GUANGZHOU FLYAUDIO CAR AUDIO 76228H01B9 Car Navigation User Manual

GUANGZHOU FLYAUDIO CAR AUDIO CO.,LIMITED Car Navigation

user manual

V1.2Before using the system, please carefully read this manual and properly keep for future reference. User ManualTo prevent accident, don’t watch video during driving.Vehicle Infotainment System 76228H01B9Ford Figo
STATEMENT This manual mainly introduces the function, purpose and operating method, etc. of the vehicle infotainment system;This manual is only used as a user operating guide, not as a basis for maintenance services; Due to continuous improvement of the product, the design and specifications are subject to changes without further notice; The information provided in this manual can be modified without statement, we reserve the final interpretation right of it; Pictures used in this manual are for reference only, we will not assume any liability for any wrong understanding; The actual product shall prevail. For details, please consult relevant dealers; Brand name such as product name, etc. is the trademark or registered trademark owned by each company. FCC STATEMENT:This equipment has been tested and found to comply with the limits for a Class Bdigital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference ina residential installation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, may causeharmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try tocorrect the interference by one or more of the following measures: —Reorient or relocatethe receiving antenna. —Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.—Consult the dealer or an experienced radio/TV technician for help.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator &your body.FCC NOTICE:This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference; and (2) this device must accept any interferencereceived, including interference that may cause undesired operation.FCC CAUTIONCaution the user that changes or modifications not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment.
11223555666777777888991010101010101011117799111111111111111112Before using the systemImportant safety informationSafety statement Ensure safe driving Other safety information Preparations before use Method to power on and power offNavigationIntroductionTips for Reading ManualQuick StartPart 1: Getting StartedTouch GesturesThe Map ViewCurrent Location Finder ButtonCurrent Location IconSettings ButtonSearch ButtonPart 2: Using Search OptionSearching a PlaceSelecting a Place on MapeLocPOI CategoriesBookmark IconHomeMy PlacesFord DealersFord ServiceFind Nearby POINavigationStart Point IconDestination IconRoute details windowOverviewAlong RouteEndRoute StopsAdd a New Route StopRemoving a Route StopDirectionsPart 3: SettingsVoiceDistance and TimeMap AppearanceDriver AssistsSpeed AlertsTraffic SignsCatalogue
[operationUSB] instruction MP3 playing MP4 playing [operationiPod/iPhone] [Bluetooth] flow chart [[Radio] Phone] operation flow chart Phone] instruction[operation Radio] instruction[operation Sound] [Clock] [operation flow chart Sound] [operation instruction Clock][ operation instruction Display][ operation flow chart2731363738382527272930303033343536 [USB] operation flow chart iPod ] instruction[/iPhone operation [Bluetooth] instructionoperation [operationAUX] instruction Display] [ operation instruction prompt page3940 [General][Info] operation flow chart [General] operation instructionFunction and media operation Schematic diagram of the front panel Function description of the front panel components Function description of control keys on steering wheel212223POI Along the RouteSignpostsJunction ViewsRoute SettingsAvoid on RouteReset to DefaultAboutMap InfoGPS InfoEnd User License AgreementDisclaimerAppendix11212121212121212131413154040 Standby interface Info] [ operation instruction
AppendixThe proper operation of touch screen Attentions About LCD screen About TFT About maintenance 4242424242In case of any failure Common issuesSpecifications UniversalGPSPower amplifier and audio components 4343454545FM tuner components AM tuner components Environmental protection454546Phone Bluetooth compatibility list 47
Before using the systemImportant safety informationBefore using the system, be sure to carefully read and understand the following safety information, and put this manual in car, as the reference for operating procedures and safety information. WarningDo not install or repair your infotainment system by yourself. If the personnel not trained on electronic devices and auto parts install or repair the system, it may lead to electric shock or other dangers; Relevant national laws and regulations provide that no driver shall watch video or operate infotainment system during driving, in order to protect your and others’ life safety, please do not watch video or operate infotainment system during driving; Someone else shall not use the system, unless they have read and understood the operating instruction manual; Do not use the infotainment system in an emergency of driving to hospital, police station or similar institutions; Please pay special attention to all the matters needing attention in this manual, and strictly comply with the operating instructions; The infotainment system shall not be exposed to any liquid material, otherwise it will lead to electric shock, and may cause damage, overheating and smoking, etc. of the infotainment system. Safety statementThe navigation function (as well as the optional backing camera function) of the infotainment system is only an auxiliary tool when you drive, it doesn't mean that you can be distracted, careless and even lose judgment when driving. For the resulting safety accident, we do not assume any legal liability; The route and navigation information displayed on the system is for reference only and may not be able to reflect exactly the new and approved routes, road situations, one-way streets, road closures or traffic restrictions; Currently implemented traffic restrictions and traffic suggestions must have precedence over the information provided by the infotainment system. Therefore, please be sure to comply with current traffic restrictions, even when the navigation system provides opposite traffic suggestions; The map data stored in TF card belong to the intellectual property of map supplier, and the map supplier shall be responsible for such contents. Attentions Do not install the infotainment system in case of any one of the following circumstances: It may obstruct the driver's line of sight; It may affect vehicle operating system or safety performance, including air bag, danger alarm lamp button, etc. If you fail to input accurate place name, it may result in that the infotainment system provides improper route and navigation instructions; This product shall not be exposed to moisture; If the battery is power off or discharges electricity, it will cause the system memory to be cleared, and the system must be reprogrammed. Warning
Before using the systemEnsure safe drivingBe sure to abide by safe driving rules and current traffic regulations; If the operation of the navigation system (and the optional backing camera function) will distract you from safe driving, please do not operate; If you want to watch the display screen for system operation, please park the car in a safe place and brake, and then operate the system; Do not set the volume of the navigation system to be too high, otherwise you can't hear the traffic situations and emergency rescue signals outside the car;For safety, when driving, you will be unable to operate some functions of the system. Unless you stop the car or brake to standstill; Please bear in mind that fasten your seat belt when driving, otherwise in case of any traffic accident, it will cause grievous injury to you; Do not wear earphones when driving; In order to prevent traffic accident and avoid possible violation of applicable laws, during driving, please do not use the system for any other purpose other than navigation;In some areas, drivers or passengers inside the vehicle watching the images on the display screen may be illegal. Please comply with these regulations when applicable; This system can detect whether the stopping brake of the vehicle is in service, and it will prevent you watching the images on the display screen during driving; During vehicle running, you will be unable to operate some menu of the navigation system and some media functions. If you want to watch the images on the front display screen, please park the car in a safe place and brake. In order to avoid the battery exhaustion, please ensure to start the engine when using this system, otherwise the use of this system may lead to battery exhaustion; If this product can not work normally, please consult the manufacturer’s customer service department. The right of final interpretation for the product manual is owned by the manufacturer.Other safety information
