GN Audio USA HS850 Motorola HS850 User Manual Bluetooth EN

GN Netcom Inc Motorola HS850 Bluetooth EN

Manual

DRAFT 1HS850Wireless Headsetwith Bluetooth®Technology
DRAFT 2
DRAFT 1WelcomeThe Motorola Wireless Headset HS850 makes connectivity invisible and reliable. It is astonishingly advanced and simple to use.Motorola is actively creating Bluetooth solutions for work, for play, for home, for life-everywhere around the globe.Thank you for choosing the Motorola Wireless Headset HS850 with Bluetooth® technology!6809489A97-O
DRAFT 2Safety and General Safety and General InformationIMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION. READ THIS INFORMATION BEFORE USING YOUR DEVICE.Users are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21.This device complies with part 15 of the FCC Rules. Operation is subject to the
DRAFT Safety and General3following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3).Electromagnetic Interference/CompatibilityNote: Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequately shielded, designed, or otherwise configured for electromagnetic compatibility.FacilitiesTo avoid electromagnetic interference and/or compatibility conflicts, turn off your device in any facility where posted
DRAFT 4Safety and General notices instruct you to do so. Hospitals or health care facilities may be using equipment that is sensitive to external RF energy.AircraftWhen instructed to do so, turn off your device when on board an aircraft. Any use of a device must be in accordance with applicable regulations per airline crew instructions.Medical DevicesHearing AidsSome devices may interfere with some hearing aids. In the event of such interference, you may want to consult with your hearing aid manufacturer to discuss alternatives.Other Medical DevicesIf you use any other personal medical
DRAFT Safety and General5device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. Industry Canada Notice to UsersOperation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device Ref IC RSS 210 Sec. 5.11. The term “IC:” before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were
DRAFT 6Safety and General met. It does not imply that Industry Canada approved the equipment. See Ref IC Self-Marking 6(f) and RSP-100 Sec. 4.FCC Notice to UsersThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
DRAFT Safety and General7equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•Reorient or relocate the receiving antenna.•Increase the separation between the equipment and the receiver.•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.•Consult the dealer or an experienced radio/TV technician for help.
DRAFT 8IntroductionIntroductionHeadset Features1—Headset Indicator LED Provides visual cue about headset status.2—Volume Control Buttons Adjusts speaker (receive) volume up and down.91823107546
DRAFT Introduction93—Microphone Picks up your voice input.4—Boom Contains microphone and controls power (On/Off) status of headset.5—Earhook Attaches headset to ear.6—Speaker Plays the sound you receive on the call.7—Charging Port Receives the plug for your battery charger.8—Lanyard Loop Lets you attach a lanyard to the headset, so you can wear the headset around your neck and always keep it near.9—Multifunction Button E Controls several headset functions.10—Removable Speaker Shroud Helps channel sound to the ear. Shroud may be removed if it causes discomfort.
DRAFT 10Using Your HeadsetUsing Your HeadsetCharging Your HeadsetFirst-Time Use—Before you can use your headset, you need to charge its self-contained battery for two hours.Recharging—When you hear five rapid high tones through the headset speaker, repeated at 20-second intervals, the headset battery needs to be recharged.Over extended periods of time, batteries gradually wear down and require longer charging times. This is normal. The more you talk on the phone with the
DRAFT Using Your Headset11headset, the less standby time your battery has.The rechargeable batteries that power this product must be disposed of properly and may need to be recycled. Contact your local recycling center for proper disposal methods. Never dispose of batteries in a fire because they may explode.
DRAFT 12Using Your HeadsetHow to ChargeStep1Plug the Motorola charger into the headset, with the charger’s release tab facing down and the headset facing up.Release Tab Facing Down
DRAFT Using Your Headset132Plug the other end of the charger into an electrical outlet.While charging, the headset indicator turns on and remains on until charging is complete. The headset will not function while charging. Your headset fully charges in approximately two hours.3When charging is complete (indicators off), remove the charger from the electrical outlet, press the release tab, and detach the charger cord from the headset.Step
DRAFT 14Using Your HeadsetNote: You can also use a Motorola Original Vehicle Power Adapter to charge the headset while in your vehicle.A fully charged headset battery provides approximately:•talk time–8 hours•standby time (boom open)–200 hours
DRAFT Using Your Headset15Wearing the headsetWhen packaged, the headset is configured for wear on the right ear.Step1Open the boom, then open the earhook (45° from the headset).2Loop the earhook over your ear.3Press the headset to your ear.4Point the boom toward your mouth.
DRAFT 16Using Your HeadsetWearing on the left earWhen packaged, the headset is configured for wear on the right ear. To change it for wear on your left ear:Step1Open the boom, then open the earhook (90° from the headset).2Gently lift and pull the top of the earhook up and off the upper hinge pin. Then pull it away to remove it.3Flip the headset over.
DRAFT Using Your Headset17Pairing Your Headset and PhoneNote: You must pair your headset and phone before you can make a call.“Pairing” creates a link between devices equipped with Bluetooth wireless technology and allows the phone to remember the headset’s unique ID. Once your headset and 4Hook the bottom of the earhook onto the lower hinge pin, then lift and pull the top of the earhook over the upper hinge pin.5To change the volume button orientation, see “Controlling Headset Volume” on page 23.Step
