Garmin 00726 FRS/GMRS UHF Transceiver User Manual 190 00284 00 Prelim FCC indd

Garmin International Inc FRS/GMRS UHF Transceiver 190 00284 00 Prelim FCC indd

UserManual.wiki >

Garmin >

00726 User Manual HTML Version

RINO 130

130

2-way radio &

personal navigator

owner’s

manual

and

reference

guide

Preliminary

190-00284-00_Prelim_FCC.indd a 9/18/2003, 3:50:25 PM

PreliminaryPreliminary

Garmin International, Inc.

1200 E 151st Street, Olathe, Kansas 66062 U.S.A.

Tel. 913/397.8200

Fax. 913/397.8282

Garmin (Europe) Ltd.

Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9AQ U.K.

Tel. 44/1794.519944

Fax.44/1794.519222

Garmin Corporation

No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan

Tel. 886/2.2642.9199

Fax. 886/2.2642.9099

reproduced, copied, transmitted, disseminated, downloaded or stored in any storage

medium, for any purpose without prior written consent of Garmin. Garmin hereby

grants permission to download a single copy of this manual onto a hard drive or other

electronic storage medium to be viewed for personal use, provided that such electronic

or printed copy of this manual or revision must contain the complete text of this copy-

right notice and provided further that any unauthorized commercial distribution of this

manual is strictly prohibited.

Information in this manual is subject to change without notice. Garmin reserves the

right to change or improve its products and to make changes in the content without

obligation to notify any person or organization of such changes. Visit the Garmin web

site (www.Garmin.com) for current updates and supplemental information concerning

the use and operation of this and other Garmin products.

Garmin™, AutoLocate™,

Personal Navigator

™

and TracBack™ are registered trademarks,

Rino

, MapSource

, BlueChart

, and Click Stick

are trademarks of Garmin Ltd.

or its

subsidiaries

and may not be used

without the express permission of Garmin.

September 2003 Part Number 190-00284-00 Rev. A Printed in Taiwan

190-00284-00_Prelim_FCC.indd b 9/18/2003, 3:50:41 PM

Introduction

Preliminary

Thank you for choosing the Garmin Rino (Radio Inte-

grated with Navigation for the Outdoors). To get the most

from your new Rino, take time to read through the Quick

Start Guide ﬁ rst, then this owner’s manual to understand

all of the operating features.

This Reference Manual describes the Main Pages of the

Rino and their options in detail. The Quick Start Guide

describes the process of navigating the Main Pages and the

Option Menus, along with some basic unit operations to

familiarize you with your new Rino right out of the box.

While the Reference Manual provides some direction on

how to select and change items, its main intention is to

describe each Main Page and its Option Menu in detail.

This manual is organized into three sections.

The Introduction section provides FCC, safety, war-

ranty, product registration information, and the Table of

Contents.

The Main Pages section (listed in same order as

viewed on screen) provides details about using the features

of the Rino according to topic. The explanations for each

feature in this section are divided into: (1) An overview

that discusses the feature and how it functions and (2) A

detailed Step-by-Step instruction for using the feature.

The Appendices include Speciﬁ cations, Accesso-

ries, Data Field Deﬁ nitions, MapSource information, a

Troubleshooting Guide, Wiring Diagram and a Time

Offset Chart followed by the Index.

Check to see that your package includes the following

items. If any parts are missing, contact your Garmin

dealer immediately.

Standard Package Contents:

1 Rino Unit

1 Belt Clip

1 Wrist Strap

1 Owner’s Manual

1 Quick Start Guide

1 PC Interface Cable (Rino 130 Only)

About This

Manual /

Packing List

190-00284-00_Prelim_FCC.indd i 9/18/2003, 3:50:42 PM

Introduction

Preliminary

FCC Compliance

GMRS Licensing

FCC Compliance

The Rino 130 complies with Part 15 of the FCC regula-

tions and with Canadian ICES-003 for Class B digital

devices. Operation of this device is subject to the following

conditions: (1) This device may not cause harmful interfer-

ence, and (2) this device must accept any interference

received, including interference that may cause undesired

operation.

This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a par-

ticular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is con-

nected.

• Consult the dealer or an experienced radio/TV

technician for help.

The Rino 130 does not contain any user-serviceable

parts. Repairs should only be made by an authorized

Garmin service center. Unauthorized repairs or modiﬁ ca-

tions could result in permanent damage to the equipment,

and void your warranty and your authority to operate this

device.

FCC Licensing Information

The Rino 130 two-way radio operates on General Mo-

bile Radio Service (GMRS) frequencies that are regulated

by the Federal Communications Commission (FCC) in the

United States. In order to transmit on these frequencies,

you are required to obtain a license from the FCC. An

individual 18 years of age or older, who is not a represen-

tative of a foreign government, is eligible to apply for a

190-00284-00_Prelim_FCC.indd ii 9/18/2003, 3:50:42 PM

iii

Introduction

Preliminary

Warnings &

Precautions

GMRS license. To apply for a GMRS license, you will need

FCC Form 605 (605 Main Form and Schedule F) and

FCC Form 159. You can download the application forms

from the FCC web site at http://www.fcc.gov/Forms/. You

can also request them through the FCC forms hotline at

1-800-418-FORM (1-800-418-3676). You can ﬁ le Form

605 on-line at http://wireless.fcc.gov/uls/. There is a ﬁ ling

fee associated with this application, which may change

from time to time. For information on fees, see the FCC

fee information web page at http://wireless.fcc.gov/csinfo/

feeinfo.html.

GMRS is not currently approved for use in Canada. For

use in countries outside of the U.S., please check with that

government for any restrictions of FRS or GMRS use.

For questions concerning the license application, con-

tact the FCC at 1-888-CALL-FCC (1-888-225-5322)

Warnings and Precautions

The GPS system is operated by the United States

government, which is solely responsible for its accuracy

and maintenance. The system is subject to changes which

could affect the accuracy and performance of all GPS

equipment. Although the Garmin Rino 130 is a precision

electronic NAVigation AID (NAVAID), any NAVAID can be

misused or misinterpreted and, therefore, become unsafe.

The electronic chart is an aid to navigation and is

designed to facilitate the use of authorized government

charts, not replace them. Only ofﬁ cial government charts

and notices to mariners contain all information needed for

safe navigation—and, as always, the user is responsible for

their prudent use.

Use the Rino 130 at your own risk. To reduce the risk

of unsafe operation, carefully review and understand all

aspects of this Owner’s Manual—and thoroughly practice

operation using the Demo mode prior to actual use. When

in actual use, carefully compare indications from the Rino

130 to all available navigation sources, including the

information from other NAVAIDs, visual sightings, charts,

etc. For safety, always resolve any discrepancies before

continuing navigation.

MAP DATA INFORMATION:

One of the goals of Garmin is

to provide customers with the

most complete and accurate

cartography that is available to

us at a reasonable cost. We use

a combination of governmental

and private data sources, which

we identify (as required) in

product literature and copyright

messages displayed to the

consumer. Virtually all data

sources contain inaccurate

or incomplete data to some

degree. This is particularly true

outside the United States, where

complete and accurate digital

data is either not available or

prohibitively expensive.

CAUTION: IT IS THE USER’S

RESPONSIBILITY TO USE

THIS PRODUCT PRU-

DENTLY. THIS PRODUCT

IS INTENDED TO BE USED

ONLY AS A NAVIGATIONAL

AID AND MUST NOT BE

USED FOR ANY PURPOSE

REQUIRING PRECISE

MEASUREMENT OF DIREC-

TION, DISTANCE, LOCA-

TION, OR TOPOGRAPHY.

190-00284-00_Prelim_FCC.indd iii 9/18/2003, 3:50:42 PM

Introduction

Preliminary

Warnings &

Precautions

Important: Read this information before using your Rino.

Exposure to Radio Frequency Signals - Your wire-

less handheld radio is a low power radio transmitter

and receiver. When it is ON, it receives and also sends

out radio frequency (RF) signals.In August 1996, The

Federal Communications Commissions (FCC) adopted

RF exposure guidelines with safety levels for handheld

wireless radios. Those guidelines are consistent with safety

standards previously set by both U.S. and international

standards bodies: American National Standards Institute

(ANSI) IEEE. C95.1-1992; National Council on Radia-

tion Protection and Measurement (NCRP) Report 86;

International Commission on Non-Ionizing Radiation

Protection (ICNIRP) 1996. Those standards were based

on comprehensive and periodic evaluations of the relevant

scientiﬁ c literature. For example, over 130 scientists,

engineers, and physicians from universities, government

health agencies, and industry reviewed the available body

of research to develop the ANSI Standard (C95.1).The

design of your radio complies with the FCC guidelines

(and those standards).

Antenna Care - Use only the supplied or an approved

replacement antenna. Unauthorized antennas, modiﬁ ca-

tions, or attachments could damage the radio and may

violate FCC regulations. Do not use any radio that has a

damaged antenna, because if it comes into contact with

your skin, a minor burn can result.

Bectronic Devices - Most modern electronic equipment

is shielded from RF signals. However, certain equipment

may not be shielded against the RF signals from your

wireless radio.

Pacemakers - The Health Industry Manufacturers As-

sociation recommends that a minimum separation of six

inches (6”) be maintained between a handheld wireless

radio and a pacemaker to avoid potential interference with

the pacemaker. These recommendations are consistent

with the independent research by and recommendations

of Wireless Technology Research. Persons with pacemak-

ers should ALWAYS keep the radio more than six inches

from their pacemaker when the radio is turned ON should

190-00284-00_Prelim_FCC.indd iv 9/18/2003, 3:50:43 PM

Introduction

Preliminary

Warnings &

Precautions

not carry the radio in a breast pocket should use the ear

opposite the pacemaker to minimize the potential for

interference should turn the radio OFF immediately if you

have any reason to suspect that interference is taking place

Hearing Aids - Some digital wireless radios may interfere

with some hearing aids. In the event of such interference,

you may want to consult your hearing aid manufacturer to

discuss alternatives.

Other Medical Devices - If you use any other personal

medical device, consult the manufacturer of your device

to determine if it is adequately shielded from external RF

energy. Your physician may be able to assist you in obtain-

ing this information.

Turn your radio OFF in health care facilities when any

regulations posted in these areas instruct you to do so.

Hospitals or health care facilities may be using equipment

that could be sensitive to external IRF energy.

Vehicles - RF signals may affect improperly installed or

inadequately shielded electronic systems in motor vehicles.

Check with the manufacturer or its representative regard-

ing your vehicle. You should also consult the manufacturer

of any equipment that has been added to your vehicle.

Posted Facilities - Turn your radio OFF in any facility

where posted notices so require.

Commercial Aircraft - Many commercial airlines prohibit

the use of FRS radios on board. Switch OFF your radio

before boarding an aircraft or check the airline rules.

Blasting Areas - To avoid interfering with blasting opera-

tions, turn your radio OFF when in a “blasting area” or in

areas posted: “Turn off two-way radio.” Obey all signs and

instructions.

Potentially Explosive Atmospheres - Turn your radio

OFF and do not remove your battery when you are in any

area with a potentially explosive atmosphere. Obey all

signs and instructions. Sparks from your battery in such

areas could cause an explosion or ﬁ re resulting in bodily

injury or even death.

Areas with a potentially explosive atmosphere are often,

but not always clearly marked. They include fueling

ares such as gasoline stations, below deck on boats, fuel

or chemical transfer or storage facilities; vehicles using

liqueﬁ ed petroleum gas (such as propane or butane); areas

where the air contains chemicals or particles, such as

dlddhh

190-00284-00_Prelim_FCC.indd v 9/18/2003, 3:50:43 PM

Introduction

Preliminary

LIMITED WARRANTY

This Garmin product is warranted to be free from defects in materials or workman-

ship for one year from the date of purchase. Within this period, Garmin will at its

sole option, repair or replace any components that fail in normal use. Such repairs or

replacement will be made at no charge to the customer for parts or labor, provided that

the customer shall be responsible for any transportation cost. This warranty does not

cover failures due to abuse, misuse, accident or unauthorized alteration or repairs.

THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE

AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATU-

TORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR

OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH

MAY VARY FROM STATE TO STATE.

IN NO EVENT SHALL Garmin BE LIABLE FOR ANY INCIDENTAL, SPECIAL,

INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE

USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE

PRODUCT. Some states do not allow the exclusion of incidental or consequential dam-

ages, so the above limitations may not apply to you.

Garmin retains the exclusive right to repair or replace the unit or software or offer

a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE

YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.

Products sold through online auctions are not eligible for rebates or other special offers

from Garmin. Online auction conﬁ rmations are not accepted for warranty veriﬁ cation.

To obtain warranty service, an original or copy of the sales receipt from the original

retailer is required. Garmin will not replace missing components from any package

purchased through an online auction.

To obtain warranty service, contact your local Garmin authorized dealer. Or call

Garmin Customer Service at one of the numbers shown below, for shipping instructions

and an RMA tracking number. The unit should be securely packed with the tracking

number clearly written on the outside of the package. The unit should then be sent,

freight charges prepaid, to any Garmin warranty service station. A copy of the original

sales receipt is required as the proof of purchase for warranty repairs.

Garmin International, Inc. Garmin (Europe) Ltd.

1200 East 151st Street Unit 4, The Quadrangle,

Olathe, Kansas 66062, U.S.A Abbey Park Industrial Estate

Phone: 913/397.8200 Romsey, SO51 9AQ, U.K.

USA Only: 800/800.1020 Phone: 44/1794.519944

FAX: 913/397.0836 FAX: 44/1794.519222

The Garmin Rino 130 has no user-serviceable parts. Should you ever encounter a

problem with your unit, please take it to an authorized Garmin dealer for repairs.

The Rino 130 is fastened shut with screws. Any attempt to open the case to change

or modify the unit in any way will void your warranty and may result in permanent

damage to the equipment.

190-00284-00_Prelim_FCC.indd vi 9/18/2003, 3:50:44 PM

vii

Introduction

Preliminary

Software License Agreement

BY USING THE Rino 130, YOU AGREE TO BE

BOUND BY THE TERMS AND CONDITIONS OF THE

FOLLOWING SOFTWARE LICENSE AGREEMENT.

PLEASE READ THIS AGREEMENT CAREFULLY.

Garmin grants you a limited license to use the software

embedded in this device (the “Software”) in binary execut-

able form in the normal operation of the product. Title,

ownership rights and intellectual property rights in and to

the Software remain in Garmin.

You acknowledge that the Software is the property of

Garmin and is protected under the United States of Ameri-

ca copyright laws and international copyright treaties.

You further acknowledge that the structure, organization

and code of the Software are valuable trade secrets of

Garmin and that the Software in source code form remains

a valuable trade secret of Garmin. You agree not to

decompile, disassemble, modify, reverse assemble, reverse

engineer or reduce to human readable form the Software

or any part thereof or create any derivative works based

on the Software. You agree not to export or re-export the

Software to any country in violation of the export control

laws of the United States of America.

Customer Service Product Registration

Help us better support you by completing our on-line

registration today!

Have the serial number of your Rino 130 handy and

connect to our web site (www.Garmin.com). Look for the

Product Registration link on the Home page. Also, be sure

to record your serial number in the area provided below.

NOTE: If you have previously registered a Garmin

product purchase, we invite you to re-register using our

NEW on-line system. Many services provided by our new

product registration system are now being automated and

re-registering your purchase ensures you the best possible

support from Garmin.

Serial Number:

Why should you register your

Garmin GPS unit:

• Notiﬁ cation of New Products

• Lost or Stolen unit tracking

Software License

Agreement &

Registration

190-00284-00_Prelim_FCC.indd vii 9/18/2003, 3:50:44 PM

viii

Preliminary

Saving as a Waypoint............................31

The Find ‘N Go Menu.............................31-37

Finding a Waypoint...............