Preparations before use Method to power on and power offAdjust the ACC of the vehicle to ON or start the engine, the power supply of the system will be automatically turned on and the system will be started, after a few seconds, the following prompt box will appear: After a few seconds, it will automatically enter the interface at last shutdown, adjust ACC to OFF or shut down the engine, the power supply will be turned off. The system automatically saves current media page, and it will enter the media page at next starting.For safety, the system is designed in the following way: no destination setting or other complex operations can be conducted during driving; Please operate after parking the vehicle in a safe location and braking, the driver shall never operate during driving. Note: When the vehicle speed is more than 8Km/h, safety tips will pop up; when the vehicle speed is less than 8Km/h, the tips will disappear automatically.The Infotainment System does not support India languages.WarningBefore using the system
NavigationNavigation
5IntroductionNavigationThe navigation system will make your journey to your destination hassle free. It will guide you throughout your journey with audio and visualguidance.This manual will explain the nitty gritty of all the features available in your navigation system. It will guide you to make the best use of thenavigation system according to your requirement. So, let's get started!Tips for Reading ManualTake me to Destination, End the Route? Yes. You’ll see sentences like these in the Part 2 of the User Manual. This shortened formulationrepresents much lengthier instructions that tell you to open multiple nested screens in sequence, i.e., “Tap the Start button. On the following screen, tap End."1. Tap Search button on map screen.2. Enter your address in the Search or Address field.3. As you type, the search results are displayed simultaneously. Tap on OK to complete the search and hide the keyboard.4. Tap on the desired result. This action will create the route to the destination.5. Tap Start and you will be automatically guided from your present GPS location to your selected destination.Quick StartSimple Search and NavigationYou’ve now started the navigation and want to get to a certain address.Here’s a quick, super-basic way to start navigating immediately.Finding and Navigating to a Destination12345
Search SettingsMap Zoom InCurrent Location FinderCurrent Time6NavigationPart 1: Getting StartedWhat the Heck Do All These Icons, Buttons and Fields Mean?At this point you’ve probably already opened the app, eagerly tapped several buttons and are now staring blankly at a bunch of unfamiliaricons. Relax! This is the part where we show you what all the nifty little buttons, icons, bars and fields mean. We’ll also go through and define some basic terminology (with pictures) to make things easier to understand.Touch GesturesUsing Touch Gestures in Map ViewUse your fingers to control the map, icons and page views in the app.Selecting an Item: Tap the screen surface once with a fingertip to select a button on the Control Bar, a map icon, etc.Panning the Map: Move or quickly brush your fingertip across the screen surface to pan across the map.Zooming In/Out: Pinch or spread your fingers on the screen to zoom in or out of the map.TapDragScrolling a Page: Move or quickly brush your fingertip up and down the screen surface to scroll up and down a page. Or you can use up and down buttons at the bottom of the screen to scroll a page.The Map ViewThis is the first screen you’ll see once you press navi button on the device panel.System will let you know where your are at and you will see your location once the GPS is fixed. This is the navigation's default start screen and it’s called Map View.Map Zoom OutPinchScroll
7NavigationCurrent Location Finder Button :If you are unable to see your current position on map, just tap once on map screen to bring out all the hidden buttons. Then tap on arrow head button at the bottom of the screen.This will instantly bring your current location in map vew. This button also helps you to togglebetween 2D-North Up and 3D-Heads Up view.Current Location Icon :This icon represents the user’s current location when the device is getting a proper GPS signal.Settings Button :Tap Settings button to access various options under the setting menu like Language, Voice, Distance and time units, Map Appearance etc. Return to the Map by tapping on the back buttongiven on the top left corner of the screen.Search Button :Tap on Search button to open the search window.Searching a Place: Type the name, street, address, POI, eLoc or longitude/latitude coordinates in the “Search or Address” field using the keyboard. Selecting a Place on Map: Long Press on the location you want to select on map.eLoc : eLoc is a 6 character digital address that uniquely identifies any place and is linked to various attributes like floor number, door number, etc. Think of an eLoc as the pincode to your doorstep, or a precise digital address of any place, building, etc. User can also use eLoc for finding the particular address. (For more information on eLoc please visit - www.mapmyindia.com/eLoc)Part 2: Using Search Option
8NavigationAs you start typing a place name in the search box, application will start to suggest related results.POI Categories:User can search for nearest POI by tapping on the various POI categories provided under the search screen.1. Assume you want to search for the nearest parking location.2. Tap (icon) of the parking category.3. List of parking areas will be displayed on the screen.4. Tapping on any one of them will give user an option to start navigation to that location.Back button : Back button takes user tothe previous screen.Close button : This button closes thecurrent screen and brings user to the mainPOI categories screen.Bookmark Icon : User can save a destination as a Home or to My Places by tapping on the bookmark button. This bookmark icon will bevisible when desired search result is tapped.Home : User can save a place as home by tapping on the Set as home button. The place will appear under the search screen on the top & user can start navigation to this destination just by tapping on it.
9NavigationFord Service : User can get list of nearby Ford service stations by simply tapping on the Ford Service option under the search screen.Find Nearby POI : Through this option, you may also search POIs available near your current location either by searching via name or by tapping any category. NaviMaps will show any POI falling in that category near the user's current location: e.g. to see the fuel stations, you need to click on fuel stations icon. If the category icon is not listed in shortcuts, then click button which will show all the categories available in the application."My Places: User can add various locations to My Places by tapping on the "Save to My Places" button on the above mentioned screen. My Places can be accessed through the search screen and shows the list of all the saved places.User can remove any place from the list by just swiping the saved place from right to left. This will let two buttons to appear against the selected place...Tapping on ( ) button will give user an option to start the navigation to that location.Tapping on ( ) button will remove that place from the My Places list.Ford Dealers : User can get list of nearby Ford dealers by simply tapping on the Ford dealer’s option under the search screen.
