GS Instech PSELITE78B Public Safety Repeater User Manual PS ELITE7833B Ver 1 0 rev 1
GS Instech Co., Ltd. Public Safety Repeater PS ELITE7833B Ver 1 0 rev 1
PS-ELITE7833B_User Manual Ver 1.0_rev.1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3696909 |
| Application ID | 7EiBBnblAKu337T/cdy1uQ== |
| Document Description | PS-ELITE7833B_User Manual Ver 1.0_rev.1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 385.36kB (4816984 bits) |
| Date Submitted | 2017-12-28 00:00:00 |
| Date Available | 2018-06-26 00:00:00 |
| Creation Date | 2017-12-26 16:57:55 |
| Producing Software | Microsoft® Word 2013 |
| Document Lastmod | 2017-12-26 16:57:55 |
| Document Title | PS-ELITE7833B_User Manual Ver 1.0_rev.1 |
| Document Creator | Microsoft® Word 2013 |
| Document Author: | ê³ ì„±ë¬´ |
PS-ELITE7833 Installation and Operating Manual Version 1.0 GSInstech Co., Ltd GSInstech Co., Ltd Revision History Version Author Descriptions Date 1.0 S.M Ko Draft 6 Nov 2017 Remarks Change List Version GSInstech Co., Ltd Change List Remarks Index 1. FCC and IC Mandatory .................................................................................................................................................... 1 1.1 1.2 1.3 2. 3. FCC Warning States............................................................................................................................................ 1 1.1.1 FCC Part 15.21 ........................................................................................................................................ 1 1.1.2 FCC Part 15.105 ..................................................................................................................................... 1 1.1.3 FCC Caution ............................................................................................................................................. 1 1.1.4 Radiation Exposure Statement ......................................................................................................... 1 1.1.5 FCC Warning Labels ............................................................................................................................. 1 ISED Warning state ............................................................................................................................................. 5 1.2.1 RSS-GEN, Sec. 7.1.2 – (transmitters) ........................................................................................... 5 1.2.2 RSS-GEN, Sec. 7.1.2 – (detachable antennas) ......................................................................... 5 1.2.3 RSS-131 Section 5.3 User Manual ................................................................................................. 5 1.2.4 RF Radiation Exposure ........................................................................................................................ 6 1.2.5 ISED warning label ................................................................................................................................. 6 Prohibitions .............................................................................................................................................................. 8 General Information .......................................................................................................................................................... 9 2.1 Repeater Information (FCC & ISED ID) ...................................................................................................... 9 2.2 Purpose ..................................................................................................................................................................... 9 2.3 Repeater Advantages ......................................................................................................................................... 9 2.4 Highlights .................................................................................................................................................................. 9 2.5 Exterior ................................................................................................................................................................... 10 2.6 Interior..................................................................................................................................................................... 11 Specifications .................................................................................................................................................................... 14 3.1 US Frequency Allocation ................................................................................................................................ 14 3.1.1 GSInstech Co., Ltd US frequency ......................................................................................................................................... 14 3.2 4. 5. 6. US Block Diagram ............................................................................................................................... 