GN Audio USA HHB600 HHB600 User Manual Bluetooth Headset en

GN Netcom Inc HHB600 Bluetooth Headset en

UserManual.wiki >

GN Audio USA >

HHB600 User Manual >

UserMan HTML Version

UserMan

right page (11) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en) 11

Headset PTT

Bluetooth™

(en)

Safety precautions

Information for parents

Please read the operating instructions

and safety precautions carefully

before use.

Explain the content to your children

and the hazards associated with using

the Bluetooth™ Headset.

Remember to comply with

legal requirements and

local restrictions when

using the Bluetooth™

Headset. For example in

aeroplanes, petrol sta-

tions, hospitals or while

driving.

Mobile phones can inter-

fere with the functioning of

medical devices such as

hearing aids or pacemak-

ers. Maintain a minimum

distance of 20 cm

between the Bluetooth™

Headset and a pace-

maker. When using the

Bluetooth™ Headset hold

it to the ear which is fur-

ther away from the pace-

maker. For more informa-

tion consult your doctor.

The earpiece can be

removed. Caution! Small

parts like this could be

swallowed by young chil-

dren.

The main voltage (V)

specified on the power

supply unit must not be

exceeded. Otherwise the

charging device may be

destroyed.

Do not throw the device

onto an open fire.

Only use original Siemens

charging devices and bat-

teries (100 % mercury-

free). Otherwise you risk

serious damage to health

and property. The battery

could explode, for

instance.

The Bluetooth™ Headset

must not be opened. Only

changing the battery

(100 % mercury-free) is

permissible. You must not

open the battery under

any circumstances. Any

other changes to this

device are strictly prohib-

ited and will invalidate the

operating licence.

left page (12) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en)

Important:

Dispose of used batteries

and Bluetooth™ Headsets

according to the legal reg-

ulations.

The Bluetooth™ Headset

can interfere with the

operation of nearby TVs,

radios or PCs.

Use only Siemens original

accessories. In this way

you will avoid possible

health risks and damage

to the product and ensure

compliance with all rele-

vant provisions.

Improper use will invalidate the guar-

antee!

Note

In some countries there may be

restrictions on the use of Bluetooth™

devices. Please check with the rele-

vant authorities.

right page (13) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en) 13

Headset overview

PTT key

(Push-To-Talk key)

Press briefly:

to activate voice dialling or to

accept a call.

Hold down:

to end a call.

Mute key

Switches the microphone to

mute

Volume rocker switch

Ò key. Press for: louder

Ó key. Press for: quieter

Ear hook

Charging socket

Loudspeaker with earpiece

LED

Indicates different states

of the headset (p. 14)

On/Off switch

Microphone

Charging

socket

left page (14) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en)

Meaning of the LED display

The light emitting diode (LED)

indicates the different states of

the headset:

Adjusting the headset

To ensure your Bluetooth™

headset rests comfortably on

your ear, you can reposition the

ear hook so the headset can be

worn on either ear.

1. Pull the ear hook off back-

wards.

2. Turn the ear hook and care-

fully push it back into posi-

tion:

• for the right ear:

• for the left ear:

Note

The colour of the LED depends on the

charge status. When it is:

• RED the battery is empty, and

• GREEN there is sufficient battery

power.

Steady

GREEN Indicates end of charg-

ing process.

Steady RED Battery charging.

Flashes

RED x3 Battery empty.

Constant

illumination During registration.

Flashes x5 Registration com-

pleted successfully.

Flashes x5 The headset has been

reset to the default set-

tings.

Flashes

slowly The headset is ready

for operation

Flashes

rapidly • Incoming call or

• During a call

Off Headset switched off.

right page (15) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en) 15

Wearing the headset

correctly

Wear the Bluetooth™ headset as

shown in the diagram. The

microphone should always point

towards your mouth.

What is Bluetooth?

Bluetooth™ is a short-range

radio connection. It enables

wireless communication

between various terminals

equipped with Bluetooth™.

The Bluetooth™ headset will

only work in conjunction with a

Bluetooth™-enabled mobile

phone capable of supporting the

headset profile, such as the Sie-

mens S65 or the XX. The hands-

free profile is preferred. Please

read the notes on Bluetooth™

connections in the user guide for

your mobile phone as the con-

trols and display messages differ

between phones.

Every Bluetooth™ device has a

unique address and name. This

ensures that it communicates

with the right partner. The secu-

rity concept is based on a pass-

word that the two devices

exchange when they first regis-

ter (p. 16).

Getting started

Before you can use the Blue-

tooth™ headset you need to:

• charge the headset, and

• register the headset with the

mobile phone.

Charging the Bluetooth

headset

As supplied, the battery is not

yet fully charged.

To charge the headset you will

need the charging device

included in the scope of delivery.

If an ECA-500* charging adapter

is used the headset can also be

charged with a Siemens Traveler

Charger ETC-500/510* or Sie-

mens Car Charger Plus ECC-

600*.

* These products are available

from the range of original Sie-

mens accessories.

left page (16) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en)

1. Insert the charging device

connector o into the

headset n as shown.

2. Insert the mains plug on the

charging device into the

mains socket.

Charging time

An empty battery is fully

charged after about 2.5 hours.

Display while charging

The headset switches off auto-

matically when it is connected to

a charging device. The LED is red

during charging. When the bat-

tery is fully charged the LED

turns green.

Registering the headset with

a mobile phone

The headset must be switched

on.

1. Hold down the mute key and

the Ò key simultaneously for

at least 3 seconds. The LED

will come on. Your mobile

phone can now "search" for

the Bluetooth™ headset.

2. Activate search mode on your

mobile phone. To do this

please read the notes in the

user guide for your mobile

phone.