10NavigationTapping on a search result will bring out the map screen with the possible route to that location along with details of the whole route like distance, Estimated Time of Arrival & time for the journey and a Start Button.Start: Instantly begins guiding you to the selected location from your current GPS location.1.) Start Point Icon [ ]: The Start Point icon represents your trip starting point in Map View.2.) Destination Icon [ ]: The Destination icon represents your trip destination in Map View. Destination is shown by the maximum number on the route inside a circle.Route details window: Tap anywhere on the map screen to expand the route detail screen on the left side of the map screen. Here you canaccess more options related to the route.Total Distance to Destination: Active route estimated travel distance.Total Duration to Destination: Active route estimated travel time.ETA: Estimated Time of Arrival to the destination.User can control the navigation application’s voice prompts volume level (Mute, Increase, Decrease) from these available options.Overview: Tapping on the overview button will display the small window with options; Along Route, End buttons & detail about the route.Along Route: Through this option, you can view two of the most important POI categories: Fuel Stations & Parking Places. On the opened screen you can also filter among the listed POIs for anypreferred option you might like.End: Cancels existing route.Navigation 12Route Stops Directions
11NavigationRoute Stops: Shows the order of Star Point, Via Points and Destination of the current route. User can change the order of the via points & destinations by simply tapping on the up and down arrow buttons given along each destination.Add a New Route Stop: To add a route stop on the current route, search for desired stop by first tapping on search button on top & search any place select ‘Add Destination’ option. Application will now create a new route. Now go to Route Route Stops. Here you canchange the order of the Via Points and Destination.Removing a Route Stop: To remove a route stop, user must have 2 or more stops already in the route. Tap on the stop user wants toremove. A window will open with the Remove button at the bottom of it. Tap on the remove button & stop will be removed. Since at-least one point is mandatory, thus start point cannot be removed.Directions: Here you can view your route directions as a list of turn-by turn textual descriptions with corresponding descriptive icons in sequence, by tapping on the Directions button on top right side of the map screen.Here you can customize your application use according to your requirement.Voice: Here you can select guidance voice (including 10 regional voices) according to your choice and use it during navigation .Distance and Time: Here you can choose distance unit and time format.Map Appearance: Here you can choose out of the three options, how map should be displayed like day mode, night mode or automatic as per the time.Driver Assists: Speed Alerts: You can enable/disable the speed alerts here, which comes during navigation when you cross the current road limit.(i)Part 3: Settings
12Navigation((ii) Traffic Signs: Traffic signs, including mandatory, cautionary and informational signs are displayed for enhanced driver assistance and to help user’s abide by traffic regulations. For details, see Appendix 1.(iii) POI Along the Route: You can enable/disable the POIs which appear on map during live navigation. These POI can also be used as pass through on a live route.(iv) Signposts: Sign-As-Real Displays or Overhead signs indicating directions to areas are now displayed prominently within NaviMaps to offer better guidance to the users.v) Junction Views: A realistic representation of an upcoming intersection or junction on the route, presented alongside the map in a splitscreen view that increases user’s situational awareness.Route Settings:Avoid On Route: The Avoid option lets you choose one, several or all avoidance options: Highways, Toll Roads, Narrow Roads and Ferries.Reset To Defaults: Tapping on this option will reset the changes made in the application settings to default.About: The About page displays Map Info., GPS information, Application Version, Serial Number, Disclaimer, Privacy Policy and Copyright Information.Map Info: Under map info user can view the list of all the states.
13NavigationGPS Info: The GPS screen displays a compass, along with the latitude & longitude of your current location. User can also see the accuracy of the GPS in meters and with how many satellitesyour system is currently connected.This End-User License Agreement (EULA) is a legal agreement between you (either an individual or a single entity) and CE INFO SYSTEMS PVT. LTD. for the digital maps database and updates hereof that run navigation in associated hardware collectively the "MapmyIndia Maps” or “Maps"). By installing or using the MapmyIndia Maps, you agree to be bound by the terms of this Agreement. Use of the Maps without acceptance of this Agreement is unauthorized and not permitted.1. License Grant. CE INFO SYSTEMS PVT. LTD. grants you a nonexclusive license to use your purchased copy of the MapmyIndia Maps for your own purposes of accessing the map database and navigation by running the associated hardware and not for service bureau timesharing, or other similar purposes.2. Limitations On Use. You are not permitted to copy, modify, decompile, disassemble, or reverse engineer any portion of the Maps.3. Indemnity. You agree to indemnify, defend and hold free and harmless CE INFO SYSTEMS PVT. LTD., including its licensors, assignees, subsidiaries, affiliated companies, and the respective officers, directors, employees, shareholders, agents, authorized dealers or sales agents, and repre-sentatives of each of them from and against any liability, loss, injury, demand, cost, expense, or claim of any kind of character, including but not limited to attorney's fees, arising out of (a) any use or possession of the Maps, or (b) any breach of any warranties or representations made by you in this Agreement or of your obligations under this Agreement.4. Disclaimer of Warranty. CE INFO SYSTEMS PVT. LTD. does not make any warranties or representations, either express or implied, withrespect to the Maps, without limiting the foregoing, CE INFO SYSTEMS PVT. LTD. expressly disclaims any implied warranties of quality, performance, merchantability, fitness for a particular purpose or noninfringement.5. Limitation of Liability. CE INFO SYSTEMS PVT. LTD. shall not be held responsible for any actual, anticipated or speculative loss of profit or direct, indirect, incidental, special, or consequential damages, including, without limitation, loss of revenue, data, or use incurred by you or any third party arising out of your use or possession of the Maps, whether in an action in contract or tort or based on a warranty, even if CE INFO SYSTEMS PVT. LTD. has been advised of the possibility of such damages.MapmyIndia Maps End User License Agreement
14Navigation6. Warnings.A. Copies of the Maps reflect conditions as they existed at various points in time before your receipt of such copies. Accordingly, copies of the Maps may contain inaccurate or incomplete data or information due to inaccurate or incomplete source materials, the passage of time, road construction, changing conditions, and otherwise.B. Neither the Maps nor the Software include, analyze, process, consider or reflect any of the following categories of information, i.e.,neighborhood quality or safety; population density; availability or proximity of law enforcement, emergency, rescue, medical or other assistance; construction work, zones, or hazards; road and lane closures; various legal restrictions (such as vehicular type, weight, load, height and speed restrictions); road slope or grade; bridge height, width, weight or other limits; road, traffic or traffic facilities safety or conditions; weather conditions; pavement characteristics orconditions; special events; traffic congestion; or travel time.C. Maps are strictly meant for use in India and you are not allowed to export Maps or its copies anywhere outside India.7. Transfer. This Agreement, including all rights, obligations and representations may be transferred to another