........

........32

Finding a Contact..................

........

........32

Finding a City..........................................33

Finding an Exit....

...........

.................33-34

Finding a Point of Interest................34-35

Finding an Address or Intersection...35-36

Finding a Last Found Place....

......

........37

Using a Goto.........

.......

................................38

Routes Page.............................................39-44

Creating and Using A Route..................39

Editing a Route................................40-42

d/Edit fr

om the Route Map P

age.

42-43

Navigating a Route............................43-44

Tracks Page....................

.........

.................45-46

Proximity Page.........................

....

.................47

Satellite Page..................

.........

.................48-50

Setup Pages...................

............

...............51-56

Time Page.............

..............

....................51

Units Page..........................................52-53

Display Page......

........................

..............54

Heading Page..........................................54

Interface Page.....

..............

......................55

System Page.............................................56

Calendar Page..............

...........................

.....57

Alarm Clock Page..............

......................

.....58

Calculator Page.............

...........................

.....58

Stopwatch Page..............

.........................

.....59

Sun and Moon Page.....................................60

Hunt and Fish Page......................................60

Area Calculation Page....

..........................

.....61

Games Page.........................

..................

...62-63

Introduction

About This Manual.............................................i

FCC Compliance Statement...............................ii

FCC Licensing for GMRS...............................ii-iii

Warnings and Precautions.............................iii-v

Warranty...........................................................vi

Software License Agreement.............................vii

Product Registation..........................................vii

Table of Contents............................................viii

The Main Pages

Unit Overview ....................................................1

Radio Page

The Main Page..................................................2

Status Bar....................................................3

My ID......................................................3-4

Channels and Codes................................4-5

Scan and Montior....................................5-6

Setup Radio.............................................7-8

Informational Picture.............................9-10

Peer-to-Peer..........................................11-13

Map Page

The Main Page..................................................14

Zooming In/Out......................................15

Map Page Options...................................16

Panning the Ma

p ..................................17

Stop Navigation......................................18

Show........................................................18

Data Fields..............................................18

Map Page Setup..................................19-20

Measure Distance....................................20

Navigation Page

The Main Page..................................................21

Navigation Page Options...................22-23

Data Fields..............................................23

Trip Computer Page

The Main Page.............................................24-25

Main Menu Page

The Main Page..................................................26

Using the Main Menu............................27

Marking Your Location as a Waypoint......28

Creating a Waypoint.................................29

Projecting a Waypoint..............................30

Editing Waypoints..

....................

.............30

Appendices

Appendix A: What is FRS?....................................64

Appendix B: Speciﬁ cations..................................66

Appendix C: Accessories......................................67

Appendix D: MapSource Setup...........................68

Appendix E: Troubleshooting.........................69-70

Appendix F: Data Field Deﬁ nitions..................71-72

Appendix G: Wiring Diagram..............................73

Appendix H: Frequency Chart.............................74

Index............................................................75-76

Table of Contents

190-00284-00_Prelim_FCC.indd viii 9/18/2003, 3:50:45 PM

Preliminary

Main Pages

Features

Rino 130 - Overview

The Rino 130 (Radios Integrated with Navigation for

the Outdoors) is a 7.6 ounce, 12 channel GPS-enabled

handheld device with integrate radio functionality to pro-

vide two-way communications for up to two miles using

14 FRS (Family Radio Service) and 8 high-performance

GMRS (General Mobile Radio Service) channels for up to

ﬁ ve miles. You can keep track of up to 50 other contacts

from other Rino users.

The Rino 130 has seven keys located on the unit that

allow the user to quickly access all of the units functions.

The Rino 130 has a 160 X 160 pixel, 4 level gray mono-

chrome display for easy viewing.

The Rino can store up to 500 waypoints with a 10-

character name and graphic symbol. The active track log

will store up to 3000 points and allow you to save up to

20 tracks with 250 points per track.

Built-in cartography of a North American base map

that includes Interstate and State Highways and Exit

Information. Using MapSource™, Garmin’s map data

software (not included), you could choose to have the

Rino 130 display up to 8MB of a variety of different

map information. We currently offer several mapping

options that are compatible with the Rino 130 includ-

ing our MetroGuide, Topo, Fishing Hot Spots, and

BlueChart data. Check your local dealer or our web site

(www.Garmin.com) for a complete listing of MapSource

products.

Garmin designed your Rino 130 with the user in

mind. The Rino 130 is waterproof to IPX7 standards and

is rugged enough to endure the most trying use, and

Garmin’s friendly user interface will allow you to start

navigating with your new GPS in no time. Your Rino 130

can provide one more critical beneﬁ t, peace of mind.

With your Rino 130 you will know where you are, where

you’ve been and where you’re going. And since you’ll

always know the way back home, you can concentrate on

what you set out to do, explore the great outdoors.

190-00284-00_Prelim_FCC.indd 1 9/18/2003, 3:50:45 PM

Preliminary

Radio Page - Overview

The Radio Page is the ﬁ rst of the default Main Pages.

This page provides the user interface for FRS (Family Radio

Service) and GMRS (General Mobile Radio Service) radio

operations. Use this page to control and setup the radio,

view current settings and see informational graphics of the

radio’s operation.

The ‘My ID’ ﬁ eld allows you to customize a name and

chose a symbol that will appear on other Rino units as you

communicate with them.

The Rino has a total of 22 channels and 38 squelch

codes to select from using the ‘Channel’ and ‘Code’ ﬁ elds.

Channels 1-14 are for FRS and 15-22 are for GMRS. GMRS

(disabled by default) frequencies are regulated by the FCC

(Federal Communications Commission). In order to trans-

mit on these frequencies, you are required to obtain a license

from the FCC (see pg. ii-iii). The ‘Scan’ option allows you to

scan through the channels for voice activity. The ‘Monitor’

option lets you monitor a single channel for any activity,

including static and weak voice signals. You might choose

this option if a signal is getting out of range or weak.

The Informational Picture on the bottom half of screen

features Garmin’s Mr. Mark Waypoint to show current GPS

& radio status (see pg. 9) and radio actions. As you operate

the unit, the graphics will change depending on what ac-

tions you are taking or unit settings.

The Status Bar at the top of the page will show icons for

current radio settings and operation. The Options Menu, on

the right side of the Status Bar, has settings for Setting up the

radio, deﬁ ning a scanlist, and turning the GPS or radio On/

Off. The Main Page Menu, on the far right side of the Status

Bar, allows you to jump to any of the available Main Pages.

The Rino buttons (Except the TALK key) may be key-

locked in order to avoid unwanted keypresses.

To lock/unlock the keys :

1. Press IN and hold the CLICK STICK to access the

Shortcut Menu, then highlight ‘Enable Keylock’ and

press IN. To unlock, press and hold the PAGE key until

‘Keylock Disabled’ is displayed (about 5 seconds)

Radio Page

The Main Page

Radio Page

Hold PAGE to release the

keylock.

190-00284-00_Prelim_FCC.indd 2 9/18/2003, 3:50:46 PM

Preliminary

Status Bar - Overview

The Status Bar at the top of the screen will display

on all the available Main Pages. As you move around

any Main Page or change pages, the current page’s title

will brieﬂ y display for 3 seconds then be replaced by the

Status Bar. You will see current settings and operational

icons on the Status Bar as you operate the unit. The avail-

able icons are:

Radio Page

Battery Full (Each bar represents 1/4 charge)

Battery 1/2 charge

Battery Empty

Using External Power

Receiving Radio Transmission

Transmitting Radio Transmission

Backlight On

Radio On

Peer-To-Peer On/Location Ready to Send

Keylock On

Alarm Clock On

GPS On and Position Ready

GPS On, Position Not Ready

Status Bar

My ID and Symbol Fields - Overview

The ‘My ID’ ﬁ eld allows you to enter a name and

symbol that will appear on other Rino units as you com-

municate with them. You may enter a name using up

to a combination of 10 letters, numbers or spaces. The

Symbol ﬁ eld allows you to choose a face icon from a list

to further personalize your ID.

To enter a name:

1. Using the CLICK STICK, highlight the ‘My ID’

ﬁ eld and then press the CLICK STICK key IN.

This will activate the ﬁ eld and display the keyboard.

My ID Field

Symbol

Status Bar

190-00284-00_Prelim_FCC.indd 3 9/18/2003, 3:50:47 PM

Preliminary

Radio Page

2. Move the CLICK STICK Up, Down, Left or Right

to highlight the ‘Clear’ ﬁ eld, then press IN on the

CLICK STICK to clear the default ‘Name’ ID.

3. To enter a new ID, press the CLICK STICK Up,

Down, Left or Right to move the cursor to the desired

letter, number or a space, then press IN on the

CLICK STICK to select that highlighted character.

You may enter up to 10 characters for your ID.

You will also see a highlight cursor in the ‘My ID’

ﬁ eld showing your current entry position in that ﬁ eld.

Choosing ‘Back’ will delete the character to the left

of the cursor. Use the left or right arrow symbols to

move the highlight in the ID ﬁ eld.

4. When you have entered your new ID, use the CLICK

STICK to highlight ‘OK’ and then press

IN on the CLICK STICK.

Changing the user symbol:

1. Using the CLICK STICK, highlight the face symbol

to the right of the ‘My ID’ ﬁ eld and then press the

CLICK STICK key IN. This will show a list of

available face icons.

2. Move the

CLICK STICK Up or Down to scroll

through the selections. Since not all the selections

can ﬁ t in the window, you will see a slider bar on the

right side indicating your current position in the list.

3. Once you have highlighted the desired icon, press IN

on the CLICK STICK.

Channel and Code - Overview

The Rino has a total of 22 channels and 38 squelch

codes to select from using the ‘Channel’ and ‘Code’ ﬁ elds.

Channels 1-14 are for FRS and 15-22 are for GMRS

(disabled by default). To communicate with other Rino

and FRS/GMRS users, you must be on the same Channel

and Code. Garmin Rino units will work with 3rd party

FRS/GMRS radios, provided the other radios use standard

FRS/GMRS frequencies. A chart of the Rino frequencies

may be found in Appendix H.

Squelch codes allow you to hear calls from only speciﬁ c

persons. Thirty-eight Squelch Codes (called Continuous

Tone Controlled Squelch System or CTCSS) allows your

Rino to ignore unwanted calls from other persons who are

My ID /

Channels & Codes

Changing the user symbol

Select from FRS channels

1-14 or GMRS 15-22.

190-00284-00_Prelim_FCC.indd 4 9/18/2003, 3:50:47 PM

Preliminary

Radio Page

using the same channel. Simply select the same squelch

code (number) as selected by the other person(s) you

desire to communicate with. NOTE: Squelch codes do

not cause your conversation to be private. They only

allow you to ﬁ lter out other users on the same chan-

nel, so you only hear the radios you want to. Squelch

Codes are not a scrambling system! Setting the code to 0

(squelch code off) will allow you to hear all activity on the

selected channel, but you must be set to the same code

as the other person(s) to transmit back. See Appendix H

for a table listing all of the 38 Squelch Codes and their

frequencies.

As you change the main channels, the Rino will

remember the last channel/squelch code combination

that you were using. For example, you may set the unit

to Channel 5, squelch code 21, then change the main

channel to 8 and that code to 2. If you change the chan-

nel back to 5, the squelch code will change back to its

previous setting of 21.

See Appendix A for more information on FRS/GMRS

and its operational aspects.

To change the Channel and/or Code:

1. Using the CLICK STICK, highlight the ‘Channel’

or ‘Code’ ﬁ eld and then press the CLICK STICK

key IN. This will show a list of available channels/

codes.

2. Move the

CLICK STICK Up or Down to scroll

through the selections. Since not all the selections

can ﬁ t in the window, you will see a slider bar on

the right side indicating your current position in the

list.

3. Once you have highlighted the desired selection,

press IN on the CLICK STICK.

Scan and Monitor - Overview

The ‘Scan’ option allows you to scan through the

available channels for voice activity. As the unit scans and

receives a signal (or if you transmit), it will stop on that

channel/code for a few seconds, then continue scan-

ning. You may also use the Set Scanlist option to pick

which channels/codes to scan. Since it can take time to

Channels & Codes

/ Scan & Monitor

Choose from 38 squelch

codes. Setting the unit

to zero will allow you to

hear all transmissions

on that channel, but you

must be on the same code

to radio back.

The Code ﬁ eld will go

blank when the unit is

scanning channels.

190-00284-00_Prelim_FCC.indd 5 9/18/2003, 3:50:48 PM

Preliminary

scan through the all the channels, selecting only speciﬁ c

channels/codes will decrease the scan time. Decreasing scan

time will help prevent the chances of missing a transmis-

sion. The Scanlist also has Option Menu choices to ‘Scan

Current Codes’ or ‘Scan All Codes’. Choosing ‘Scan Current

Codes’ will scan only the Channel and Code combination

in memory

The ‘Monitor’ option lets you listen to a single channel

for any activity, including static and weak voice signals.

The Rino series will automatically squelch a frequency to

ﬁ lter out unwanted noise. Using the Monitor option will

temporarily turn off the automatic squelch allowing you

to hear the open channel. If you see a broken transmission

symbol (see pg. 9), you may be receiving a signal too weak

to trigger the unit’s squelch. You might choose this option

if a signal is getting out of range or weak.

To Scan or Monitor a channel(s):

1. Using the CLICK STICK, highlight the ‘Scan’

or ‘Monitor’ button and then press the CLICK

STICK key IN. ‘Scan’ will start searching through the

available channels. ‘Monitor’ will open the channel

in order to listen to any radio transmissions on that

channel.

2. To stop using either option, highlight the button with

the CLICK STICK and press IN.

To Setup a Scanlist:

1. Using the CLICK STICK, highlight the Options

Menu on-screen button and press IN. Highlight

‘Setup Scanlist’ and press IN on the CLICK

STICK.

2. To add/remove a channel from the list, highlight

the channel and press IN on the CLICK STICK to

add/remove the check mark in from of the name.

Only channels that are checked will be scanned.

3. To Select/Clear All channels, highlight either the

‘Select All’ or ‘Clear All’ buttons and press IN on the

CLICK STICK.

4. To ‘Scan All Codes’ or ‘Scan Current Codes’, highlight

the Options Menu and press IN on the CLICK STICK.

Choose the desired setting and press IN on the

CLICK STICK.

Radio Page

Scan & Monitor

The Code ﬁ eld will go

blank when you monitor

a channel.

190-00284-00_Prelim_FCC.indd 6 9/18/2003, 3:50:49 PM

Preliminary

Radio Page

The Radio Page Options Menu provides the following:

Setup Radio, Setup Scanlist, Turn Radio Off/On and

Turn GPS Off/On.

To access the page Options Menu:

1. Highlight the Option Menu on-screen button at the

top of the display screen and then press IN on the

CLICK STICK to open the menu.

2. Highlight the desired option on the menu and then

press IN on the CLICK STICK to activate the option.

3. To close without making a selection, move the

CLICK STICK to the right.

Setup Radio - Overview

The ‘Setup Radio’ option displays the Radio Setup

Page. This page determines how the radio will function,

changes audible alerts and enables you to adjust the radio

operation to your needs.

Setup Radio - Options

The following options are available:

Call Tone - When the CALL button is pressed, an atten-

tion tone is transmitted. This option allows you to choose

from one of ten tones.

Roger Tone - When the TALK key is released, a tone is

sent to signify the end of the transmission. This option

allows you to choose from one of four tones, or set the

tone to ‘Off’.