14 3.1.3 US Service Plan ................................................................................................................................... 14 Canada frequency ............................................................................................................................................. 15 3.2.1 Canada Block Diagram...................................................................................................................... 16 3.2.2 Canada Service Plan .......................................................................................................................... 16 3.3 Common Specifications .................................................................................................................................. 18 3.4 Mechanical Spec. .............................................................................................................................................. 19 Port and Connectors ...................................................................................................................................................... 20 4.1 RF Connector ...................................................................................................................................................... 20 4.2 AC Power Connector ....................................................................................................................................... 20 4.3 DC Battery Power Connector ....................................................................................................................... 22 4.4 External Alarm Port (Dry-Contact) .............................................................................................................. 23 4.5 Ethernet Port ........................................................................................................................................................ 25 LED and Alarm Information ........................................................................................................................................ 27 5.1 LED .......................................................................................................................................................................... 27 5.2 LED indicate for alarm ..................................................................................................................................... 27 Installation .......................................................................................................................................................................... 28 6.1 7. 3.1.2 Installation ............................................................................................................................................................. 28 6.1.1 Antenna .................................................................................................................................................... 28 6.1.2 Isolation .................................................................................................................................................... 28 6.1.3 Equipment Needed for Repeater Setup ..................................................................................... 28 6.1.4 Check points before turning on the Repeater .......................................................................... 28 6.1.5 Open for Service .................................................................................................................................. 29 Web UI ................................................................................................................................................................................. 30 7.1 Setting up the Repeater .................................................................................................................................. 30 GSInstech Co., Ltd 7.2 7.1.1 Quick UI/Configuration ....................................................................................................................... 30 7.1.2 Quick Setup ............................................................................................................................................ 30 User Interface Configuration ......................................................................................................................... 31 7.2.1 Page Login .............................................................................................................................................. 31 7.2.2 RF Status................................................................................................................................................. 31 7.2.3 RF Configuration .................................................................................................................................. 33 7.2.4 Alarm Configuration ............................................................................................................................ 