GUANGZHOU NOVO SUN SHADING TECHNIQUE MD30964 transmitter User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	3625623
Application ID	iqmPiswOPgm6wl83Oox+Nw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.89kB (198583 bits)
Date Submitted	2017-11-02 00:00:00
Date Available	2017-11-02 00:00:00
Creation Date	2015-12-18 14:38:52
Producing Software	Corel PDF Engine Version 16.1.0.843
Document Lastmod	2017-10-10 17:07:20
Document Title	未命名 -1
Document Creator	CorelDRAW X6
Document Author:	LW-230

A3 Single/Double Channel Touch Screen Free Stick-on
Transmitter Operating Manual
Channel copy: Increased another transmitter for the setting done transmitter, and the receiver can be control by multiple transmitter.
Company reserves the right to change product design and specifications without prior notice then ,
photos are for reference only.
Product Features
Flat Panel High hardness surface,
excellent transparenly
Touch screen fashion trend
Jogging move and continuous
move control individually
868MHz radio frequency has
high sensitivity
Powerful magnet in back, stick
to the wall conveniently
A/2 H12020
Up
Stop
Down
A3 Touch Screen Free Stick-on
Transmitter use 868 MHZ radio
frequency,Remote-controlled
distance is above 100m(visualrange), two reinforced concrete
wall at least 30 m.
868 MHz radio frequency with a
strong anti-jamming capability,
high receiving sensitivity, stable
center frequency and convenient
debugging, etc function in
wireless communications.
Working power supply：
3V button cell（CR2430）
Working frequency：868MHz
Transmit power: 10mW
Working Temperature：
-20℃～70℃
Working Humidity: (Max90%)
Channel 1
Up
Motor rotate
front and
opposite
once
Stop
Motor rotate
front and
opposite
once
Down
Intermittent
promt tone
Channel 1
Channel 2
2.Press [Up+Down] Key at
the same time about 10s
3.When the motor stop within 10s,
Press [Stop]Key about 5s
Up/Down limit setting: Up/Down limit means curtain run Up/run Down can reach high/low position.
This function is only applicable to electronic limit function of the receiver(motor)
Up
Screw hole
Down Key
A3 Single channel Touch Screen
Free Stick-on Transmitter
On the back of the transmitter
Screw hole
Powerful
magnet
Screw
On the back of the
transmitter
Note: battery consumption,working
life is half a year.
Programming operation method
Up
Stop
5、Pressing the [Up/Down] Key to
let blind move,stop it in a suitable
position by pressing [Stop] Key,
which is called uplimit position
The cover can be
easily pried up by a
screwdriver, then
change the battery.
Stop
Motor run
Down
Stop
Down
6.Pressing the [Stop+Up] Key
to comfirm up limit value at
the same time.
9.Pressing the [Stop+Down] Key at
the same time to comfirm down
limit position.
Pressing Up/
Down/Stop Key
to adjust curtain
7.Pressing [Down] Key
within 20s. Setting down
limit.
Motor rotate
front and
opposite
once
10.Pressing [Stop] Key about 5s
with in 20s ,Saving limit position.
Inching/Continuous move mode change: Switch key function for the code setted receiver (motor),after the switch ,receiver (motor) rotate little if
you press the Up or Down key on the transmitter (N09~N16 without this function )
Up
Down
Motor rotate
front and
opposite
Up
once
Motor rotate
front and
opposite
once
Down
Intermittent
promt tone
Channel 1
3.When the motor stop with in 10s ,press
[Up+Stop+Down] Key at the same time.
8、Pressing the [Up/Down] Key to
let blind move,stop it in a suitable
position by pressing [Stop] Key ,
which is called down limit position.
*Note: If you want to reset the limit position.Again operate Up/Down limit set up step.
**Note: Different motor have different prompting mode,please refer detail with specification.
Intermittent
promt tone
2.Press the [SET Key] on
the motor
4.Pressing [Up] Key within 20s,
Setting up limit position,
Warning tone close.
Stop
Motor rotate
front and
opposite once
Channel 2
Motor run up
A prompt
sound
Change the batter y
The transmitter must match code with receiver, and then the receiver can be remote control by transmitter.
* Repeat operating match code procedure once can delete the code (Delete code on transmitter).
Up
Sirens
prompt
tone
3. When the motor stop
with in 10s ,press [Down] Key
about 5s.
Finish setting
the up limit
position
A prompt
sound
Finish setting
the down limit
position
Down
(FOR EXAMPLE: E24-EL-SA-1 VENETIAN MOTOR)
Motor rotate
front and
opposite
Up
once
Stop
2、Press[Up Key+Down Key]
about 10s；
Pressing Up/
Down/Stop Key
to adjust curtain
1. Fix the bracket to the right position
with a screw, it can be adsorbed by
build-in powerful magnet.(as the picture)
2. Open the surface cover, fix the bottom
cover to the right position with screw,
then close the surface cover.
3. Stick Double-sided foam tape on the
bottom cover, then stick to the right
position.
Bracket
Down
Channel 2
Three installation methods :
Wall
Powerful
magnet
Channel 1
1.Pressing the [Channel Key]
choose need to set the limit
channel.
Stop
Install Sketch Map & Change the battery
Enter setup
mode
Intermittent
promt tone
Powerful magnet
A3 Double channel Touch Screen
Free Stick-on Transmitter
Motor rotate
front and
opposite
once
Down
Stop Key
1.Choose the channel you
want to set
3.When the motor stop within 10s,
match code on another transmitter.
Transmitter the curtain will go downwards , while after direction changed , curtain will go upwards when you press the Up Key !
Key functions
Channel 1
Intermittent
promt tone
2.Press [Up+Stop+Down] Key
at the same time about 10s
1.Choose the channel you
want to set
Match Code:
Motor rotate
front and
opposite
once
Change the direction: Change the direction for the code setted receiver .for example, before direction changed, if you press the Up Key on the
Note: electronic products need
dampproof , can not use in high
humidity with a long time.
Up Key
UP
LEFT
DOWN
Channel 2
1.Choose the channel you
want to set
Indicator
light
发
Motor rotate
front and
opposite
once
Channel 2
1.Choose the channel you want
to set.
2.Press the [Up+Down] Key
about 10s at the same time.
3.Press the [Up] Key around 5s
within 10s after the motor stop.
Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device
can be used in portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : LW-230
Create Date                     : 2015:12:18 14:38:52+08:00
Modify Date                     : 2017:10:10 17:07:20+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : LW-230
Title                           : 未命名 -1
Creator Tool                    : CorelDRAW X6
Metadata Date                   : 2017:10:10 17:07:20+08:00
Producer                        : Corel PDF Engine Version 16.1.0.843
Document ID                     : uuid:9668a40c-bee2-4593-90d6-c39e0c5ee204
Instance ID                     : uuid:9c800619-50ff-40b6-9d31-bff96d9ed3ad
Page Count                      : 2

EXIF Metadata provided by EXIF.tools