GN Audio USA H700 H700 BT Headset User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	575508
Application ID	M32P6TKMwWaW9ppabMa1fw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	226.19kB (2827433 bits)
Date Submitted	2005-08-26 00:00:00
Date Available	2005-08-26 00:00:00
Creation Date	2005-06-30 20:50:18
Producing Software	Adobe PDF library 5.00
Document Lastmod	2005-06-30 15:52:17
Document Title	Manual
Document Creator	Adobe Illustrator 10.0

BEFORE YOU
BEGIN
CHARGE
Your Headset's Battery
START BLUETOOTH
FEATURE
PAIR
Your Headset
Your Phone
Your phone's Bluetooth feature is off by default.
To use your headset, you must turn on the
Bluetooth feature in your phone.
Before using this product, read the Important Safety and Legal
Information pamphlet and follow its instructions.
H700
Bluetooth®
Handsfree Headset
Take a moment before you get started to
familiarize yourself with your new
H700 Headset.
Multi-Color
Indicator Light
Get Connected in
4 Quick Steps
1 - CHARGE
2 - START
BLUETOOTH
FEATURE
3 - PAIR
4 - TEST AND
USE
Motorola, Inc.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
www.hellomoto.com
1-877-MOTOBLU
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for
hearing impaired)
1-800-461-4575 (Canada)
Guide Number: 6809495A68-O
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. The use of wireless devices and
their accessories may be prohibited or restricted in certain areas.
Always obey the laws and regulations on the use of these
products. The Bluetooth trademarks are owned by their
proprietor and used by Motorola, Inc. under license. All other
product or service names are the property of their respective
owners.
© Motorola, Inc. 2005.
Boom
Microphone
Volume
Buttons
Call
Button
Speaker
(on reverse
side)
For help, contact us at 1- 877-MOTOBLU
or visit us at www.hellomoto.com
For most Motorola phones:
(Menu ) > Settings > Connection >
1 Press M(
PAIR CONTINUED
Your Phone
Step B - SET YOUR PHONE TO LOOK FOR
YOUR HEADSET
For most Motorola phones:
(Menu ) >
1 On your Motorola phone, press M(
Settings > Connection > Bluetooth Link >
Handsfree > Look for Devices.
The phone lists Bluetooth devices it finds.
2 Select Motorola H700.
3 Select OK or Yes to pair your headset with
your phone.
4 Enter the passkey: 0000
5 Select OK.
When your headset successfully pairs with
your phone, the indicator light changes from
steadily lit to flashing blue.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
Plug the Motorola charger into the end of
the headset.
The indicator light turns red when the
battery is charging. It may take up to 1
minute for the indicator light to turn on.
When the headset's battery is fully charged
(about 2 hours), the indicator light turns
green.
2 Disconnect the charger.
Note: Headset is not functional while charging.
TEST AND USE
Your phone and headset are now paired
and ready to make and receive calls.
To make a call:
1 Open the headset boom and place the
headset over your ear.
2 On your phone, dial the number you want
to call and press the SEND key.
3 If your phone and headset are successfully
paired, you will hear ringing on the headset.
After you have successfully paired your
phone and headset, you don't need to
repeat these steps. For daily use, ensure
that your headset is turned ON and that
your phone's Bluetooth feature is ON.
To save battery power, turn OFF the
headset when you don't use it for an
extended time.
Bluetooth Link > Setup.
2 Scroll to Power.
3 Select Change.
4 Scroll to On.
5 Press Select to turn on the Bluetooth
feature. The Bluetooth feature remains on
until you turn the feature off.
Before you can use your headset, you must pair
(link) it with your phone.
Step A - PUT THE HEADSET IN PAIRING
MODE
1 Ensure the headset is turned off (indicator
light not blinking and headset boom is closed).
2 Press and hold the Call E button. After about
4 or 5 seconds, the indicator light becomes
steadily lit in magenta.
3 Release the Call E button and immediately
open the headset boom. The indicator light
remains steadily lit in magenta.
If the indicator light is flashing in blue or not
steadily lit when opening the headset boom,
repeat steps 1 through 3 on this page.
Note: These steps are for most Motorola phones. For other
phones, see your phone's user's guide.
USING YOUR H700
TROUBLESHOOTING
See
Features and
Functions Guide
on the reverse side
for information on
using your H700.
My phone doesn't find my headset.
Make sure the indicator light on your headset is
on (lit in blue) and steady when your phone is
searching for devices (see step 3).
My headset worked before but now it's not
working.
Make sure your phone is on and the Bluetooth
feature is turned on in your phone (see step 2).
If the Bluetooth feature was turned off or was
turned on only temporarily, you may need to
restart the Bluetooth feature (see step 2) and
pair your phone and headset again (see step 3).
Support.
