Gaon Int SP-400T 2.4GHz Band Low-Power Data Communication System Tr User Manual SP 400 Manual English
Gaon-Int Co., LTD. 2.4GHz Band Low-Power Data Communication System Tr SP 400 Manual English
UserManual.wiki
>
Gaon Int
>
SP 400T User Manual
User manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![Thank you for choosing the i-POINTERFor proper use please read the enclosed instructions carefully.QUICK INSTALL GUIDE1. Install the provided battery on the Remote Controller. 2. Insert the Receiver into the USB port. 3. LED light on the Receiver starts blinking. Press “Up” or “Down “ button on the Remote Controller for two seconds until LED light becomes steady OFF, The blink works when push the buttons.4. Open MS PowerPoint. Check the operation by pressing [c] and/or [d] buttons on the Remote Controller. PowerPoint frame should advance forward or backward after pressing the button.5. If PowerPoint does not respond, repeat the process from step 1. Characteristics of the i-POINTER1. Remote Controller The Remote Controller allows you to remotely move PowerPoint frames forward or backward. 2. RF Transmission i-POINTER uses RF signal to control PowerPoint frame, Effective operating range of i-POINTER is 100 feet. Each i-POINTER uses unique I.D. code, so one i-POINTER will not interfere with other i-POINTERs when multiple i-POINTERs are used concurrently. 3. Use of USB Port i-POINTER uses standard USB port and works with IBM PC. Keyboard or mouse can be used while using i-POINTER. 4. Laser Pointer i-POINTER is equipped with High quality laser pointer](https://usermanual.wiki/Gaon-Int/SP-400T/User-Guide-895345-Page-2.png)
![Battery changeUse 1.5V AAA battery 2 EA 1. Slide clip upward to open the battery cover. 2. Replace the battery. Pay attention to the polarity. 3. Slide the cover back into the position until it clicks. 4. Check if the laser pointer functions properly. Setting up the i-POINTER1. Install the battery on the Remote Controller. 2. Insert the Receiver into the USB Port 3. The i-POINTER is installed automatically and will work after it is inserted into the USB Port.4. LED light on the Receiver starts blinking. Press any UP or Down button on the Remote Controller for two seconds until LED light becomes steady OFF.. The blink works when push the buttons. 5. Open MS PowerPoint. Check the operation by pressing [c] and [d] buttons on the Remote Controller. PowerPoint frame should move forward or backward after pressing the button.](https://usermanual.wiki/Gaon-Int/SP-400T/User-Guide-895345-Page-3.png)
