GN Audio USA H700 H700 BT Headset User Manual Manual

GN Netcom Inc H700 BT Headset Manual

Manual

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005.Motorola, Inc.Consumer Advocacy Office1307 East Algonquin RoadSchaumburg, IL 60196www.hellomoto.com1-877-MOTOBLU1-800-331-6456 (United States)1-888-390-6456 (TTY/TDD United States for hearing impaired)1-800-461-4575 (Canada)Guide Number: 6809495A68-OH700Bluetooth®Handsfree Headset21334Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions.TROUBLESHOOTINGMy phone doesn't find my headset.Make sure the indicator light on your headset is on (lit in blue) and steady when your phone is searching for devices (see step 3).My headset worked before but now it's not working.Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature was turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2) and pair your phone and headset again (see step 3).Support.If you need more help, contact us at1- 877-MOTOBLU.FOR DETAILS ABOUT YOUR HANDSFREE DEVICESee the user’s guide or visit us at www.hellomoto.com/bluetooth and click Support.For help, contact us at 1- 877-MOTOBLU or visit us at www.hellomoto.comTake a moment before you get started to familiarize yourself with your newH700 Headset.BEFORE YOU BEGINGet Connected in4 Quick Steps1 - CHARGE2 - START BLUETOOTH FEATURE3 - PAIR4 - TEST AND USE VolumeButtonsBoomMulti-ColorIndicator LightCall ButtonCHARGE Your Headset's BatteryPlug the Motorola charger into the end of the headset.The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on. When the headset's battery is fully charged (about 2 hours), the indicator light turns green.Disconnect the charger.12Note: Headset is not functional while charging.START BLUETOOTH FEATUREYour PhonePress (Menu) > Settings > Connection > Bluetooth Link > Setup.Scroll to Power.Select Change.Scroll to On.Press Select to turn on the Bluetooth feature. The Bluetooth feature remains on until you turn the feature off.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.12345Your phone's Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone.For most Motorola phones:M(PAIRYour HeadsetBefore you can use your headset, you must pair (link) it with your phone.Step A - PUT THE HEADSET IN PAIRING MODEEnsure the headset is turned off (indicator light not blinking and headset boom is closed). Press and hold the Call E button. After about 4 or 5 seconds, the indicator light becomes steadily lit in magenta. Release the Call E button and immediately open the headset boom. The indicator light remains steadily lit in magenta.If the indicator light is flashing in blue or not steadily lit when opening the headset boom, repeat steps 1 through 3 on this page.123PAIR CONTINUEDYour PhoneStep B - SET YOUR PHONE TO LOOK FOR YOUR HEADSET34512For most Motorola phones:On your Motorola phone, press (Menu) > Settings > Connection > Bluetooth Link > Handsfree > Look for Devices. The phone lists Bluetooth devices it finds.Select Motorola H700.Select OK or Yes to pair your headset with your phone.Enter the passkey: 0000Select OK.When your headset successfully pairs with your phone, the indicator light changes from steadily lit to flashing blue.Note: These steps are for most Motorola phones. For other phones, see your phone's user's guide.M(TEST AND USEYour phone and headset are now paired and ready to make and receive calls. To make a call: Open the headset boom and place the headset over your ear.On your phone, dial the number you want to call and press the SEND key.If your phone and headset are successfully paired, you will hear ringing on the headset.After you have successfully paired your phone and headset, you don't need to repeat these steps. For daily use, ensure that your headset is turned ON and that your phone's Bluetooth feature is ON.To save battery power, turn OFF the headset when you don't use it for an extended time.123MicrophoneSpeaker(on reverseside)USING YOUR H700SeeFeatures and Functions Guideon the reverse side for information onusing your H700.DRAFTDRAFT
IMPORTANT:Be sure to first follow the Quick Start Guide on the reverse side to complete initial setup of your H700.IMPORTANT:Be sure to first follow the Quick Start Guide on the reverse side to complete initial setup of your H700.H700Bluetooth®Handsfree HeadsetTURNING ON AND OFFTo turn your headset on, open the headset boom. The indicator light flashes blue.To turn your headset off, close the headset boom. The indicator light will turn off.To conserve battery power, turn off your headset when you don't plan to use it fora while.Multi-ColorIndicator LightWEARING THE HEADSETOpen the headset boom, then open the earhook (45° from the headset).Loop the earhook over your ear. Press the headset to your ear.Point the headset boom towards your mouth.1234CHANGING VOLUME BUTTON ORIENTATIONYou can also change the orientation of the volume buttons on your headset. Turn the headset power off.Press the Call E button until the indicator light becomes steadily lit in magenta, then press the Volume button you want to assign as the "volume up" button.12VolumeButtonsCall ButtonMAKING CALLSNote: Your H700 supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone's user's guide for more information.Function  ActionMake a voice dial call Tap the Call button   and speak the     name after the toneEnd a call  Tap the Call button    or close headset     boomReceive a call  Open headset boom    or tap the Call button    (if boom is already    open)Reject a call  Press and hold the Call button until you   hear a beepRedial last call  Press and hold theCall button until you   hear a beepMAKING CALLS CONTINUEDFunction  ActionAnswer a second Press and hold the incoming call  Call button (places   first call on hold)Toggle between two Press and holdactive calls  the Call buttonJoin a 3-way call  Press and hold(Note: Feature is phone/ both Volume buttonsnetwork dependent.)Put an active call on Press and hold thehold or resume a call Call button until youon hold   hear a beepTransfer a call from the Tap the Call buttonphone to the headsetDisable or enable the Press and holdindicator light  both Volume   buttons for 3 to 4    secondsMute or unmute a call Tap both Volume    buttonsINDICATOR LIGHTSWith the Charger Plugged In Indicator Light  Headset StatusRed (steady)  Charging (less the    80% charged)Yellow (steady)  Charging (more than    80% charged)Green (steady)  Charging completeWith No Charger Plugged InIndicator Light  Headset StatusOff   Power offMagenta (steady) Pairing modeRed   Battery lowBlue (10 rapid flashes) Pairing      successfulBlue (slow pulse)  Connected    (on a call)Blue (quick flash)  Standby (not on call)Note: After 5 minutes of inactivity, the light stops flashing to conserve power, but the headset remains in standby mode.AUDIO TONESThe audio tones provide information about your headset status.Audio Tone  Headset StatusSingle high tone when Volume at minimumpressing volume button or maximumFive rapid high tones Low batteryrepeated every 60 sec.No audio indications; Out of rangedeteriorating qualityRing tone  Incoming callSingle high tone  Pairing confirmationSingle low tone  Voice activationDual high/low tone Voice tag not   recognizedSingle high tone  End callLow to high tone  Phone network     not availableTwo ascending tones Mute enabledTwo descending tones Mute enabledCHANGING FOR USEON OTHER EAROpen the headset boom, then open the earhook (90° from the headset).Gently lift and pull thetop of the earhook upand off the upper hingepin. Then, pull it away to remove it.Flip the headset over.Hook the bottom of the earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.1234You can wear your H700 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear:1 Open Earhook2 Pull Earhook UpHinge PinDRAFTDRAFT

Navigation menu