GN Audio USA HHB600 HHB600 User Manual Bluetooth Headset en

GN Netcom Inc HHB600 Bluetooth Headset en

UserMan

right page (11) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, © Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmHeadset PTT Bluetooth™ (en) 11Headset PTT Bluetooth™ (en)Safety precautionsInformation for parentsPlease read the operating instructions and safety precautions carefully before use. Explain the content to your children and the hazards associated with using the Bluetooth™ Headset.Remember to comply with legal requirements and local restrictions when using the Bluetooth™ Headset. For example in aeroplanes, petrol sta-tions, hospitals or while driving.Mobile phones can inter-fere with the functioning of medical devices such as hearing aids or pacemak-ers. Maintain a minimum distance of 20 cm between the Bluetooth™ Headset and a pace-maker. When using the Bluetooth™ Headset hold it to the ear which is fur-ther away from the pace-maker. For more informa-tion consult your doctor.The earpiece can be removed. Caution! Small parts like this could be swallowed by young chil-dren.The main voltage (V) specified on the power supply unit must not be exceeded. Otherwise the charging device may be destroyed.Do not throw the device onto an open fire.Only use original Siemens charging devices and bat-teries (100 % mercury-free). Otherwise you risk serious damage to health and property. The battery could explode, for instance.The Bluetooth™ Headset must not be opened. Only changing the battery (100 % mercury-free) is permissible. You must not open the battery under any circumstances. Any other changes to this device are strictly prohib-ited and will invalidate the operating licence.
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmleft page (12) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, Headset PTT Bluetooth™ (en)12Important:Dispose of used batteries and Bluetooth™ Headsets according to the legal reg-ulations.The Bluetooth™ Headset can interfere with the operation of nearby TVs, radios or PCs.Use only Siemens original accessories. In this way you will avoid possible health risks and damage to the product and ensure compliance with all rele-vant provisions.Improper use will invalidate the guar-antee!NoteIn some countries there may be restrictions on the use of Bluetooth™ devices. Please check with the rele-vant authorities.
right page (13) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, © Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmHeadset PTT Bluetooth™ (en) 13Headset overviewPTT key(Push-To-Talk key)Press briefly: to activate voice dialling or to accept a call.Hold down:to end a call.Mute keySwitches the microphone to muteVolume rocker switchÒ key. Press for: louderÓ key. Press for: quieterEar hookCharging socketLoudspeaker with earpieceLEDIndicates different states of the headset (p. 14)On/Off switchMicrophoneCharging socket
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmleft page (14) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, Headset PTT Bluetooth™ (en)14Meaning of the LED displayThe light emitting diode (LED) indicates the different states of the headset:Adjusting the headsetTo ensure your Bluetooth™ headset rests comfortably on your ear, you can reposition the ear hook so the headset can be worn on either ear. 1. Pull the ear hook off back-wards.2. Turn the ear hook and care-fully push it back into posi-tion:• for the right ear:• for the left ear:NoteThe colour of the LED depends on the charge status. When it is:• RED the battery is empty, and• GREEN there is sufficient battery power.Steady GREEN Indicates end of charg-ing process.Steady RED Battery charging.FlashesRED x3 Battery empty.Constant illumination During registration.Flashes x5 Registration com-pleted successfully.Flashes x5 The headset has been reset to the default set-tings.Flashes slowly The headset is ready for operationFlashes rapidly • Incoming call or• During a callOff Headset switched off.
right page (15) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, © Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmHeadset PTT Bluetooth™ (en) 15Wearing the headset correctlyWear the Bluetooth™ headset as shown in the diagram. The microphone should always point towards your mouth.What is Bluetooth?Bluetooth™ is a short-range radio connection. It enables wireless communication between various terminals equipped with Bluetooth™.The Bluetooth™ headset will only work in conjunction with a Bluetooth™-enabled mobile phone capable of supporting the headset profile, such as the Sie-mens S65 or the XX. The hands-free profile is preferred. Please read the notes on Bluetooth™ connections in the user guide for your mobile phone as the con-trols and display messages differ between phones.Every Bluetooth™ device has a unique address and name. This ensures that it communicates with the right partner. The secu-rity concept is based on a pass-word that the two devices exchange when they first regis-ter (p. 16).Getting startedBefore you can use the Blue-tooth™ headset you need to:• charge the headset, and• register the headset with the mobile phone.Charging the Bluetooth headsetAs supplied, the battery is not yet fully charged.To charge the headset you will need the charging device included in the scope of delivery. If an ECA-500* charging adapter is used the headset can also be charged with a Siemens Traveler Charger ETC-500/510* or Sie-mens Car Charger Plus ECC-600*.* These products are available from the range of original Sie-mens accessories.
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmleft page (16) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, Headset PTT Bluetooth™ (en)16.1. Insert the charging device connector o into the headset n as shown.2. Insert the mains plug on the charging device into the mains socket. Charging timeAn empty battery is fully charged after about 2.5 hours.Display while chargingThe headset switches off auto-matically when it is connected to a charging device. The LED is red during charging. When the bat-tery is fully charged the LED turns green.Registering the headset with a mobile phoneThe headset must be switched on.1. Hold down the mute key and the Ò key simultaneously for at least 3 seconds. The LED will come on. Your mobile phone can now "search" for the Bluetooth™ headset.2. Activate search mode on your mobile phone. To do this please read the notes in the user guide for your mobile phone.3. When the mobile phone finds your headset this will be shown on the mobile phone display with the device nameHHB-600.4. If requested, enter the pass-word (PIN) for the headset into your mobile phone:0000.The Bluetooth™ headset is now registered with the mobile phone. Only charge the battery when the tem-perature is between 0 °C and 45 °C. Otherwise it will wear out prematurely.noIf your mobile phone cannot find the headset within 3 minutes you will need to reactivate search mode (repeat step 1).
