Garmin Canada HRM1 Telemetry Device User Manual INSTRUCTION SHEET manual HRM1 2

Download:
Mirror Download [FCC.gov]
Document ID	601383
Application ID	uYEu3II7CoQgc8U8RIKXzQ==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	2.32kB (28984 bits)
Date Submitted	2005-11-10 00:00:00
Date Available	2005-11-08 00:00:00
Creation Date	2005-09-07 09:18:50
Producing Software	GNU Ghostscript 7.06
Document Lastmod	2005-09-07 09:18:50
Document Title	INSTRUCTION_SHEET_manual_- HRM1 _2_
Document Creator	PDFCreator Version 0.8.0
Document Author:	vbeda

Wearing the HRM1 Heart Rate Monitor
Wear the HRM1Heart Rate Monitor directly on your skin, slightly below your breastbone. Wetting both sensors on the
back of the Heart Rate Monitor will result in optimum capture of heart rate pulses (wet with water or biogel). The strap
should fit snugly enough to remain in place during your exercise session. Proper placement of the Heart Rate Monitor is
also important for optimum capture of heart rate pulses.
Pairing the HRM1 Heart Rate Monitor with a Sports Monitoring Watch
The HRM1Heart Rate Monitor must “pair” with an ANT-enabled Sports Monitoring Watch in order to display Heart Rate
data to the user. To do this:
•
•
•
•
Bring the HRM1Heart Rate Monitor within 10-30 inches (25-75cm) of the Sports Monitoring Watch
Be sure to stand at least 72 inches (183cm) away from any other ANT-enabled Heart Rate Monitor
You can be in proximity to other ANT-enabled devices
After the HRM1Heart Rate Monitor pairs with the Sports Monitoring Watch, the heart rate icon should appear on
the watch and you may also be in proximity to other ANT-enabled devices
Specifications:
Size (max dimensions):
Weight:
Strap:
Power:
Battery life:
Storage temp:
Operating temp:
User-interface:
RF frequency/protocol:
Communication range:
Regulatory compliance:
347 x 42 x 22mm (W x H x D)
29g
Detachable adjustable elastic strap, 425-641mm (L)
Single user-replaceable CR-2032 battery
3 years assuming use of 1 hr/day at 20°C
-20°C to +70°C
-10°C to +50°C
Auto on/off
2.4 GHz / Dynastream ANT transmit protocol
> 3 m (receiver dependent)
FCC, IC, and CE ready
FCC Compliance
Part 15 of FCC Interference Limits for Class B Digital Devices
The HRM1 complies with Part 15 of FCC Interference Limits for Class B Digital Devices. Documents are on file with the
FCC.
Section 21 - Emission of Radio Frequency Energy
The HRM1 complies with FCC Section 21 - Emission of Radio Frequency Energy. Documents are on file with the FCC.
Operational Conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 1
Producer                        : GNU Ghostscript 7.06
Title                           : INSTRUCTION_SHEET_manual_- HRM1 _2_
Creator                         : PDFCreator Version 0.8.0
Create Date                     : 2005:09:07 09:18:50
Author                          : vbeda
Modify Date                     : 2005:09:07 09:18:50
Subject                         : 

EXIF Metadata provided by EXIF.tools