Gaon Int PG463 FM Transmitter User Manual GWT 150 FCC Manual English

Gaon-Int Co., LTD. FM Transmitter GWT 150 FCC Manual English

User manual

Set up GWT-150GWT-150GWT-150On & Off/ ScanningPress the Power button once. The display shows the frequency. The device checks an audio signal is on.Power offPress the Power button twice to turn the unit off.In no audio signal is detected or no buttons is pressed meanwhileGWT-150 tunes automatically off after 1 minute.Connect GWT-150 to the portable audio device and the set the volume of the audio to the best signal. (The audio volume needs to be set to medium level because it could be made noise in case that the audio volume is set overly high)Setting and storing empty frequencies with auto-scan functionPress Power button for about 2-4 seconds to find out empty signals.The display shows “ScAn” and looks for best signal scanning radio frequencies.* Short scan: Press Power button for about 2 seconds and stop when                     you see “ScAn nEAr” on the display. GWT-150 scans                      and finds out the empty channel channel from nearby                      frequencies.* Full scan: Press Power button for about 4 seconds and stop when                   you see “ScAn ALL” on the display. GWT-150 scans and                  finds out 6 empty channels from whole range of                   frequency.    ** Auto-Preset function: GWT-150 sets 6 preset automatically after                                           full scan.Tune the same frequency of the radio as the frequency which is scanned by GWT-150.Use of follow-me functionPress Power button for about 2-4 seconds when the music fromportable audio device is playing through the radio speacker.The display shows “Tune” and looks for the best signal scanning radio frequencies.GWT-150 find out the best frequency and the radio display shows the frequency which is scanned by GWT-150 and then the radio follows the same frequency automatically Select memoryPress Up/Down button to select the frequency from 6 stored preset.Please set the unit nearby the radio or antena.GWT-150Set up FM radio with manual tuningSelect a frequency that is not being used for broadcasting purposes.Turn the unit on and find the frequency adjusted in the FM radio.Connect GWT-150 to the portable audio device.Turn the audio unit and start playback.Turn GWT-150 on.

Navigation menu