GN Audio USA HSC030W Bluetooth Headsets(Mono and Duo) User Manual
GN Netcom Inc Bluetooth Headsets(Mono and Duo) Users Manual
Users Manual
NEED MORE HELP? For all support go to jabra.com/support 1-2-3 QUICK START FAQ VIDEOS DOWNLOADS TROUBLESHOOTING CONTACT SUPPORT jabra.com/evolve II 81-03922 D JABRA EVOLVE II GET STARTED IN UNDER MINUTES jabra.com/evolve II © 2015 GN Netcom A/S (North America: GN Netcom US, Inc.). All rights reserved. Jabra® is a registered trademark of GN Netcom A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Netcom A/S is under license. (Design and specifications subject to change without notice). MADE IN CHINA MODEL: HSC030W FCC ID: BCE-HSC030W IC: 2386C-HSC030W 外箱・中箱 外箱・袋 Declaration of Conformity can be found on www.jabra.com/CP/US/declarations-of-conformity ENGLISH...................................... 1 简体中文..................................... 5 繁體中文..................................... 9 ČESKY.........................................13 DANSK/SVENSKA..................17 NEDERLANDS.........................21 FRANÇAIS.................................25 FRANÇAIS.................................29 DEUTSCH..................................33 ITALIANO..................................37 日本語........................................41 한국어........................................45 POLSKI.......................................49 PORTUGUÊS............................53 PORTUGUÊS............................57 РУССКИЙ..................................61 ESPAÑOL...................................65 ESPAÑOL...................................69 TÜRKÇE......................................73 1 HOW TO CONNECT CONNECT TO PC (USING JABRA LINK 360) Plug the Jabra Link 360 dongle into a USB port on your PC. The headset and the Jabra Link 360 are already pre-paired. CONNECT TO MOBILE DEVICE (USING BLUETOOTH) Wear the headset and hold (3 secs) the On/off/connect switch in the connect position until you hear the voice-guided instructions. The Bluetooth indicator will flash blue. CONNECT TO PC (USING USB CABLE) Plug the headset into any USB port on the PC using the supplied USB cable, and ensure the headset is switched on. 2 HOW TO WEAR ENGLISH POSITION THE MICROPHONE It is recommended to position the microphone close to your mouth (0.5 inches). The microphone is bendable for personal preference. STORING THE MICROPHONE When listening to music or outdoors, the microphone can be magnetically stored in the headband groove. 3 HOW TO USE Busylight indicator Volume up On/off/connect switch Answer/end button Volume down/ mute microphone Battery indicator Microphone boom-arm Bluetooth indicator USB/charging port DID YOU KNOW? You can download the full user manual from jabra.com/evolve65 FUNCTION ACTION Headset on/off Slide the On/off/connect switch Bluetooth connect Hold (3 secs) the On/off/connect switch in the connect position Answer/end call Tap the Answer/end button Reject call Double-tap the Answer/end button Adjust speaker volume Tap the Volume up or Volume down button Busylight on/off Simultaneously tap the Volume up and Volume down button Mute/unmute microphone Press and hold (2 secs) the Volume down button CHARGING THE HEADSET The headset will charge when connected to a PC, or when using any USB wall charger supplied with your mobile device. It takes approx. 3 hours to charge. Federal Communication Commission (FCC) Radiation Exposure Statement: Power is so low that no RF exposure calculation is needed. FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. IC Radiation Exposure Statement: The SAR limit of IC is 1.6 W/kg averaged over one gram of tissue. Device types HSC030W has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly for head is 0.082 W/kg. IC statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. Federal Communication Commission (FCC) Radiation Exposure Statement: Power is so low that no RF exposure calculation is needed. FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Radiation Exposure Statement: The SAR limit of IC is 1.6 W/kg averaged over one gram of tissue. Device types HSC030W has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly for head is 0.082 W/kg. IC statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2015:12:22 09:13:21+08:00 Creator : Adobe Acrobat Pro 9.3.2 Modify Date : 2015:12:22 09:18:32+08:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2015:12:22 09:18:32+08:00 Creator Tool : Adobe Acrobat Pro 9.3.2 Format : application/pdf Document ID : uuid:ff77b119-b08f-4350-9b7f-7905da78b07d Instance ID : uuid:89a9f611-0a5b-466b-8375-04c139835efd Producer : Adobe Acrobat Pro 9.3.2 Page Count : 11EXIF Metadata provided by EXIF.tools