Ring Tone - When an incoming transmission is received,

an attention tone will sound. This option allows you to

choose from one of ten codes, or set the tone to Off. The

Ring tone will not sound again until there has been 45

seconds of radio inactivity.

Vibrate - Choose from ‘On’ or ‘Off’ to have the unit

vibrate when an incoming transmission is received. Once

received, the unit will not vibrate again until there has

been 45 seconds of radio inactivity.

Headset Type - Allows you to choose which accessory

headset or microphone you are using with the unit, or

have the unit automatically detect the type. If using more

than one type of headset or microphone, you will need

If the headset has a PTT

(Push To Talk) button, this

must be pressed in order for

the unit to detect the headset.

Setup Radio

Radio Page Options Menu

Radio Setup Page

190-00284-00_Prelim_FCC.indd 7 9/18/2003, 3:50:50 PM

Preliminary

to set the unit to ‘Ask When Detected’ before changing

accessories.

VOX Level - Controls the sensitivity level of any Voice

Operated Transmission (VOX) accessory. VOX accessories

allow you to use the unit hands-free. A lower VOX setting

is recommended for quiet environments while a higher

VOX setting should be used in noisy environments.

Setting the VOX level to 5 is recommended for most

environments, but it may be necessary to adjust the level

to achieve the desired voice trigger level. You will hear

yourself talking in the headset when transmitting success-

fully using VOX.

Send Location - This option enables/disables the peer-

to-peer positioning feature. See page 11 for more on this

feature.

GMRS Radio - Use this option to turn On/Off GMRS

channels 15-22. Peer-to-peer transmissions are not avail-

able on GMRS channels. See page 2 for more information

on using GMRS channels.

Scramble - This feature adds a level of security to your

conversations with other Rino 130 users only. When On,

the voice transmission will sound garbled to other non-

scrambled Rinos, as well as other 3rd party radios. When

set to On, in order for peer-to-peer and Send Location

(see pg. 11) features to work, the receiving radio must

also have Scramble enabled.

To use Setup Radio options:

1. Select ‘Setup Radio’ from the Options Menu and

then press IN on the CLICK STICK to display the

Map Setup Page.

2. Highlight an option on the page and press IN on

the CLICK STICK to display the options list for that

feature.

3. Use the CLICK STICK to highlight the desired

selection and then press it IN to activate.

4. Press the PAGE button or the on-screen ‘X’ button

to return to the Radio Page.

Setup Radio

Radio Page

Selecting a Ring Tone.

Tone will sound when you

press IN to accept it.

You must obtain a license

to operate on GMRS

channels 15-22.

190-00284-00_Prelim_FCC.indd 8 9/18/2003, 3:50:50 PM

Preliminary

Informational Picture - Overview

The Informational Picture on the bottom half of screen

features Garmin’s Mr. Mark Waypoint to show current

GPS & radio status and radio actions. As you operate the

unit, the graphics will change depending on what actions

you are taking or the unit settings.

Four satellites are shown on at the top of the picture

along with descriptive text to indicate GPS reception

status. As the unit collects satellite information, the satel-

lite symbols will ﬂ ash alternately until all four are steady

indicating a 3D position ﬁ x. The more satellites that are

steady, the better your position ﬁ x.

As radio signals come in, signal wave symbols will

display to the left of Mark Waypoint. Fragmented (or

broken) signal symbols are shown to indicate activity on

that channel. Audio remains muted because the incoming

signal does not match the squelch code your unit is set to.

The Mark Waypoint ﬁ gure will display several dif-

ferent icons, depending on what you are doing. A radio

in Mark’s hand indicates the radio is ready to use. A ﬂ ag

in his other hand means the unit is ready to transmit its

position (GPS must be On to use this feature.) As you

transmit, you will see radio waves around Mark’s radio.

When your peer-to-peer transmission is sent, Mark will

raise the ﬂ ag in his hand. As positions are received, a ﬂ ag

will brieﬂ y appear on top of the hill to the left.

See the following illustrations for more information:

GPS and Radio On;

Ready to transmit Position

Radio Page

Informational

Picture

GPS and Radio On;

Ready to transmit Position;

Transmitting on FRS

Mark Waypoint

Informational Picture

190-00284-00_Prelim_FCC.indd 9 9/18/2003, 3:50:51 PM

Preliminary

Radio Page

Informational

Picture

GPS and Radio On;

Ready to transmit Position;

Receiving transmission

GPS and Radio On;

Position transmitted

GPS and Radio On;

Ready to transmit Position;

Position received from

other Rino user

GPS Off; Radio On;

Position sending not

available

GPS On and Radio Off;

GPS operation only

GPS and Radio On;

Ready to transmit Position;

Activity on channel that

does not match code.

GPS and Radio On;

Position not ready;

Transmitting on GMRS

190-00284-00_Prelim_FCC.indd 10 9/18/2003, 3:50:52 PM

Preliminary

Peer-to-Peer - Overview

The Rino’s most unique feature is being able to send

it’s location to another Rino, this is called Peer-to-Peer po-

sitioning. With peer-to-peer enabled (see pg. 8) and you

have a GPS position (see pg. 48), whenever you press and

release either the CALL key or the TALK key, the Rino

will automatically send out its location. This information

will be available to all other Rino users that are monitor-

ing the same channel and code. This feature allows you to

track the movement of other Rino users and even navigate

to their location. Locations may only be sent once

every 10 seconds, due to FCC restrictions.

To transmit your location to other Rino

users:

1. With ‘Send Location’ enabled (see pg. 8), press and

release either the TALK or CALL buttons. You will

see a ﬂ ag on the top Status Bar or in Mark’s hand

when the unit is ready to transmit its position.

New Contact Page - Overview

The ﬁ rst time that a signal is received from another

Rino user, a ‘New Contact’ page will be displayed. From

the New Contact page you can show their location on

your map, ‘Goto’ their location, or select ‘OK’ to add

them to your contact list. The Rino can manage up to 50

contacts at any time. Each time that you receive a signal

from a contact, your map will be updated showing their

new position and a Track Log of their movement will

be created and shown on your map (see pg. 45). After a

contact has been established, a “<contact name> Updated”

message will brieﬂ y appear at the bottom of your display

each time the contact updates. You may also review each

contact’s information such as Direction, Elevation, Time-

stamp, Location and enter Notes up to 30 characters.

All contacts are listed on a Contact List Page and also

displayed in the Contact Bar on the Map Page (see pg.

14). Contacts behave like and count towards the 500

maximum waypoint total.

Radio Page

Peer-to-Peer /

Contacts

New Contact Page

Name &

Symbol

Contact

Information

Field

190-00284-00_Prelim_FCC.indd 11 9/18/2003, 3:50:53 PM

Preliminary

To accept a new contact:

1. When a new contact is received, the New Contact

page will appear. Highlight ‘OK’ and press IN on the

CLICK STICK. If you do not OK the contact, it will

not be saved.

To review a contact and contact details:

1. From the Map Page, highlight the desired contact of

the Contact Bar and press IN on the CLICK STICK.

As you highlight the contacts on the Contact Bar,

the Map page will center the map on that contact

and display its name, direction and distance near

the top of the screen.

2. Press the CLICK STICK IN and hold it until the

Shortcuts Menu is displayed.

3. Highlight ‘Find ‘N Go’ and press the CLICK STICK

IN.

4. Highlight ‘Contacts’ and press the CLICK STICK IN.

5. From the Contacts List, select the desired contact

and press the CLICK STICK IN.

6. If the contact did not have a GPS location on the

last transmission, a ? mark will appear below the

ﬂ ag. To view the contact details, highlight the details

ﬁ eld and press LEFT or RIGHT on the CLICK STICK to

change to the next data ﬁ eld.

To change contact details:

1. The Elevation, Position and Note ﬁ elds may all

be manually edited. Select the desired ﬁ eld and

press IN on the CLICK STICK. For Notes, highlight

‘Edit’ and press IN to start entering data, up to 30

characters. For other ﬁ elds, highlight the ﬁ eld and

press IN on the CLICK STICK to start changing the

data. Highlight ‘OK’ and press IN when done.

To view a contact on the Map Page:

1. From the Contact Review Page, highlight ‘Map’

and press IN on the CLICK STICK. Press PAGE when

done to return to the Contact Review Page.

Radio Page

Contacts

Contacts will also show on

the Map Page. Highlight

the contact and the map

will center on their last

position.

Contact Bar

Move LEFT or RIGHT on

the CLICK STICK to view

different contact data.

190-00284-00_Prelim_FCC.indd 12 9/18/2003, 3:50:53 PM

Preliminary

Send Location - Overview

Another feature is the ability to send a speciﬁ c location

to other Rino users. This can come in handy if you are

trying to round-up the group, or just want to meet at a

speciﬁ c location. You may send any point found from

the Find ‘N Go menu. If the unit needs to wait until 10

seconds have elapsed since the last position transmission,

a “Waiting to send location...” message will appear until

the unit is able to transmit. If a location is sent more than

once, a number will automatically be added to the end of

the name (CAMP, CAMP 1, CAMP 2, etc.).

To send a location:

1. Press the CLICK STICK IN and hold it until the

Shortcuts Menu is displayed.

2. Highlight “‘Find ‘N’ Go’” and press the CLICK

STICK IN.

3. Highlight the desired category and press the CLICK

STICK IN. ( For the Contacts List, select the desired

contact and press the CLICK STICK IN.)

4. Depending on which category you select, highlight

the desired item and press IN on the CLICK STICK to

display the Information page for that item.

5. From the Information Page, highlight the Options

Menu in the upper right and press IN on the CLICK

STICK.

6. Highlight ‘Send Location’ and press IN again. The

unit will now send the point to the other Rino users

on your channel/code. If using the Scramble feature,

receiving radios must also have Scramble enabled.

Radio Page

Send Location

To send a location, high-

light the Options Menu

from the Waypoint Review

Page and press IN.

Choose ‘Send Location’

and press IN.

190-00284-00_Prelim_FCC.indd 13 9/18/2003, 3:50:54 PM

Preliminary

The Map Page displays your present position and

direction of movement using a triangular ‘Position Icon’

that is centered on the map. As you travel the map display

leaves a “trail” (track log) of your movements.

The map also displays geographic details such as

rivers, lakes, highways, and towns. The map shown

above displays a higher level of detail than the basemap

provided with the unit (i.e. residential streets, parks, etc.),

because Garmin MapSource data has been downloaded to

the unit using a CD-ROM mapping program.

On the right side of the Map Page, you can choose to

show either the Contact Bar (see also pg. 12), Data Fields

or show the Map Only. As you highlight the contacts on

the Contact Bar, the Map page will center the map on that

contact and display its name, direction and distance near

the top of the screen.

To view a Contact from the Map Page:

1. Highlight the Contact Icon using the CLICK STICK.

Press IN if you want to view the details of the

Contact.

2. Press to the LEFT or RIGHT on the CLICK STICK in

order to recenter the map on your current position.

Map Page

Main Page

Status Bar

Option Menu & Main

Page Menu Buttons

Position Icon

Map Scale

Map Page with

Contact Bar

Map Page with Data

Fields

190-00284-00_Prelim_FCC.indd 14 9/18/2003, 3:50:55 PM

Preliminary

Map Page

Main Page

Map Features

Accuracy Circle

Panning Arrow

(Map Pointer)

Press DOWN to Zoom In

Press UP to Zoom Out

Map Scales

To allow you to view the map from different perspec-

tives, the scale can be changed from 20 feet to 500 miles.

The CLICK STICK and Z (Zoom) button on the front

right of the unit allow you to zoom in or out on the map.

Pressing the Z (Zoom) button from any page (other than

the Map Page) will automatically take you to the Map

Page. A lower zoom scale displays less area but more map

detail, while a higher zoom scale shows you a larger area

with less map detail.

To change scales on the Map Page:

1. Use the CLICK STICK and Z (Zoom) button to

change the map scale in order to show more map

area with less detail or less map area with more

detail.

2. Press and hold UP or DOWN on the CLICK STICK to

zoom the map scale rapidly.

The map scale in the lower left hand side of the

display is shown in units of measurement selected in the

‘Units’ ﬁ eld of the Unit Setup Page (not to be confused

with the Map Setup Page). If you zoom in so far that the

resolution of the map data is exceeded and the appear-

ance of the map is no longer accurate, the word, “over-

zoom” displays just below the map scale.

In many instances the map displays an ‘Accuracy

Circle’ surrounding the ‘Position Icon’. The Rino 130

uses both map resolution and GPS accuracy in deﬁ ning

your location to a point within the circle. The smaller the

circle, the more accurate your location.

When using the ‘Pan Map’ feature, a small outline

arrow (Map Pointer) can be moved about the page to

highlight and identify map items or to scroll the map to

view areas not shown on the display screen.

Four optional Data ﬁ elds on the right side of the page

can be programmed to provide a variety of travel and

navigation information.

More detailed map features as well as information

about those features can be downloaded to the unit from

a Garmin MapSource CD-ROM. When using MapSource

data, the word ‘mapsource’ displays below the map scale

whenever you zoom in to view map details.

190-00284-00_Prelim_FCC.indd 15 9/18/2003, 3:50:55 PM

Preliminary

Map Page Options Menu

with ‘Pan Map’ selected.

When no active navigation

is being used ‘Stop Naviga-

tion’ displays in gray..

On-screen Map Page

Options Menu button

Map Page options allow a variety of operating and

custom features for your Rino 130.

The Map Page options are:

Pan Map - Allows you to move the Panning Arrow

(Map Pointer) about on the map.

Stop Navigation - Stops navigating to a destination.

Show... - Allows you to choose to show either the

Contact Bar (see also pg. 12), four programmable

Data Fields or show the Map Only. As you highlight

the contacts on the Contact Bar, the Map page will

center the map on that contact and display its name,

direction and distance near the top of the screen.

Choosing either Contact Bar or Data Fields reduces

the map area.

Setup Map - Displays the Setup Map Pages, which al-

lows you to tailor the map to your requirements such

as changing text size, map orientation, and map detail.

Measure Distance - Displays the distance from one

point on the map to another.

Restore Defaults - Returns the Map Page to the

original factory settings (defaults).

To select a map page option:

1. Highlight the Option Menu on-screen button at the

top of the display screen and then press IN on the

CLICK STICK to open the menu.

2. Highlight the desired option on the menu and then

press IN on the CLICK STICK to activate the option.

3. To close without making a selection, move the

CLICK STICK to the left or right.

Map Page

Options

The ‘Show..’ lets you

choose the layout of

the Map Page.

190-00284-00_Prelim_FCC.indd 16 9/18/2003, 3:50:56 PM

Preliminary

Map Page

Using the Pan Map Option

The Map Page pan function allows you to display an

arrow used to point at and identify items on the map,

and to move the map in order to view areas beyond the

current viewing area on the display.

The map panning function is activated from the Op-

tions Menu on the Map Page. The CLICK STICK moves

the panning arrow (also referred to as the map pointer)

in the desired direction on the map page. If the arrow

moves to the edge of the map display, the map also moves

to reveal more area and a busy hourglass appears by the

cursor while the data is drawn on the screen.

Whenever the panning arrow is placed on a map item,

the name of that item is highlighted. This feature applies

to waypoints, roads, lakes, rivers...nearly everything that

is displayed.

Pressing the CLICK STICK marks the arrow location

or displays the map item information page. An Options

Menu allows you to: send the location of that item,

project a waypoint from it, save it as a waypoint, set a

proximity circle around it, add it to a route, or view the

sun and moon phase or view hunt and ﬁ sh information

from it. On-screen buttons at the bottom of the page al-

low you to Goto the map item, display it on the map or to

select ‘OK’ and return to the Map Page.