34 7.2.5 Fake Alarm Configuration ................................................................................................................. 35 7.2.6 Communication Configuration ........................................................................................................ 36 7.2.7 User Management ............................................................................................................................... 37 7.2.8 Alarm Log ................................................................................................................................................ 37 7.2.9 Log ............................................................................................................................................................. 38 7.2.10 Trouble Shooting .................................................................................................................................. 38 7.2.11 Remote Software Upgrade .............................................................................................................. 39 7.2.12 Factory Default Setting ...................................................................................................................... 40 7.2.13 Configuration transfer ......................................................................................................................... 40 7.3 Web UI Ranges Table ..................................................................................................................................... 41 7.4 Troubleshooting .................................................................................................................................................. 42 7.4.1 Simple Troubleshooting Method .................................................................................................... 42 7.4.2 Troubleshooting Guide Related to RF ........................................................................................ 42 7.4.3 Troubleshooting Guide Related to NMS .................................................................................... 43 GSInstech Co., Ltd Abbreviations Abbreviation Term Definition AGC Automatic Gain Control ALC Automatic Level Control BTS Base Transceiver Station CW Continuous Wave (un-modulated signal) DAS Distributed Antenna System DFM Digital Filter Module DL Downlink The path covered from the BTS to the subscribers service area via the repeater FW Firmware HPA High Power Amplifier HW Hardware IF Intermediate Frequency LNA Low Noise Amplifier LTE Long Term Evolution MS Mobile Station PSU Power Supply Unit RF Radio Frequency RFU Radio Frequency Drive Unit SW Software UL VSWR GSInstech Co., Ltd Uplink The path covered from the subscribers service area to the BTS via the repeater Voltage Standing Wave Ratio Remark 1. FCC and IC Mandatory 1.1 FCC Warning States 1.1.1 FCC Part 15.21 The user’s manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. In cases where the manual is provided only in a form other than paper, such as on a computer disk or over the Internet, the information required by this section may be included in the manual in that alternative form, provided the user can reasonably be expected to have the capability to access information in that form. 1.1.2 FCC Part 15.105 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 1.1.3 FCC Caution 1) Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2) Antennas must be installed in accordance with FCC/ISED requirement. With 8 dBi gain antennas the height of the antenna above average terrain (HAAT) must not exceed XXXX m. For different gain antennas refer to the relevant rules. 1.1.4 Radiation Exposure Statement The product complies with the FCC12 portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user's body or set the device to lower output power if such a function is available. 1.1.5 FCC Warning Labels 1) FCC Part 15.19 GSTeletech, Inc. The FCC Certification label has attached right side of PS-ELITE7833. The FCC Certification label contained FCC 15.19 warning statement, Device type (A or B), FCC, ISED and UL ID This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2) FCC Part 90.219 Booster Warming Label is attached left side of Ps-ELITE7833. This label has contains FCC 90.219, IC warning statements and contact phone number for a trouble shooting. GSTeletech, Inc. GSTeletech, Inc. ① Class A (B9A) “WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. You MUST register Class A signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signalboosters/registration. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.” ② FCC Part 90.219 Class B (B9B) “WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. You MUST register Class B signal boosters (as defined in 47 CFR 90.219) online at www.fcc.gov/signalboosters/registration. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.” GSTeletech, Inc. 1.2 ISED Warning state 1.2.1 RSS-GEN, Sec. 7.1.2 – (transmitters) Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the Equivalent Isotropically Radiated Power (E.I.R.P.) is not more than that necessary for successful communication. Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionneravec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l’intention desautres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotroperayonnée quivalente (p.i.r.e.) ne dépassepas l’intensité nécessaire à l’établissement d’une communication satisfaisante. 1.2.2 RSS-GEN, Sec. 7.1.2 – (detachable antennas) This radio transmitter (identify the device by certification number, or model number if Category II)has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s’il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérés ci-dessous et ayant un gain admissible maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus dans cette liste,ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur. 1.2.3 RSS-131 Section 5.3 User Manual This user manual shall contain the following information on the enhancer: 1) The nominal passband gain (dB); 2) The nominal bandwidth; 3) The rated mean output power; 4) The input and output impedances, and; GSTeletech, Inc. Item The nominal passband gain Spec. 95dB The nominal bandwidth 18MHz The rated mean output power +33dBm The input and output impedances Remarks 50Ω 5) Caution "The Manufacturer's rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device." 1.2.4 RF Radiation Exposure This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of at least 100 cm with 15dBi antenna gain between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. RF exposure will be addressed at time of installation and the use of higher gain antennas require larger separation distances. L'antenne du donneur a une antenne 15dBi gain.Antenna doit être installé pour maintenir en tout temps un minimum de distance d'au moins 100 cm entre la source de rayonnement (antenne) et toute personne physique. Cet appareil ne doit pas être installé ou utilisé en conjonction avec une autre antenne ou émetteur. 1.2.5 ISED warning label 1) Booster Warming Label is attached left side of Ps-ELITE7833. This label has contains FCC 90.219, IC warning statements and contact phone number for a trouble shooting. WARNING: This is NOT a CONSUMER device. It is designed for installation by an installer approved by an ISED licensee. You MUST have an ISED LICENCE or the express consent of an ISED licensee to operate this device. GSTeletech, Inc. GSTeletech, Inc. 1.3 Prohibitions Use of unauthorized antennas, cables, and coupling devices not conform to ERP/EIRP and indoor‐only restrictions is prohibited. Preclude indications that Home/ personal use are prohibited. GSTeletech, Inc. 2. General Information This document is primarily written for those who are new to PS-LITE78A/B system and wish to tune up the equipment. The document is applicable to below products from GSINSTECH. Model number: PS-ELITE78A/B 2.1 Repeater Information (FCC & ISED ID) Certification FCC ISED Type ID B9A U88PSELITE78A B9B U88PSELITE78B B9A 8137A- PSELITE78A B9B 8137A- PSELITE78B Remarks 2.2 Purpose PS-ELITE7833 Bi-Directional Amplifier (BDA) is a repeater, which has been designed to improve signals in blanket/shadow areas inside of buildings to transmit Provider’s variety frequencies. User may choose filtering configuration according to the specific site circumstances. 2.3 Repeater Advantages It provides selectable RF power levels for any wireless technology / band. It has individual monitoring multiple technology. FPGA digital filtering provides optimized RF performance. It allows modification of technology via customer interface. It is easily installed. Frequency is easy to add / delete / change. It has scalable single and multi-service design. Customer data service is improved by FirstNet It meets all users’ technological requirements. 2.4 Highlights Dual band support 700MHz and 800MHz band by WEB UI Simultaneous Filter Supporting 1 Wide Band and 32 Non-Contiguous Narrow Bands Each band supports up to 32 channels 2W output power for each band Fan-less GSTeletech, Inc. Significant Filter Roll-off performance - Wide: 60dBc@Filter Bandwidth Edge ± 1MHz - Narrow: 60dBc@Filter Bandwidth Edge ± 6.25KHz (or Filter BW / 2)) Supports Phase 3 Dry Contact External Alarm Function supporting dry contacts 8 Digital/programmable utilizing FPGA Auto shutdown with alarm upon oscillation detection Web based GUI for intelligent configuration, SNMP supported NFPA compliant dry contact alarms, NEMA 4x enclosure 2.5 Exterior GSTeletech, Inc. 10 2.6 Interior PS-ELITE7833 consists of the following modules: GSTeletech, Inc. 11 No. Item Remarks No. Item Remarks Donor Antenna Port Control Board Service Antenna Port 10 Battery Backup Input Integrated Module 11 Ext. Alarm Connector -48V DC Duplex Cavity Filter 12 Network / UI Port Waterproof DL 700 HPA 13 AC Input Connector 110V AC Only DL 800 HPA 14 AC Input Terminal UL Integrated HPA 15 Battery Input Terminal PSU Top : RFU Bottom : DFM 1) Donor and Service antenna Port All antenna ports use a 4.3-10 Din connector. If user wants to use an N-type cable, user must use a separate adapter. (Not included) 2) Integrated Module The integration module consists of RFU and DFM. The RFU is assembled at the bottom of the integrated module, and performs amplification, filtering, and gain control on the signal that passes through the duplexer. The DFM is assembled on top of the integration module. DFM performs band select, band width adjustment and power detection according to user setting. 