individual or single entity,provided the same transfer includes the simultaneous transfer of the associated hardware in which the Maps are installed, and furtherprovided that such other individual or single entity accepts all the terms of this Agreement. In the event such individual or single entity to which the Software is transferred does not accept the terms of this agreement, then the License herein automatically terminates. Further use of the Maps is unauthorized and not permitted.8. Governing Law. This Agreement shall be governed by the laws of India without giving effect to its conflict of laws provisions.CE INFO SYSTEMS PVT. LTD. Copyright Notice – MapmyIndia Maps Copyright© 2018CE INFO SYSTEMS PVT. LTD.All rights reserved. This document and the maps described in it are furnished under license and may be used only in accordance with such license. Information in this document is subject to change without notice and does not represent a commitment on the part of CE Info SystemsPvt. Ltd.MapmyIndia reserves all rights concerning the information contained herein. This document or any part thereof may not be reproduced, distributed, or translated into other languages in any way or form except with the written approval of MapmyIndia. This document is provided to the user on an ‘as is’ basis. Although maximum care was taken duringpreparation of this manual to provide accurate information and to avoid errors, some technical inaccuracies or editorial errors may occur, forwhich MapmyIndia accepts no responsibility. In the interest of improving the content of the document, MapmyIndia reserves the right to modify, amend or delete any part of the document at any time without prior notice.This is a generic version of the user manual. Some of the features listed here may vary on your device . In case of confusion, please contact us:237 - Okhla Industrial Estate, Phase 3, New Delhi - 110020Ph: +91-11 4600 9900, +91-9999333223Email: support@mapmyindia.comWeb: www.mapmyindia.comDisclaimer
APPENDIX 1 APPENDIX 1Types of Traffic Signs15
Icon Description2 Meter Width3.5 Meter HeightAhead OnlyAxle Weight LimitBarrier AheadBullock Cart and Hand Cart ProhibitedBullock Cart ProhibitedCar & Taxi ParkingCattle ProhibitedCompulsory Straight or Turn LeftCompulsory Straight or Turn RightCompulsory Cycle TrackCompulsory Keep LeftCompulsory Turn RightIcon DescriptionCross RoadCycle CrossingCycle ParkingEating PlaceFalling RocksFerry AheadFirst Aid PostGap in MedianGuarded AheadHand Cart ProhibitedHorn ProhibitedHospitalHorn CompulsoryHospital AheadAPPENDIX 116
Icon DescriptionSide Road RightSlippery RoadStaggered intersectionsStaggered intersectionsSteep AscendSteep DescendStopT JunctionTonga ProhibitedTurn RightY Inter Section LeftY Inter SectionU Turn ProhibitedY Inter Section RightIcon DescriptionHTV ProhibitedKeep LeftLeft Hair Pin BendLeft Hand CurveLeft Reverse BendLeft Turn ProhibitedLength LimitLight RefreshmentLoose GravelMen at WorkNarrow BridgeT Intersection AheadNarrow Bridge AheadTraffic Light Ahead17APPENDIX 1
Icon Description2.5 Meter HeightAccident ZoneGive WayGo SlowNo Free Left TurnSpeed BreakerU Turn Allow5.5 Meter HeightBus ProhibitedCautionFoot Over BridgeCycle ProhibitedLeft Turn AheadNarrow Road AheadIcon DescriptionNarrow Road AheadNo EntryNo ParkingNo Stopping and No ParkingNo Thorough RoadNo Thorough Side RoadOne WayOne WayOvertaking ProhibitedParking Both SidePedestrian CrossingParking On The Right SidePedestrians ProhibitedPetrol PumpProhibited Both Side18APPENDIX 1
Icon DescriptionProhibited VehiclesPublic TelephoneRailway Station AheadResting PlaceRight Hand Pin BendRight Hand CurveRight Reverse BendRight Turn ProhibitedRoad ClosedRoad Widens AheadRound About AheadRough RoadSchool AheadScooter and Motor Cycle ParkingSide Road LeftIcon DescriptionOver Take Always RightRoad Turn AheadRoad with Service LaneTowing ZoneLeft Road Merging AheadRight Curve AheadBus & Truck Not AllowedT Point AheadCurve RoadZigzag RoadTwo way RoadDanger ZoneJunction AheadLeft Hand Curve5 Meter Height19APPENDIX 1
Icon DescriptionMerging Left Side2.40 Meter HeightHigh Tension Wires AheadTunnel AheadCycle Rickshaw ProhibitedDivide Two SideSpeed CameraLeft U Turn ProhibitedRight Road Merging Ahead20APPENDIX 1
Schematic diagram of the front panelResetTouch screen Standby\restart\volume control knob Main menu shortcut keyMUTE key Navigation function shortcut key Screen on / Screen offBluetooth phone key Multimedia switch key Radio frequency scanRadio function shortcut key FM \previous\next song\sound\navigation control knobThis picture is for reference only, the actual product appearance shall prevail!Note7.0 inch touch screen 21Function description and media operationSeek/Rewind keySeek/Fast forward key
Function description of the front panel componentsTouch screen Display different images, click on the control menu in the images to select the control items.Standby\ volume control knob1. Adjust the volume outputted from the machine; turn it clockwise, the volume will increase, turn it counterclockwise, the volume will decrease; 2. Press the knob, the display screen will enter standby interface; Press again to cancel standby and return to current interface. 3. Press and hold for more than 5 seconds, infotainment system will restart.Main menu shortcut key【 】 Except at the backing, Bluetooth phone and standby status, pressing this key at any other pages can quickly switch to the main menu interface. Mute key【 】 Press the knob to open/cancel mute. 【 】 At the status of multimedia playing, press this key to select the next song, press and hold this key to skip forward; at the status of listening to radio, press this key to automatically search next frequency channel with signal, press and hold this key , until release, it will stay in a frequency channel with signal. In Bluetooth music interface, press this key to enter next song,press and hold has no function. 【 】 At the status of multimedia playing, press this key to select previous song, press and hold this key to skip backward; at the status of listening to radio, press this key to automatically search previous frequency channel with signal, press and hold this key , until release, it will stay in a frequency channel with signal. Navigation function shortcut key 【 】 Enter GPS navigation screen shortcut key, press this key to quickly switch to GPS navigation map interface.Screen on / Screen off Click to turn off the screen, and click again to turn it on. restart\ 【 】 Seek/Fast forward keyto skip forwardSeek/Rewind keyto skip backwardIn Bluetooth music interface, press this key to enter previous song, press and hold has no function.【 】Bluetooth phone key【 】 Press this button to enter the bluetooth phone interface, you must first confirm the infotainment system and mobile phone bluetooth connected before operating the bluetooth phone related functions.Multimedia switch key【 】 Press this button to switch to the USB-iPod /iphone-BT-AUX interface in sequence. If you jump from the Media to another page, press this button to switch to the last media playback screen.Radio frequency scan key 【SCAN】 At the status of radio interface, press this key to automatically scan radio frequency.Radio function shortcut key 【 】 Enter radio screen shortcut key, press this key to switch to radio operation interface.FM \previous\next song\sound\navigation control knob1. When listening to the radio, turn the knob for FM of radio channel; 2. Enter GPS navigation interface, this knob can adjust the minification and magnification of map; 3. Press this knob vertically to quickly enter sound setting interface; 4. At the status of multimedia playing, turn the knob clockwise to enter the next song, turn the knob counterclockwise to enter previous song.Reset system will restart. 【TUNE】 Infotainment22Function description and media operation
