GUARDIAN WKTX01-CC Wireless Keypad CC User Manual wkcc 17 6 13 pub

Download:
Mirror Download [FCC.gov]
Document ID	3448967
Application ID	tnOT1bheAMuMf8sHn1lLTA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.4kB (117478 bits)
Date Submitted	2017-07-03 00:00:00
Date Available	2017-07-03 00:00:00
Creation Date	2017-06-13 16:14:36
Producing Software	Acrobat Distiller 10.1.0 (Windows)
Document Lastmod	2017-07-03 18:53:25
Document Title	wkcc_user manual17-6-13.pub
Document Creator	PScript5.dll Version 5.2.2
Document Author:	chendan

User Manual
Model : WKCC
To Add Personal Codes:
1.
Press/Release the “LEARN” button on the rear control
panel, courtesy light will glow# or “OK” LED will glow and
beep*. The unit is now ready to accept a transmitter in
the next 30 seconds as shown in Fig.1.
2.
Enter 2 - 6 digit(s) personal code on the Keyless Entry
within 30 seconds and press/release
button.
3.
Courtesy light will flash twice# or “OK” LED will flash and
beep twice* indicating personal code is stored in
memory.
Up to 20 personal codes (including 1-button transmitters) can
be added to the unit by repeating the above procedures.
If more than 20 personal codes are stored, the previously
stored one from the very beginning will be replaced, i.e. the
21st transmitter replaces the 1st stored one.
Operation:
To access the door, enter a pre-stored personal code and press
to transmit code, and within 20s, the
button can
be used to stop or reverse the door.
If the code is entered incorrectly, correction can be made by
pressing
to reset and re-enter code.
When dark,
light.
may be pressed in advance to turn on back
Removing ALL Personal Code(s):
Fig.1
To remove ALL personal code(s) and/or transmitters from
memory, press and hold the “LEARN” button for 5 seconds.
Courtesy light will flash or “OK” LED will flash and beep,
indicating ALL codes/transmitters have been removed from
memory.
For units with AC motor
*For units with DC motor
Mounting the Keyless Entry:
Keyless Entry may be secured on door jamb face outside your
garage. Refer to Fig.2, locate the Keyless Entry within sight of
door at minimum height of 5 feet (1.5m), ensure it is away from
reach of children and moving parts of door and hardware. Test
the reception of the Keyless Entry before mounting. Change
location for better reception if necessary.
Use the mounting holes on the Keyless Entry as template to mark
position on the mounting surface. On wooden use the screws
provided. In case of drywall surface, drill holes and use drywall
anchors provided.
Replacing Keyless Entry Batteries:
When the battery of Keyless Entry is low, dimmed illumination is
observed. To replace batteries, remove the battery cover, replace
the batteries with (2) 1.5V AAA alkaline batteries.
This device complies FCC Rules for HOME OR OFFICE USE. Operation is
(2)
subject to the following two conditions: (1) this device may not cause harmful
Fig.2
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate equipment.
Guardian Shanghai Corp.
368,MInShen Rd, Song Jiang, Shanghai, China,201612

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : chendan
Create Date                     : 2017:06:13 16:14:36+08:00
Modify Date                     : 2017:07:03 18:53:25-07:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 10.1.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:07:03 18:53:25-07:00
Format                          : application/pdf
Title                           : wkcc_user manual17-6-13.pub
Creator                         : chendan
Document ID                     : uuid:6fe150bb-bc70-4c58-8ee4-4137fb43ac8c
Instance ID                     : uuid:3f98076a-da00-4dd0-b5af-65f1df67151a
Page Count                      : 1

EXIF Metadata provided by EXIF.tools