If you need more help, contact us at
1- 877-MOTOBLU.
FOR DETAILS ABOUT YOUR HANDSFREE
DEVICE
See the user’s guide or visit us at
www.hellomoto.com/bluetooth and click
Support.
WEARING THE
HEADSET
TURNING ON AND OFF
CHANGING FOR USE
ON OTHER EAR
CHANGING VOLUME
BUTTON ORIENTATION
H700
Bluetooth®
Handsfree Headset
IMPORTANT:
Be sure to first follow the
Quick Start Guide
on the reverse side to
complete initial setup of
your H700.
To turn your headset on, open the
headset boom. The indicator light flashes
blue.
1 Open the headset boom, then open the
earhook (45° from the headset).
To turn your headset off, close the
headset boom. The indicator light will turn
off.
2 Loop the earhook over your ear.
To conserve battery power, turn off your
headset when you don't plan to use it for
a while.
Multi-Color
Indicator Light
4 Point the headset boom towards your
3 Press the headset to your ear.
mouth.
You can wear your H700 headset on your left or
right ear. The headset comes ready for the right
ear. To change the headset for the left ear:
1 Open the headset boom,
then open the earhook
(90° from the headset).
3 Flip the headset over.
1 Turn the headset power off.
2 Press the Call E button until the
2 Gently lift and pull the
top of the earhook up
and off the upper hinge
pin. Then, pull it away to
remove it.
You can also change the orientation of the
volume buttons on your headset.
1 Open Earhook
2 Pull Earhook Up
indicator light becomes steadily lit in
magenta, then press the Volume button
you want to assign as the "volume up"
button.
Call
Button
Volume
Buttons
4 Hook the bottom of the
earhook onto the lower
hinge pin, then lift and
pull the top of the
earhook over the upper
hinge pin.
MAKING CALLS
MAKING CALLS CONTINUED
Function
Action
Function
Action
Make a voice dial call
Tap the Call button
and speak the
name after the tone
Answer a second
incoming call
Press and hold the
Call button (places
first call on hold)
End a call
Tap the Call button
or close headset
boom
Toggle between two
active calls
Press and hold
the Call button
Receive a call
Open headset boom
or tap the Call button
(if boom is already
open)
Join a 3-way call
(Note: Feature is phone/
network dependent.)
Press and hold
both Volume buttons
Put an active call on
hold or resume a call
on hold
Press and hold the
Call button until you
hear a beep
Transfer a call from the
phone to the headset
Tap the Call button
Disable or enable the
indicator light
Press and hold
both Volume
buttons for 3 to 4
seconds
Mute or unmute a call
Tap both Volume
buttons
Reject a call
Redial last call
Press and hold the
Call button until you
hear a beep
Press and hold the
Call button until you
hear a beep
Note: Your H700 supports both Handsfree and Headset
Profiles. Accessing call functions depends upon which
profile your phone supports. See your phone's user's guide
for more information.
Hinge Pin
INDICATOR LIGHTS
With the Charger Plugged In
Indicator Light
Headset Status
Red (steady)
Charging (less the
80% charged)
Yellow (steady)
Charging (more than
80% charged)
Green (steady)
Charging complete
With No Charger Plugged In
Indicator Light
Off
Magenta (steady)
Red
Blue (10 rapid flashes)
Blue (slow pulse)
Blue (quick flash)
Headset Status
Power off
Pairing mode
Battery low
Pairing
successful
Connected
(on a call)
Standby (not on call)
Note: After 5 minutes of inactivity, the light stops flashing to
conserve power, but the headset remains in standby mode.
AUDIO TONES
The audio tones provide information about your
headset status.
Audio Tone
Single high tone when
pressing volume button
Five rapid high tones
repeated every 60 sec.
No audio indications;
deteriorating quality
Ring tone
Single high tone
Single low tone
Dual high/low tone
Single high tone
Low to high tone
Two ascending tones
Two descending tones
Headset Status
Volume at minimum
or maximum
Low battery
Out of range
Incoming call
Pairing confirmation
Voice activation
Voice tag not
recognized
End call
Phone network
not available
Mute enabled
Mute enabled

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 10.0
For                             : Rick Lazier, Harbor Light Communications, Inc.
Title                           : C:\Harbor Light Communications\Projects\MOT\Work Files\H700\QSG\Latest\9495A68o_Front.pdf
Create Date                     : 6/30/2005 3:50 PM
Bounding Box                    : -54 -649 1103 54
Creator Version                 : 10
Container Version               : 9
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:67c17c39-1af2-4f00-beca-3d99b79a7f76
Modify Date                     : 2005:06:30 15:52:17-05:00
Creator Tool                    : Adobe Illustrator 10.0
Metadata Date                   : 2005:06:30 15:52:17-05:00
Document ID                     : uuid:f7b0d991-2c77-4013-97ec-ee52b5dd569d
Format                          : application/pdf
Producer                        : Adobe PDF library 5.00

EXIF Metadata provided by EXIF.tools