GS Instech CC100K700 Cover4G100K User Manual

GS Instruments Co., Ltd. Cover4G100K

User manual

CoverCell25K/100K700Technician's Operational Manual& Installation GuideVe r. 1 . 0
Version 1.0  September 2010© 2010, GS Teletech, Inc. 2Contents of Box(A)Contents Picture Quantity Contents Picture QuantityRepeater 1EA Ground Cable 6.6ft (2m) 1EAMounting Bracket 1EA Ground Sems ScrewM4 x 8mm 4EAInstallation Guide CD 1EA Bracket Sems ScrewM6 x 16mm 4EAEthernet Cable6.6ft (2m) 1EA Lag Screw 1/2" x 2" 4EAPower Cord6.6ft (2m) 1EA Anchor Bolt Set 1/2" x 2" 4EARegistration Form 1EA
Version 1.0  September 2010© 2010, GS Teletech, Inc. 3Contents of Box(B)_OptionContents Picture Quantity Contents Picture QuantityRF Cable33ft(10m) 1EAANT Pole Set 1SetRF Cable66ft(20m) 1EADonor ANT 1EA Cable Clamp 12EACoverage ANT 1EA (+)FH Tapping Screw for ClampØ4 x 25mm 24EACable Tie 12EA Universal Filter Kit 1EAWide Band 2way Splitter (300MHz - 2.5GHz) 1EA
Version 1.0  September 2010© 2010, GS Teletech, Inc. 4The images for the User Interface in this publication may vary from the repeater’s depending on its S/W Version.Copyright© 2010, GS Teletech, Inc.All Rights ReservedPrinted in Republic of Korea Revision HistoryDate Version Changes09/2010 1.0 OriginalCerticationUL/FCC: This equipment complies with UL and FCC
Version 1.0  September 2010© 2010, GS Teletech, Inc. 5Warnings and HazardsWARNING! ELECTRIC SHOCKOpening the BDA (bi-directional amplier) could result in electric shock and may cause severe injury. WARNING! EXPOSURE TO RF Working with the repeater while in operation, may expose the technician to RF electromagnetic elds that exceed FCC rules for human exposure. Visit the FCC website at http://www.fcc.gov/oet/rfsafety to learn more about the effects of exposure to RF electromagnetic elds.WARNING! DAMAGE TO EQUIPMENT Operating the BDA with antennas in very close proximity facing each other could lead to severe damage to the repeater.RF EXPOSURE & ANTENNA PLACEMENTActual separation distance is determined upon gain of antenna used.Please maintain a minimum safe distance of at least 8 inch while operating near the donor and the server antennas.Also, the donor antenna needs to be mounted outdoors on a permanent structure.WARRANTYUnauthorized opening or tampering the BDA will void all warranties.One-year Warranty will start when the ownership of CoverCell25K/100K700 is transferring. CAUTION: REPEATER SHOULD BE INSTALLED AS CLOSE AS POSSIBLE TO POWER SOURCE. CAUTION: THIS REPEATER IS FOR INDOOR USE ONLY AND SHOULD BE LOCATED INSIDE OF BUILDING. CAUTION: RISK OF EXPLOSION IF BATTERY ON CONTROLLER BOARD IS REPLACED WITH AN INCORRECT TYPE. CAUTION: DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.!!!!
