Garmin Canada SDM-A Speed and Distance Monitor User Manual

DynaStream Innovations Inc. Speed and Distance Monitor Manual

a href="https://usermanual.wiki/Garmin-Canada" itemprop="url"> Garmin Canada >

Manual

Preliminary document not for redistribution. Product features and specifications may vary. Copyright ©2005 Dynastream Innovations Inc. 6/6/2006 1 USING THE SDM2 SPEED AND DISTANCE MONITOR The SDM2 Speed and Distance Monitor (foot pod) must be attached securely on the shoe of the user as shown. The pod must stay in place on the shoe for optimum accuracy. • Press the button for 1-2 seconds to power on the pod. The red light slowly blinks, indicating the pod is powered on and sending data. If the red light is solid, the pod is not transmitting data and may require service. • After running, press and hold the button to turn off the pod. The red light becomes solid as the button is held and then turns off as the pod powers off. PAIRING THE SDM2 SPEED AND DISTANCE MONITOR WITH A SPORTS MONITORING WATCH The SDM2 Speed and Distance Monitor must “pair” with an ANT-enabled sports monitoring watch in order to display performance data to the user. Pairing is required only for first use and after a battery change. To pair your monitor: • Power on the SDM2 Speed and Distance Monitor. Bring the pod within 10-30 inches (25-75 cm) of the sports monitoring watch. • Ensure that you are standing at least 72 inches (183 cm) away from any other ANT-enabled speed and distance monitor. You can be in proximity to other ANT-enabled devices. • After the SDM2 Speed and Distance Monitor pairs with the sports monitoring watch, the running shoe icon appears on the watch’s LCD display. The pod and the watch remain paired until a battery change. If the watch has previously paired with a different foot pod, subsequent re-pairing is necessary. The re-pairing procedure is similar to pairing except that the SDM2 Speed and Distance Monitor must be started in RF Pair Mode. To power on the pod in RF Pair Mode, press and hold the button for 3-6 seconds. RF Pair Mode lasts for 60 seconds and is indicated by a double-blinking red light. SDM2 Wireless Speed and Distance Monitor
Download:
Mirror Download [FCC.gov]
Document ID667430
Application IDinU9x8p55cLLGjuWd15Dyw==
Document DescriptionManual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize300.04kB (3750499 bits)
Date Submitted2006-06-12 00:00:00
Date Available2006-06-12 00:00:00
Creation Date2006-06-06 18:16:57
Producing SoftwareAFPL Ghostscript 8.14
Document Lastmod2006-06-06 18:16:57
Document TitleInstructions SDM2 Wireless Speed and Distance Monitor 060606
Document CreatorPDFCreator Version 0.8.0
Document Author: gbuckley
FCC ID Filing: O6RSDM-A

Navigation menu