GOLD FINGERS TECHNOLOGY BTH100 Bluetooth Earphone User Manual BTH100 Instructions 20150724

GOLD FINGERS TECHNOLOGY CO.,LTD Bluetooth Earphone BTH100 Instructions 20150724

User Manual

IntroductionThank you for choosing the Sport Bluetooth Earphone. This manual will guide your operation, please read through the manual before using the earphone.1.Keep the earphone away from sharp edges, uneven surfaces, metal components and other damages.2.Do not modify, repair or disassemble the earphone without professional instruction.3.Do not clean the earphone with corrosive or volatile liquid.4.Do not use the earphone in a hazardous environment.Packing List11*Sport Bluetooth Earphone(The earphone is with middle size ear buds and ear hooks.)1*USB Charging Cable2*spare ear buds(Big and small sizes)2*spare ear hooks(Big and small sizes)Power on : Press the “ ” button for 3 seconds to power on the device, voice guide “Power on” and LED light flashes in blue slowly.Enter the pairing mode:In power off status, press the “ ” button to power on the device and keep holding the button for another 5 seconds to enter pairing mode, voice guide “Pairing”，LED light quickly flashes in red and blue alternately.Increase Volume: Press “+” button.Decrease Volume: Press “-” buttonGeneral Functions2BTH100 USB Charging CableEar Buds Ear-HooksBluetooth Connection1.The earphone can be connected with mobile devices and computers via Bluetooth. 2.Power on the earphone and enter pairing mode.3.Activate the Bluetooth software on the mobile devices/computers, select “BTH100” from the found devices to connect, if connection pin code need, please enter “0000”.4.The will be a voice guide “Paired” when successfully connected. You can start to enjoy music now.Please charge the earphone via USB charging cable, LED light is in red during charging, and it's turned into blue when the earphone is fully charged.The earphone will be fully charged within 2 hours, over timecharging will decrease the battery life.Bluetooth version: V4.1Bluetooth profile: HFP, HSP, A2DP, AVRCPRF range: 10mNoise reduction: CVC6.0Standby time: 175 hoursPlay time: 4-5 hoursTalk time: 4.5 hoursCharging time: 1-2 hoursDimension: 40*24*33.5mmWeight:16.5gTechnical Specifications43Power Off: Press the “ ” for 3 seconds, voice guide “Power Off” and LED light turns off.Low battery warning: LED light flashes in red, and voice guide “ Battery Low”.Charging: Charge the earphone via USB cable, LED light is in red.Answer call: Press the “ ” to answer the call.End Call: Press the “ ” to end the call.Reject call: Double press the “ ” button to reject a call.Charging your deviceBluetooth Earphoneuser manualBTH100—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1)This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.changes or modifications not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment .The device has been evaluated to meet general RF exposure requirement.The device can be used in portable exposure condition without restriction.FCC Information and CopyrightThis equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interferenceto radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user isencouraged to try to correct the interference by one or more of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consult the dealer or an experienced radio/TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:(1)This device may not cause harmful interference, and(2) this device must accept any interference received, including interference that maycause undesired operation.changes or modifications not expressly approved by the party responsible for compliance couldvoid the user's authority to operate the equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment .The device has been evaluated to meet general RF exposure requirement.The device can be used in portable exposure condition without restriction.

Navigation menu