3) Duplexer Separation of input and output signals and isolation between paths 4) DL 700 /800 HPA Module DL 700 HPA and DL 800 HPA are made up of different modules. It amplifies the filtered and band selected signals via RFU and DFM, and maintains the output of the system. 5) UL Integrated HPA Module The UL HPA provides 700M and 800M bands as one integrated module. It amplifies the filtered and band selected signals via RFU and DFM, and maintains the output of the system. 6) PSU GSTeletech, Inc. 12 The PSU supply power to the system. The PSU receives 110V AC power and supplies + 28V DC and + 6V DC to the system. In the event of an AC power failure, the system can be powered by receiving a -48V DC power through the battery. The battery voltage input to the PSU should be -48V. If + 48V is used, the electrodes must be reversed when connecting the battery. If the required battery voltage is not used or the electrode is not suitable, the PSU may be damaged or not functioning normally. The Company shall not be held liable for the problems caused by this. 7) Control Board The control board performs functions such as system control, communication. And alarm information share through the external alarm connector. System control and communication functions are available via the Web UI and SNMP via the system RJ - 45 Port, Alarm Information Sharing is Ext. It can be connected to the External Alarm Panel via the Alarm Connector for use. 8) Battery Backup Port The system can use the battery backup system. In this case, the battery output should be 48V DC and the use of other voltage batteries are not permitted. If user wants to use the + 48V DC battery, cross the system's electrode and battery electrode when connect the battery to the system connector. User can’t be held responsible for any problems that arise from not following these recommendations 9) Ext. Alarm Connector Ext. Alarm Connector is a port used to share alarm information generated by the system with external alarm panel. Alarm information is shared through dry contact. Mapping between Alarm and Connect can be confirmed by the following table. 10) Network / UI Port The system supports Web UI or SNMP function through Ethernet to improve accessibility of external network and user. To this end, the user can connect a cable to the RJ-45 connector. All connectors and cables used should be waterproof. 11) AC Input Connector The voltage input to the system is 110V AC and the voltage input such as 220V AC is not approved. No liability or compensation shall be required by the Company for problems caused by not permitted input AC voltage. GSTeletech, Inc. 13 3. Specifications 3.1 US Frequency Allocation 3.1.1 US frequency Item Down Link Frequency Up Link Frequency 3.1.2 Specification Remark 700 (PSBB) 758MHz ~ 768MHz LTE 700 (PSNB) 769MHz ~ 775MHz P25 800 (PSNB) 851MHz ~ 861MHz P25 700 (PSBB) 788MHz ~ 798MHz LTE 700 (PSNB) 799MHz ~ 805MHz P25 800 (PSNB) 806MHz ~ 816MHz P25 US Block Diagram [MHz] Service Donor Antenna RFU DFM HPA Start Stop Start Stop Start Stop Start Stop DL 700 758 775 758 775 758 775 758 775 DL 800 851 861 851 861 851 861 851 861 UL 788 816 788 816 788 816 788 816 Remarks 3.1.3 US Service Plan GSTeletech, Inc. 14 1) The LTE network integrates Upper D band and FirstNet to have max. 10MHz Service BW. 2) The P25 Network has a Guard Band of 768-769MHz and 775-776MHz. 3.2 Canada frequency Item Down Link Frequency Up Link Frequency GSTeletech, Inc. Specification Remark 700 (PSBB) LTE Not Support 700 (PSNB) 768MHz ~ 776MHz P25 800 (PSNB) 851MHz ~ 869MHz P25 700 (PSBB) LTE Not Support 700 (PSNB) 798MHz ~ 806MHz P25 800 (PSNB) 806MHz ~ 824MHz P25 15 3.2.1 Canada Block Diagram [MHz] Service Donor Antenna RFU DFM HPA Start Stop Start Stop Start Stop Start Stop DL 700 768 776 768 776 768 776 768 776 DL 800 851 869 851 869 851 869 851 869 UL 798 824 798 824 798 824 798 824 Remarks 3.2.2 Canada Service Plan 1) Canada currently does not support LTE in the Public Services network. 