When using the panning arrow, pressing and holding

IN on the CLICK STICK, then choosing ‘Find ‘N Go’

displays items with the panning arrow (map pointer) lo-

cation used as a reference point for nearest items instead

of your current location. Press the PAGE button to return

to the Main Map Page.

To ﬁ nd details about or Goto a map item:

1. Use the CLICK STICK to move the panning arrow

to the map item that you want to learn more about.

2. When the item’s name is highlighted, press IN the

CLICK STICK to display the Information Page.

3. Use the CLICK STICK to highlight and press the

‘Goto’ button on the page to navigate to the item.

Map Page with

Panning Arrow

Map Item

Information Page

Options

Highlighted Map Item

190-00284-00_Prelim_FCC.indd 17 9/18/2003, 3:50:57 PM

Preliminary

Map Page Stop Navigation

The ‘Stop Navigation’ option allows you to quit navigation

of a Goto, Route or Track in progress. When there is no active

navigation, the ‘Stop Navigation’ option is “grayed out” and is

non-functional.

To stop navigation:

1. Select ‘Stop Navigation’ and press IN on the

CLICK STICK.

Show...

The ‘Show...’ option allows you to view either navigation

data in a four ﬁ eld window on the right side the page or the

Contact Bar. When ‘Map Only’ is chosen, more map area is

displayed.

To show Contact Bar, Data Fields or Map Only:

1. Select ‘Show..’ from the option list and then press IN on

the CLICK STICK.

2. Choose the desired option and press IN on the

CLICK STICK.

Data Field Instructions

When ‘Show... Data Fields’ is selected, four optional Data

Fields on the right side of the page can be programmed to

provide a variety of travel and navigation information. A list

of the choices can be found below. Not all data types will be

available on every page.

To program a data ﬁ eld:

1. Use the CLICK STICK to highlight the data ﬁ eld and

then press IN to display the list of data options.

2. Highlight the desired option and then press IN on the

CLICK STICK to change the data ﬁ eld type.

Changing Data Fields.

‘Stop Navigation’ Option

Options

Bearing

Course

Current Destination

Current Distance

Current ETA

Current ETE

Elevation

Final Destination

Final Distance

Final ETA

Final ETE

GPS Accuracy

Heading

Location (lat/lon)

Location (selected)

Maximum Speed

Moving Avg. Speed

Odometer

Off Course

Overall Avg. Speed

Pointer

Speed

Sunrise

Sunset

Time of Day

To Course

Trip Odometer

Trip Time - Moving

Trip Time - Stopped

Trip Time - Total

Turn

Velocity Made Good

Vertical Speed

190-00284-00_Prelim_FCC.indd 18 9/18/2003, 3:50:58 PM

Preliminary

Map Page

The ‘Setup Map’ option displays the ﬁ ve Map Setup

Pages, each accessed by an on-screen button. A list of

options displays for the features listed. Scale options

indicate the zoom level at which Tracks, Tracks Logs, Map

Features, or Text Boxes display, allowing you to remove

map clutter and deﬁ ne map features.

Page Setup

Tracks Setup

Map Features

Setup

Text Setup

Page - Orientation:

‘Track Up’ or ‘North Up’; fixes the top

of the map display to the current track heading or to

a north heading.

Auto Zoom:

On or Off;

automatically scales the map

to display both your current location and the next

point to which you are navigating.

Detail:

Most, More, Normal, Less, or Least; controls

how much map detail you see. This setting only

applies to a map feature set to ‘Auto’. Those features

which have a specified scale or are turned ‘Off’ are

unaffected by this setting.

Lock on Road:

On or Off; available only if MapSource

Data is loaded; when ‘On’ the triangle icon locks to

the road that you are traveling.

Display Mode:

Land or Water; choice displays in light

color while the other displays in a dark color.

Tracks - Saved Tracks and Track Log:

Scale options;

‘Off’,

‘Auto’, or 20 ft.-500 miles, sets the maximum scale at

which the feature should appear on the screen. Some

types of data will display only to certain zoom scales.

Goto Line:

Bearing or Course.

Map Features - Points of Interest, Waypoints, Street

Label, and Land Cover,

Scale options;

‘Off’, ‘Auto’, or

20 ft.-500 miles, sets the maximum scale at which

the feature should appear on the screen. Some types

of data will display only to certain zoom scales.

Text - Points of Interest, Waypoints, Street Label, and

Land Cover,

Text sizes;

‘None’, ‘Small’, ‘Medium’, or

‘Large’

control the screen size of the name

MapSource Info - Show, Check box;

check mark

determines if map data is used or not. Options Menu

allows you to choose to show all, show none or show

specific MapSource Data. See also page 66..

Setup Options

Map Data

Setup

190-00284-00_Prelim_FCC.indd 19 9/18/2003, 3:50:59 PM

Preliminary

To use Setup Map options:

1. Select ‘Setup Map’ from the Options Menu and then

press IN on the CLICK STICK to display the Map

Setup Page.

2. Press UP or DOWN on the CLICK STICK to

highlight the desired sub-page button, which will

display the options list for that sub-page to the left.

3. Press LEFT (Pressing RIGHT will return you to the

sub-page buttons), then UP or DOWN on the

CLICK STICK to highlight a feature on the list and

press IN on the CLICK STICK to display the options

list for that feature. Pressing RIGHT will return you

to the sub-page buttons.

4. Use the CLICK STICK to highlight the desired

option and then press it IN to activate.

5. Press the PAGE button or the on-screen ‘X’ button

to return to the Map Page.

Measure Distance option

To use the Measure Distance option:

1. Select ‘Measure Distance’ from the Options Menu

and then press IN on the CLICK STICK to display

the Panning Arrow. You will see ‘Ref’ under the

arrow.

2. Use the CLICK STICK to move about on the Map

Page until you reach the point to which you want

to measure. A new ‘Map Pointer’ ﬁ eld displays

showing the location of the pointer and the

direction and distance from where you began the

measuring.

3. To begin measuring from a different point, press IN

on the CLICK STICK from the desired location.

4. To stop measuring, press the PAGE key.

Map Page

Setup Options

If you have more than one

type of MapSource data

loaded, you can quickly

choose to show one or the

other.

Measuring distance.

Map Pointer Field

190-00284-00_Prelim_FCC.indd 20 9/18/2003, 3:51:00 PM

Preliminary

The Navigation Page provides active guidance with a rotating compass ring that

shows your course over ground (track) while you’re moving and a bearing pointer to

indicate the current direction to your destination (bearing) relative to the course over

ground.

The Compass Ring does not function as a magnetic compass when you are station-

ary. Although the bearing to a point will be correct, you must be moving in order for the

compass functions to work properly. When you are moving, the heading is controlled by

the GPS receiver.

The Data Field the top of the page, by default shows you the name of your destina-

tion. All ﬁ ve Data Fields can be programmed to display a variety of navigation data.

The list of data ﬁ eld choices may be found on page 18 and deﬁ nitions may be found in

Appendix F.

While you are navigating a route, the pointer indicates the direction (a bent arrow)

of the turn to the next point in the route as well as the direction to the current point

when you get within 15 seconds ETA of the current point.

When you are not on an active Goto, Track or Route (in other words: not traveling

to a recorded destination), the window at the top of the page will be blank when ‘‘Desti-

nation’ is selected. The Compass Ring displays your heading while you are moving, but

the data ﬁ elds to the right of the page will not display any destination related data, such

as Estimated Time of Arrival.

Times to Destination

Straight Line Distance

to the Destination

Selectable Data Fields

Bearing Pointer

Compass Ring

Destination

(Waypoint) Name

The Main Page

Navigation Page

190-00284-00_Prelim_FCC.indd 21 9/18/2003, 3:51:00 PM

Preliminary

Navigation Page Options

The options include:

Stop Navigation - Cancels navigation (“Grayed

out” or disabled unless you are navigating on a Goto,

Track, or Route.)

Bearing Pointer/Course Pointer - Toggles between

Bearing (always directed at destination) and Course

(distinctive with dots across center of compass, shows

amount of correction needed to be back on course.)

Change Scale - Only appears when Course

Pointer is selected. Use the CLICK STICK to

change the CDI scale. Scale value appears in

the upper right area of the compass.

Show Data Fields/Big Compass - toggles to display

data ﬁ elds on the right side of the display or removing

the data ﬁ elds and showing a larger compass.

Restore Defaults - Returns options and data ﬁ eld

choices to factory designations.

To the right of the page are four data ﬁ elds (and one

on the top) that are user programmable with a choice of

different data options. See page 18 for details on changing

data ﬁ elds.

The Bearing Pointer and Compass Ring work inde-

pendently of the direction of your movement and the

direction to your destination. The Bearing Pointer always

points directly to the destination, no matter what your

current location might be.

For example: if the arrow is pointing straight up,

you are going directly to your destination. If it points

any direction other than up, turn and move towards

the direction the arrow is pointing until it points up

and then continue in that direction. If you are using the

‘Course Pointer’ option instead and you drift away from

the original line of travel to your destination, the Course

Deviation Indicator (CDI) provides graphic indication of

drift (right or left) and displays the distance off course.

Navigation Page with

Course Pointer and

Course Deviation Indicator

(CDI) Scale active.

Navigation Page

The Main Pages

Navigation Page with

Bearing Pointer and

Big Compass..

CDI Scale

190-00284-00_Prelim_FCC.indd 22 9/18/2003, 3:51:01 PM

Preliminary

To Setup the Navigation Page:

1. With the Navigation Page displayed, use the

CLICK STICK to highlight the Options Menu button

at the top of the page. Then press it IN to display

the menu.

2. Use the CLICK STICK to highlight your selection

and then press IN to select it.

To stop navigating:

1. Highlight the on-screen Options Menu button at the

top of the Navigation or Map Page and press the

CLICK STICK.

2. Select ‘Stop Navigation’, then press the

CLICK STICK.

To change data ﬁ elds:

1. Use the CLICK STICK to highlight the desired data

ﬁ eld and then press it IN to display the list of data

options.

2. Select the desired option from the list and press IN

on the CLICK STICK.

The list of data ﬁ eld choices may be found on page 18

and deﬁ nitions may be found in Appendix F.

Navigation Page

The Main Pages

Navigation Page

Options Menu

Navigation Page

Changing Data Fields

190-00284-00_Prelim_FCC.indd 23 9/18/2003, 3:51:02 PM

Preliminary

The Trip Computer Page default displays up to

seven different types of navigation data. Choosing ‘Big

Numbers’ will display 2 large data ﬁ elds. Each data ﬁ eld

is selectable and can contain one of many data informa-

tion options.

By selecting the information options that you prefer

and arranging them in a desired order on the page, you

can customize the Trip Computer Page to meet your

navigation needs.

The Options Menu allows you to reset the Trip Com-

puter data when you are ready to start a new trip, choose

between Big or Small Numbers and Restore Defaults.

Selectable Data Fields

Trip Computer Page

Main Page

Trip Computer Page

Trip Page shown with

Big Numbers

190-00284-00_Prelim_FCC.indd 24 9/18/2003, 3:51:02 PM

Preliminary

Trip Computer Page

The Trip Computer provides a variety of data ﬁ elds

with read-outs of current information as you travel.

Seven small or two large ﬁ elds display navigation

information and are user programmable. The default set-

tings for these ﬁ elds are shown in the illustration.

The list of data ﬁ eld choices may be found on page 18

and deﬁ nitions may be found in Appendix F.

The Option Menu for this page provides the fol-

lowing options: Reset, Big Numbers, and Restore

Defaults.

To program a data ﬁ eld:

1. Use the CLICK STICK to highlight the desired data

ﬁ eld and then press it IN to open the data ﬁ eld

Options Menu.

2. Use the CLICK STICK to move Up or Down the

menu to highlight a desired data option.

3. Press IN on the CLICK STICK to select the option

and place it in the data ﬁ eld.

To access the page Options Menu:

1. Use the CLICK STICK to highlight the Options

Menu on-screen button and press it IN to display

the Options Menu.

2. Highlight the desired option and then press IN on

the CLICK STICK to activate.

3. To activate individual ‘Reset’ options, highlight

the item on the list and then press IN on the

CLICK STICK to place or remove the check mark.

4. Once you check all the desired items to clear, reset,

or delete, highlight ‘Apply’ and press IN on the

CLICK STICK. You may also choose the ‘Select All’ or

‘Unselect All’ options accordingly.

NOTE: Use care when choosing the ‘Delete’

options, as all stored Tracks, Waypoints, and

Routes can be permanently deleted when reset-

ting the Trip Computer. Once deleted, items

cannot be recovered.

Reset Options Menu.

Useful when starting a new

trip to clear old data.

Data Field Options Menu

Trip Computer Page

Options

190-00284-00_Prelim_FCC.indd 25 9/18/2003, 3:51:03 PM

Preliminary

The Main Menu provides you with a directory of the Rino’s advanced features. From

the Main Menu page you can mark and create new waypoints; ﬁ nd map items such as

cities, interstate exits, addresses, points of interest, etc.; create routes; save tracks; setup

system operating features; access and use unit accessories or add/remove main pages

and adjust their ordering.

The Main Menu Page with

Feature Icons

Time/Date.

Page Sequence Setup

You may add, remove, or reorder any of the Main Pages, plus additional

pages. The default Main pages are Radio, Map, Navigation, Trip Computer,

and Main Menu. The Main Menu cannot be removed from the page sequence. If a page is

added to the Main Page Sequence, it will not appear in the Main Menu.

To move, insert or remove a Main Page:

1. From the Main Menu, highlight the Option Menu on-screen button and press the

CLICK STICK IN. Highlight ‘Page Sequence Setup’ and press IN.

2. To move a page in the order, highlight the page and press IN. Select ‘Move’, then

move UP or DOWN until the desired position is displayed and press IN.

3. To insert a new page, highlight the page you wish to insert it before and press IN.

Select ‘Insert’, then choose a page from the list and press IN on the CLICK STICK.

4. To remove a page in the order, highlight the page and press IN. Select ‘Remove’ and

press IN on the CLICK STICK.

To exit these pages, highlight the on-screen ‘X’

button and press IN on the CLICK STICK.

Main Menu Pages

Main Menu Page

Main Page

190-00284-00_Prelim_FCC.indd 26 9/18/2003, 3:51:04 PM

Preliminary

Using the Main Menu

The Main Menu provides access to additional Rino

feature pages. The pages listed below provide enhance-

ments to Rino operation. Press the PAGE button repeat-

edly to cycle to the Main Menu or select it from the Main

Page Menu at the top of each main page.

Mark Waypoint Page - Allows you to mark and store

a waypoint for your current location or a map pointer

location.

Find ‘N Go Menu - Allows you to locate, and Goto, or

use as part of a Route; Waypoints, Favorite Locations,

Cities, Interstate Exits, Points of Interest, Addresses, and

Intersections. (Some require MapSource data.)

Route Page - Allows you to create and store routes for

repeated use.

Tracks Page - Provides access to the track log, saved

tracks and contact tracks.

Proximity Page - Allows you to set a proximity alert

distance around contacts or waypoints.

Satellite Page - Provides a picture of the satellite signal

tracking and tells you when the unit is ready to navigate.

Setup Page - Allows tailoring of items such as time for-

mat, units of measure, display backlighting timeout and

contrast adjustment, heading selection, interface setups

and system software information.

Calendar Page - Provides you with a monthly calendar

with programmable reference notes.

Alarm Clock - Provides a settable 24-hour alarm clock.

Calculator - The calculator feature is available in two

forms, Standard or Scientiﬁ c.

