Handset Lifter
Battery
Remote Handset Lifter
Battery
Remote Handset Lifter
To prolong operating time from 12 to 24 hours, an additional Battery can be
purchased. (GN Netcom part number 27381101).
The Remote Handset Lifter lifts the Handset from your telephone
enabling you to answer and hang up calls without returning to your desk.
To prolong operating time from 12 to 24 hours, an additional Battery can be
purchased. (GN Netcom part number 27381101).
The Remote Handset Lifter lifts the Handset from your telephone
enabling you to answer and hang up calls without returning to your desk.
To prolong operating time from 12 to 24 hours, an additional Battery can be
purchased. (GN Netcom part number 27381101).
The Remote Handset Lifter lifts the Handset from your telephone
enabling you to answer and hang up calls without returning to your desk.
To prolong operating time from 12 to 24 hours, an additional Battery can be
purchased. (GN Netcom part number 27381101).
The Remote Handset Lifter lifts the Handset from your telephone
enabling you to answer and hang up calls without returning to your desk.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2001:09:11 08:21:55Z
Modify Date                     : 2001:09:20 11:55:34+02:00
Page Count                      : 4
Creation Date                   : 2001:09:11 08:21:55Z
Producer                        : Acrobat Distiller 4.05 for Macintosh
Author                          : Macintosh
Mod Date                        : 2001:09:11 08:44:46-04:00
Metadata Date                   : 2001:09:11 08:44:46-04:00
Creator                         : Macintosh
Title                           : GNN ELLIPSEPRELIM.qxp

EXIF Metadata provided by EXIF.tools