GN Audio USA HHB600 HHB600 User Manual Bluetooth Headset en

Download:
Mirror Download [FCC.gov]
Document ID	399547
Application ID	AYhp6KfiIeRTTXpx/35KFA==
Document Description	UserMan
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	21.54kB (269227 bits)
Date Submitted	2004-02-27 00:00:00
Date Available	2004-02-26 00:00:00
Creation Date	2003-12-18 12:34:01
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-12-18 12:34:01
Document Title	Bluetooth_Headset_en.fm
Document Creator	PScript5.dll Version 5.2
Document Author:	mchkg407

right page (11) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
Headset PTT Bluetooth™ (en)
Safety precautions
Headset PTT
Bluetooth™
Information for parents
(en)
Please read the operating instructions
and safety precautions carefully
before use.
Explain the content to your children
and the hazards associated with using
the Bluetooth™ Headset.
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
Remember to comply with
legal requirements and
local restrictions when
using the Bluetooth™
Headset. For example in
aeroplanes, petrol stations, hospitals or while
driving.
Mobile phones can interfere with the functioning of
medical devices such as
hearing aids or pacemakers. Maintain a minimum
distance of 20 cm
between the Bluetooth™
Headset and a pacemaker. When using the
Bluetooth™ Headset hold
it to the ear which is further away from the pacemaker. For more information consult your doctor.
The earpiece can be
removed. Caution! Small
parts like this could be
swallowed by young children.
11
The main voltage (V)
specified on the power
supply unit must not be
exceeded. Otherwise the
charging device may be
destroyed.
Do not throw the device
onto an open fire.
Only use original Siemens
charging devices and batteries (100 % mercuryfree). Otherwise you risk
serious damage to health
and property. The battery
could explode, for
instance.
The Bluetooth™ Headset
must not be opened. Only
changing the battery
(100 % mercury-free) is
permissible. You must not
open the battery under
any circumstances. Any
other changes to this
device are strictly prohibited and will invalidate the
operating licence.
left page (12) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
12
Headset PTT Bluetooth™ (en)
Important:
Dispose of used batteries
and Bluetooth™ Headsets
according to the legal regulations.
The Bluetooth™ Headset
can interfere with the
operation of nearby TVs,
radios or PCs.
Improper use will invalidate the guarantee!
Note
In some countries there may be
restrictions on the use of Bluetooth™
devices. Please check with the relevant authorities.
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
Use only Siemens original
accessories. In this way
you will avoid possible
health risks and damage
to the product and ensure
compliance with all relevant provisions.
right page (13) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
Headset PTT Bluetooth™ (en)
13
Headset overview
PTT key
(Push-To-Talk key)
Press briefly:
to activate voice dialling or to
accept a call.
Hold down:
to end a call.
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
Mute key
Switches the microphone to
mute
Volume rocker switch
Ò key. Press for: louder
Ó key. Press for: quieter
Ear hook
Charging socket
Loudspeaker with earpiece
LED
Indicates different states
of the headset (p. 14)
On/Off switch
Microphone
Charging
socket
left page (14) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
14
Headset PTT Bluetooth™ (en)
Meaning of the LED display
Adjusting the headset
The light emitting diode (LED)
indicates the different states of
the headset:
To ensure your Bluetooth™
headset rests comfortably on
your ear, you can reposition the
ear hook so the headset can be
worn on either ear.
Note
The colour of the LED depends on the
charge status. When it is:
• RED the battery is empty, and
• GREEN there is sufficient battery
power.
Steady
GREEN
Indicates end of charging process.
1. Pull the ear hook off backwards.
2. Turn the ear hook and carefully push it back into position:
• for the right ear:
Steady RED Battery charging.
Battery empty.
Constant
During registration.
illumination
Flashes x5
Registration completed successfully.
Flashes x5
The headset has been
reset to the default settings.
Flashes
slowly
The headset is ready
for operation
Flashes
rapidly
• Incoming call or
• During a call
Off
Headset switched off.