2) Canadian 700MHz Public Safety band does not use Guard Band. GSTeletech, Inc. 16 GSTeletech, Inc. 17 3.3 Common Specifications Item Select Bandwidth Output Power Specification Remark PSBB – LTE 5 / 10MHz 2 Non-contiguous PSNB – B9A 6.25 / 12.5 / 25 / 50 / 75KHz PSWB – B9B 100 / 125 / 150 / 175 / 200 / 225 / 250KHz LTE (PSBB) +30dBm / 1W 700 (PSNB) +30dBm / 1W (@total) 800 (PSNB) +33dBm / 2W (@total) 32 Non-contiguous +33dBm / Total Max RF Input Power without -17dBm @ Over Drive Max RF Input Power without +10dBm @ Damage Range 50dB ~ 95dB Adjust Step ±1.0dB Adjust Accuracy ±1.0dB Propagation LTE ＜ 6us Delay PSNB ＜ 230us Gain Single Tone Power Change < +2/-4dB Input Inter-modulation LTE Adjacent Channel Power PSNB AGC, ALC Output power Change < 10dB @ ±1.25M edge ＞ 55dBc @ Ch Offset 25kHz ＞ 55dBc @ Ch Offset 50kHz Return Loss / VSWR < -14dB /＜ 1.5 : 1 Noise Figure ＜ 5dB @ Max gain Roll Offs ≤ 8% (E-TM3.1 / DL : 64QAM, UL 16 : QAM) PSNB Characteristic Impedance GSTeletech, Inc. Input CW: -40dBm ＞ 50dBc @ ± 10M ＜ 3dB LTE Input CW: -40dBm ＞ 45dBc @ ± 5M Flatness EVM ALC: 45dB Uplink Only LTE Only >60dBc @ ±1MHz >60dBc @ ±6.25KHz or outside pass-band >60dBc @ ± ½ Bandwidth 50Ω 18 3.4 Mechanical Spec. Item Specification RF Connector DIN (4.3-10) Type Female AC Power Connector MS3102A 10SL-3P AC Power Cord MS3106A-10SL-3S Battery Backup Connector MS3102A-14S-9P External Alarm Connector MS3102A-22-14P External Interface RJ-45 / USB A Type Waterproof Alarm Interface Dry Contact 20Pin AC Supply 110VAC ~ 120VAC, 60Hz 2.0A ±10% DC Supply -48V Out Dimension 13.2(W) * 18.9(H) * 6.4(D) Inches Net Weight 50 Lbs. Material Module Aluminum alloy Cabinet Aluminum alloy for casting Remark Operation Temperature -40°F to +140°F (-40°C to +60°C) Convection cooling Humidity 5% ~ 95% Non-Condensing Environmental Spec. NEMA4(x) IP66 MTBF 100,000 hour GSTeletech, Inc. 19 4. Port and Connectors 4.1 RF Connector PS-ELITE7833 adopts a Mini-DIN 4.3/10 connector. If the user wants to use an N type cable or connector, they need an adapter 4.2 AC Power Connector PS-ELITE 7833 use only 110V voltage. If the user uses other un-recommend input voltages, PSEILITE7833 may be broken. The AC Power Connector of the PS-ELITE 7833 uses MS3100A-10-10P and the user shall use a cable equipped with a cable 3106 A-10-10-3 connector to terminate the power. GSTeletech, Inc. 20 GSTeletech, Inc. 21 4.3 DC Battery Power Connector PS-ELITE 7833 use a -48V battery only. If the user uses other nonstandard input voltages, PSEILITE7833 may be broken or damaged. If the user want to use a +48V battery, it is acceptable to cross the input electrode. Pin No. Pin Name Alarm1 +48 GSTeletech, Inc. Cable Color Remarks Black Red 22 4.4 External Alarm Port (Dry-Contact) PS-ELITE7833 supports the External Alarm Box. The external alarm box is connected via the External Alarm Connector. The External Alarm Box of PS-ELITE 7833 is configured using the Dry Contact. The connection between the External Alarm Port and the External Alarm Box is made using the UL2464 # 24 10ft cable supplied with the system. GSTeletech, Inc. 23 1) PS-ELITE support external Alarm Box Pin No. Alarm No. Alarm Name Alarm1 AC Power Pin Name Cable Color NC1 Black COM1 Brown NO1 Red NC2 Orange COM2 Yellow NO2 Green NC3 Blue COM3 Violet NO3 Gray NC4 White Alarm2 Alarm3 System BDA 10 11 Alarm4 Battery Charger 12 13 14 Alarm5 15 Battery Capacity 16 17 Alarm6 18 Black & White NO4 Brown & White NC5 Red & White COM5 Orange & White NO5 Yellow & White NC6 Green & White COM6 NO6 19 Reserved 20 NC GSTeletech, Inc. Antenna COM4 Remarks Blue& White Violet & White Gray & White 24 4.5 Ethernet Port GSTeletech, Inc. 25 PS-ELITE 7833 can be connected to the parent network via Ethernet, and the user can use the WEB UI to control and monitor the relays in remote or local locations. PS-ELITE 7833 use a waterproof Ethernet port to prevent the external environment from being affected. (NEMA 4x Compliance) For complete waterproofing, the user shall use a water-proof RJ-45 cable. GSTeletech, Inc. 26 5. LED and Alarm Information 5.1 LED LED Status Green Yellow Blink Yellow Red Remarks Good Condition, The system operates normally. Minor alarm, but there is no problem with operating it Critical alarm, system may not function properly Unable to operate properly 5.2 LED indicate for alarm Name RUN ALARM SHUTDOWN Power On Green Boot Complete Green Green Green Normal Condition Green Green Green Low RSSI Green Yellow Blink Green Low Isolation Green Yellow Blink Green Communication failure Green Yellow Yellow Over Power Green Yellow Yellow AC Fail Green Yellow Yellow DC Fail Yellow Yellow Yellow RESET Yellow Red Red Shut Down Red Red Red GSTeletech, Inc. 27 6. Installation 6.1 Installation 6.1.1 Antenna The antenna used in the PS-ELITE7833 must be certified or an antenna with equivalent specifications. The company shall not bear any liability for any problems arising from the use of an uncertified antenna. 6.1.2 Isolation If the system wants to operate in the max gain state, the system requires sufficient isolation between the donor and service antennas. The system recommends isolation be higher than 15dB above the gain of the system. If isolation is not sufficiently ensured, the AOC function operates to reduce the gain to a level suitable for the ensured isolation. 