GROWATT NEW ENERGY TECHNOLOGY SHINE Data-Logger User Manual Shine pano

Download:
Mirror Download [FCC.gov]
Document ID	2018346
Application ID	A9rznVMmSU6ZYiR+a40vcg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	237.96kB (2974550 bits)
Date Submitted	2013-07-17 00:00:00
Date Available	2013-07-17 00:00:00
Creation Date	2013-07-10 18:14:40
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2013-07-10 18:14:40
Document Title	Microsoft Word - Shine pano User Manual
Document Creator	PScript5.dll Version 5.2
Document Author:	0111

Shine WebBox
User Manual
Content
1 Introduction ................................................................................................................................... 3
1.1 Interface .............................................................................................................................. 3
1.2 LED Status Display ............................................................................................................... 4
2 Shine WebBox Installation.............................................................................................................. 5
2.1 Package List ................................................................................................................. 5
2.2 Shine WebBox hung vertically ..................................................................................... 6
2.3 Shine WebBox placed on plane ................................................................................... 8
3 Operation Instruction ..................................................................................................................... 8
3.1 Connection .......................................................................................................................... 8
3.1.1 Network Diagram ..................................................................................................... 8
3.1.2 Wired Communication ............................................................................................. 9
3.1.3 Wireless Communication ....................................................................................... 10
3.2 Shine Server Installation.................................................................................................... 11
3.3 Login .................................................................................................................................. 14
3.4 Server Setting .................................................................................................................... 19
3.5 Tcp Setting ......................................................................................................................... 20
4. FAQ .............................................................................................................................................. 22
Appendix A ...................................................................................................................................... 24
Appendix B ...................................................................................................................................... 26
Contact ............................................................................................................................................ 28
1 Introduction
Shine WebBox is specially designed for solar power plant remote
monitoring. While supporting both wired and wireless communication, Shine
WebBox can simultaneously monitor, record and analyze inverter operating
parameters real time with a maximum quantity of 50.
1.1 Interface
Figure 1‐1‐1
No.
Name
Description
Switch
Power supply interface
RS232 interface
LAN interface
Power Switch, Turn
ON/OFF ShineWebBox
Supply power to Shine
WebBox
Only for debugging use,
when developing
Connect Shine WebBox
with ShineServer in local
area network(LAN)
See, of which 2.4 to RS485
lines ,Other used for active
COM
and reactive power regulation
USB interface
SD‐CARD socket
ANTENNA
Connect USB driver for
firmware update
Connect SD‐CARD for data
storage
Receives wireless signal
NORMAL‐LED
Refer to 1.2
10
FAULT‐LED
Refer to 1.2
Table 1
1.2 LED Status Display
Red light
Green light
Meaning
●
●
Initialization
○
·
Searching inverters
○
·
Standby
○
●
Normal operation
●
○
Plant has reported a fault or
no SD card in Shine WebBox
Table 2
● LED ON
○ LED OFF
· LED blinks slowly
· LED blinks fast
2 Shine WebBox Installation
2.1 Package List
Open Shine WebBox package, you will see the following items.
Position
Designation
Shine WebBox
5V power adapter
2G SD card
RS485 terminal
Plastic column
M3.5*20 screws
User manual
Bracket
Table 3
Quantity
Figure 2‐1‐1
2.2 Shine WebBox hung vertically
Operation steps as following
(1) Install the bracket to the vertical plane.
Figure 2‐2‐1
(2) Install Shine WebBox to the bracket.
Figure 2‐2‐2
(3) After finishing installing, the Shine WebBox will be hung like the following
figure.
Figure 2‐2‐3
（4）Connect RS485 cable which is connected to inverters(Refer to 3.1.1) or
connect wireless modules to inverters(Refer to 3.1.2).
（5）Connect network cable.
（6）Insert SD card before turning on Shine WebBox(if not ,SD card will not be
read).
（7）Connect power adapter.
（8）Turn on power switch.
2.3 Shine WebBox placed on plane
Operation steps as following
(1)Put Shine WebBox on plane，as following figure.
Figure 2‐3‐1
(2）Connect RS485 cable which is connected to inverters(Refer to 3.1.1) or
connect wireless modules to inverters(Refer to 3.1.2).
（3）Connect network cable.
（4）Insert SD card before turning on Shine WebBox(if not ,SD card will not be
read).
（5）Connect power adapter.
（6）Turn on power switch.
3 Operation Instruction
3.1 Connection
Shine WebBox supports both wired and wireless communication.
3.1.1 Network Diagram
The following figure is Network Diagram, it shows how to connect inverter, ShineWebBox, router
and PC together (For each inverter, one way need to be selected, RS485 connection or ZigBee,
and they can not exist at the same time.)
Figure 3‐1‐5
3.1.2 Wired Communication
Shine WebBox can monitor 32 inverters by RS485 simultaneously.
Please connect the Shine WebBox and inverter by RS485 cable as following
figures.