• for the left ear:
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
Flashes
RED x3
right page (15) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
Headset PTT Bluetooth™ (en)
Wearing the headset
correctly
Wear the Bluetooth™ headset as
shown in the diagram. The
microphone should always point
towards your mouth.
15
Every Bluetooth™ device has a
unique address and name. This
ensures that it communicates
with the right partner. The security concept is based on a password that the two devices
exchange when they first register (p. 16).
Getting started
Before you can use the Bluetooth™ headset you need to:
• charge the headset, and
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
• register the headset with the
mobile phone.
Charging the Bluetooth
headset
What is Bluetooth?
As supplied, the battery is not
yet fully charged.
Bluetooth™ is a short-range
radio connection. It enables
wireless communication
between various terminals
equipped with Bluetooth™.
To charge the headset you will
need the charging device
included in the scope of delivery.
The Bluetooth™ headset will
only work in conjunction with a
Bluetooth™-enabled mobile
phone capable of supporting the
headset profile, such as the Siemens S65 or the XX. The handsfree profile is preferred. Please
read the notes on Bluetooth™
connections in the user guide for
your mobile phone as the controls and display messages differ
between phones.
If an ECA-500* charging adapter
is used the headset can also be
charged with a Siemens Traveler
Charger ETC-500/510* or Siemens Car Charger Plus ECC600*.
* These products are available
from the range of original Siemens accessories.
left page (16) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
Headset PTT Bluetooth™ (en)
Registering the headset with
a mobile phone
1. Insert the charging device
connector o into the
headset n as shown.
2. Insert the mains plug on the
charging device into the
mains socket.
Charging time
An empty battery is fully
charged after about 2.5 hours.
Display while charging
The headset switches off automatically when it is connected to
a charging device. The LED is red
during charging. When the battery is fully charged the LED
turns green.
Only charge the battery when the temperature is between 0 °C and 45 °C.
Otherwise it will wear out prematurely.
The headset must be switched
on.
1. Hold down the mute key and
the Ò key simultaneously for
at least 3 seconds. The LED
will come on. Your mobile
phone can now "search" for
the Bluetooth™ headset.
2. Activate search mode on your
mobile phone. To do this
please read the notes in the
user guide for your mobile
phone.
3. When the mobile phone finds
your headset this will be
shown on the mobile phone
display with the device name
HHB-600.
If your mobile phone cannot find the
headset within 3 minutes you will need
to reactivate search mode (repeat
step 1).
4. If requested, enter the password (PIN) for the headset
into your mobile phone:
0000.
The Bluetooth™ headset is now
registered with the mobile
phone.
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
16
right page (17) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
Headset PTT Bluetooth™ (en)
Switching the Bluetooth
headset on and off
Push the On/Off switch to the
ON position (I). The headset is
switched on. The LED flashes.
To switch off, push the On/Off
switch to the off position (0).
Resetting
To register the Bluetooth™
headset with another mobile
phone you must reset the headset to the default settings:
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
1. Switch the headset on (see
above).
2. Then press the PTT key and
the key on the headset
simultaneously for at least
3 seconds. The LED will flash
rapidly five times.
The headset has now been reset
to the original default settings.
You can now register the headset with another mobile phone
(p. 16).
17
Calling
To use the headset to make a
call, the headset must be
switched on (see left) and a connection must be established
with a mobile phone (p. 16).
The procedures described below
only apply to Siemens mobile
phones. Different procedures
may be required for mobile
phones made by other manufacturers.
The following symbols are used
to explain operation:
depends on the
L Function
service provider; special
registration may be necessary.
• You will know that a call is about to
be interrupted if the signal quality is
poor.
• If the mobile phone is not connected to the network you will hear
a repeated high-pitched tone in
your headset.
• If the Bluetooth™ connection to the
mobile phone is interrupted for several seconds during a call, you can
only continue the call from the
mobile phone.
left page (18) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
Headset PTT Bluetooth™ (en)
Voice dialling
You can only dial numbers by
voice command. A voice recording of the name must be stored
with the phone number in the
mobile phone address book.