Function description of control keys on steering wheel【 】： seeking available station. In MP3, ipod, video and other interfaces, press this key to enter previous song, press and hold this key to skip backward; in Bluetooth music interface, press this key to enter previous song, press and hold has no function; at the status of being called, press this key to answer the phone; 【 】： available station. In MP3, ipod, video and other interfaces, press this key to enter next song, press and hold this key to skip forward; in Bluetooth music interface, press this key to enter next song, at the status of being called or answering the phone, press this key to reject or hang off;【 +】：This key is used to increase the volume; press for volume +1, press and hold to quickly increase volume;【 -】：This key is used to decrease the volume; press for volume -1, press and hold to quickly decrease volume;【M】：This key is for media function.In radio interface, single press this key to previous stored station, long press this key for In radio interface, single press this key to next stored station, long press this key for seeking press and hold has no function; 23Function description and media operation
24Function description and media operation
[USB] operation flow chartMain menu AudioSourcesUSB MP3USB MP4FolderFolder25Function description and media operation
26Function description and media operation
MP4 player TRACK 1/10 Serial number of the track that is being played. 02:30 Show the time for which the USB drive has been played. Under the condition that USB drive has been inserted, pressing this key to start playing, at the status of playing, press this key to pause. Press this key during pause or stop to return to normal playing. Press this key to play previous track or song, press and hold this key to skip backward. Press this key to play next track or song, press and hold this key to skip forward.Mute Press this key to enter the mute mode. Image Press this key to enter the video images and operation menu interface. As shown below: Adjust the color, contrast, tone and brightness of video image. As shown below:[ ]：[ ]：[ ]：[ ]：[ ]：[ ]：[ ]：[Full]: Press this key to display full screen video interface. Press [Full] key again, the screen will display normal video interface. (Note: Associated with relevant format of videos in USB drive) [ Set ]：MP3 playing Click [USB] in [Sources] to enter the operation interface of MP3 in USB drive, as shown below: ：Press this key to play previous song, press and hold this key to skip backward. ：Press this key to start playing, at the status of playing, press this key to pause. Press this key during pause or stop to return to normal playing. ：Press this key to play next song, press and hold this key to skip forward. ：Press this key to enter the mute mode, press again to return to the original volume. RPT-One ：Automatically and repeatedly play the track or song that is being played. Shuffle ：Randomly play the audio or video files in USB drive. Note: Under the condition of not selecting [RPT- One] or [Shuffle], the system default will be automatic list playing cycle. Folder ：Browsed playing of the audio or video files in USB drive. 1. Android device does not support music paying via USB cable. 2. For iPod/iPhone music playback, please refer to [iPod/iPhone] function.[][][][Mute][][][] [USB] operation instruction Note27Function description and media operation
Press the [Folder], the image is as shown below: Program browse: Press [ ] [ ] on the touch screen to browse the file folder list or file list. Upper Press this key to return to the upper interface. Press this key to return to [USB] operation interface. [ ]：[ ]：[All Videos]/[All Songs]：Press [All Videos]/ [All Songs] to view all the video/audio files in USB drive, and select the favored media file to play.[Folder]：Press [Folder] to browse all folder paths into USB drive, and find the position of favored video/audio files, and select the media files to play. Note: If encrypted USB drive is used, it can not be read normally. As shown below: The infotainment system can read only the USB drive supporting FAT32 format. NoteFile formatAudioAACMP2MP3FLACAPEM4ARAAVIMP4MPGRMVBThe vehicle infotainment system supports the following audio and video formats as well as coding and decoding formats:File formatVideoCoding and decoding formatsAACMPEGMPEGFLACMonKEYAACCookerXVIDXVIDMPEG2RealvideoMP3AC3\MP2AACMPEGCookerRAACVideo coding and decoding formatsAudio coding and decoding formats28Function description and media operationNote
iPod/iPhone[ flowiPod/iPhone] [Bluetooth] operation chart: BluetoothSources AudioMain menu Folder29Function description and media operation
Click [iPod/iPhone] in [Sources] to enter the ipod/iphone interface as shown below:Press this key to play previous song, press and hold this key to skip backward. Press this key to start playing, at the status of playing, press this key to pause. Press this key during pause or stop to return to normal playing. Press this key to play next song, press and hold this key to skip forward. Press this key to enter the mute mode, press again to return to the original volume. Press this key to enter the list cycle playing. Randomly play the MP3 songs in iPod. Note: If none of [RPT-One] [RPT] [Shuffle] are selected, the system is defaulted to automatic list play cycle. Browsed playing of the MP3 songs in iPod/iPhone.Press the [folder] to enter the following image: 1. Please connect iOS devices to head unit by USB port before using this function. 2. Android devices does not support this function. [ ]：[ ]：[ ]：[ Mute ]：[RPT-One]：Automatically and repeatedly play the track or song that is being played. [ RPT ]：[ Shuffle ]：[ Folder ]：Click [Bluetooth] in the [Sources] to enter Bluetooth music interface, as shown below:Press this key to play previous song.Under the condition of connected to mobile phone, press this key to start playing. At the status of playing, press this key to pause.Press this key to play next song.[ ]：[ ]：[ ]：[ ]：[RPT-One]：Automatically and repeatedly play the track or song that is being played. [ Shuffle ]：Randomly play the MP3 songs in mobile phone. Note: 1. Please note shuffle and repeat functions may not work properly due to different Apps and mobile phones2. After a Android phone or iPhone is connected to the BT of Infotainment System, open the Map in the phone to navigate. Only the System is switched to BT interface, can the navigation voice broadcast be heared.3. After the mobile phone is connected to Bluetooth and when the head unit is playing Bluetooth music, pull out and insert USB data charging line: a. iPhone Bluetooth music will pause, the users need to manually click on the key to continue to play. b. Android phone Bluetooth music will pause for 2 seconds, and then continue to play automatically.4. Music information may display inconsistence on phone & head unit due to APP / phone compatibility. Click [AUX] in [Sources] to enter the auxiliary input interface. (Some models have no this function, the actual product shall prevail) AUX has nothing connected to the operation funtion except audio output only. [iPod/iPhone] Operation instruction [Bluetooth] operation instruction[AUX] operation instruction30Function description and media operationNoteNote
[Phone] [Radio] operation flow chartMain menu Phone31Function description and media operation
Radio32Function description and media operation
[]Phone operation instructionClick the [Phone] in the main menu, the interface is shown as below:[Pair]: Click on this key to enter the Bluetooth device pair page, this function will be described below in detail. [Handsfree]: Switch to navigation system call status. [Privacy]: Switch to phone answering. [ Dial]: Make a phone call. The calling interface shown as below:duration [ ]: Delete the wrong number.[Contacts]: Click on this key, the image is as shown below: [Missed]: List of missed calls. [Received]: List of received calls. [Placed]: List of dialed numbers. [Contacts] Contacts stored in mobile phone. (the device should support it) [ ] And [ ] view recent calls.[ ] Press this key to return to [Phone] operation interface. [Search] Click the search box at the top of the page to enter the Contacts for searching contacts, as shown below:[04:09]: Current Calling . : : : : In the search box, input related letters of contact name, related contact information will pop up. Then click on the “ ” key on the keypad, the keypad will be hidden. As shown below: [Pair] operation instruction Click [Pair] in the [Phone] interface to enterthe Bluetooth page, as shown below: There are two methods for mobile phone pairing1. Find out the corresponding device name of the navigation system in the phone Bluetooth, click it and input the pairing password to pair;2. Click the "Paired devices" in the prompt box to enter the device list page, select the previously connected phones to connect. 33Function description and media operation