Shine WebBox
Inverter
Terminal 2
Terminal 1
Figure 3­1­1
Figure 3­1­2
Communication address setting
Set each inverter communication address to be fixed address in sequence,
ranging from 1 to 32. Please refer to Appendix A (communication address setting).
3.1.3 Wireless Communication
Connect one ZigBee transmitter to each inverter through RS232 interface,
and one Shine WebBox can monitor 30 inverters simultaneously. (Please refer to
wireless adapter user manual to see the internal setting of wireless adapter)
10
Figure 3‐1‐4
3.2 Shine Server Installation
Procedure
1. Contact Growatt for software “Shine Server”.
2. Double click the “ .exe“ file, then the following interface will appear as
figure 3‐2‐1.
11
Figure 3‐2‐1
3. Click next, then shown as following figure 3‐2‐2.
Figure 3‐2‐2
4. Click next, then shown as following figure 3‐2‐3.
12
Figure 3‐2‐3
5. Click install, then shown as following figure 3‐2‐4.
Figure 3‐2‐4
13
6. Click finish, and installation finished as figure 3‐2‐5.
Figure 3‐2‐5
3.3 Login
1. Connect Shine WebBox and the server with Shine Server in the same local
area network (LAN).
2. Set IP address of the server to 192.168.1.74, as figure 3‐3‐1.
14
Figure 3‐3‐1
3. Run Shine Server as administrator. Shine Server icon will appear on
system tray.
Figure 3‐3‐2
15
4. Right click the icon, and select “start server”.
Figure 3‐3‐3
5. Right click the icon again and select “open interface”; or input
http://192.168.1.74:5678 in the browser.
Note: Please use Chrome browser for better performance.
16
Figure 3‐3‐4
6. Click “Account” menu and select “Login”.
Figure 3‐3‐5
17
Figure 3‐3‐6
7. Input Password (Initial Password is 123456).
Note: Password can be modified after login successfully by clicking “Account”
and selecting “Modify password”.
Figure 3‐3‐7
18
3.4 Server Setting
1. After login successfully, single click “Interface” then “Plant Setting”, a
following pop‐up interface will appear as figure 3‐4‐1.
Figure 3‐4‐1
2. Enter the info you need in order, take the example of figure 3‐4‐2.
Figure 3‐4‐2
3. Single click “Submit”, the main interface will display as figure 3‐4‐3.
19
Figure 3‐4‐3
3.5 Tcp Setting
1. Single click “Search Device” then “Tcp setting”, a following pop‐up interface
will appear as figure 3‐5‐1.
Figure 3‐5‐1
2. Single click “Start Server”, then click the list on the left side in Tcp Setting as
figure 3‐5‐2.
20
ShineServer
connected
Shine WebBox
Figure 3‐5‐2
3. Single click Shine Server to connect Shine WebBox，then you will see
parameter info of corresponding Shine WebBox as figure 3‐5‐3.
Figure 3‐5‐3
21
4. FAQ
1 .RS485&ZigBee can’t set up communication
Possible cause
（1）The COM address set in inverter is not fixed address.
（2）The address range in system setting of Shine WebBox is not right.
（3）RS485 cable is connected in a wrong way.
（4）ZigBee modules aren’t in the same network ID.
Solution
（1）Set COM address to fixed address.
（2）Shine WebBox initial address range must include addresses of all inverters.
（3）Connect RS485 cable in a right way.
（4）Set ZigBee modules in the same network ID.
2. Shine Server page can’t be opened
Possible cause
（1）“Start Server” at system tray doesn’t start.
（2）The IP address or port you visit is wrong.
Solution
（1） Start “start Server”.
（ 2 ） Enter the right IP address and port(the default IP address is
192.168.1.74,port
is
5678,so
you
need
to
enter
http://192.168.1.74:5678 into browser).
3. ShineServer can’t receive data
Possible cause
（1）Local area network(LAN) connection of Shine WebBox is not good.
（2）The IP address of the server is not matched with the IP address of Shine
WebBox.
（3）“Start Server” in “Tcp setting” of ShineServer isn’t opened.
Solution
（ 1 ） Make the local area network(LAN) between Shine WebBox and
ShineServer connect well.
（2）Set Shine WebBox address to ShineServer host address.
（3）Click “Start Server” in “Tcp setting” of ShineServer, then do visit.
4. Shine WebBox upgrading
（1）Shine WebBox adopts U disk to upgrade through USB interface, when
insert the U disk to USB interface, Shine WebBox will automatically
check if there is upgrade package in it.
（2）If an upgrade package is detected, it will upgrade automatically.
（3）After upgrading successfully, the buzzer will ring twice, Shine WebBox
22
will restart automatically. Please remember to take out the U disk, if not,
Shine WebBox will upgrade repeatedly.
5．Modify port number
Find ShineServer installation path (the default is C:\Program
Files\Growatt\Shine Server), open ShineServer folder, then config folder (open as
notepad), the default is “server.port=5678”, the port “5678”can be modified to the
port you want.