3. When the mobile phone finds

your headset this will be

shown on the mobile phone

display with the device name

HHB-600.

4. If requested, enter the pass-

word (PIN) for the headset

into your mobile phone:

0000.

The Bluetooth™ headset is now

registered with the mobile

phone.

Only charge the battery when the tem-

perature is between 0 °C and 45 °C.

Otherwise it will wear out prematurely.

If your mobile phone cannot find the

headset within 3 minutes you will need

to reactivate search mode (repeat

step 1).

right page (17) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en) 17

Switching the Bluetooth

headset on and off

Push the On/Off switch to the

ON position (I). The headset is

switched on. The LED flashes.

To switch off, push the On/Off

switch to the off position (0).

Resetting

To register the Bluetooth™

headset with another mobile

phone you must reset the head-

set to the default settings:

1. Switch the headset on (see

above).

2. Then press the PTT key and

the key on the headset

simultaneously for at least

3 seconds. The LED will flash

rapidly five times.

The headset has now been reset

to the original default settings.

You can now register the head-

set with another mobile phone

(p. 16).

Calling

To use the headset to make a

call, the headset must be

switched on (see left) and a con-

nection must be established

with a mobile phone (p. 16).

The procedures described below

only apply to Siemens mobile

phones. Different procedures

may be required for mobile

phones made by other manufac-

turers.

The following symbols are used

to explain operation:

LFunction depends on the

service provider; special

registration may be neces-

sary.

• You will know that a call is about to

be interrupted if the signal quality is

poor.

• If the mobile phone is not con-

nected to the network you will hear

a repeated high-pitched tone in

your headset.

• If the Bluetooth™ connection to the

mobile phone is interrupted for sev-

eral seconds during a call, you can

only continue the call from the

mobile phone.

left page (18) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en)

Voice dialling

You can only dial numbers by

voice command. A voice record-

ing of the name must be stored

with the phone number in the

mobile phone address book.

Please read the mobile phone

user guide.

This function is not supported by

all mobile phones.

1. Press the PTT key briefly.

2. Say the name.

If the name is recognised the

mobile phone will dial the rel-

evant phone number.

If the name is not recognised,

press the PTT key again to

redial.

Dialling using the mobile

phone

1. Dial as normal using the

mobile phone.

2. Press the PTT key briefly to

continue the call using the

headset.

Ending a call

Hold down the PTT key. The call is

ended. The headset remains

ready for operation.

Setting the volume

Use the rocker switch to set the

volume.

The volume setting on the head-

set does not affect the settings

on the mobile phone.

Accepting a call

Press the PTT key briefly.

Holding a call

Press the PTT key briefly. To con-

tinue the call press the PTT key

again.

right page (19) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en) 19

Call waiting/swapping

between calls

Call waiting

During a call, you may be

advised that there is another call

waiting. You will hear a special

tone during the call.

To accept the new call, press the

PTT key. The existing call is put

on hold.

You have the following options:

Swapping

To swap between the two calls,

press the PTT key briefly.

Rejecting the current call

Hold down the PTT key. The active

call is ended.

The second call is put on hold.

Press the PTT key briefly to

resume this call.

Picking up a call

From the phone to the headset

Press the PTT key briefly.

From the headset to the phone

Use the control keys on the

mobile phone. Please read the

phone’s user guide.

Muting the microphone

You can mute the microphone

during a call. The recipient can

no longer hear you. To do this,

press the mute key.

Device information/

caring for your head-

set

Maintenance advice

• Clean the headset with a

damp cloth or an anti-static

cloth. Do not use chemical

cleaning agents.

• Protect the headset against

moisture and knocks. Do not

expose your headset to direct

sunlight.

left page (20) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en)

Declaration of conformity

FCC:

This device conforms with Part

15 of the FCC rules. Precondi-

tions for operating the device:

(1) the device causes no harmful

interference, and (2) is not

affected by any form of interfer-

ence, including interference that

can have undesirable effects.

Canada: Licence No. IC xxxxxx

right page (21) of Bluetooth Headset multi, A30880-N7401-A100-1-SP19 (18. December 2003,

Headset PTT Bluetooth™ (en) 21

Technical data

* Depending on the mobile

phone used

Customer service

You will be given personal advice about

our range of products on our Premium

Hotline:

Germany 0190 - 74 58 26

(1.24 euros/minute)

Austria 0900 - 30 08 08

(1.35 euros/minute)

Qualified Siemens employees are wait-

ing to offer you expert information about

our products and installation.

Should repairs become necessary

please contact one of our service cen-

tres (S. 123).

Li-ion bat-

tery

XXX mAh

Charging

time

approx. 2.5 hours

Standby

time

up to 150 hours

Talk time up to 4 hours*

Range max. 10 metres,

less in buildings

Weight approx. 25 gram

Type of pro-

tection

IP20

We offer fast, individual advice! You

have several options:

Our online support on the Internet:

www.my-siemens.com/

customercare

We can be reached any time, any

place. You are given 24 hour support

on all aspects of our products. Here

you will find an interactive fault-find-

ing system, a compilation of the most

frequently asked questions and

answers, plus user guides and cur-

rent software updates to download.

Note

When calling customer service,

please have ready your receipt, the

headset identity number and the

phone identity number (IMEI, to dis-

play press *#06#), the phone’s soft-

ware version (to display press *#06#,

then§Info§) and if necessary your Sie-

mens Service customer number.

GN Audio USA HHB600 HHB600 User Manual Bluetooth Headset en

GN Netcom Inc HHB600 Bluetooth Headset en

Contents

UserMan

Navigation menu

Namespaces

Views

Navigation