GUARDIAN PTX01-CC Remote for Garage Door Opener User Manual P3B pub

Download:
Mirror Download [FCC.gov]
Document ID	3449726
Application ID	QcmTAxjFjgrCR4cSi7Zp+A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.9kB (111196 bits)
Date Submitted	2017-07-04 00:00:00
Date Available	2017-07-04 00:00:00
Creation Date	2017-06-13 16:14:57
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2017-06-29 18:26:46
Document Title	P3B_user manual.pub
Document Creator	PScript5.dll Version 5.2.2
Document Author:	chendan

User Manual
To Program Remote Control(s):
1.
See Fig.2 to add a Remote Control. Press the “LEARN”
button on the rear control panel of the Opener. The
courtesy light will illuminate with an audible click*. The
unit is now ready to learn a Remote Control.
2.
Within 30 seconds, press the button on the Remote
Control.
3.
The courtesy light will flash twice indicating Remote
Control has been stored successfully**.
Visor Clip
Fig.1
Up to 20 Remote Controls (including wireless keypad codes)
can be added to the unit by repeating the above procedures.
LEARN
If more than 20 Remote Controls are stored, the first stored
Remote Control will be replaced. (i.e. the 21st Remote Control replaces the 1st stored Remote Control.)
* If the courtesy light is already on, it will flash once and stay
illuminated for 30 seconds.
30
** If a Remote Control is not accepted, the courtesy light will
stay on for 30 seconds, flash 4 times and then stay on for 41/2
minutes. Retry programming the Remote Control by repeating the steps above.
x2
Removing ALL Remote Controls:
Fig.2
To remove ALL Remote Controls from memory, press and
hold the “LEARN” button for 5 seconds. The courtesy light
will flash 7 times indicating ALL Remote Controls have been
removed from memory.
Replacing Remote Control Battery:
When the battery of the hand held Remote Control is low,
the indicator light will become dim and/or the range of the
Remote Control will diminish. To replace the battery, remove
the battery cover from the Remote Control as shown in Fig 3.
Replace with two CR2016 6 volt alkaline batteries with polarity
This device complies FCC Rules for HOME OR OFFICE USE. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any Changes or
modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate equipment.
Guardian Shanghai Corp.
368,MInShen Rd, Song Jiang, Shanghai, China,201612

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : chendan
Create Date                     : 2017:06:13 16:14:57+08:00
Modify Date                     : 2017:06:29 18:26:46-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:06:29 18:26:46-07:00
Format                          : application/pdf
Title                           : P3B_user manual.pub
Creator                         : chendan
Document ID                     : uuid:231aceeb-da23-456f-921e-19ca6433d335
Instance ID                     : uuid:d2c5af4d-3072-4a33-aa58-99aa8a1826e7
Page Count                      : 1

EXIF Metadata provided by EXIF.tools