Stopwatch Page - Allows you to use the unit as a stop-

watch, including a lap timer.

Sun & Moon Page -Shows a graphic display of both

the sun and moon locations at various times, dates and

locations.

Hunt & Fish Page -Provides you with a listing of best

times for hunting and ﬁ shing for a chosen location.

Area Calculation Page - Use this function to calculate

area as you move around.

Games Page - Games are provided as an entertainment

feature.

Inserting a page in the

Main Page Sequence.

Main Menu Page

Options

You may choose from a list

of items to add to the Main

Page Sequence.

190-00284-00_Prelim_FCC.indd 27 9/18/2003, 3:51:07 PM

Preliminary

The Mark (Waypoint) Page

The Mark Waypoint Page allows you to mark and

record your current location as a waypoint and appears

with a graphic name block (man with a ﬂ ag) that displays

the assigned number for that waypoint and a waypoint

symbol.

To mark your current location as a

waypoint:

1. Press IN and hold the CLICK STICK to access the

Shortcut Menu, then highlight ‘Mark Waypoint’

and press IN. You can also access this page by

highlighting the Mark Icon on the Main Menu Page

and then pressing IN on the CLICK STICK. It is

automatically assigned a 3-digit number.

2. To change the name of the waypoint, use the

CLICK STICK to highlight the waypoint name ﬁ eld.

3. To assign an identifying symbol to a waypoint, use

the CLICK STICK to highlight the symbol block just

above the waypoint name.

4. To view the waypoint details, highlight the details

ﬁ eld and press LEFT or RIGHT on the CLICK STICK

to change to the next data ﬁ eld.

5. To save the waypoint, highlight ‘OK’ and press IN

on the CLICK STICK.

6. If you do not want to save it as a new waypoint,

press the PAGE button before pressing any other to

cancel.

To create a waypoint using the map panning

arrow:

1. With the Pan Map feature active, move the panning

arrow (map pointer) to the map item you want and

highlight it.

2. Press IN and release the CLICK STICK to display

the item information page.

3. With the Information Page displayed, highlight the

Options Menu button at the top of the page and

then press the CLICK STICK to open the menu.

4. Highlight the ‘Save As Waypoint’ option and press

the CLICK STICK to save the map item as a

waypoint.

Mark Waypoint Page

Map Symbol List

Main Menu Page

Marking

Waypoints

Marking a Waypoint with

the Panning Arrow.

190-00284-00_Prelim_FCC.indd 28 9/18/2003, 3:51:07 PM

Preliminary

To create a waypoint using the panning

arrow when a map item is not highlighted:

1. With the Pan Map feature active, move the panning

arrow (map pointer) on the map to the location you

want to mark and then, press the CLICK STICK.

2. The Mark Waypoint Page displays, automatically

assigning a number to the waypoint.

Be certain to press and release the CLICK STICK

for this operation. Pressing IN and holding the

CLICK STICK displayed the Shortcut Menu.

To create a waypoint by manually entering

its coordinates (lat/lon):

1. Press IN and hold the CLICK STICK to access the

Shortcut Menu, then highlight ‘Mark Waypoint’ and

press IN or use the Find ‘N Go to view a previous

waypoint.

2. Highlight the details ﬁ eld and press LEFT or RIGHT

on the CLICK STICK to change to the Location ﬁ eld.

Press IN and enter the new coordinates using the

numerical keyboard. Highlight and press ‘OK’ when

ﬁ nished.

3. You may also change the waypoint name and/or

symbol or add notes.

To move a waypoint by dragging it:

1. Use the Find ‘N Go Menu to display the Waypoint

Page for the waypoint you want to move.

2. Highlight and press the ‘Map’ on-screen button to

display the map for the waypoint.

3. With the waypoint highlighted by the panning

arrow, press IN and release the CLICK STICK. The

word “Move” displays beneath the panning arrow.

4. Use the panning arrow to drag the waypoint

to the new location and then press IN on the

CLICK STICK to place it.

5. Press the PAGE button before pressing the

CLICK STICK to cancel moving of the waypoint and

return to the Main Pages.

Creating a

Waypoint by entering

coordinates.

Main Menu Page

Waypoints

190-00284-00_Prelim_FCC.indd 29 9/18/2003, 3:51:08 PM

Preliminary

Projecting a Waypoint

Projecting a waypoint from any map item (another

waypoint, etc.) allows you to establish a new waypoint on a

bearing and distance projected from that map item.

To project a waypoint:

1. Select a map item from the Find ‘N Go Menu.

2. Highlight the Option Menu on-screen button at

the top of the Information Page and press the

CLICK STICK IN to display the options. Highlight

‘Project Waypoint’ and press IN.

3. Highlight either the bearing or distance ﬁ eld, then

press the CLICK STICK IN to display the numerical

keyboard. Move from numeral to numeral pressing the

CLICK STICK to enter numbers, then highlight ‘OK’

and press IN to ﬁ nish.

Editing a Waypoint

A waypoint or contact can be edited to change the map

symbol, name, coordinates, elevation or add notes. It can

also be deleted.

To edit a waypoint:

1. Use the Find ‘N Go Menu to display the waypoint/

contact or highlight it on the Map Page and press IN.

2. To view the details, highlight the details ﬁ eld and

press LEFT or RIGHT on the CLICK STICK to change to

the next data ﬁ eld. To make changes to the waypoint

map symbol, name, location coordinates, elevation

ﬁ elds and notes, highlight the desired ﬁ eld and press

the CLICK STICK IN to display the keyboard. (For

Notes, highlight ‘Edit’ and press IN to start entering

data, up to 30 characters.) Highlight the desired

characters on the keyboard to enter new data and

then select ‘OK’ and press IN to close the keyboard.

3. Highlight the ‘OK’ button the press the CLICK STICK

to save the changes.

To delete a waypoint or contact:

1. Use the Find ‘N Go feature to display the point.

2. From the Highlight the ‘Delete’ button and then press

the CLICK STICK. Conﬁ rm the deletion.

Enter Distance and

Bearing to project.

Using the keyboard to edit.

Main Menu Page

Waypoints

190-00284-00_Prelim_FCC.indd 30 9/18/2003, 3:51:09 PM

Preliminary

To save Map or Find ‘N Go Menu items as

waypoints:

1. Access the Information Page for the desired item

(highlighted from the map or selected from the Find

‘N Go Menu).

2. Open the Options Menu at the top of the page,

select ‘Save As Waypoint’ and press IN on the

CLICK STICK to save the item to the Waypoints List.

3. Highlight the ‘Save As Waypoint’ option and press

Straight Down on the CLICK STICK.

The Find ‘N Go Menu

The Find ‘N Go Menu allows you to ﬁ nd stored

locations (waypoints) and map items (cities, exits, etc.).

They can be found by name or by those nearest to your

current location (Position Icon). If you are using certain

MapSource data, the list of ﬁ nd locations is expanded to

include categories for Points of Interest, Street Addresses

and Intersections. If an option is grayed out (disabled),

you will need to load map detail using MapSource to use

that option.

To access the Find ‘N Go Menu:

1. Hold IN on the CLICK STICK button to access the

Shortcut Menu. Highlight ‘Find ‘N Go’ press IN.

2. From the Main Menu, highlight ‘Find ‘N Go and

press IN on the CLICK STICK.

For some categories, there are two methods of list-

ing. The “By Name” list contains every item in the map

database for the selected category, while the “Nearest” list

contains only those items that are near to your Current

Location or the Map Pointer. Categories listed by either

method displays a choose prompt.

These pages are structured with a set of sub-menus and

location information pages that guide you through the

process of ﬁ nding locations. Use them to construct a

Route, establish a direct line of travel (Goto), or when

gathering information.

Find Page using your

current location as a point

of reference

Item Information Page

‘Near Map Pointer’ or ‘By

Name’ Prompt displays

when using Map Pointer

Find ‘N Go Menu

Main Menu Page

Find ‘N Go

190-00284-00_Prelim_FCC.indd 31 9/18/2003, 3:51:10 PM

Preliminary

Finding a Waypoint

Waypoints that you have created and stored in the Rino

can be found by selecting the “Waypoint’ option from the

Find ‘N Go Menu. You can ﬁ nd a waypoint from the list of

waypoints using the ‘By Name’ or ‘Nearest’ options as ex-

plained on the previous page. When selected from the list,

the waypoint displays on the Waypoint Information Page.

The Waypoint Information Page displays the waypoint

name or number, a map symbol, the location in lat/lon,

elevation, distance, bearing, and three on-screen buttons for

‘Goto’, ‘Map’, and ‘OK’ functions.

To ﬁ nd a waypoint:

1. Use the CLICK STICK to select the Waypoint option

from the Find List and then press it IN to display a

prompt to select ‘By Name’ or ‘Nearest’. Select, then

press the CLICK STICK IN to display the Waypoints

List.

2. Use the CLICK STICK to select the desired waypoint

from the list and then press it IN to display the

Information Page for that waypoint.

3. With the Information Page displayed, you can select

‘Goto’ to create a direct line of travel to the

waypoint. Select ‘Map’ to view the waypoint location

on the map or select ‘OK’ to close the page.

4. Use the Options Menu to send the location, add it to

an existing route, project a new waypoint from this

location, view sun and moon, and best ﬁ shing and

hunting time information for this waypoint.

Finding a Contact

Contacts that you have received in the Rino can be

found by selecting the ‘Contacts’ option.

1. Highlight ‘Contacts’ and press the CLICK STICK IN.

2. From the Contacts List, select the desired contact and

press the CLICK STICK IN.

3. If the contact did not have a GPS location on the last

transmission, a ? mark will appear below the ﬂ ag. To

view the contact details, highlight the details ﬁ eld and

press LEFT or RIGHT on the CLICK STICK to change to

the next data ﬁ eld.

Waypoint Information

Page

Waypoint Find List

Main Menu Page

Finding Items

190-00284-00_Prelim_FCC.indd 32 9/18/2003, 3:51:10 PM

Preliminary

Finding a City

Cities can be found by selecting the ‘Cities’ option

of the Find ‘N Go Menu, selecting the city from the list

of ‘Nearest’ or ‘By Name’, and then displaying the City

Information Page.

The City Information Page for the selected city dis-

plays the city name, the size by population, and distance

from your location. You can view it on the map or create

a Goto direct route to the city from your current location,

or from a location deﬁ ned by the Panning Arrow (Map

Pointer). You can also save it as a waypoint, or add it to

an existing route.

To ﬁ nd a city:

1. Use the CLICK STICK to select the ‘Cities’ option,

then press it IN to display the ﬁ nd ‘By Name’ or ﬁ nd

by ‘Nearest’ prompt. Selecting ‘By Name’ displays

the keyboard as an alternative scrolling through the

list of nearest cities.

2. If using ﬁ nd ‘By Name’, begin spelling the name

of the city by using the keyboard. When you have

entered enough characters to deﬁ ne the name, a

match list displays. If you are using ﬁ nd ‘By Nearest’

scroll through the list to ﬁ nd the city you want. Use

the CLICK STICK to select the desired city from the

list and then press it IN to display the Information

Page for that city.

3. With the Information Page displayed, you can select

‘Goto’, ‘Map’, or ‘OK’ options.

Finding an Exit

You can use the Find Exit option to locate a nearby

exit on an interstate highway. Exits are listed only by

‘Nearest’. Exit information pages provide a variety of

information about services near each exit, including rest

stops, lodging, restaurants, service stations, etc. Some

services (i.e. service stations) on this page can be selected

and a separate information page displays with speciﬁ c

information concerning what types of fuel, mechanical

and food services are available.

Find List for Nearest Cities

City Information

Page

Main Menu Page

Finding Items

190-00284-00_Prelim_FCC.indd 33 9/18/2003, 3:51:11 PM

Preliminary

To ﬁ nd an exit:

1. Use the CLICK STICK to highlight ‘Exits’ and then

press it IN to display the Exit List.

2. Highlight and select an exit type by pressing IN on the

CLICK STICK.

3. A list of exits nearest to you displays. The title box

indicates the interstate highway which is served by

the exits. Two ﬁ elds at the bottom of the page indicate

distance and bearing to the exit.

4. Scroll through the list to highlight the desired exit.

5. Press IN on the CLICK STICK to display the

Information Page for that exit. This page contains the

exit description with a list of available services near

that exit along with the distance and bearing ﬁ elds.

6. Use the CLICK STICK to move to the list of services

and highlight a selection from the list.

7. Press IN on the CLICK STICK to display the

Information Page for the selected service.

The Exit Services Information Page displays the name

of the service, its direction from the exit, and a list of

the services available, each marked by a check.

At the bottom of these Information Pages are on-

screen buttons for ‘Goto’, ‘Map’, and ‘OK’.

8. Use the Options Menu at the top of the page to save

the exit as a waypoint, send the location, project a

waypoint, or add to an existing route.

Finding a Point of Interest

You can use the Find Point of Interest option to locate

a nearby restaurant, lodging, landmark, public building,

park, etc. However, you must have transferred a MapSource

MetroGuide map to the unit map database. Otherwise, this

option, plus Address and Intersection options, are grayed

out and are not functional.

Here is a list of Point of Interest categories:

Food & Drink Services

Lodging Transportation

Attractions Emergency & Govt.

Entertainment Manmade Places

Shopping

List of Exit

Types

Exits List

Exit Information Page

Main Menu Page

Finding Items

190-00284-00_Prelim_FCC.indd 34 9/18/2003, 3:51:12 PM

Preliminary

In many instances, these categories are subdivided

into types, such as in the instance of Food & Drink.

When you select Food and Drink from the list of catego-

ries, you are then presented with a list of types which

includes ‘All Types’ and cuisine options such as American,

Asian, Barbecue, Chinese and many more.

Once you have selected an item, you can display the

Information Page for that item. You can then use the on-

screen buttons to ‘Goto’ or view the location on the ‘Map’;

or use the Options Menu for more choices.

To ﬁ nd a point of interest:

1. Use the CLICK STICK to highlight ‘Points of

Interest’ and then press it IN to display the Points of

Interest Categories List.

2. Use the CLICK STICK to select the desired category

and then press it IN to display the Types List.

3. Use the CLICK STICK to select the desired type and

then press it IN to display the list for that type.

4. Use the Options Menu at the top of page to select

from either ‘By Name’ or ‘Nearest’ options. Selecting

‘By Name’ displays a keyboard allowing you to

enter the characters of the name you want. A list

of matches displays when enough characters are

entered.

5. Use the CLICK STICK to highlight your selection

from the list and then press it IN to display the

Information Page for that item.

6. Use the on-screen buttons to ‘Goto’ or view on the

‘Map’, or use the page Options Menu.

Finding an Address or Intersection

You can enter a street number, choose a street name

from a list and ﬁ nd an address within the area of map

data coverage or enter two street names and locate the

intersection. To use these options, however, you must be

using a MapSource MetroGuide which provides this type

of map data.

Points of Interest List

Food & Drink Categories

Nearest Barbecue List

Main Menu Page

Finding Items

190-00284-00_Prelim_FCC.indd 35 9/18/2003, 3:51:13 PM

Preliminary

To locate an address:

1. Use the CLICK STICK to highlight ‘Address’ and

press it IN to display the ‘Find Address’ page.

2. Highlight the’ Number’ ﬁ eld and use the keyboard

for entering numbers.

3. Move to the ‘Street’ ﬁ eld using the CLICK STICK.

4. Press IN on the CLICK STICK to display the ‘Select

Street Name’ list. Find the street by using the

keyboard to enter characters until a list appears.