Version 1.0  September 2010© 2010, GS Teletech, Inc. 6System Specication
Version 1.0  September 2010© 2010, GS Teletech, Inc. 7Mounting RepeaterMasonry Wall1. Using a pencil, mark the location of each of the mounting bracket's four mounting holes on the wall.2. Drill holes in the wall at the locations marked in step 1.3. Set the anchors in the wall using a hammer.4. Locate the four mounting bolts and place a lock washer and at washer on each bolt.5. Place the mounting bracket over the four holes with anchors, making sure that the washers are on the repeater side of the mounting bracket. Tighten bolts until secure.Anchor Bolt Set1/2" x 2"RF RepeaterMasonry WallMounting Bracket<Figure 1> Mounting the Repeater on a Masonry Wall
Version 1.0  September 2010© 2010, GS Teletech, Inc. 8Mounting RepeaterWood-Framed Wall1. It is recommended to rst attach a sheet of plywood to the wall. The sheet of plywood should be anchored to the studs in the wall.2. Using a pencil, mark the location for each of the mounting bracket's four mounting holes on the plywood.3. Place the mounting bracket over the four lag screws heads.4. Thread a lag screw at the positions marked in step 2.<Figure 2> Mounting the Repeater on a Wood-Framed Wall Lag Screw1/2" x 2"RF RepeaterWood-Framed WallMounting Bracket
Version 1.0  September 2010© 2010, GS Teletech, Inc. 9Bracket Sems ScrewM6 x 16 mmGround Sems Screw M4 x 8 mmGround lug detail drawingTo approved ground source!<Figure 3> Hanging and Grounding the RepeaterHanging and Grounding1. Hang the Repeater from the mounting bracket.2. Locate the four Bracket Sems Screws with installed washers. Tighten bolts until secure.3. Locate the ground lug on the underside(or side) of the repeater.4. Crimp the ground cable to the ground lug.5. Route the free end of the ground cable to an approved(per local code or practice) ground source. CAUTION Ground cable must be properly grounded to provide both EMI and voltage surge protection for the repeater.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 10Mounting Coverage & Donor ANT10ft
Version 1.0  September 2010© 2010, GS Teletech, Inc. 11Coverage• Common Condition 1. System Output Power -> LTE : 0dBm/FA @ pilot 2. Mobile Input Power : -90dBm/FA @ pilot 3. Donor Antenna Gain -> LTE : 8dBi 4. Coverage Antenna -> Common : 2dBi• SUBURBAN 5. LTE : 1 channel -> 9dBm/total @ EIRP<Small Room>Path Loss = 32.44+20Log[Frequency]+20Log[Distance(km)]+Indoor Loss
Version 1.0  September 2010© 2010, GS Teletech, Inc. 12Coverage• Common Condition 1. System Output Power -> LTE : 6dBm/FA @ pilot 2. Mobile Input Power : -90dBm/FA @ pilot 3. Donor Antenna Gain -> LTE : 8dBi 4. Coverage Antenna -> Common : 2dBi• SUBURBAN 5. LTE : 1 channel -> 15dBm/total @ EIRP<Small Room>Path Loss = 32.44+20Log[Frequency]+20Log[Distance(km)]+Indoor Loss
Version 1.0  September 2010© 2010, GS Teletech, Inc. 13Mounting Donor & Coverage ANTMounting Donor ANT Pole①②③④
Version 1.0  September 2010© 2010, GS Teletech, Inc. 14Mounting Donor & Coverage ANT
Version 1.0  September 2010© 2010, GS Teletech, Inc. 15Mounting Type <Pole Mount> <Wall Mount>
Version 1.0  September 2010© 2010, GS Teletech, Inc. 16Vertical TiltVertical Beam Width 35 DegBolt
Version 1.0  September 2010© 2010, GS Teletech, Inc. 17Horizontal TiltHorizontal Beam Width 90 DegBolt
Version 1.0  September 2010© 2010, GS Teletech, Inc. 18Mounting Coverage & Donor ANTItem RemarkDonor ANT(1) Setting the direction of Donor Antenna (2) A donor antenna needs to be located in a place which maintains maximum receiving signal levels and attains highest Ec/lo values from BTS.(3) It is recommended that the antenna needs to be protected by placing it under the protection angle from a lightening rod.(4) A donor antenna needs to be away from high pressure and high frequency facilities. When installing a donor antenna, it needs open spaces at least more than 180 degree.(5) To get enough isolation between a donor antenna and a coverage antenna, those antennas needs to be away from each other.Coverage ANT(1) Choosing an efcient emitting place – It is recommended that the antenna should not be blocked by objects.(2) For signal quality, the cable length needs to be as short as possible.(3) The antenna needs to be away from other radio frequency radiating objects such as other antennas, and CCTV equipment. Warning: In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should not be less than 40cm during normal operation. The gain of the antenna is 8 dBi.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 19Position Antenna• Customer specications should be followed for positioning the antennas properly.<Figure 4> An installer is directing Donor Antenna to nearby BTS to receive strong input signal.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 20Cable Connections• Connect Donor and Coverage Antenna! CAUTION Do not connect or disconnect cable from ANT port when power is ON<Figure 5> ANT Ports<Figure 6> DONOR ANT Port Connection <Figure 7> Covergare ANT Port Connection