Click the phone name in the device list to enter the device connection setting, you can select "Primary device", "Connect", "Delete" and other setting options. After the "Pair" is well fulfilled, click "Pair" key again, then click "OK" in the prompt box to disconnect current device:Select frequencyClick "Scan" to automatically search, scan and save the radio stations[Manual Search]In the radio interface, press button " " or " " on the physical panel to select the desired radio stations.Click the relevant icons on the screen to switch between FM and AM.There are 10 blank cells provided to store frequently used stations in each mode, which provides a shortcut to enter them. Follow the steps below to change or reset stations in the cells.1. Search the desired radio stations. 2. Select one cell, touch and hold it for 2 seconds, the desired radio station will be in the cell with its frequency shows on.[98.00MHz]: The frequency of the radio being played. [FM1/FM2]: Press this key to select the stored FM radio. [AM1/AM2]: Press this key to select the stored AM radio. [Mute]: Press this key to enter the mute mode, press again to return to the original volume.Current radio nameRadio Info. In case of power failure due to battery cut off or fuse blowing, the prestored radio stations may be erased. [][BBC News]: .[the day’s top news]: . Auto SearchNoted[] Search radio stationsRadio operation instruction Click on the [Radio] in the main menu to enter the main page of radio. Search the previously received stations. Automatically preset the list display of the radio stored in frequency channel. The received signal will be weak in tunnels, behind mountains, building interspace and other places where the electric waves are easily blocked and the electric waves are weak. Even if the list displays, according to current position and electric wave situations, sometimes it can't receive signal. Noted34Function description and media operationNoted The operating frequency of the Bluetooth module is 2.402-2.480GHz and the transmit power is 2-8dBm
[Sound] [Clock] operation flow chartSettings ClockSound EQMain menu35Function description and media operation
Classical : For classical music, it increases the volume of high and low parts, and mainly highlights the performance of musical instruments.Popular :For popular music, it requires the combination of voice and instrumental music to be equalized, so the fluctuation of curve is not big. Jazz : Jazz originated in the United States in the late 19th century and early 20th century, born in the southern port city New Orleans, and the music foundation comes from Blues and Ragtime. Jazz puts stress on improvisation, based on the Shuffle rhythm with the feature of swing, it is a combination of African black culture and European white culture. Rock : Rock expresses emotion through its flexible and bold manifestation and passionate music rhythm.Reset : Reset all the EQs. [][][][][Custom]: Users adjust the EQ according to their own preference. [][]:Note: After the custom function is set, press and hold this key to save the custom settings.Press [Clock] in the [Settings] to adjust the system time by [ ] [ ], as shown below: Clock format Press the [12 hr] /[2 4hr] keys, set the system time as 12-hour system or 24-hour system. ：Adjust the sound balance between the front and rear speakers. ：Adjust the sound balance between the left and right speakers.Each time you press the [ ] or [ ], [ ] or [ ], the red display bar will move towards corresponding direction for one unit.: Press this key to return to the upper operation interface. Loudness off It is to increase the volume of high and low frequency components at low volume so that the loudness ratio of the low, medium and high parts remains the same as it’s at the high volume. When listening to the disc or broadcast of stereo, changing the left/right balance will increase the volume of one group of sound and meanwhile decrease the volume of the other group of sound. QThe sound effect depends largely on the combined sound level of high and low sounds. In fact, various musical and vocal programs will be more fair-sounding through the combination of high and low sounds of different sound levels. It's also very important to maintain the best balance of the left and right stereo sound channels as well as the front and rear sound levels. As shown below: EIn audio equipment, EQ is a kind of electronic equipment that can adjust the amplification of electrical signals of different frequency components. Through adjusting electrical signals of different frequency, it can compensate the defects of speakers and sound field, compensate and beautify various sound sources, etc. EQ of general sound console can only respectively adjust the electrical signals of high, intermediate and low frequency. [][ ][ ][ ][ ][ ]: [Sound] operation instructionNote[Clock] operation instruction36Function description and media operation
[Display] operation flow chartMain menuSettings Display37Function description and media operation
Press [Display] in the [Settings], as shown below: [][][][]Brightness : When the system is working, users can set the screen to one of the three brightness modes, [Dark] [Mid] or [Bri] according to their own needs.Mode : Click on this key to set the navigation screen to [Day] or [Night] . Auto dim :When it is set to [ON]:[Mode] This function can not be manually set. Only the car headlamps are turned on, also in dark places, can it be switched to the night mode with keypad backlight on and screen darkened, otherwise it is in the day mode with keypad backlight off and screen lightened.When set to [Off]：The day and night mode can only be set manually by clicking the [Mode] on the screen, but can not be controlled by car headlamps and light in surroundings. : Click this key to turn off the screen.[Display] operation instruction38Function description and media operationThere will be a prompt page popped up automaticallywhen doors or trunk is not well closed.Prompt page
[General] [Info] operation flow chartMain menuSettings GeneralInfo39Function description and media operation
Click [General] in [Settings] of the main menu to enter the interface as shown below: [][]When it is set to [On], after 10 seconds since the ending of other screen operation, it will automatically switch from current operation screen to navigation screen. When it is set to [Off], this function will be closed.[][][][] [][] Navi volume level [ ] [ ] Adjust the level of navigation volume by [ ] [ ].[][][]Auto switch to navi On Off Navi voice prompt On Off When it is set to [On], the navigation voice prompt will be turned on. When it is set to [Off], the voice prompt will be turned off.Auto-download contacts On OffAfter bluetooth is connected when [on] is set, infotainment system will automatically download contacts, missed calls, answered calls, dialed calls in cellphone. The function is shut down when [off] is set.Bluetooth connection chime On OffAfter bluetooth is connected when [on] is set, infotainment system will send out a hint.The hint of bluetooth connection is shut down when [off] is set. Continue to click [ ] on the right of [General] to enter the second page of [General] interface, as shown below:Navi Path : Click on the [Path] key to choose the map path. Map update : Click on the [Update] key to update the map. System Update : Click on the [Update] key to choose whether to upgrade the system. Click on [Info] key to display relevant information of MCU, iPod, Barcode, Bluetooth, UUID and Hardware, as shown below:Vertically press the centre of left knob from head unit, the system will enter standby mode, and press again to go back to current interface, shown as above picture.[General] operation instruction[Info] operation instructionStandby interface 40Function description and media operation[][]Continue to click [ ] on the right of [General] to enter the third page of [General] interface, as shown below:System Reset : Click on the [Reset] key to choose whether to reset the system. Press and hold this key to restore factory settings. : Press this key to return to the operation interface of settings.