5. With the desired street highlighted, press IN on

the CLICK STICK to place the street name on the

Find Address page. Repeat this process for city and

postal codes, if desired. A window at the bottom of

the page displays a list of matches and the quality

of each match. You may also use the Options Menu

to ‘Clear City’, ‘Clear Postal Code’ or ‘Clear All’.

6. Use the on-screen buttons at the bottom of the

page to ‘Goto’, view the item on the ‘Map’, ’OK’ to

close, or use the Options Menu for other choices.

To locate an intersection:

1. Display the Find ‘N Go Menu and use the

CLICK STICK to highlight the ‘Intersection’

category and press it IN to display the ‘Find

Intersection’ page.

2. Highlight the ﬁ rst ’Street’ ﬁ eld and then press IN on

the CLICK STICK to display the ‘Street‘ list.

3. Enter the name of the street in the name ﬁ eld at

the top of the list using the keyboard data entry

method. Once you have spelled enough of the street

name, you a match displays, often with several

streets on the list. Press IN on the CLICK STICK to

move the highlight to the street list and then scroll

up or down until you ﬁ nd the street name you want.

Press it IN to place the name in the ﬁ eld.

4. Highlight the best match and then press IN on the

CLICK STICK to display the Information Page for

the intersection. Use the on-screen buttons at the

bottom of the page to ‘Goto’, view the item on the

‘Map’, ‘OK’ to close, or use the Options Menu for

other choices.

Entering an Address

Main Menu Page

Finding Items

Find Intersection Page

190-00284-00_Prelim_FCC.indd 36 9/18/2003, 3:51:14 PM

Preliminary

Finding a Last Found Place

You can use the Recently Found Places option to

locate Points of Interest, Cities, Waypoints or Contacts

and Intersections and other locations you have recently

retrieved. The process for ﬁ nding recent points from the

Find ‘N Go list is the same as ﬁ nding a regular waypoint.

To ﬁ nd a ‘Last Found Place’:

1. Use the CLICK STICK to select the ‘Last Found

Places’ option from the Find ‘N Go List and then

press it IN.

2. Press UP or DOWN on the CLICK STICK to

highlight the desired sub-page button, which will

display the options list for that sub-page (Points of

Interest, Cities, Waypoints/Contacts or Intersections)

to the left.

3. Press LEFT (Pressing RIGHT will return you to the

sub-page buttons), then UP or DOWN on the

CLICK STICK to highlight an item on the list

and press IN on the CLICK STICK to display the

Information Page for that item.

4. With the Information Page displayed, you can select

‘Goto’ to create a direct line of travel to the item.

Select ‘Map’ to view the waypoint location or select

‘OK’. For Waypoints and Contacts, you may also

choose to ‘Delete’ to permanently remove that item.

5. Use the page Options Menu to send the location of

that point, project a new waypoint from its location,

set a proximity circle, add the item to an existing

route, or view sun/moon or hunt/ﬁ sh position data

for this time and date.

Last Found Places Page

Main Menu Page

Finding Items

190-00284-00_Prelim_FCC.indd 37 9/18/2003, 3:51:14 PM

Preliminary

Using a Goto to Navigate to a Destination

The Goto function allows you to create a direct route

to a destination, (waypoint, city, or point of interest).

Once you have accessed the Information Page for an item,

use the Goto button at the bottom of the page to initiate

travel to a map item using the Map and Navigation Pages

for guidance.

To activate a Goto:

1. Use the Find ‘N Go Menu to access the Information

Page for any desired destination and use the

CLICK STICK to highlight the Goto button.

2. Press IN on the CLICK STICK to start navigation.

3. Observe the Navigation Page, it displays the name

of your destination, the distance from your current

location, and a Bearing Pointer indicating the

direction you should travel. The time required to

reach your destination displays when you begin to

travel and establish a predicted rate of movement.

The Data Fields to the right of the page display

information relative to your travel as appropriate for

the type of data selected to appear in those ﬁ elds.

4. Use the PAGE button or Main Page Menu to access

the Map Page and observe your movements and

a dark line indicating the direct path from your

current location to your destination.

5. Use the Bearing Pointer on the Navigation Page to

maintain travel in the right direction and observe

distance and time information to monitor your

progress.

6. When you are close to your destination, an “Arriving

at Destination” message appears. If you move past

the destination the Bearing Pointer reverses and the

distance display increases.

To stop navigating:

1. Highlight the on-screen Options Menu button at the

top of the Navigation or Map Page and press IN on

the CLICK STICK.

2. Select ‘Stop Navigation’, then press IN on the

CLICK STICK.

Information Page

Navigation Page

A Map Page Goto

Main Menu Page

Using a Goto

190-00284-00_Prelim_FCC.indd 38 9/18/2003, 3:51:15 PM

Preliminary

Creating and Using a Route

Route navigation allows you to create a sequence

of intermediate waypoints which lead you to your ﬁ nal

destination. The Rino stores 20 routes, each with up to 50

waypoints. A route can be created and modiﬁ ed from the

Route Page, and waypoints can be added to a route from

the Find ‘N Go Menu. More complex routes can be cre-

ated using a PC and MapSource mapping programs and

then transferred to the unit memory.

To create a route:

1. Access the ‘Routes’ page from the Main Menu. The

page has a ‘New’ button, a list of routes, and the

number of unused routes.

2. Use the CLICK STICK to highlight the ‘New’ button

and press it IN to display the route Setup Page.

3. With an empty row (dashed) in the route list

highlighted, press IN on the CLICK STICK to

display the Find ‘N Go Menu.

4. Use the Find ‘N Go Menu to select a route waypoint

from one of the Find ‘N Go Menu categories and

display the Information Page for the selected

waypoint, city, exit, point of interest, etc. Highlight

the on-screen ‘Use’ button and press IN on the

CLICK STICK to place it on the Routes List.

5. To add more waypoints to the route, repeat the

process in Steps 3 and 4. The route is named for the

ﬁ rst and last waypoints on the route.

You can add waypoints to the end of an existing route

at any time by using the Find ‘N Go Menu.

To add a Find ‘N Go Menu item to a route:

1. Select an item from the Find ‘N Go Menu and

display its Information Page. If a Contacts is used

in a route, the route will change as the Contact’s

position is updated, or it may be saved as a

Waypoint to serve as a stationary point.

2. Display the page Options Menu and select the ‘Add

To Route’ option to display the Routes List.

3. Highlight and select the route desired and then

press IN on the CLICK STICK. A “Waypoint Added

Successfully” message displays.

A Route with list

of waypoints.

The Routes Page with a list

of Routes and the number

of Unused Routes.

Main Menu Page

Routes

190-00284-00_Prelim_FCC.indd 39 9/18/2003, 3:51:16 PM

Preliminary

Editing a Route

To remove all waypoints:

1. Select the on-screen page options button from

the Route Page and press the CLICK STICK IN to

access the Options Menu.

2. Highlight the ‘Remove All’ option and then press IN

on the CLICK STICK to remove all waypoints from

the list. When you see the prompt “Do you really

want to remove all waypoints from the route?”,

select “Yes”.

To reverse the route:

1. Select the on-screen page options button from

the Route Page and press the CLICK STICK IN to

access the Options Menu.

2. Highlight the ‘Reverse Route’ option and then press

IN on the CLICK STICK to reverse the order of

waypoints in the list. To change the route back to

the original order, repeat this process.

To copy the route:

1. Select the on-screen page options button from

the Route Page and press the CLICK STICK IN to

access the Options Menu.

2. Highlight the ‘Copy Route’ option and then press

IN on the CLICK STICK to copy. The copied route

displays on the Routes Page and is named the same

but followed by a numeral 1. You may then rename

and/or modify the copied route.

To delete the route:

1. Select the on-screen page options button from

the Route Page and press the CLICK STICK IN to

access the Options Menu.

2. Select ’Delete’ and then press IN on the

CLICK STICK. When you see the prompt “Do you

really want to delete route?”, select “Yes”.

To restore default settings for the route:

1. Select the on-screen page options button from

the Route Page and press the CLICK STICK IN to

access the Options Menu.

2. Select ’Restore Defaults’ and then press IN on the

CLICK STICK to restore factory settings.

A Route Options Menu

Delete Route Prompt

Main Menu Page

Routes

190-00284-00_Prelim_FCC.indd 40 9/18/2003, 3:51:17 PM

Preliminary

To review a route point:

1. Select the point from the Route Points List and press

the CLICK STICK IN to access the Options Menu

for the waypoint.

2. Highlight ‘Review’ and then press IN on the

CLICK STICK to display the Information Page.

3. Highlight the on-screen ‘OK’ button and then press

IN on the CLICK STICK to return to the Route List.

To insert a new point on the route list:

1. Select the row where you want the new point

inserted before. Press the CLICK STICK IN to

access the Options Menu.

2. Highlight ‘Insert’ and press IN on the CLICK STICK

to display the Find ‘N Go Menu and select a new

waypoint, city, exit, point of interest, etc.

3. With the new point highlighted, press IN on the

CLICK STICK to display the Information Page for

the new point and then select the on-screen ‘OK’

button to add it the route.

To remove a point from the route list:

1. Select the point that you want to remove from

the Route Waypoints List and press IN on the

CLICK STICK to display the Options Menu.

2. Highlight ‘Remove’ and press IN on the

CLICK STICK to remove the waypoint from the list.

To change a route point:

1. Select the waypoint that you want to change from

the Route Waypoints List and press IN on the

CLICK STICK to display the Options Menu.

2. Highlight ‘Change’ and press IN on the

CLICK STICK to display the Find ‘N Go Menu or

create a new waypoint and add it to the points list.

3. Select a new waypoint, access its Information Page

and press the on-screen ‘Use’ button to replace the

old route waypoint.

Route Waypoint

Options Menu

Removing a Route Point

Main Menu Page

Routes

190-00284-00_Prelim_FCC.indd 41 9/18/2003, 3:51:17 PM

Preliminary

Adding a Route Waypoint

to an end point on the

Route Map Page

Moving a Route Waypoint

by clicking and dragging.

To move a route point:

1. Select the point from the Route Points List and

press the CLICK STICK IN to access the Options

Menu for the waypoint.

2. Highlight the ‘Move’ option and press IN on the

CLICK STICK to select the waypoint.

3. Use the CLICK STICK to move the point up or

down in the list. Press IN on the CLICK STICK to

leave the waypoint in the new list order.

Adding or Editing from the Route Map Page

You can use the panning arrow with the Route Map

Page displayed to add or edit route waypoints.

To add a point at either end of a route:

1. Select the Route from the Routes List and press the

CLICK STICK IN to display the Route Page.

2. Highlight the on-screen ‘Map’ button at the bottom

of the page and press IN on the CLICK STICK to

display the Route Map Page.

3. Use the CLICK STICK to move the panning arrow

to either end of the displayed route until the end

point is highlighted. Then press it IN to display the

map Options Menu and select ‘Add Turns’. This

option appears only when highlighting the end

point of a route.

4. Move the panning arrow to a map item or location

where you would like to extend the route and press

IN on the CLICK STICK to display the Information

Page for the new point. Press the on-screen ‘Use’

button to return to the map page and then press it

again to place the new waypoint.

To add a route point within a route:

1. Follow steps 1 and 2 in the previous instruction.

2. Use the CLICK STICK to move the panning arrow

to a route line. When the arrow touches the line, the

line becomes thin. Press IN on the CLICK STICK to

display the word ‘ADD’ next to the line.

Main Menu Page

Routes

190-00284-00_Prelim_FCC.indd 42 9/18/2003, 3:51:18 PM

Preliminary

Navigation Page with

Bearing Pointer

3. Drag the line to a map item or other location where

you want to establish a new waypoint and then

press IN on the CLICK STICK to place the new

waypoint. A waypoint information page displays.

Press the on-screen ‘OK’ button to save the new

waypoint, then press it again after returning to the

Route Map.

To review or remove a route point:

1. Select the Route from the Routes List and press the

CLICK STICK IN to display the Route Page.

2. Use the CLICK STICK to highlight the desired route

and press IN to display the Route Page for that route.

3. Use the CLICK STICK to move the map panning

arrow to the point you want to review and press

IN to pop-up the Options Menu. Select ‘Review’ or

‘Remove’ and press IN again to either display the

Information Page or remove it from the route.

To view the next point in the route:

1. Follow Steps 1 and 2 above.

2. Place the map panning arrow on the point you are

currently viewing and press IN to display the Options

Menu. Select ‘Next’ and press IN again to view the

next waypoint.

Navigating a Route

A Route can be navigated using the Map Page or the

Navigation Page. The Map Page displays your movement,

the route line, and waypoints on the route. The Navigation

Page shows compass direction and a bearing pointer.

To navigate a route:

1. Select a route from the Routes List and then press IN

on the CLICK STICK to display the Route Page.

2. Highlight the on-screen ‘Navigate’ button at

the bottom of the page and then press IN

on the CLICK STICK to begin navigating the route.

The screen changes to the Navigation Page.

3. Move to the Map Page to view the route and the

position icon indicating your current location.

4. Begin moving, watching directional information on

the Navigation Page or progress on the Map Page.

Adding a new waypoint

within a Route

Main Menu Page

Routes

190-00284-00_Prelim_FCC.indd 43 9/18/2003, 3:51:19 PM

Preliminary

To stop navigation:

1. Highlight the ‘Stop Navigation’ option on either the

Navigation or Map page’s Options Menu or select

the ‘Stop’ button on the Route Page.

Data Fields for the Route Page

When navigating a Route, the data displayed in the

data ﬁ elds on the Route Page may be customized to

provide useful navigation information that is speciﬁ cally

related to route navigation.

Data options (for Route Page only) include:

Distance to Point - The distance from your current

location to a route waypoint.

ETA To Point - Estimated Time of Arrival at a route

waypoint (in sequence).

ETE To Point - Estimated Time Enroute to a route

waypoint.

Leg Course - The line of travel between two route

waypoints.

Leg Distance - The distance between two route

waypoints.

Leg Time - The time required to travel from a route

waypoint to the next.

Pointer - Direction pointer to a route waypoint.

Sunrise At Point - Time of sunrise at a route

waypoint.

Sunset At Point - Time of sunset at a route

waypoint.

To select data ﬁ eld options:

1. Use the CLICK STICK to highlight a data ﬁ eld on

the Route Page and then press IN to display the

Data Field Options Menu.

2. Use the CLICK STICK to highlight the desired

option and then press IN to enter the option in the

data ﬁ eld.

Data Field Options Menu

Distance to Point vs Leg

Distance. To view Leg

information, highlight the

end waypoint on a leg.

Main Menu Page

Routes

190-00284-00_Prelim_FCC.indd 44 9/18/2003, 3:51:20 PM

Preliminary

Using Track Logs

The Rino draws an electronic bread crumb trail on the

Map Page as you travel along. This bread crumb trail is

the ‘Track Log’. The Track Log contains information about

points along its path, including time, and position. The

Rino uses this information to allow you to navigate using

the saved track. You may also save tracks from other Rino

users as they communicate with you.

The ‘TracBack’ feature allows you to return along a

traveled path without marking any waypoints. When you

are ready to return to where you started, the Rino takes you

back by following the ‘Track Log’ that you left behind. You

can save a total of 20 tracks in the unit memory. The Track

Log starts recording as soon as the unit gets a satellite loca-

tion ﬁ x and the Track Log feature is turned on. When you

no longer need a Track Log you can press the on-screen

‘Clear’ button to remove it.

If you want to keep a record of a certain track log or

use the ‘TracBack’ feature, it is recommended that you clear

the Track Log before you start traveling. The percentage of

memory used by the current track log is displayed in a win-

dow at the top of the page. After the Track Log is ‘Cleared’,

it displays zero percent. When the display reaches 100%,

the most recent track points start to overwrite the least

recent if the default setting ‘Wrap When Full’ remains

selected on the track log setup. To avoid losing track points

you want, save the Track Log when it approaches the 99%

mark. The active track log will store up to 3000 points.