Version 1.0  September 2010© 2010, GS Teletech, Inc. 21Connecting Power Cable and LED Light Veri cation• Connect Power Cable• When turning on the repeater, AGS (Auto Gain Setup) is automatically activated, which shows LED indicators are turned on one by one.• After all the LEDs are on, AGS is complete. • Please verify that all the LEDs are indicating proper input and output levels.<Figure 9> AC Power Port Connection <Figure 10> Verifi cation of LED Lights
Version 1.0  September 2010© 2010, GS Teletech, Inc. 22AGS Algorithm descriptionOscillation can be reduced in case that 3dB Attenuation is increased in an excess of Isolation Gap ATT status value : 0~2.5dB (Shutdown on , DL/UL PAM on, DL Always OSC on) 3dB~30dB (ALC on ,shutdown on , DL/UL PAM on, DL Always OSC on) Over 30dB (uplink OSC Alarm , DL/UL PAM off )References1. Isolation Check in initial set up or Reset 2. Monitoring Oscillation comparing to minimum/maximum Noise Floor level3. When Oscillation occurred, repeater attempts to stabilize Isolation through Gain control function 4. Shutdown repeater when Oscillation still occurs in Minimum Gain 5. Automatic Recovery Algorithm conversion after Shutdown statusIsolation GapATT: 3dBMax ATT (30dB)Shutdown on ,DL/UL PAM onDL Always OSC on3dB Attenuation will be increased in an access of Isolation GapALC on , shutdown on ,DL/UL PAM onDL Always OSC onUplink OSC AlarmDL/UL PAM OFFisolation Gap value Comparison ofisolation Gap value status and reducedby ATT 3dB
Version 1.0  September 2010© 2010, GS Teletech, Inc. 23LED IndicatorsLED Status Remark Application StatusTamper Tamper EnableBuilt- in t Fail Built-in test fail EnableAGC AGC Active EnableRep Mod Fail Replaceable module fail EnableReset Reset engaged EnableOSC OSC detected EnableShutdown Shutdown EnableDL ANT Fail Donor ANT circuit fail EnableDL Out Low Donor Power too low EnableUL ANT Fail Coverage ANT circuit fail Enable <Figure 11> Front LED Display
Version 1.0  September 2010© 2010, GS Teletech, Inc. 24Input /Output Power Signal• Please note the number of LED bars indicates the RSSI signal strength level at the Donor & Coverage ANT port. The tables below indicate the levels. < Input > < Output > Less than -75dBm LED 1bar-74.5dBm ~ -70dBm LED 2 bars-69.5dBm ~ -65dBm LED 3 bars-64.5dBm ~ -60dBm LED 4 barsMore than -59.5dBm LED 5 barsLess than +4.5dBm LED 1bar+5dBm ~ +9.5dBm LED 2 bars+10dBm ~ +14.5dBm LED 3 bars+15dBm ~ +19.5dBm LED 4 barsMore than +20dBm LED 5 bars
Version 1.0  September 2010© 2010, GS Teletech, Inc. 25Web UI• Before connecting to repeater, disable wireless networking functions and remove wireless broadband card. • Connect Ethernet Crossover cable from repeater LAN port to laptop.<Figure 12> WAN Port Display
Version 1.0  September 2010© 2010, GS Teletech, Inc. 26Connecting to Web UI1. Start-> Control Panel-> Network and Internet Connections! CAUTION Disable wireless connections and remove wireless broadband card.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 27Connecting to Web UI2. Right click Local Area Connections and choose Properties - If your laptop is displaying multiple LAN’s, verify which one is used for repeater connection.3. Click Internet Protocol (TCP/IP) on General Tab and click Properties
Version 1.0  September 2010© 2010, GS Teletech, Inc. 28On General Tab4. Choose “Obtain IP address automatically”5. Choose “Obtain DNS server address automatically”6 . Click “OK” to close Properties7. Click “OK” to close Properties
Version 1.0  September 2010© 2010, GS Teletech, Inc. 29Connecting to Web UI8. Right click Local Area Connections and choose Status
Version 1.0  September 2010© 2010, GS Teletech, Inc. 30Verify Assigned IP Address9. Click on “Support” tab.10. Verify assigned Default Gateway at local connection. (If IP address is not assigned, please click repair.)11. Close all windows when nished.Repeater's IP Adress
Version 1.0  September 2010© 2010, GS Teletech, Inc. 31Internet Explorer Option Settings• Proceed step by step as indicated in the following slides to delete all temporary internet les and records. 1. Open Internet Explorer -> Tools -> Internet Options
Version 1.0  September 2010© 2010, GS Teletech, Inc. 32Browser History OptionsOn the “General“ tab, in the “Temporary Internet les” section:2. Click "Delete Cookies...“ 3. Click "Delete Files...“4. Click “Apply”5. Click “OK”
Version 1.0  September 2010© 2010, GS Teletech, Inc. 33Login ScreenEnter Default Gateway’s IP address into address bar as previously described, you will be redirected to Login. Default User Name is ‘admin’, and default Password is ‘admin’. You may need to change password as described in the User Management section. 172.16.6.81admin