right page (17) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, © Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmHeadset PTT Bluetooth™ (en) 17Switching the Bluetooth headset on and offPush the On/Off switch to the ON position (I). The headset is switched on. The LED flashes. To switch off, push the On/Off switch to the off position (0).ResettingTo register the Bluetooth™ headset with another mobile phone you must reset the head-set to the default settings:1. Switch the headset on (see above).2. Then press the PTT key and the key on the headset simultaneously for at least 3 seconds. The LED will flash rapidly five times.The headset has now been reset to the original default settings. You can now register the head-set with another mobile phone (p. 16).CallingTo use the headset to make a call, the headset must be switched on (see left) and a con-nection must be established with a mobile phone (p. 16).The procedures described below only apply to Siemens mobile phones. Different procedures may be required for mobile phones made by other manufac-turers.The following symbols are used to explain operation:LFunction depends on the service provider; special registration may be neces-sary.• You will know that a call is about to be interrupted if the signal quality is poor.• If the mobile phone is not con-nected to the network you will hear a repeated high-pitched tone in your headset.• If the Bluetooth™ connection to the mobile phone is interrupted for sev-eral seconds during a call, you can only continue the call from the mobile phone.
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmleft page (18) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, Headset PTT Bluetooth™ (en)18Voice diallingYou can only dial numbers by voice command. A voice record-ing of the name must be stored with the phone number in the mobile phone address book. Please read the mobile phone user guide.This function is not supported by all mobile phones.1. Press the PTT key briefly.2. Say the name.If the name is recognised the mobile phone will dial the rel-evant phone number.If the name is not recognised, press the PTT key again to redial.Dialling using the mobile phone1. Dial as normal using the mobile phone.2. Press the PTT key briefly to continue the call using the headset.Ending a callHold down the PTT key. The call is ended. The headset remains ready for operation.Setting the volumeUse the rocker switch to set the volume.The volume setting on the head-set does not affect the settings on the mobile phone.Accepting a callPress the PTT key briefly.Holding a callPress the PTT key briefly. To con-tinue the call press the PTT key again.
right page (19) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, © Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmHeadset PTT Bluetooth™ (en) 19Call waiting/swapping between callsCall waitingDuring a call, you may be advised that there is another call waiting. You will hear a special tone during the call.To accept the new call, press the PTT key. The existing call is put on hold.You have the following options:SwappingTo swap between the two calls, press the PTT key briefly.Rejecting the current callHold down the PTT key. The active call is ended. The second call is put on hold. Press the PTT key briefly to resume this call.Picking up a callFrom the phone to the headsetPress the PTT key briefly.From the headset to the phoneUse the control keys on the mobile phone. Please read the phone’s user guide.Muting the microphoneYou can mute the microphone during a call. The recipient can no longer hear you. To do this, press the mute key.Device information/caring for your head-setMaintenance advice• Clean the headset with a damp cloth or an anti-static cloth. Do not use chemical cleaning agents.• Protect the headset against moisture and knocks. Do not expose your headset to direct sunlight.L
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmleft page (20) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, Headset PTT Bluetooth™ (en)20Declaration of conformityFCC:This device conforms with Part 15 of the FCC rules. Precondi-tions for operating the device: (1) the device causes no harmful interference, and (2) is not affected by any form of interfer-ence, including interference that can have undesirable effects.Canada: Licence No. IC xxxxxx
right page (21) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003, © Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fmHeadset PTT Bluetooth™ (en) 21Technical data* Depending on the mobile phone usedCustomer serviceYou will be given personal advice about our range of products on our Premium Hotline:Germany 0190 - 74 58 26(1.24 euros/minute)Austria 0900 - 30 08 08(1.35 euros/minute)Qualified Siemens employees are wait-ing to offer you expert information about our products and installation.Should repairs become necessary please contact one of our service cen-tres (S. 123). Li-ion bat-teryXXX mAh Charging timeapprox. 2.5 hoursStandby timeup to 150 hoursTalk time up to 4 hours*Range max. 10 metres, less in buildingsWeight approx. 25 gramType of pro-tectionIP20We offer fast, individual advice! You have several options:Our online support on the Internet:www.my-siemens.com/customercare We can be reached any time, any place. You are given 24 hour support on all aspects of our products. Here you will find an interactive fault-find-ing system, a compilation of the most frequently asked questions and answers, plus user guides and cur-rent software updates to download.NoteWhen calling customer service, please have ready your receipt, the headset identity number and the phone identity number (IMEI, to dis-play press *#06#), the phone’s soft-ware version (to display press *#06#, then§Info§) and if necessary your Sie-mens Service customer number.

Navigation menu