Download: | |
Mirror Download [FCC.gov] | |
Document ID | 1472342 |
Application ID | kinAP/JD619th3JHHiRCMw== |
Document Description | User manual |
Short Term Confidential | No |
Permanent Confidential | No |
Supercede | No |
Document Type | User Manual |
Display Format | Adobe Acrobat PDF - pdf |
Filesize | 337.83kB (4222895 bits) |
Date Submitted | 2011-05-25 00:00:00 |
Date Available | 2011-07-09 00:00:00 |
Creation Date | 2011-04-19 11:41:00 |
Producing Software | Microsoft® Office PowerPoint® 2007 |
Document Lastmod | 2011-05-25 15:47:03 |
Document Title | 슬ë¼ì´ë“œ 1 |
Document Creator | Microsoft® Office PowerPoint® 2007 |
Document Author: | SEC |
SpeedCell Repeater
INSTALLATION GUIDE
Ver. 1.0
SpeedCell Repeater
Installation Guide Ver. 1.0
Contents of Box
Contents
Picture
Quantity
SpeedCell Repeater System
PSU Unit
Contents
Picture
Quantity
Ground Cable
6.6ft (2m)
1EA
Power Cord
5.9ft (1.8m)
1EA
Ethernet Cable
6.6ft (2m)
1EA
4.3”(W) x 16.9”(H) x 10.7”(D) , 15 lbs
DFM Unit
2.8”(W) x 16.9”(H) x 10.7”(D), 9.9 lbs
1EA
1900 AMP Unit
3.9”(W) x 16.9”(H) x 10.7”(D), 15.2 lbs
Mounting Bracket
1EA
Lag Screw
1/2” x 2”
4EA
CD which contains
- User Manual
- Installation Guide
1EA
Ground Sems Screw
M4 x 8mm
4EA
1EA
Mounting Sems Screw
M6 x 10mm
8EA
23.2”(W) x 18.5”(H) x 2.75”(D), 23.5 lbs
RF Cable Set
Front RF Cable 2EA, Top RF Cable 4EA,
Reference Cable 3EA
This publication provides instruction for installing the SpeedCell repeaters.
The images for the User Interface in this publication may vary from the repeater’s depending on its S/W
Version.
Copyright
© 2011, GS Teletech, Inc.
All Rights Reserved
Printed in Republic of Korea
Revision History
Date
03/2011
Version
Changes
version 1.0
Certification
UL/FCC: This equipment complies with UL and FCC
Warnings and Hazards
WARNING! ELECTRIC SHOCK
Opening the BDA (bi-directional amplifier) could result in electric shock and may cause severe injury.
WARNING! EXPOSURE TO RF
Working with the repeater while in operation, may expose the technician to RF electromagnetic fields
that exceed FCC rules for human exposure. Visit the FCC website at http://www.fcc.gov/oet/rfsafety
to learn more about the effects of exposure to RF electromagnetic fields.
WARNING! DAMAGE TO EQUIPMENT
Operating the BDA with antennas in very close proximity facing each other could lead to severe damage to the repeater.
RF EXPOSURE & ANTENNA PLACEMENT
Actual separation distance is determined upon gain of antenna used.
Please maintain a minimum safe distance of at least 8inch while operating near the donor and the server antennas. Also,
the donor antenna needs to be mounted outdoors on a permanent structure.
WARRANTY
Opening or tampering the BDA will void all warranties.
CAUTION: REPEATER SHOULD BE INSTALLED AS CLOSE AS POSSIBLE TO POWER SOURCE.
CAUTION: THIS REPEATER IS FOR INDOOR USE ONLY AND SHOULD BE LOCATED INSIDE OF BUILDING.
CAUTION: RISK OF EXPLOSION IF BATTERY ON CONTROLLER BOARD IS REPLACED WITH AN INCORRECT TYPE.
CAUTION: DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Mounting Repeater
Wood-Framed Wall
• It is recommended to first attach a sheet of plywood to the wall. The sheet of plywood should be anchored to the studs in the wall.
• Using a pencil, mark the location for each of the mounting bracket's four mounting holes on the plywood.
• Place the mounting bracket over the four lag screws heads.
• Thread a lag screw at the positions marked in step 2.
Wood-Framed Wall
Lag Screw
1/2” x 2”