Version 1.0  September 2010© 2010, GS Teletech, Inc. 34List Menu• After you log in, you can see various menu page links related to the equipment.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 35Setup Wizard• Menu Select Page after logging• Click “ Initial Installation” for Setup Wizard phase• Waiting Time: Real-time
Version 1.0  September 2010© 2010, GS Teletech, Inc. 36Setup Wizard• Repeater Location setting• Click “Apply” for updating• Click “Skip” without any renewal • Waiting Time: Real-time
Version 1.0  September 2010© 2010, GS Teletech, Inc. 37Setup Wizard• Installer Contact Information setting• Click “Apply” for updating• Click “Skip” without any modi cation • Waiting Time: Real-time
Version 1.0  September 2010© 2010, GS Teletech, Inc. 38Setup Wizard• LTE Band Select Configuration setting• Click “Apply” for updating• Click “Skip” without any modification• Waiting Time: Real-time
Version 1.0  September 2010© 2010, GS Teletech, Inc. 39Setup Wizard• Antenna Setting Control setting• Click “Apply” for updating• Click “Skip” without any modification• Waiting Time: Real-time
Version 1.0  September 2010© 2010, GS Teletech, Inc. 40Setup Wizard• Waiting (Operating) Time: - Typical: 3mins - Maximum: 5mins1. Antenna only (AGS setting) is for Auto Gain Setting to optimize this repeater for  eld conditions a. Every limit level (AGC, Down/Uplink ALC) is normal (example : Standard output power) b. Auto Gain Setting will run 2. DAS (ALC downlink Limit 7dBm Setting) option is used for connecting this repeater to DAS equipment (LGC DAS, Mobile Access DAS etc), and following condition should be controlled. a. AGC turn Off b. ALC turn On c. Gain Balance turn Off d. ALC downlink limit value set +7dBm e. ALC uplink limit value set normal output power (example : Standard output power) f. Shut down turn On g. HPA turn On, If HPA turn off h. delay alarm reporting time set 5 min3. DAS (ALC downlink Limit Maximum Setting) option is used for connecting Passive DAS equipment, and 7dB downlink limit value is set as normal output power level (Example: Standard output power)!CAUTIONPlease make Path On when you run Setup Wizard if Path Off set
Version 1.0  September 2010© 2010, GS Teletech, Inc. 41Status Page• Default D/L and U/L are set at minimum Gain.• The default values in various fields will differ with different models of CoverCell25K/100K700 Repeaters.• In order to view other pages, you can click the desired menu on the top-left corner of all pages.• Changes can be made on the Status Page. This page is for checking the repeater’s conditions and settings.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 42Status Page• When an alarm goes off, the color of Status turns red.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 43Communications Conguration• Click on the Communications Conguration link.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 44RF Conguration• Click the RF Configuration link.• This menu is where installer will actually configure the Repeater.• You can change various RF values of the equipment on this page.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 45RF Conguration• In case that screen resolution is 1024 x 768, you may need to use scroll bars to view all.• Changes will not take effect until you click “Apply” button.•The default values in various fields will differ with different models of CoverCell25K/100K700 Repeaters.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 46Bandwidth and Frequency Selection1. Login as admin as above.admin
Version 1.0  September 2010© 2010, GS Teletech, Inc. 47Bandwidth and Frequency Selection2. Click RF configuration
Version 1.0  September 2010© 2010, GS Teletech, Inc. 48Bandwidth and Frequency Selection3. Choose Bandwidth and select bandwidth users want. Depending on the bandwidth, the frequency will be set accordingly
Version 1.0  September 2010© 2010, GS Teletech, Inc. 49Bandwidth and Frequency Selection6. Click Apply if all the setting is done. Please set AGS “ON”, CoverCell25K/100K700 will remember the status of AGS and perform AGS on rebooting.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 50RavenX Setting• RavenX is not supplied with Repeater and can be purchased separately from Kentrox.• An antenna or antenna cable should be connected to “Primary Celluar” port in Figure 13.• One end of an ethernet cable should be connected to “Ethernet” in Figure 1, the other end should be connected to WAN port in CoverCell25K/100K700.• Power should be connected to “Power” in Figure 1. Power supply is provided with RavenX.• RavenX will work with CoverCell25K/100K700 with its default setting.• RavenX will work with CoverCell25K/100K700 with its default setting. <Figure 13> RavenX Setting