AppendixAppendix41
42AppendixThe proper operation of touch screen Attentions* Do not place the display screen in direct sunlight or high temperature for a long time, otherwise it may cause screen failure; please use the display screen within the following temperature range: Application temperature range: -10̊C~+50̊C Storage temperature range: -20̊C~+80̊C * Do not press hard on the display screen, otherwise it may cause failure; * For the vehicles equipped with air bags and other safety devices, be careful not to interfere with the work of safety devices. About LCD Screen* Sometimes there will be small dark spot or flare spot (bright spot) on the LCD image of display screen, it is a peculiar phenomenon of LCD screen, not a failure; * When used in cold area, the screen may be dark after power on, after a while, it will restore normal brightness; * It will be difficult to clearly watch the LCD image of display screen due to the reflection of sunshine. About TFT (Thin Film Transistor) About maintenance* use TFT inside the display screen; * The service life of the TFT is about ten thousand hours (when used in cold area, the service life will be shortened), at the end of its service life, the screen will become dark or can not display images, please consult the manufacturer’s service department. In order to ensure the backlight of LCD screen, * When cleaning the dust or dirt from the display screen, please first turn off power supply, then use a soft cloth to wipe gently; * When wiping the display screen, be careful not to scratch the screen by nails; * Do not use wet wiping cloth, volatile oil, diluent, etc. to wipe the display screen; * The display screen shall not be exposed to corrosive materials.
Fail to turn on power supply, it does not work The touch key on the screen is inactive or unresponsive There is small dark spot or bright spot on LCD screen LCD screen is dark There is no soundIt doesn’t display image TroubleThe wires and connectors are not properly connected. Fuse is blown. Due to noise and other factors, the built-in computer is out of order. Confirm again whether it is properly and firmly connected. Find out the cause for blown fuse, please replace with the fuse of the same capacity. There is deviation between the position on the screen and the actual touch position.CausePlease conduct the setting of touch screen calibration. It is a peculiar phenomenon of LCD screen, not a failure. Adjustment of the bright degree is improper. Temperature in the car is low. If the ambient temperature is low, the LCD screen will become dark. Please use heat to increase the temperature in the car. The volume is set to 0. Audio line connection is wrong. No parking brake. Close the display screen. Press the power key or gently click on the screen. Please press the reset button. SolutionAdjust the brightness. Increase the volume. Confirm whether it is wrongly connected. Conduct parking brake. In case of any failureIn case of any failure, before returning the product for repair, please refer to the following table to find the cause. If you can not repair it after checking, please restore factory settings of the machine. If it is still faulted, please consult the manufacturer’s customer service department.Common IssuesIncrease the volume.The image is switched to the navigation system. Correctly adjust and set. Decrease the volume. The image is not switched to the navigation system. The adjustment of increasing or decreasing the volume of the front or rear speaker is improper. The adjustment of increasing or decreasing the volume of the left or right speaker is improper. The volume is low. It doesn’t display the navigation system interface There is no sound from the front or rear speaker There is no sound from the left or right speaker 43Appendix
44AppendixNavigationNavigation system does not work or often loaded into the path of the running navigation interface.Navigation path is not correct. Please press the "Browse" key to set the correct navigation path. The correct path is "\SDMEM\NaviMaps\Arthur.exe", and then tick the "Auto run next time" key, finally, press the "Run Navigation" key for navigation. Trouble Reason SolutionMap card is improperly installed or damaged. The map application has just finished upgrading. First, please restart the car navigation system. If it does work, please reinstall the map card. If both do not work, turn to the manufacturer for help. Note: SD card is not alloweed to insert or withdraw when the head unit is swithed on.
45AppendixSpecifications (Due to continuous improvement of the product, the specifications are subject to changes without further notice)UniversalMaximum current consumption: 10.0A Power supply: DC14.4V (11V~16V can be used)Grounding method: minus earth External image input level: 1Vp~p/75 Maximum input level of external sound: 1.5V/22K Image output level: 1Vp~p/75 (100% output of white)GPSMethod: L1, C/A code GPS SPS standard positioning service Reception mode: 12 channels Receiving frequency: 1575.42MHz Sensitivity: -130dBm Test update time: about 1 time/sPower amplifier and audio componentsRated power output: 48W (12Wx4) Maximum power output: 120W (30Wx4) Load impedance: 4ΩFM tuner componentsWave band of receiving frequency: 87.5 MHz – 108.00 MHzPractical sensitivity: ≤12 dBµVSearch sensitivity: 35 dBµVS/N: more than 50dB (IHF-A network) Harmonic distortion rate: 0.3%Frequency response: ≥ 2KHzStereo separation degree: ≥ 27dBAM tuner componentsWave band of receiving frequency: 522KHz ~ 1620KHz (9 KHz)Practical sensitivity: ≤ 28 dBµV
46Poisonous and harmful substances or elements Part NameMainboard Display screenPlatsticMetalNonmetalData lineAntennaAccessoriesPb Hg Cd Cr6 PBDE PBBEnvironment-friendly use period Table of the name and content of poisonous and harmful substances or elements It indicates that the content of the poisonous and harmful substance in all the homogeneous materials of the part is below the limit specified in GB/26572-2011. It indicates that the content of the poisonous and harmful substance in at least one homogeneous material of the part is within the limit specified in GB/26572-2011. Note: The reason for this product marked with "X": At present, there is no alternative technology or part available. The environment-friendly use period indicated on this product refers to the safe use period during which there is no leakage of poisonous and harmful substances when using this product under the service conditions specified in this information guide.Environmental protection
