Gaon Int GBT-100 FM Transmitter with Bluetooth Module User Manual Soundfly Auto En manual
Gaon-Int Co., LTD. FM Transmitter with Bluetooth Module Soundfly Auto En manual
Gaon Int >
User manual
* Please read this manual carefully before using Safty precautions 1. This product should be used only for 12V cigarette lighter socket power. 2. Do not start your car being put a SoundFly BT into the cigarette lighter socket because the fuse could be burnt out. 3. Operate the device while the car is stopped to avoid the car accident. 4. Do not expose it to direct sunshine. 5. Avoid using the device in strong magnetic field. 6. Do not subject the device to severe impact or dropping from high position. 7. Keep the device away from any liquids. 8. We are not responsible for the damages caused by misusing and repairing the device or battery replacement. 9. Pause SoundFly BT when you stop the car or disconnect portable hard disk to avoid damage to SoundFly BT or hard disk. BT Specifications User Manual * Caution :This product can be used only for 12V cigarette lighter socket power. Package Content Bluetooth Standard v2.0 (Class II) with A2DP Product Dimension 94 * 47 * 65mm Weight of the product 65g Frequency range 88.1 ~ 107.9MHz Input power 12V Output power Conformity with CE Modulation FM(F3E) USB Rated output power 5V 200mA Getting Started -With Mobile phone [Getting started] Main unit / stereo cable / External Microphone / additional fuse / user manual Place the SoundFly BT into the 12V cigarette lighter socket. Adjust the device, that it can be operated comfortably. The display appears immediately. The equipment is ready for use. The SoundFly BT checks, if it was already a link with a mobile phone and tries to establish a connection. Then it checks whether a device is attached to the USB port or SD card is in the card slot and starts to playback the music. Description & Functions Application description Make a call / Take a call Music source select [Pairing] Refer to specific instruction supplied with your phone for details on pairing Bluetooth devices. Press button for 2 seconds to enter pairing mode. The display shows “PAo” and . If buttons are blinking, SoundFly BT is 1. trying to link to the last connected mobile phone or 2. in the pairing mode. In case of no.1., press button to stop connecting last mobile phone then blinking of buttons are off. Control your mobile phone to search for new Bluetooth devices. You will see SounFly BT in your mobile phone. Entry SoundFly BT in your mobile phone, If the phone requests for a passwords, enter “0000”. Herewith paring is successfully finished. You can see “bto” on the display once the paring is done. Depending on the types of mobile phone, the mobile phone can ask service menu to make the connection. In this case you can select “Stereo hedset & Handsfree” or all device supported. After all these process is done, you can see buttons are illuminated. End a call Refuse a call Power on/off SD card slot Menu / File Repeat Display Audio in Memory/ Directory(Folder) Repeat Earphone connector Rewind Microphone connector Forward USB Port Play/Pause Cover Now you should plug the microphone delivered with the product into suitable place of the device. From now on all telephone calls are led to SoundFly BT. Getting Started -With Mobile phone Getting Started -With Mobile phone [Change Audio pass route during talking over the phone] [Disconnect with a mobile phone] Press the button for about 2 seconds to disconnect a mobile phone. The display show “bto”. Also you can control Bluetooth mobile phone to disconnect SoundFly BT. [Take a call] During an incoming call the music playback is paused. The display shows “Ino” and the phone number of the incoming call. The display of the car radio shows REC CALL and then the number of the incoming call using RDS function. Press briefly button to take a call. During the incoming call the display shows “Ino”. If the call is finished the device starts playback at the position where it was paused. You can change audio pass route pressing button while you are talking over the phone. If you press button while you are talking over mobile phone, audio pass will be changed into handsfree, the opposite case is also supported. [Additional Bluetooth Settings] Automatic Connection with a mible phone Press 5 times briefly MENU/F.REPEAT button. Select “Ato” or “NOR” with / button. “Ato”: SoundFly BT tries to link to the last connected device. Select “Ato” or “NOR” with the / button. [Refuse a call] Press If the menu for the settings is active, then a LED below the MENU/F.REPEAT button appears. to refuse a call when incoming call. [Make a call] Dial the desired telephone number at your mobile phone. The display of the SoundFly BT shows “bto”. The microphone should have been connected. During the call, the display shows “CAo” then the display shows “Ino” when a call connect a receiver. To end the call press briefly button. [Redial] [Setup frequency] Press the MENU/F.REPEAT button. Adjust the frequency with / button. Press the MENU/F.REPEAT button once again. [Source select] Press briefly button to redial the recently dialed tehephone number. The display shows “CAo”. Press repeately PHONE/SD-USB button. SD card [Select Audio pass route] USB host connector You can speak by handsfree even if you make a call using mobile phone. You can select this function as below. 