Version 1.0  September 2010© 2010, GS Teletech, Inc. 51Alarm Conguration• Click Alarm Configuration link.• In case that Report Alarms is OFF, all alarms will be disabled. In case that Report Alarm is ON, you can enable and disable individual alarms.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 52Alarm Conguration• In case that screen resolution is 1024 x 768, you may need to use scroll bars to view all. Changes will not be made effective until you click “Apply” button.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 53Alarm ListCategory AlarmGeneralTamperPower Supply out of rangeCommunicationField replaceble module FailReset alarmManual shutdown alarmHeart beatUplinkOSC detectPower at CVG port too highSynthesizer FailHardware FailSoftware FailOut of Band emissionDownlinkDonor power too high/lowLow isolationSynthesizer FailHardware FailSoftware FailSpurious emissionInterferer power exceed
Version 1.0  September 2010© 2010, GS Teletech, Inc. 54User Management• Click on the User Management link.• On this page you can create and delete users, change passwords, and assign authorities to individual users. • Read/Write Authority means that the user can change various values.• Super User is very similar to an Administrator account. ! CAUTION DO NOT DELETE 'admin'
Version 1.0  September 2010© 2010, GS Teletech, Inc. 55Alarm Logs• Click on the Alarm Logs link.• You can see Alarm Logs regarding Web UI operation. Alarm Logs will maintain a history of up to 30 operations.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 56Logs• Click on the Alarm Logs link.• You can see Alarm Logs regarding Web UI operation. Logs will maintain a history of up to 30 operations.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 57Troubleshooting Guide• Click on the Troubleshooting link. • You can refer to this page for a general troubleshooting guide.• In case that screen resolution is 1024 x 768, you may need to use scroll bars to view all.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 58Troubleshooting• Please click “Main Page” on Menu Select Page after logging.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 59Troubleshooting• “Troubleshooting” Click
Version 1.0  September 2010© 2010, GS Teletech, Inc. 60Troubleshooting• Temperature up limit alarm - Check maximum temperature level - Check repeater’s environment conditions • Temperature down limit alarm - Check minimum temperature level - Check repeater’s environment conditions • Voltage out range alarm - Check data cable - Power supply replacement• Current out alarm - Check data cable - Drive Unit replacement - Power supply replacement• Power supply alarm - Check data cable - Power supply replacement• Signal not detect alarm - Check input signal - Drive Unit replacement • Signal low alarm - Check input signal - Drive Unit replacement
Version 1.0  September 2010© 2010, GS Teletech, Inc. 61Troubleshooting• Out of band signal overdrive alarm - ANT positioning - Drive Unit replacement• Isolation alarm - Check setup level - Reboot repeater - Check setup ANT - NMS Unit replacement• Synthesize fail alarm - Drive Unit replacement - NMS Unit replacement• Over output power - Check setup level - Reset default values - Reboot repeater - NMS Unit replacement• VSWR alarm - Reboot repeater - Check coverage ANT connection - Drive Unit replacement
Version 1.0  September 2010© 2010, GS Teletech, Inc. 62Software Upgrade• Click on the Remote Software Upgrade link. • In case that software upgrade is needed, you should use this page.• Click Browse button to select the file to upgrade from the laptop.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 63Software Upgrade• Choose the le to upgrade provided by GST. After you choose the le, you should click “upload” to send the le from your laptop to the repeater.! CAUTION Be careful not to unplug the crossover Ethernet cable during software upgrade.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 64Software Upgrade• After uploading is finished, verify that the File Name and the File Size is correct, click “Upgrade” button. Installer should wait about 2 minutes for upgrade to initialize.• User may then be prompted to log back into the Repeater.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 65System Reset• A software reset is a “soft reboot” of the repeater. To reset the software, click on ‘Software Reset’ and then click ‘Yes’ to reset the software.• Resetting the software is a good way to clear current alarms.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 66GST Technical SupportPhone:Toll Free: 1-866-9-GST-USAPhone: 913-469-6699Write:GS Teletech Inc. 6900 College Boulevard, Suite 850 Overland Park, KS 66211, USAProduct Information and Technical Assistance:www.gsteletechinc.comsupport@gsteletechinc.comSpecifications and features of this installation guide are subject to change without notice or obligation.
Version 1.0  September 2010© 2010, GS Teletech, Inc. 66 Warning: Exposure to Radio Frequency Radiation The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna should not be less than 40cm during normal operation. The gain of the antenna is 8 dBi. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu