GUANGZHOU TAIMA TS4500HA Wireless Barcode Scanner User Manual TS4500 x
GUANGZHOU TAIMA(TICODE) ELECTRONICS TECHNOLOGY LTD. Wireless Barcode Scanner TS4500 x
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2649661 |
| Application ID | wsiXkrN1ftThNTshsFDhgQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 38.89kB (486125 bits) |
| Date Submitted | 2015-06-16 00:00:00 |
| Date Available | 2015-06-16 00:00:00 |
| Creation Date | 2015-05-20 17:30:11 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2015-06-16 15:47:39 |
| Document Title | Microsoft Word - TS4500 User manual.docx |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Administrator |
VER: TS4 5_QG_EN_V1.1.0 Wireless Barcode Scanner Scanner & Cradle ②．Channel Increase ⑦．Power interface ③．Channel Decrease ⑧．Data interface to connect PC ④．Power Indicator ⑨．Adjust button ⑤．Data Indicator ⑩．Antenna Installation Quick Reference Guide Step1. Refer to the below pictures, connect the cradle to host (e.g. PC) with different cables firstly, and then connect the adaptor to the power socket. USB: USB cable RJ45 connect cradle ⑧, the other side connect PC. ①Power Indicator ③Trigger ②Data Indicator ④Exit Window USB cable P/S 2: P/S2 cable RJ45 connect cradle ⑧, the other side to connect PC and P/S2 port keyboard Set Defaults FCC-ID: 2AET8TS4500HA ①．Pairing ⑥．Reserve When the scan ner is out of communication area of the cradle, the RS232 scanner will save th e bar code da ta i n bui lt-in da ta me mory. The scanner will send the data to the cradle automatically when the scanner Step 2. Put the scanner onto the cradle like below picture. gets back to the communication area. The scanner d ata indicator will become red. After f inish sending data, the indicator will to be green. More Than One Cradle Work In The Same Space When there are more than one cradles working in the same space, it is better to set every cradle work in different channel. Channel is set P/S2 keyboard cable RS232：RS232 cable RJ45 side to con as follows: nect 1. Open a notepad or other text editor. ⑧ ,the other Place the Scanner side to connect PC. 2. Press the cradle Channel increase or decrease button. Step3. Press cradle middle button①（P）for about 4 seconds, until 3. Pairing the scanner and cradle. Note： After changing the channel of a cradle pairing is need. the Scanner issued a "beep beep" sound. Note: A cradle is able to work with as more as 100 scanners at the When more than one crad le work in the sa me channel, it will reduce the same time. After a Scanner pairing with Cradle, the cradle can bar code data transmission speed, but no any other problems. receive the data from the scanner. Usage of Scanner Power Up/Power Down Scanner wi ll be power up whe n the trigg er is cl icked. W hen the scanner is not operated for 30 s, it will RS232 cable enter power down Indicator & Button modeScanner Indicator Typically, cradle is able to identify the data port type automatically. automatically Status Left Light In extreme cases cradle port may need setting manually if the host Charging Scan Success Bright Red 1sec Bright Red 1sec fails to identify it. Position the scanner onto the cradle. Power on Green Note: Pairing before set interface type. Note：The scanner power i ndicator beco mes green and keeps Low Power Green flashing Charging Red flashing Finish charge Yellow No data stored in Green Automatic Identification (Default) USB PS/2 flashing when the scanner is low power. Built-in Data Memory Start transfer Bar Code Data (for Manual Transmission Mode) Scanner Data stored Red In Information inquire Fire Ware Version Scanner Red Data memory full Clear the Barcode Data in Scanner Scanner Serial No Check Flashing Cradle Serial No Cradle Indicator Battery inquire Light Meaning Right （Green） Flashing: identifying interface Insert the scanner ID before barcode in order to identify the barcode Channel &scanner ID is s can b y which s canner when th ere are m ore th an one s canner On: interface if identified Middle （Red） communicate with the same cradle. Suffix Quick Setup Flashing: Receiving barcode data Insert ID before Barcode CR（default） On: Data is sending to PC Left （Green) LF Reserve CR+LF None Cradle Button Button Position Function RF Transfer Mode （mark） Channel Right Decrease Button (-) No-store Mode: The scanner transmits every scanned barcode to Set channel decrease cradle. If transmitted unsuccessfully (e.g. beyond communication distance or cradle does not connect PC), the barcode data will be Channel Middle (P) Press for 4second to scanner with a cradle. increase Channel Left increase Button (+) Set channel increase Insert The Scanner ID before Barcode pair ignored and the issued a “beep beep beep” sound. Auto-store Mode: The scanner starts storing barcode data when it loses its connection to a cradle (e.g. a user holding the scanner walks out of range).Data transmission is triggered by reestablishing the Do not insert ID （default） Code name transmission Transmit Do Not Transmit （Default） Volume of beeper High（Default） Middle Low Mute connection with cradle.(like when a user holding the scanner walks back into range) Common Settings Manual Transmission mode: Data transmission is triggered b y scanning”Start transfer Bar code data” Set Defaults Set Defaults Prefix Transmit Prefix Do not Transmit Prefix (Default) Auto-Store Mode (Default) NO-Store Mode Manual Transmission Mode bef ore B arcode Scan Prefix(0~16 Chars, 2Digits/Char; 00~FF; 00*） Suffix Suffix（Default） Do Not Transmit Suffix Scan Suffix (0~22 chars, 2 Digits/Char; 00~FF; 0D*) Parameter bar code Finish Setting FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : Administrator Create Date : 2015:05:20 17:30:11+08:00 Modify Date : 2015:06:16 15:47:39+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2015:06:16 15:47:39+08:00 Producer : Acrobat Distiller 9.0.0 (Windows) Format : application/pdf Title : Microsoft Word - TS4500 User manual.docx Creator : Administrator Document ID : uuid:98f7ce88-9979-4c6d-8396-e2dc42bfb179 Instance ID : uuid:51971dc5-736b-4351-a763-4ba3f2f0206e Page Count : 5EXIF Metadata provided by EXIF.tools