6.1.3 Equipment Needed for Repeater Setup Parameter Major Component Item Quantity Remark PS-ELITE7833 Repeater 1 EA Provided by GST Wall Mounting Bracket 1 EA CD (Contains User Manual V.1.0 and Additional Components Antenna RF Cable Testing and Measuring Equipment Installation Guide V.1.0) 1 EA Provided by GSI AC Power Cable 6ft (1.8m) 1 EA External Alarm Cable 10t (3.05m) 1 EA Donor ANT 1 EA Service ANT 1 EA Antenna connection Cable TBD Not Included Spectrum Analyzer 1 EA Not Included Not Included 6.1.4 Check points before turning on the Repeater 1) System Power Check AC electrical power to the repeater should be 110V, input electricity only after power verification. 2) Input RF Signal Range GSTeletech, Inc. 28 Optimal input RSSI into the repeater is -62dBm ~ -17dBm for 700MHz/800MHz. User should verify input condition of Donor ANT. If the input RSSI exceeds -17dBm, impose the using external attenuators should be used. 3) Isolation check between DONOR/SERVEICE ANT The system must need that 110dB (Gain+15dB) isolation is secured to use 95 dB of the maximum profit of the system. User should check its condition before installation. 6.1.5 Open for Service 1) Check points before open: ① Verification of system installation status : Electricity, In/Out antennas, cable connection, and equipment mount status. ② Verification of system accessories : User should check all necessary accessories. ③ Check receipt signal level : Installer should check whether environmental conditions are in accordance with system specification to ensure that system operation will be optimized. 2) Check points after open: ① Check external LED RUN: Green light ON (Off: All LED off) ALARM: Green light in normal status, Red light in alarming SHUT DOWN: Green light in normal status, Red light in Shutdown status 6.2 Ground The PS-ELITE7833 is designed to operate at 110VAC @ 1.5A maximum current and must always be operated with the ground wire properly connected. GSTeletech, Inc. 29 7. Web UI 7.1 Setting up the Repeater 7.1.1 Quick UI/Configuration Use the following steps to commission the Repeater after all the cabling and antennas are fixed in place and the Repeater is supplied with proper electrical power. The repeater will need a good quality stable Downlink RSSI input level in the range of -85dBm to -62dBm. 1) Connect your laptop to the repeater with a Crossover Ethernet cable. 2) Verify that your laptop has all wireless connections off and is Obtaining an IP address automatically, or is using a proper fixed IP address such as: Use the following IP address: 192.168.2.1 with a Subnet Mask of 255.255.255.0 3) Open Internet Explorer and go to: 192.168.2.1 4) User name: admin 5) Password: admin 7.1.2 Quick Setup 1) Go to the RF Configuration page. 2) Before the Amplifier (HPA) can be turned on, set the Uplink and Downlink attenuation (ATT) to the maximum value and click Apply. 3) Select the correct Band Block and set the ALC Downlink and Uplink Limits to the desired level and click Apply. (To adjust the Output Power, change the ALC Downlink and Uplink Limits to the desired levels). 4) To check the Repeater’s status, click on the Status page. 5) To change the Repeater’s gain/attenuation, adjust the Uplink and Downlink attenuation in equal amounts not more than 5dB at a time and click Apply. GSTeletech, Inc. 30 7.2 User Interface Configuration 7.2.1 Page Login 1) Enter “https://192.168.2.1” in the address window and press Enter. 2) Enter the user name "admin" and the password "admin" on the connected site and click Login button to move to the Main Window. 7.2.2 RF Status 1) Can check the current repeater status and setting the repeater system. 2) Items Check of RSSI / Output Level Repeater Firmware Version and Serial Number Repeater internal temperature Alarm Status Band Select (Frequency, Band width) GSTeletech, Inc. 31 GSTeletech, Inc. 32 7.2.3 1) RF Configuration ALC Function and ALC target threat hold level set up 2) HPA On / OFF 3) Alarm On / Off, Alarm Delay Function set up 4) FirstNet (LTE) Band Select (Frequency and Bandwidth) 5) 700MHz P25 Band Select (Frequency and Bandwidth) 6) 800MHz P25 Band Select (Frequency and Bandwidth) GSTeletech, Inc. 33 7.2.4 Alarm Configuration 1) Check the status and status of the alarm on the repeater. GSTeletech, Inc. 34 7.2.5 Fake Alarm Configuration 1) Set alarm for testing purposes. GSTeletech, Inc. 35 7.2.6 1) Communication Configuration Set up the IP information for the network management communication. GSTeletech, Inc. 36 7.2.7 User Management Manage user accounts to login to WEB UI. 1) Password Change 2) User account Permission authorization and change 3) New account setting 7.2.8 Alarm Log Record the log on the alarm that occurred on the repeater. GSTeletech, Inc. 37 7.2.9 Log Can view the log in connect to the WEB UI. 7.2.10 Trouble Shooting Provide contact information to assist in trouble shooting in the event of a repeater failure GSTeletech, Inc. 38 7.2.11 Remote Software Upgrade To enhance the performance of the repeater, perform the Software Upgrade through the network. 1) Select the file to upgrade and upload the file to the repeater's memory. 