23
Appendix A
Communication address setting
1. Growatt single phase inverter
Applies to Growatt1500TL, Growatt2000TL, Growatt3000TL, Growatt4400TL,
Growatt5000TL, Sungold1500TL, Sungold2000TL, Sungold3000TL, Sungold5000TL,
Growatt3600MTL, Growatt4200MTL, Growatt5000MTL
Growatt1500TL-US, Growatt2000TL-US, Growatt3000TL-US, Growatt4400TL-US,
Growatt5000TL-US, Growatt3600MTL-US, Growatt4200MTL-US, Growatt5000MTL-US.
1. Single knock on the inverter panel until it shows: COM Address. Please refer to
the below picture.
(Growatt inverter COM Address was set to be Move as default)
2. Double knock on the inverter panel and the COM Address will be changed to
be fixed COM Address (such as 01, 02 ……). The COM Address will be saved
after the LCD turns dark.
If you want to set the COM Address to be MOVE again, double knock on the
inverter panel when the LCD display shows the COM Address.
Note: Maximum COM Address is: 255. Address 126 is for broadcasting; don’t set the COM
Address to be 126.
2. Growatt three phase inverter
Growatt10000UE, Growatt12000UE, Growatt18000UE, Growatt20000UE
Growatt10000-US, Growatt12000-US, Growatt18000-US, Growatt20000-US
24
Please refer to the below graph:
Info:
Triple knock can get back to the previous level menu, double knock can enter into
the next level menu, and single knock can move the pointer.
Set COM Address to be MOVE(or auto)
Setting‐>Set COM addr‐>Set COM Auto, then double knock on the panel and LCD
screen will display “Set OK, Mode Auto, COM addr: xxx”.
Set COM address to be fixed
Setting‐>Set COM addr‐>Set COM Manual, then double knock on the panel and
enter the COM address setting mode. Single knock on the panel can change the
value of COM Address and double knock will save changes, then LCD screen will
display “Set Addr OK! Current Addr XXX”.
Note: Maximum COM Address is: 255. Address 126 is for broadcasting; don’t set the COM
Address to be 126.
25
Appendix B
Shine WebBox Factory Warranty
For Shine WebBox, you receive a Growatt factory warranty valid for 5 years from the date
of purchase, and no more than 5 year and a half year from the date of delivery from
Growatt New Energy Co. Ltd.
This warranty covers repair or replacement parts costs incurred during the agreed
period
Excluded from warranty are damages due to:
• Breaking the product seal (opening the casing)
• Transport damage
• Incorrect installation or commissioning
• Failure to observe the user manual, the installation guide, and the maintenance
regulations
• Unauthorized Modifications, changes, or attempted repairs
• Incorrect use or inappropriate operation
• Failure to observe the applicable safety regulations
• Force majeure (e.g., lightning, overvoltage, storm, fire)
Further‐reaching or additional claims due to direct or indirect damage, especially
claims for compensation for damages due to loss of profits or due to costs arising
from disassembly and mounting, are excluded if no legally mandatory liability
applies.
Warranty condition
If a device becomes defective during the agreed Growatt factory warranty period and provided
that it will not be impossible or unreasonable, the device will be, as selected by Growatt,
• repaired by Growatt, or
• repaired on-site, or
• exchanged for a replacement device of equivalent value according to model and age.
In the latter case, the remainder of the warranty entitlement will be transferred to the
replacement device. In this case, you do not receive a new certificate since your entitlement is
documented at Growatt.
For determination of warranty eligibility, you may need to present a copy of the
purchase receipt, or a copy of the Extension Warranty Card, and the serial number of
the unit. Otherwise, Growatt is entitled to refuse to provide warranty services.
26
Extension warranty
Growatt provides 5 years extension warranty for Shine WebBox.
For warranty extension details or warranty extension please contact
service@ginverter.com, customers need to fill in a warranty extension card and send
to Growatt by email or fax, we will stamp company seal to valid it and then send back
to customers.
27
Contact
If you have any inquiry or technical problems concerning Shine WebBox, contact your installer or
Growatt.
Growatt New Energy Co., Ltd
Xicheng Industrial Zone, Bao'an District, Shenzhen, 51800, China.
Tel: +86 (0)755 2747 1942
Fax: +86 (0) 755 2749 1460
Email: service@ginverter.com
Website: www. ginverter.com
28
FCC Statement
This device complies with part 15 of the US FCC Rules and Regulations. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the US FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio‐frequency energy and, if not installed and used in accordance with
these instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment on and off, the user is encouraged to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna;
• Increase the separation between the affected equipment and the unit;
• Connect the affected equipment to a power outlet on a different circuit from that which the
receiver is connected to;
• Consult the dealer and/or experienced radio/TV technician for help.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s authority
to operate the equipment.
29

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2013:07:10 18:14:40+08:00
Create Date                     : 2013:07:10 18:14:40+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Shine pano User Manual
Creator                         : 0111
Document ID                     : uuid:32b2edba-214c-4bb4-a421-d16c5a19788c
Instance ID                     : uuid:19d1f16f-7720-4acd-8a0f-3cf4bc52ff73
Page Count                      : 29
Author                          : 0111

EXIF Metadata provided by EXIF.tools