1. Click MENU/F.REPEAT button six times. / buttons to be shown “Aud” or “Nor” on display. 2. Select option with 3. Press MENU/F.REPEAT button once again. Getting Started -With Portable audio device Sound-Fly BT lets you listen to your portable audio devices such as MP3 player, CD player, portable DVD player, or mobile phone through any FM radio speaker. 1. Automatically power is on once you put Sound-Fly BT into the car cigarette liter socket. ※You can also power on & off pressing the power button for about 2 seconds. If no audio signal is detected for 1 hour, power is automatically off. 2. Turn on the radio and find a frequency that is not being used for broadcasting. Match the frequency of Sound-fly SD to your radio using / button. 3. Connect portable audio device(MP3P, CDP, PMP, PDA, navigation or mobile phone etc.) to Sound-Fly BT with included stereo cable. 4. Turn on the audio device and press the play( ) button. 5. Set the volume to a reasonable level to get the best signal quality. ※Set the volume of audio device to medium level and control the delicate volume using radio volume to get the quality sound. MP3 from mobile phone Getting Started -With Memory devices Sound-Fly BT lets you listen to sound files like MP3, WMA in memory devices such as USB storage, SD card through any FM radio speaker. 1. Automatically power is on once you put Sound-Fly BT into the car cigarette liter socket. ※You can also power on & off pressing the power button for about 2 seconds. If no audio signal is detected for 1 hour, power is automatically off. 2. Turn on the radio and find a frequency that is not being used for broadcasting. / button. Match the frequency of Sound-fly SD to your radio using 3. Plug USB storage or SD card into Sound-Fly BT, ※USB port is placed at the bottom & SD slot is placed on the right side of Sound-Fly BT. Music files(MP3 & WMA file) stored in the memory devices are automatically played. Sound-Fly BT Supports only MP3 and WMA file, the other types of files and the files locked by DRM are not played. (format type: FAT32) * Using USB storage - Recognize up to 32GByte, 1999files. - Support directory loading up to 5-level depth, Max 20 directories. * Using SD, MMC card - Recognize up to 16GByte(SDHC), 1999files. - Support directory loading up to 5-level depth, Max 20 directories. * Using another type of memory devoces (CF memory stick) - You need to connect special proper USB converter. * Using portable hard disk - When you use portable hard disk, you need to divide the disk into under 32Gbyte and format it with FAT32. Sound-fly recognizes only the first drive under 32Gbyte so you need to store the files in the first drive.When you use portable hard disk, you must connect extra power with ‘cigarette liter jack to USB’ cable. We do not take the responsibility of any problem caused by not connecting extra power. 4. Set the volume with the volume setting function of Sound-Fly Auto. Operation-1 Operation-2 [RDS Interval] [Playback] Press button for playback or pause Press briefly previous track. buttons, to select the next or This function is available, if an audio device is connected to the USB port or a SD card is in the slot. Press the MENU/F.REPEAT button briefly 4 times. / buttons Adjust the display interval time with (2-6seconds) Press the MENU/F.REPEAT button once again. [Display mode] Press and hold previous folder. button to select the next or After the playback is started, the display shows the remaining playback time or the frequency depending on the display mode. [Volume] This function is available, if an audio device is connected to the USB port or a SD card is in the slot. Press and hold display mode. button during playback for 2 seconds to switch the Frequency This function is available, if an audio device is connected to USB port or SD card is in the slot. Press the MENU/F.REPEAT button briefly twice. The display shows a bar with the current volume setting. / buttons. Adjust the required volume with [RDS display mode] This function is available, if an audio device is connected to the USB port or a SD card is in the slot. Press the MENU/F.REPEAT button briefly 3 times. Select RDS display mode: Audio level Remaining playback time [Repeat] This function is available, if an audio device is connected to the USB port or a SD card is in the slot. SoundFly BT has a repeat function. If the repeat function is on, the tracks are played repeatedly. Press the MENU/F.REPEAT button during playback for 2 seconds. The display shows in order. Normal Repeat the current track The display of the car radio shows 8 characters during the user selected time. Press the MEM/D.REPEAT button during playback for 2 seconds. The display shows in order The RDS information scrolls through the display every second. Press the MENU/F.REPEAT button briefly twice. Repeat the current folder Normal Tips for convenient use of Sound-Fly BT Operation-3 [Storing frequencies] [Directory shift] -Search Defined Folder & Play Press briefly MEM SD-USB button. The display shows [-]. Select a memory (1-7) with / buttons. Press MENU/F.REPEAT button once again. - Sound-fly BT has the feature that plays the music files only in defined folder. and moves to the other directories. - It lets you put the files in order and use conveniently. 1. Make the folder, named MP3 or Soundfly. [Select memory] Press repeatedly MEM SD-USB button until the desired frequency appears in the display. With every keystroke on MEM SD-USB button, the next memory is selected. 2. Make the subfolders belonging main folders. It’s better if you store about 20 files in one subfolder to find the files easily. [Adjust audio input level (Audio in)] In order to have the best signal quality, it is necessary to adjust the volume of the connected audio device. Follow the below guideline.: Start playback of the audio device. Adjust the volume to a low level. Now increase the level until the noise disapears. Keep the level in mind. Increase the level until a distortion is heard in the radio. Keep also this level in mind. Now adjust the volume level to the middle of these 2 values, which you have determined. [Folders and Files] The device can manage up to 1999 files and numbers automatically as 001 -1999. You can create folders in the main directory to manage files easier. The folders will be played in the same order as they are copied onto the memory device. SoundFly BT finds up to 20 folders. These folders are shown briefly in the display as d1-d20. If no folder is found the tracks are played in order. 3. You can search the files you want fast and easily with directory shift feature even if you stored numerous files. [The way to lessen noise] 1. Do not expose it to direct sunshine. 2. Do not put Sound-fly near a magnet or the devices which makes strong electric power. 3. Select the frequency that is not being used for broadcasting. 10 Remote control-2 Remote control-1 Source select(USB, SD, A2DP mode) End a call, Refuse a call, End A2DP Take a call, Change audio pass route Move to previous folder Move to next folder Move to previous track Move to next track Play / Pause Volume down Rewind Volume up Fast forward Frequency up Frequency down Repeat Bookmarking Press the buttons to move to previous(next) folder, first song of the folder is played. Press the buttons to move to previous(next) song. Press the buttons fast forward or rewind 2x, 5x, 10x. Press the buttons to adjust the frequency in 0.1MHz intervals. Hold the buttons longer than 2seconds, the frequency is adjusted in 1 MHz intervals. Selective replay of a part of a track. Press button to mark the starting point. The playback of the song continues. Press to mark the ending point. To cancel, press once again. You can use this feature in case the playing time is long such as lecture file & language file. Before you shut the device off, Press BOOKMARK button to store the point of time. When you turn the device on again, the device plays from the point you memorized. [Setup SoundFly BT] Place SoundFly BT nearby the radio or the antena. A-B repeat The quality of the reception in the car can be different. It can be necessary to test different places in the car to get the best result. The best reception is obtained in the car if SoundFly BT operates with the enclosed cigarette lighter adaptor. Please use the remote control after having removed the protection sticker. Answer the phone, make a call, redialing, Change audio pass route End a call, Refuse a call, Stop MP3 playback from mobile phone [Select FM frequency] Select a frequency that is not being used for broadcasting purposes. Turn SoundFly BT on and find the frequency adjusted in the FM radio. Connect the MusicFly to the audio unit. Turn on the audio unit and start playback Press the button and choose the mode between mobile phone, SD card & USB mode. REPEAT Press REPEAT button, the song you are listening to is played repeatedly. Press repeat button again to folder repeat. Press repeat button again stop the repeat function. 11 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-702 Format : application/pdf Title : Soundfly Auto_En manual Creator Tool : Adobe Illustrator CS2 Create Date : 2009:07:09 18:53:12+09:00 Modify Date : 2009:07:17 14:09:56+09:00 Metadata Date : 2009:07:17 14:09:56+09:00 Thumbnail Width : 52 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 9087 bytes, use -b option to extract) Document ID : uuid:AC31052C2B6CDE11BE39CE81A619971F Instance ID : uuid:3b2e7fad-2dc9-47cd-96a6-09640f351e14 Derived From Instance ID : uuid:6bee0ae6-e6f9-4029-9fe4-48d776c84062 Derived From Document ID : uuid:2705391931C0DD11AD3CC1FFE963F4EB Producer : Adobe PDF library 7.77 Page Count : 1 Container Version : 9 Creator Version : 12 Creator : Adobe Illustrator(R) 12.0 For : �����س�Ʈ��, ���¾��̿�Ƽ Bounding Box : 0 -138 532 2496EXIF Metadata provided by EXIF.tools