GUARDIAN MTX01-CC Remote for Garage Door Opener User Manual B3F6B0E6CEEF32

Download:
Mirror Download [FCC.gov]
Document ID	3453911
Application ID	48kO/8NnfUIrp5/7uyC+fg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	14.81kB (185139 bits)
Date Submitted	2017-07-06 00:00:00
Date Available	2017-07-06 00:00:00
Creation Date	2017-06-13 11:34:42
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2017-07-06 17:10:55
Document Title
Document Creator	PScript5.dll Version 5.2.2
Document Author:	chendan

User Manual
Visor Clip
Signal and Battery Indicator
Fig.1
To Program Transmitter(s):
1.
Press/release the “LEARN” button on the rear control
panel, “OK” LED will glow and beep. The unit is now
ready to accept a transmitter in the next 30 seconds as
shown in Fig.2.
2.
Press/release the large grey button on the Transmitter.
(Additional buttons used for multiple garage door openers)
3.
The “OK” LED will flash twice indicating transmitter is
stored successfully.
LEARN
Up to 20 Transmitters (including wireless keypad codes) can
be added to the unit by repeating the above procedures.
OK
30
If more than 20 Transmitters are stored, the first stored
Transmitter will be replaced. (i.e. the 21st Transmitter
replaces the 1st stored Transmitter.)
Removing ALL Transmitters:
Fig.2
To remove ALL Transmitters from memory, press and hold
the “LEARN” button for 5 seconds. The “OK” LED will flash
and beep 2 times indicating ALL transmitters have been
removed from memory.
Fig.3
Replacing Transmitter Battery:
OK
Flashes x2
When the battery of the hand held Transmitter is low, the
indicator light will become dim and/or the range of the
Transmitter will decrease. To replace the battery, remove the
battery cover from the Transmitter as shown in Fig 3. Replace with a 23AE 12 volt alkaline battery with polarity shown
in Fig.3.
23AE 12 Volt
HomeLink® Compatible
This opener is compatible with HomeLink® in-vehicle systems.
Consult your vehicles owner’s manual for correct programming
instructions. NOTE: For all other in-vehicle remote systems, contact
the vehicle manufacturer for correct programming instructions.
This device complies FCC Rules for HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate
equipment.
Guardian Shanghai Corp.
368,MInShen Rd, Song Jiang, Shanghai, China,201612

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : chendan
Create Date                     : 2017:06:13 11:34:42+08:00
Modify Date                     : 2017:07:06 17:10:55-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:07:06 17:10:55-07:00
Format                          : application/pdf
Title                           : 
Creator                         : chendan
Document ID                     : uuid:fe2fd84b-f9fa-4e26-91d0-b3c24a1f910c
Instance ID                     : uuid:c1f3d82e-0bd3-43dc-8c47-2bf2d1dff6e1
Page Count                      : 1

EXIF Metadata provided by EXIF.tools