The Saved Track Page displays the track and it can also

be displayed on the Main Map Page as you navigate. You

may save up to 20 tracks with 250 points per track in the

unit. Saved Contact tracks count towards this total.

The ‘TracBack’ feature allows you to retrace your track

(or another Rino user’s track) in both directions. Tracks are

marked BEGIN and END.

You can set the track recording interval to Distance,

Time, or Automatic. You can set the Track display resolu-

tion to High, Medium, Low, and Lowest. You can also use

the Options Menu to delete all saved tracks.

Tracks Page

Track on Main Map Page

For effective use of the

“TracBack” feature, clear

the Track Log before

starting a new trip or after

saving the Track Log.

Rename saved Track Logs

to help identify them later.

Main Menu Page

Tracks Page

190-00284-00_Prelim_FCC.indd 45 9/18/2003, 3:51:20 PM

Preliminary

To save and use a Track Log:

1. Access the ‘Tracks’ page from the Main Menu. The

page has On/Off buttons, a list of tracks, and the

number of unused tracks.

2. You can press IN on the on-screen ‘Off’ button to

pause track logging. When track logging is active

the ‘On’ button appears to be recessed.

3. Highlight the ‘Save’ on-screen button and then

press the CLICK STICK to display the track log

‘Save Back Through’ list.

4. Use the CLICK STICK to select the time and date

that you would like to save the track through.

5. Press IN on the CLICK STICK to save the track log

and display the Track Page.

The Track Page shows the track name (which can

be renamed using the keyboard for data entry), the

total distance of the track, track area (if available),

a ‘Show on Map’ option, and on-screen buttons for

‘Map’, ‘OK’, and ‘Tracback’.

6. To enable the Tracback feature, highlight the

‘Tracback’ button and then press IN on the

CLICK STICK. This displays the Tracback Menu

with two options, ‘To Beginning’ and ‘To End’.

Highlight the desired option and then press IN on

the CLICK STICK to enable. Access the Map Page

or the Navigation Page to navigate the Track.

To use Track Log Setup options:

1. Highlight the Tracks Page Options Menu button

at the top of the page and press IN on the

CLICK STICK to display the menu.

2. Highlight the ‘Tracks Log Setup’ option and then

press IN on the CLICK STICK.

You can check the ‘Wrap When Full’ option

by highlighting it and then pressing IN on the

CLICK STICK. You can highlight the ‘Record

Method’ and ‘Interval’ ﬁ elds and press IN on the

CLICK STICK to display their options. ‘Interval’

options change to accommodate the ‘Record

Method’ choices.

Track Log Setup Menu

Save Track Options

Saved Track Page

If you choose Auto-record, you

can set the recording interval

from More to Least Often. You

can set recording intervals for

Time or Distance as desired.

Main Menu Page

Tracks Page

190-00284-00_Prelim_FCC.indd 46 9/18/2003, 3:51:21 PM

Preliminary

Main Menu Page

Proximity Points

The Proximity list lets you deﬁ ne an alarm circle

around a stored waypoint/contact position, and can

be used to help you avoid dangerous areas or to alert

you when you have strayed away too far from other

Rino users. Up to ten waypoints may be listed, with

a maximum alarm radius of 99.99 nautical or statute

miles or kilometers. If entering a proximity alarm circle,

a ‘Near Proximity Point <name>’ message will appear.

If leaving a proximity alarm circle, a ‘Leaving Proximity

Point <name>’ message will appear. This option is handy

in case you wish to remain a certain radio distance from

another user.

To add a proximity waypoint:

1. Use the CLICK STICK to highlight an empty space

on the Proximity list and press IN on the CLICK

STICK. The ‘Find ‘N Go’ screen appears. Highlight

‘Waypoints’ or ‘Contacts’ and press IN on the

CLICK STICK. (You may also select from other

items listed on the ‘Find ‘N Go’ screen.)

2. From the Review Page, highlight ‘Use’ and press the

CLICK STICK IN to conﬁ rm. The distance ﬁ eld will

now be highlighted. Press IN again to begin entry of

the proximity radius.

3. Use the CLICK STICK keys to enter a distance

value (to 99.99 units) and press IN.

To turn proximity alarms on or off:

1. Use the CLICK STICK to highlight the ﬁ eld left of

“Proximity Alarm” and press IN to place a check.

To clear one or all proximity point(s) from

the list:

1. Use the CLICK STICK to highlight the proximity

point to clear.

2. To clear a single alarm, press IN and choose

‘Remove’ and press IN.

3. To clear all proximity waypoints, highlight the

Options Menu and press IN. Choose ‘Remove All’

and press IN on the CLICK STICK.

4. Use the CLICK STICK to highlight the ‘OK’ prompt

and press IN to conﬁ rm.

Proximity Page

Proximity Circles on

Map Page

190-00284-00_Prelim_FCC.indd 47 9/18/2003, 3:51:22 PM

Preliminary

Main Menu Page

Satellite Page

Satellite Page using WAAS.

Satellite Page

The Satellite Page provides a picture of satellite signal

tracking, tells you when the unit is ready for navigation,

and shows your location coordinates.

The Skyview graphic represents a view looking up

at the sky from your current location showing satellites

and their assigned numbers. The outer ring represents

the horizon around you, the inner ring represents a view

above you at a 45° angle from vertical, and the center

represents directly overhead. Signal Strength Bars for each

satellite are shown to the left of the Skyview. Satellites

and their signals appear as hollow shapes until a signal is

received and then they appear darkened in. The stronger

the signal, the taller the signal bar.

The Wide Area Augmentation System (WAAS)

capability produces a more accurate position ﬁ x. When

enabled (the GPS mode set to ‘Normal’ and the interface

set to other than RTCM mode), this feature searches for

a WAAS satellite near your location and then receives

data for correcting differentials in the GPS satellite signals

and the WAAS satellite numbers (beginning at No. 33 or

above) display on the Satellite Page. When differential

correction data has been received for GPS satellites (num-

bers 32 or below), a ‘D’ displays in the signal bar beneath

the skyview. It is helpful to orient the unit antenna toward

the WAAS satellite shown in the skyview. To learn more

about the WAAS System, access the Federal Aviation

Administration web site (http://gps.faa.gov/). Because the

Rino relies on satellite signals to provide you with naviga-

tional guidance, the unit’s view of the sky determines how

fast you achieve navigational status. GPS signals do not

45°

90°

Outer ring -

the horizon

Inner ring- 45°

above the horizon

Center dot - 90°

above the horizon

190-00284-00_Prelim_FCC.indd 48 9/18/2003, 3:51:23 PM

Preliminary

Main Menu Page

Satellite Page

Satellite Page Options Menu

Highlight the on-screen button

at the top of the page & press

in on the CLICK STICK.

travel through rocks, buildings, people, metal, or heavy

tree cover so for best results, keep the unit in clear view

of the sky.

At least three satellite signals are needed to determine

your location, otherwise the unit displays a “Poor Satellite

Reception” message with four options and a brief expla-

nation to guide your decision:

Use with GPS Off - Select this option if you want

GPS off.

New Location - Select this option if you have moved

more than 600 hundred miles (from where you last

used the unit).

Restart Search - Select this option if today is not

(date provided).

Continue Acquiring - Select this option if no other

option applies. (The unit will attempt to gather GPS

signals.)

The Satellite Page options include:

Use With GPS Off - Use this option when you are

indoors, a clear view of the sky is obstructed, or you

want to save battery power. You can enter data, create

routes, etc., but cannot navigate in this mode.

Track Up/North Up - You can orient the satellite

skyview by selecting ‘Track Up’ (your direction of

travel) or ‘North Up’ (the satellite skyview oriented to

the north).

New Location - If you are more than 600 miles (from

where you last used the unit), select the ‘New Loca-

tion’ and then the ‘Use Map’ options to approximate

your location. This gives the unit reference informa-

tion and speeds satellite acquisition.

190-00284-00_Prelim_FCC.indd 49 9/18/2003, 3:51:24 PM

Preliminary

Main Menu Page

Satellite Page

To select the ‘Use With GPS Off’ option:

1. Use the CLICK STICK to highlight the Option Menu

button at the top of the page and then press it IN to

display the Options Menu.

2. Use the CLICK STICK to highlight the ‘Use With

GPS Off’ option and then press it IN to activate.

The Rino stops tracking satellites and should not

be used for navigation. However, the next time you

turn the unit on, it returns to Normal GPS operation.

To select ‘Track Up’ or ‘North Up’:

1. Use the CLICK STICK to highlight the Option Menu

button at the top of the page and then press it IN to

display the Options Menu.

2. Highlight either the ‘Track Up’ or ‘North Up’ option

(depending on which is currently in use), and press

in on the CLICK STICK to activate.

To enter a new location:

1. Use the CLICK STICK to highlight the Option Menu

button at the top of the page and then press it IN to

display the Options Menu.

2. Highlight ‘New Location’ and press in on the

CLICK STICK to display choices of ‘Auto’ or ‘Use

Map’.

If you choose ‘Auto’ the Rino determines your new

location automatically.

If you choose ‘Use Map’ a map page displays with

instructions stating, “Point to your approximate

location and press ENTER”. Use the CLICK STICK

to move the map pointer to your location on the

map and press it IN.

190-00284-00_Prelim_FCC.indd 50 9/18/2003, 3:51:24 PM

Preliminary

Main Menu Page

Setup Page

The Setup Menu

The Setup Pages allow you to customize your Rino to

your personal preferences. You can choose time settings,

units of measure, display backlighting and contrast set-

tings, heading measurement, interface options and system

operating mode.

By highlighting the icons on the Setup Menu and then

pressing in on the CLICK STICK, you can display the

Setup Page for each of the menu items.

Time Page

You can set the time to match your location or for a

projected location anywhere in the world.

Time Format - Allows you to choose from 12 or 24

hour time format so the clock displays like a standard

clock with 12-hour AM and PM cycles or display a 24-

hour cycle (Military Time).

Time Zone - Can be set to one of the eight US Time

Zones, or 24 International Time Zones (nearest city or

geographical region). Select ‘Other’ so you can enter the

UTC Time Offset.

Daylight Savings Time - Can be turned On or Off or

set to Automatic.

To set the time:

1. Use the PAGE button to access the Main Menu.

2. Use the CLICK STICK to highlight the Setup Icon

and then press it IN to display the Setup Menu.

3. Use the CLICK STICK to highlight the Time Icon

and then press it IN to display the Time Page.

4. Use the CLICK STICK to highlight the ‘Time Zone’

ﬁ eld then press it IN to display the time zone list.

5. Highlight a time zone from the list and then press

IN on the CLICK STICK.

6. If you choose ‘Other’, you must enter a UTC offset

value.

7. The correct time displays at the bottom of the page.

Setup Menu

Time Setup Page

190-00284-00_Prelim_FCC.indd 51 9/18/2003, 3:51:25 PM

Preliminary

Units Page

The Units features are best used by individuals with

a working knowledge of map grids and datums. To learn

more about these subjects, visit the National Imagery and

Mapping Agency at http://www.nima.mil or inquire at

your local library.

To select Units Page options:

1. For all ﬁ elds on this page, highlight the ﬁ eld and

then press the CLICK STICK to display the Options

Menu for the ﬁ eld.

2. Highlight the desired option on the menu and then

press the CLICK STICK to place it in the ﬁ eld.

Position Format - Allows you to choose from

different grid formats. The default position format,

‘hddd°mm.mmm’ displays the latitude and longitude in

degrees and minutes and is most commonly used.The

following additional formats are available:

hddd.ddddd°— latitude/longitude in decimal degrees

only, hddd°mm’ss.s”— latitude/longitude in degrees,

minutes, seconds, UTM/UPS— Universal Transverse

Mercator / Universal Polar Stereographic grids, British

Grid, Dutch Grid, Finnish KKJ27, German Grid, India

Zones, Irish Grid, Loran TD, Maidenhead, MGRS, New

Zealand, Qatar Grid, RT90, Swedish Grid, Swiss Grid,

Taiwan Grid, User Grid, W Malayan RSO

Using the LORAN TD Format

When creating new waypoints using LORAN TD

coordinates, you must set the correct LORAN chain num-

ber and secondary stations in the Setup TD ﬁ eld before

storing the waypoint. After the waypoint is stored in unit

memory, it will always reference the LORAN chain num-

ber and secondary stations currently selected in the Setup

TD ﬁ eld. If you enter a different LORAN chain number,

change the secondary stations or offsets in the Setup TD

ﬁ eld, the active waypoint information will reﬂ ect those

changes. Since the GPSMAP unit does not rely on the

LORAN signal for navigation, it can reference a different

GRI chain and/or secondary stations and still navigate to

the location stored in memory.

Units Page

Position Format

Options Menu

Main Menu Page

Setup Page

The ‘User’ datum is based on

a WGS-84-Local datum and

is an advanced feature for

unlisted or custom datums. To

learn more, check your local

library or on the world wide

web for educational materials

on datums and coordinate

systems.

190-00284-00_Prelim_FCC.indd 52 9/18/2003, 3:51:26 PM

Preliminary

Main Menu Page

Setup Page

To setup Loran TD from the Main Menu:

1. When ‘Loran TD’ is chosen, the Loran TD setup

window will automatically appear.

2. To change the settings of any of the ﬁ ve ﬁ elds,

highlight the ﬁ eld, press the CLICK STICK IN.

3. When done, highlight ‘Save’ and press IN.

4. To return to the setup page, simply select Loran TD

from the Position Format ﬁ eld again..

If the active GRI Chain, secondary stations or offsets

have been changed since the waypoint was created, the

waypoint will now reference the active GRI chain and

secondary stations and adjust the TD coordinates ac-

cordingly. Remember that the GPS is not relying on the

LORAN signal for navigation and actually converts the TD

coordinate to a useful LAT/LON coordinate (in the back-

ground) before storing the waypoint to memory or using

it for navigation. Because of this the unit can navigate to a

TD coordinate anywhere in the world.

For more information on Loran TDs, you may down-

load Garmin’s “Loran TD Position Format Handbook”

from the Garmin web site at http://www.Garmin.com/

support/userManual.html.

Map Datum - Offers a selection of nearly all map

datums in common use. Every map is based on a map da-

tum (a reference model of the earth’s shape) and is usually

listed in the title block of the map. If you are comparing

GPS coordinates to a paper map, chart, or other reference,

the map datum in this ﬁ eld must match the horizontal

map datum used to generate the map or other reference.

The default datum is WGS 84 (World Geodetic Survey

1984) and should only be changed when using maps or

charts specifying a different datum. If a map does specify

a datum, use the options list to ﬁ nd datums applicable to

the region of the map, selecting the one that provides the

best positioning at a known point. If necessary, you also

may choose the ‘User’ datum for custom designed grids.

Distance/Speed - You can choose from three units of

measure to display your rate of travel.

Elevation/Vertical Speed - You can choose from two

units of measure to record your elevation and vertical

speed.

Setting Loran TD Info

Map Datum

Options Menu

190-00284-00_Prelim_FCC.indd 53 9/18/2003, 3:51:26 PM

Preliminary

Main Menu Page

Display Page

You can adjust the amount of time that the backlight-

ing feature stays on and adjust the screen contrast.

Backlighting Timeout - Choose from Stays On, to

delays of 15 seconds, 30 seconds, one, or two minutes

before timing out.

Contrast Adjustment - Can be adjusted from light to

dark using the slider adjacent to the contrast bar.