Please read the mobile phone
user guide.
This function is not supported by
all mobile phones.
1. Press the PTT key briefly.
2. Say the name.
If the name is recognised the
mobile phone will dial the relevant phone number.
If the name is not recognised,
press the PTT key again to
redial.
Dialling using the mobile
phone
1. Dial as normal using the
mobile phone.
2. Press the PTT key briefly to
continue the call using the
headset.
Ending a call
Hold down the PTT key. The call is
ended. The headset remains
ready for operation.
Setting the volume
Use the rocker switch to set the
volume.
The volume setting on the headset does not affect the settings
on the mobile phone.
Accepting a call
Press the PTT key briefly.
Holding a call
Press the PTT key briefly. To continue the call press the PTT key
again.
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
18
right page (19) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
Headset PTT Bluetooth™ (en)
Call waiting/swapping
between calls
Call waiting
During a call, you may be
advised that there is another call
waiting. You will hear a special
tone during the call.
To accept the new call, press the
PTT key. The existing call is put
on hold.
You have the following options:
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
Swapping
To swap between the two calls,
press the PTT key briefly.
Rejecting the current call
Hold down the PTT key. The active
call is ended.
The second call is put on hold.
Press the PTT key briefly to
resume this call.
19
Picking up a call
From the phone to the headset
Press the PTT key briefly.
From the headset to the phone
Use the control keys on the
mobile phone. Please read the
phone’s user guide.
Muting the microphone
You can mute the microphone
during a call. The recipient can
no longer hear you. To do this,
press the mute key.
Device information/
caring for your headset
Maintenance advice
• Clean the headset with a
damp cloth or an anti-static
cloth. Do not use chemical
cleaning agents.
• Protect the headset against
moisture and knocks. Do not
expose your headset to direct
sunlight.
left page (20) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
20
Headset PTT Bluetooth™ (en)
Declaration of conformity
Canada: Licence No. IC xxxxxx
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
FCC:
This device conforms with Part
15 of the FCC rules. Preconditions for operating the device:
(1) the device causes no harmful
interference, and (2) is not
affected by any form of interference, including interference that
can have undesirable effects.
right page (21) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,
Headset PTT Bluetooth™ (en)
Technical data
Li-ion bat- XXX mAh
tery
Charging
time
approx. 2.5 hours
Standby
time
up to 150 hours
Talk time
up to 4 hours*
Range
max. 10 metres,
less in buildings
Weight
approx. 25 gram
© Siemens AG 2001, L:\Mobil\Bluetooth-Headset\en\Bluetooth_Headset_en.fm
Type of pro- IP20
tection
* Depending on the mobile
phone used
21
Customer service
We offer fast, individual advice! You
have several options:
Our online support on the Internet:
www.my-siemens.com/
customercare
We can be reached any time, any
place. You are given 24 hour support
on all aspects of our products. Here
you will find an interactive fault-finding system, a compilation of the most
frequently asked questions and
answers, plus user guides and current software updates to download.
You will be given personal advice about
our range of products on our Premium
Hotline:
Germany 0190 - 74 58 26
(1.24 euros/minute)
Austria 0900 - 30 08 08
(1.35 euros/minute)
Qualified Siemens employees are waiting to offer you expert information about
our products and installation.
Should repairs become necessary
please contact one of our service centres (S. 123).
Note
When calling customer service,
please have ready your receipt, the
headset identity number and the
phone identity number (IMEI, to display press #06#), the phone’s software version (to display press #06#,
then§Info§) and if necessary your Siemens Service customer number.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:12:18 12:34:01+01:00
Modify Date                     : 2003:12:18 12:34:01+01:00
Page Count                      : 11
Creation Date                   : 2003:12:18 11:34:01Z
Mod Date                        : 2003:12:18 11:34:01Z
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : mchkg407
Metadata Date                   : 2003:12:18 11:34:01Z
Creator                         : mchkg407
Title                           : Bluetooth_Headset_en.fm

EXIF Metadata provided by EXIF.tools