2) If the file is successfully uploaded, click the Update button to proceed with the upgrade. GSTeletech, Inc. 39 7.2.12 Factory Default Setting The factory default setting is the default setting of the repeater that is controlled by the company. When performing a factory-defined setting, the L status set is initiated by the user. 7.2.13 Configuration transfer Configuration transfer can be saved setup status by storing and back up. And to change the settings by existed setup file upload. 1) The setting status of the repeater can be saved as a file on the connected PC. 2) It can be applied to the repeater by uploading the repeater setting value of the file status. GSTeletech, Inc. 40 7.3 Web UI Ranges Table GUI Feature Downlink and Uplink Output Power Display Downlink Low RF Power Downlink and Uplink Attenuation Control Downlink and Uplink ALC Limit Range Below 0dBm to 35dBm Description The output Power of the Repeater 2dB to 10dB Threshold for Low RF Power 0dB to 30dB Reduces Gain Internally 0dBm to 33dBm Limits Output Power Downlink Receive Level at Donor Downlink RSSI Display -100dBm to -17dBm Downlink Low RSSI -93dBm to -62dBm Threshold for Low RSSI HPA Control On/Off High Powered Amplifier Gain Balance Control On/Off Equalizes Uplink and Downlink Gain Gain Balance Value 0dB to 15dB Shutdown Control On/Off Auto Gain Setting On/Off Auto Oscillation Check On/Off Temperature Display Band Blocks Used/Bandwidth Delay Alarm Report GSTeletech, Inc. 32 to 260.6 Degrees Each AMP 0 or 5 Minutes Antenna Port Subtract Uplink Gain by G/B Value Shutdown if Major Alarm is Reported Automatic Gain Setting for the Repeater Preventing Oscillation Internal Repeater Temperature The Channel the Repeater will be using Time Delay of Reporting after Alarm is Detected 41 7.4 Troubleshooting In case of abnormal operation, technician should diagnose abnormality via remote access or directly connecting to repeater using Ethernet cable. If technician is required to conduct repairs due to major alarm, repeater should first be powered off, and then technician should prepare the proper measurement equipment before trying to fix the problem. In most cases of major repairs, GST will simply replace the unit and conduct repairs at the appropriate facility. 7.4.1 Simple Troubleshooting Method 1) Verify LED Status, both on external and internal module LED’s - Normal operation: Green light on. Alarming: Red LED on. 2) Technician should check external and internal connectors to ensure that all connections are tightly secure. These connectors should be cleaned regularly. 3) If technician thinks there is a serious problem, call after sales team for over-the-phone technical support. 1-913-469-6699. 7.4.2 Troubleshooting Guide Related to RF Item Check Point System input power range (DL/UL) System gain (DL/UL) Check before Output power at server system operation port (DL/UL) Check points before open for service Troubleshooting -Downlink: -100dBm ~ -17dBm -Uplink: -100dBm ~ -17dBm - 50dB ~ 95dB - Downlink: 33dBm ± 2dB - Uplink: 33dBm ± 2dB -Please check quantity of all accessories with specification before you set up -Fit cable length in accordance with field condition Check following status; -Verify that the antennas are securely mounted and pointed in the correct directions -Connection status between antennas and RF cable Check after Check points after system operation open for service -Verify that the Repeater is securely mounted -Proper AC power status -Grounding status of electrical circuit -Coaxial cable (RF) construction status -Connectors and combiners connection status -Cable connection status against leakage of water When repeater does not work properly GSTeletech, Inc. Check electricity cord connection status -Re-Connection in power Cable 42 Please Check following status; -Make sure Server Antenna Port is disconnected. DL VSWR alarm -Please reset Adapter upon completing Alarm troubleshooting -Make sure output power is operating normally DL / UL -Please reset Over-output alarm Adapter upon completing Alarm troubleshooting Check following status; When in alarming -Setting level of maximum temperature limit Temperature alarm -Temperature offset is normal or not -Circumstances of temperature -Please reset Adapter upon completing Alarm troubleshooting -Verify that the HPA’s are On RF off -Please Reset Adapter upon completing Alarm troubleshooting When output power is no longer problem 7.4.3 Technician should verify category of -When Red light on the Shutdown LED, technician alarm at the front side should troubleshoot the alarm via Notebook computer of repeater Troubleshooting Guide Related to NMS Symptom Check Points Troubleshooting In case of Ethernet, verify IP addressing, DHCP function, Link Fail Communication problem and that cookies are deleted -verify that a crossover Ethernet cable is being used If technician thinks there is a serious problem, call after sales team for over-the-phone Technical support. 1-913-469-6699. GSTeletech, Inc. 43
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 49 Language : ko-KR Tagged PDF : Yes Author : 고성무 Creator : Microsoft® Word 2013 Create Date : 2017:12:26 16:57:55+09:00 Modify Date : 2017:12:26 16:57:55+09:00 Producer : Microsoft® Word 2013EXIF Metadata provided by EXIF.tools