Phone Bluetooth compatibility listAudio Streaming Phone Pairing Handsfree CallingiPhone 6SiPhone 7iPhone 6S PlusiPhone 7 PlusiPhone 8iPhone 8 PlusiPhone SEiPhone XCaller IDApplePhonebook Download√AsusZenfone Max ZC550KLZenfone 2 Laser ZE550KLZenfone 3 Max ZC520TLZenfone Live ZB501KLZenfone Selfie ZD551KLCoolpadMega 2.5D Y83-100Note 5 3600ICool 1 C103Note 3 LiteGioneeA1 iPhone 6iPhone 5SPhone Bluetooth compatibility list47√√√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √ √√√ √√ √√√ √√ √√√ √√ √√√ √√√√ √√ √√√ √√ √√√√ √Compatible√Not fully compatibleUnsupportedBlank
F103 ProMarathon M5 litePhone Bluetooth compatibility listAudio Streaming Phone Pairing Handsfree CallingP5W P7 Max S6s PixelPixel XL6X BLN-L218 Pro DUK-L09Caller IDGioneePhonebook DownloadHonorHTCDesire 820s Dual SIMInFocusM260Bingo 50 M460EPIC 1IntexAqua Ace Cloud CubeAQUA CRAZECloud 4G StarCloud JewelGooglePhone Bluetooth compatibility list48√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√ √√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√ √√√√√ √√√√ √√√√√ √Compatible√Not fully compatibleUnsupportedBlank
Phone Bluetooth compatibility listAudio Streaming Phone Pairing Handsfree CallingK9 ViraatQuattro L50 HDTitanium K9 SmartTitanium MachFiveTitanium MoghulTITANIUM S2Caller IDKarbonnPhonebook DownloadA72 P7Pixel V2V5X50K6 Power K33A42Moto C Xt1755Vibe P1A2010A6000 PlusA7000 A7000 Turbo K50a40K8 Note XT1902-3Moto E4 Plus Xt1770LavaA77LenovoPhone Bluetooth compatibility list49√√√ √√√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√√ √√ √√√ √√ √√√ √√ √√√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √(Note 3)√√√√ √Compatible√Not fully compatibleUnsupportedBlank
Phone Bluetooth compatibility listAudio Streaming Phone Pairing Handsfree CallingMoto Z Play XT1635-02Vibe K5 A6020a40Vibe K5 Note A7020a48 Vibe K5 PlusA6600 Plus A6600d40 K6 Note K53a48Moto E3 Power Xt1706Caller IDLenovoPhonebook DownloadVibe K4 Note A7010a48Vibe B A2016a40K3 Note K50a40Moto G4 Plus Xt1643Moto M Xt1663Le 1s X507Water 11 LS-5017Canvas 5 E481Canvas 6 Pro E484Canvas Blaze Mt500Canvas Evok E483Canvas Juice 3 Q392Le 2 X526LeTVLYFMicromaxPhone Bluetooth compatibility list50√√√√ √√√√√ √√√√√ √√√√√ √√√ √√√√√ √√√√√ √√√ √√√√√ √√√√√ √√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √Compatible√Not fully compatibleUnsupportedBlank
Phone Bluetooth compatibility listAudio Streaming Phone Pairing Handsfree CallingCanvas Mega 4G Q417Canvas Nitro 2 E311Canvas Xpress 4G Q413 Bolt Selfie Q424Canvas Amaze 2 E457Canvas Fire 5 Q386Caller IDMicromaxPhonebook DownloadCanvas Juice 4G Q461Canvas Juice 2 Aq5001Canvas Xpress 2 E313Canvas Unite 4 Pro Q465Moto X Play Xt15625 A50002 A20033T A3003X E1003A37 A37FA57 CPH1701Canvas Infinity Hs2 Canvas Fire 4G+ Q412Moto G 2nd Generation Xt1068MotorolaOnePlusOppoPhone Bluetooth compatibility list51√√ √√ √√√ √√ √√√ √√ √√√√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√√ √√√ √√ √√√ √√ √Compatible√Not fully compatibleUnsupportedBlank
Phone Bluetooth compatibility listAudio Streaming Phone Pairing Handsfree CallingA71 CPH1717 F1 F1fF1 Plus X9009 F1s A1601F3 CPH1609F3 Plus CPH1613 Caller IDOppoPhonebook DownloadGalaxy J2 (2016) J210F/DSGalaxy J1 J100H/DDNeo 7 A33FGalaxy A7 (2016) A710F/DSGalaxy A8 A800FGalaxy J2 Pro J210F/DSGalaxy J5 (2016) J510FN/DDGalaxy J5 Prime G570F/DDGalaxy J7 (2016) J710FN/DDGalaxy J7 J700F/DDGalaxy J7 Max G615F/DSGalaxy J7 Nxt J701F/DSGalaxy J2 J200G/DDGalaxy J2 Ace G532G/DSGalaxy J3 (2016) J320FGalaxy J5 J500F/DDSamsungPhone Bluetooth compatibility list52√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √Compatible√Not fully compatibleUnsupportedBlank
Phone Bluetooth compatibility listAudio Streaming Phone Pairing Handsfree CallingGalaxy J7 Prime G610F/DDGalaxy J7 Pro J730G/DSGalaxy On Nxt G610F/DDGalaxy On5 G550FY/DSGalaxy On7 G600FYGalaxy On8 J710FN/DSCaller IDSamsungPhonebook DownloadZ1 Z130H/DSZ3 Z300HZ4 Z400F/DSGalaxy A5 (2017) A520F/DSGalaxy C9 Pro C900F/DSGalaxy E7 E700HGalaxy Grand Max G7202/DGalaxy Grand Neo i9060Galaxy Note5 N920GGalaxy S8+ G955FDGalaxy S III I9300Galaxy S6 G920IZ2 Z200F/DSGalaxy A7 A700FDGalaxy S6 Edge G925IGalaxy A7 (2017) A720F/DSGalaxy E5 E500HPhone Bluetooth compatibility list53√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √Compatible√Not fully compatibleUnsupportedBlank
Phone Bluetooth compatibility listAudio Streaming Phone Pairing Handsfree CallingGalaxy S8 G950FDGalaxy Note 4 N910GGalaxy S6 Edge+ G928GGalaxy S7 Edge G935FXperia XZs G8232Caller IDSamsungPhonebook DownloadV5 1601V3 Xperia XA1 G3116Elite Plus Y31LY53 1606Y69 1714V3 Max V5 Plus 1611V7+ 1716Y66 1609Y21LV5s 1713Y51LY55L 1603SonySwipeVivoPhone Bluetooth compatibility list54√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √√√√√ √Compatible√Not fully compatibleUnsupportedBlank
Phone Bluetooth compatibility listAudio Streaming Phone Pairing Handsfree CallingMi 5 Mi MaxMi Max 2RedMi 2 Prime HM 2LTE-IN Redmi 3SRedmi 4ACaller IDXiaomiPhonebook DownloadRedmi Note 4Mi 4iNote PrimeYunicorn Yu5530Redmi Note 3 Mi A1Era 4KYunique Yu4711XoloYUHot 4 Pro X5511InfinixNote 4 X572Note: 1. Flyaudio does not support SIM Contacts for Phonebook Download. 2. Flyaudio does not support SMS or Text Messaging functions. 3. Karbonn Quattro L50 HD: Phone only pairs, need to establish manual connection via media system. Phone Bluetooth compatibility list55√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√ √√ √√√√ √Compatible√Not fully compatibleUnsupportedBlank
Manufacturer: Guangdong Creator & FlyAudio Ele & Tech Co., Ltd.Address: Floor 3,Building F, Creator & FlyAudio Xinyong Sheng Industrial Park, No.3 Industrial District, Gekeng Village, Hengli Town, Dongguan City, Guangdong Province, China, 523460Issue Date: 22nd Mar.2018Execute Standard: Q/TYFG 1-2016GSDB code : HH50ABP02V0218R2J7BJ 19C104 AC

Navigation menu