DRAFT 18Using Your Headsetphone are paired, your headset automatically connects to your phone any time you open the boom.PairingWith the headset and phone in close proximity:
DRAFT Using Your Headset19Step Result1Put the headset into pairing mode.aWith the headset’s boom closed, press and hold the Multifunction Button E until the headset indicator turns on (about 3 seconds).bRelease the button, then open the headset boom.The headset indicator turns on.The indicator remains lit.
DRAFT 20Using Your Headset2Perform a device discovery from the phone. For details on device discovery for your phone, refer to the user’s guide for the phone.When the scan is complete, the phone displays the devices found.3Select the Motorola HS850 from the discovered devices list and confirm following the on screen prompts.Step Result
DRAFT Using Your Headset21Link to Additional DevicesYour headset can store pairing information for up to eight different devices equipped with Bluetooth wireless technology. Devices are stored in a “Paired Device List” in memory in chronological order. When an attempt to 4When prompted by the phone, enter the passkey 0000 and confirm to pair the headset with the phone.The device ID is now stored in the phone’s memory.Pairing is successful when the headset indicator flashes 10 times rapidly.Step Result
DRAFT 22Using Your Headsetpair to more than eight devices is made, the oldest paired device is removed from the list. Any of the eight paired devices can initiate a paired connection to the headset.The headset will only automatically initiate a paired connection (via opening the boom) with the last device it was connected to. If you want to connect the headset to another device in the paired device list, you must initiate the connection from that device. Whichever of the eight devices initiates a connection to the headset afterwards, that device then becomes the “last connected” device.
DRAFT Using Your Headset23Controlling Headset VolumeIncreasing and Decreasing VolumeTo increase speaker volume, press the top volume button repeatedly until you reach the desired volume level.To decrease speaker volume, press the bottom volume button repeatedly until you reach the desired volume level.
DRAFT 24Using Your HeadsetVolume OrientationTo change the volume button orientation for left or right ear:Repeat the above steps anytime to change the volume button orientation.Step1With the headset’s boom closed, press and hold the Multifunction E button until the headset indicator turns on (about 3 seconds).2Press the volume button that you want to use as the volume up. The headset indicator will flash several times to indicate success.
DRAFT Using Your Headset25Making and Receiving CallsYour headset supports both Hands Free and Headset Profiles. Accessing call functions depends on which profile your phone supports. Note: Some phones do not support all features listed. Please consult your phone user’s guide.You can activate call functions for both according to the following table:
DRAFT 26Using Your HeadsetDevice Status ActionPhone Headset Hands Free ProfileEnter Pairing (Configuration) Mode:On Off (boom closed)Press & hold E until LED remains lit. Release E, open boom.Make a Voice Dial Call:On in idle On Short press E, speak name, phone dials callDial a Number:On–user dials numberOn N/ARedial a Number:
DRAFT Using Your Headset27On–Voice dialing turned on or offOn–(Idle)Long press EEnd a Call:On–in call On Short press EDevice Status ActionPhone Headset Hands Free ProfilePut Active Call On Hold:On–in call On Long press EReceive a Call:On–phone ringsOn Short press E (call is answered)Device Status ActionPhone Headset Hands Free Profile
DRAFT 28Using Your HeadsetReject a Call:On–phone ringsOn Long press EAnswer 2nd incoming call:On–in call, 2nd call coming inOn Long press E, places 1st call on hold, answers incoming callToggle between two active calls:On–in call, 2nd call on holdOn Long press ETransfer call from phone to Headset:On–in call On Short press E, (call transferred to headset)Device Status ActionPhone Headset Hands Free Profile
DRAFT Using Your Headset29Note: If the link is abnormally disconnected (e.g., out of range) the headset tries to reestablish the link.Headset IndicatorsWith charger plugged in:With no charger attached:Headset Indicator HeadsetON charging in progressOFF charging completeHeadset Indicator HeadsetOFF power offON (steady) pairing mode
DRAFT 30Using Your HeadsetNote: When the wireless headset is paired to the phone and there is no activity for 5 minutes, the blue flashing LED turns off. Any button press on the headset will reawaken the headset and the flashing resumes. If you press the up and down volume buttons simultaneously during a call, the pulsing 10 rapid flashes pairing successfulflashes at a 3-second interval(.1 seconds ON 2.9 seconds OFF)standby (not on a call)pulses at an 8-second interval(2.0 seconds ON, 6.0 seconds OFF)connected (on a call)Headset Indicator Headset
DRAFT Using Your Headset31LED turns off for the duration of that call.Audio TonesAudio Tone Headset Statussingle high tone when pressing volume buttonvolume maximum or minimum reachedfive rapid high tones, repeated every 20 secondslow batteryno audio indications; deteriorating audio qualityout of rangeseries of 4 tones, low to highaudio link open (Headset mode), active call (Hands Free mode)
DRAFT 32Using Your Headsetring tone incoming callsingle high tone pairing confirmationsingle low tone initiate voice activationdual high/low tone voice tag not recognizedsingle high tone end callseries of 4 tones, high to lowaudio link closed (Headset mode), call ended (Hands Free mode)fast high/low tone every 5 seconds (max. & min. volume confirm beep)no network/serviceAudio Tone Headset Status
DRAFT Using Your Headset33no tone power ON/OFFAudio Tone Headset Status

Navigation menu