To set the backlighting timeout:

1. Highlight the Backlight Timeout ﬁ eld and then press

IN on the CLICK STICK to display options.

2. Highlight the desired option and then press IN on

the CLICK STICK to activate it.

To adjust the contrast:

1. Highlight the contrast slider and then press IN on

the CLICK STICK to activate.

2. Move the CLICK STICK up or down to move the

slider until the desired contrast has been set.

Heading Page

You can select the type of heading displays, the types

of North References, or enter the magnetic variation.

Display - Allows you to choose from Cardinal Letters,

Degrees or Mils.

North Reference - You can choose from True,

Magnetic, Grid or User options. If ‘User’ is chosen, you

must correct for the Magnetic Variation. The Electronic or

GPS compass uses the North Reference setting to create a

bearing.

To select either option:

1. Highlight the ﬁ eld and then press IN on the

CLICK STICK to display the options.

2. Highlight the option and press IN on the

CLICK STICK to activate.

Display Page

Heading Page

Setup Page

190-00284-00_Prelim_FCC.indd 54 9/18/2003, 3:51:27 PM

Preliminary

Interface Page

The Interface Settings Page allows you to choose from

different input/output serial data formats. This feature is

used when connecting to external NMEA devices, a DGPS

beacon receiver, a personal computer, etc. See page 68 for

using the Rino with MapSource. The formats are: formats:

Garmin - The proprietary format used to exchange

waypoint, track, and map data with a PC. Use this setting

for transferring data when using a MapSource product.

Garmin DGPS - Allows DGPS input using a Garmin

beacon receiver and a standard RTCM SC-104 and DGPS

tuning.

NMEA In/NMEA Out - Supports the output of standard

NMEA 0183 version 3.0 data. Use this for real-time plot-

ting with MapSource or 3rd party programs.

Text Out - Allows ASCII text output of location and veloc-

ity information without input capabilities.

RTCM In - Allows DGPS input using a standard RT-

CM SC-104 format without output capabilities.

RTCM In/NMEA Out- Allows DGPS input using a

standard RTCM SC-104 format and supports the output of

standard NMEA 0183 version 3.0 data.

RTCM In/Text Out- Allows DGPS input using a standard

RTCM SC-104 format and simple ASCII text output of

location and velocity information.

None - Provides no interfacing capabilities.

If ‘Garmin DGPS’ or ‘RTCM in/NMEA Out’ format is

selected, additional ﬁ elds are provided to control a Garmin

differential beacon receiver (e.g. GBR 21 & GBR 23)

directly from your unit. Tuning is automatic with ‘Scan’

or you can enter the beacon frequency and bit rate when

you select ‘User’ from the Beacon list to manually tune the

receiver. Refer to the beacon receiver instructions.

To select a serial data format:

1. Highlight the Serial Data Format ﬁ eld and then press

IN on the CLICK STICK to display options.

2. Highlight an option and then press IN on the

CLICK STICK to activate it.

Serial Data Options

Main Menu Page

Setup Page

190-00284-00_Prelim_FCC.indd 55 9/18/2003, 3:51:28 PM

Preliminary

Main Menu Page

System Page

The System Setup Page allows you to change GPS

operation modes, use the WAAS capabilities, and turn the

Message Beep on or off and choose the battery type.

The Option Menu allows you restore defaults or

display the current version of unit operating software and

the Unit I.D. Number. Software updates and instructions

for downloading are available from the Garmin web site

(www.Garmin.com).

Choose one of the four GPS options other than

‘Normal’ to signiﬁ cantly save battery power. The ‘Battery

Saver’ mode reduces the rate of satellite signal posi-

tion updating and the ‘GPS Off’ option stops satellite

signal reception altogether. The ‘Demo Mode’ simulates

navigation.

See page 48 for an explanation of WAAS capabilities.

To adjust System Page options:

1. Use the CLICK STICK to highlight the ﬁ eld and

then press IN to display options. Then use the

CLICK STICK to select the desired option and press

IN.

To display Software Version and Unit ID:

1. Use the CLICK STICK to highlight the Options

Menu and then press IN. Then use the CLICK STICK

to highlight ‘Software Version’ and press IN. Press IN

again to close that Software Version window.

To change Battery Type:

1. Use the CLICK STICK to highlight the ‘Battery Type’

ﬁ eld and then press IN. Then use the CLICK STICK

to select the desired option and press IN.

Use the following settings for different battery types:

Battery Type Set Unit To

Alkaline Alkaline

NiMH NiMH

NiCad NiMH

Lithium (1.2V) NiMH

Lithium (1.5V) Alkaline

System Setup Page in

Normal Mode,

WAAS Enabled.

Advertised battery life

is rated using Alkaline

batteries. You may not get

the listed battery life using

other types of batteries.

Setup Page

190-00284-00_Prelim_FCC.indd 56 9/18/2003, 3:51:28 PM

Preliminary

Calendar

This feature provides you with a monthly calendar

with programmable reference notes dates. You can display

one monthly calendar of days at a time and mark days on

each with reference notes using the data entry keypad.

Days that are shaded have notes added. You can create

reference notes for multiple months and for months in

years yet to come. You can record 100 notes with up to

18 characters each.

To change the month and year:

1. Highlight the left or right arrows on either side

of the date and press IN on the CLICK STICK to

change the month/year. The left arrow will show

past months/years and the right arrow will show

future months/years.

To use the current month and year:

1. Choose ‘Set To Current Date’ from the Options

Menu.

To create a reference note for a selected

date:

1. Use the CLICK STICK to highlight the day of the

month and then press IN to display the Options

Menu for the date.

2. Highlight and select ‘New Note’ to begin entering

text from the keyboard.

Observe the message as it is created in the message

block below the keyboard.

3. To edit or delete a note previously created, highlight

the date and press IN on the CLICK STICK. Options

shown include ‘Edit Note’, ‘Delete Note’, ‘View Sun

and Moon’, or ‘View Hunt and Fish’.

To delete notes by week:

1. Choose ‘Delete Notes...’ from the Options Menu.

2. From the ‘Oler Than..’ window, choose the desired

option and press IN on the CLICK STICK.

Calendar Page

Calendar Page Options

Calendar Page Keyboard

and Message Block

Main Menu Page

Calendar

190-00284-00_Prelim_FCC.indd 57 9/18/2003, 3:51:29 PM

Preliminary

Main Menu Page

Alarm Clock

This feature provides an alarm for the system clock.

Enter a time in the time ﬁ eld and turn the alarm on and

off from the control ﬁ eld menu. Remember to enter alarm

times in the same time format (UTC or local) you’re using

for your system. The unit must be on for the clock alarm

to work.

To set an alarm clock time:

1. Use the CLICK STICK to highlight the time ﬁ eld

and then press IN to display the keyboard. Then use

the CLICK STICK to enter the desired time, choose

‘OK’ and press IN.

To turn the alarm clock On/Off:

1. Use the CLICK STICK to highlight the Alarm Mode

ﬁ eld and then press IN to display the options.

2. Choose ‘On’ or ‘Off’ and press IN on the CLICK

STICK.

When the alarm sounds, a brief tone will be heard

(unless Message Beep is ‘Off’ under System Setup) and

“Alarm Clock” will appear on the screen. Press IN on the

CLICK STICK to acknowledge the alarm.

Calculator

This feature provides you with all the basic functions

of both of standard or scientiﬁ c calculator. You can per-

form most calculations identiﬁ ed by the function symbols

along the sides of the keypad and can save the results

temporarily in the memory. The memory is cleared either

manually or when you turn off the Rino.

To change calculator options:

1. Highlight the page Options Menu and press IN

on the CLICK STICK to display the ‘Scientiﬁ c/

Standard’ and ‘Radian/Degrees’ options.

2. Highlight the option you want to change and then

press IN on the CLICK STICK for the change to

take effect.

3. Use the CLICK STICK to move about the keypad,

enter numbers, and perform calculations.

Alarm Clock /

Calculator

Alarm Clock Page

Calculator Page

190-00284-00_Prelim_FCC.indd 58 9/18/2003, 3:51:30 PM

Preliminary

Stopwatch

This feature allows you to use the unit as a stopwatch,

including a lap timer. You may also have the unit record

the lap time based on distance. For example, if you set the

lap distance to one mile, the unit will record the time it

takes you to travel one mile.

To start the stopwatch:

1. Use the CLICK STICK to highlight the ‘Start’

ﬁ eld and then press IN. You may also press the V

(Volume) key to Start the stopwatch.

To stop the stopwatch:

1. Use the CLICK STICK to highlight the ‘Stop’

ﬁ eld and then press IN. You may also press the V

(Volume) key to Stop the stopwatch.

To use the lap feature:

1. With the stopwatch running, use the CLICK STICK

to highlight the ‘Lap’ ﬁ eld and then press IN. You

may also press the Z (Zoom) key to capture the lap

time.

To reset the stopwatch:

1. With the stopwatch stopped, use the CLICK STICK

to highlight the ‘Reset’ ﬁ eld and then press IN. You

may also press the Z (Zoom) key to reset the times.

To time lap by distance:

1. Use the CLICK STICK to highlight the Options

Menu and then press IN. Choose ‘Lap by Distance’

and press IN. To return to ‘Lap by Button Press’,

repeat these same steps.

To set a lap distance value:

1. Use the CLICK STICK to highlight the Options

Menu and then press IN. Choose ‘Set Lap Distance’

and press IN. To return to ‘Lap by Button Press’,

repeat these same steps.

2. Use the CLICK STICK to highlight the ﬁ eld you

wish to change and then press IN. Enter the new

value and press IN. When done, highlight ‘OK’ and

press IN on the CLICK STICK.

Setting Lap By Distance

Main Menu Page

Stopwatch

Stopwatch Page

190-00284-00_Prelim_FCC.indd 59 9/18/2003, 3:51:31 PM

Preliminary

Sun and Moon

This feature provides you with a graphic display of

both sun and moon positioning for a certain date, time

and location with times for sunrise, sunset, moonrise, and

moonset.

To set the date and time:

1. For the Date and Current Time, highlight each ﬁ eld,

then press IN on the CLICK STICK to begin data

entry of individual characters.

2. To display the current date and time, highlight

the page Options Menu and press IN on the

CLICK STICK to display the ‘Use Current Time’

option and then press IN on the CLICK STICK to

activate.

To set the location:

1. Highlight the Location ﬁ eld and then press the

CLICK STICK to display the ‘New Location’ options

list.

2. Highlight the option desired and then press IN on

the CLICK STICK to activate. If you choose ‘Current

Location’ the ﬁ eld values displayed on the page

displays your location. If you choose ‘Use Map’, a

map page displays. Use the map pointer to identify

the desired location and then press IN on the

CLICK STICK. If you choose ‘Use Find ‘N Go Menu’

follow instructions for using the Find ‘N Go Menu on

page 31.

Hunt and Fish

This feature provides you with a listing of best times

for hunting and ﬁ shing for a chosen location and date.

To set the date:

1. Highlight the date ﬁ eld and then press IN on the

CLICK STICK to begin data entry of individual

characters. To display the current date, highlight

the page Options Menu and press IN on the

CLICK STICK to display the ‘Use Current Date’

option and then press IN on the CLICK STICK to

activate.

Hunt and Fish Page

Sun and Moon Page

Sun and Moon /

Hunt and Fish

Main Menu Page

190-00284-00_Prelim_FCC.indd 60 9/18/2003, 3:51:31 PM

Preliminary

‘New Location’ Options

To set the location:

1. Highlight the Location ﬁ eld and then press IN on

the CLICK STICK to display the ‘New Location’

options list.

2. Highlight the option desired and then press IN

on the CLICK STICK to activate. If you choose

‘Current Location’ the ﬁ eld values displayed on the

page reﬂ ect the times at your current location.

3. If you choose ‘Use Map’, a map page displays. Use

the map pointer to identify the desired location and

then press IN on the CLICK STICK.

If you choose ‘Use Find ‘N Go Menu’ follow

instructions for using the Find ‘N Go Menu on page

31.

Area Calculator

This feature provides you an area calculation as you

move about a location or view a saved track. The area

calculation displays in acres, hectares, and square feet,

square yards, square meters, square kilometers, and

square miles.

To calculate the area:

1. With the Rino having a GPS ﬁ x, press ‘Start’ when

you are ready to begin.

2. Begin walking or traveling the outskirts of the area

you want to measure.

3. Continue to the end point, then use the

CLICK STICK to stop the calculation.

4. Use the CLICK STICK to store the area as a saved

track.

To review the area of a saved track:

1. On the Tracks page, highlight a Saved Track and

press IN on the CLICK STICK to see a map with

the area shown in a data ﬁ eld at the bottom.

Hunt and Fish /

Area Calculator

Main Menu Page

NOTE: The times displayed

are the recognized best and

good times for hunting and

ﬁ shing. But, be certain that

they are not in conﬂ ict with

state and local game laws

which may vary from location

to location. It is your respon-

sibility to know and abide by

these laws.

190-00284-00_Prelim_FCC.indd 61 9/18/2003, 3:51:32 PM

Preliminary

Games Menu

The Games Page includes: Memory Race, Waypoint

Bomber, Clothesline, Assimilation and Beast Hunt.

Highlight the appropriate icon and then press IN on the

CLICK STICK to play the desired game. Brief instructions

will be displayed when you start each game.

Memory Race

Be the ﬁ rst to clear the board by matching all of the two

symbols sets together. Each symbol is in a square (you can

adjust the size) which you will need to walk or travel to.

Once your position appears in a square, highlight ‘Open’

at the bottom of the screen and press IN on the CLICK

STICK. Play by yourself or race against others! Press PAGE

to quit at any time.

To adjust the Grid Size or Square Size:

1. Highlight the ‘Grid Size’ or Square Size’ ﬁ eld and press

IN on the CLICK STICK.

2. Choose the desired size and press IN. Highlight ‘Start’

and press IN to begin the game!

Waypoint Bomber

In this game, it’s good to stay on the move! Two or more

players attempt to “bomb” each other using their Rino

radios. All players must be on the same channel/code to

play. Move your cursor around on the map page using your

CLICK STICK. When you think an opponent is close to

the cursor, drop a bomb by press IN on the CLICK STICK.

The receiving radio will show an ‘Incoming” message. If

the receiving radio is within the blast circle (about 45 feet),

it will display a message that you have been hit. You must

wait 10 seconds during shots to reload. You could play

to the ﬁ rst player with so many hits loses or have a timed

game with the winner being the one with the least amount

of hits on their radio! Hint: Mark stationary objects such as

trees, poles etc and drop a bomb when an opposing player

is near that object! Adjust the rules to your liking!

1. To ﬁ re at the cursor location, press Enter (IN on the

CLICK STICK

2. To ﬁ re at your current location, press the TALK key.

3. Press CALL to view the scoreboard at any time.

4. Press PAGE to quit the game at any time.

Main Menu Page

Games

190-00284-00_Prelim_FCC.indd 62 9/18/2003, 3:51:33 PM

Preliminary

Main Menu Page

Games

Clothesline

Team members select the same user symbol and then

attempt to “hit” or ‘clothesline” other players by press-

ing the TALK key when an opposing team member is

between them. You may also mark a point and assign it a

symbol to be used as a stationary team member. You must

wait 10 seconds between attempts. Press CALL to show

the score and PAGE to quit the game.

Assimilation

Think of this as a high-tech game of tag. Team

members select the same user symbol and then attempt

to assimilate others into their team by getting within 30

feet of them and pressing the TALK key. You can set a

time limit, with the largest team winning, or play until the

other team is completely assimilated! Set your own rules

and enjoy! Press CALL to show the score and PAGE to

quit the game.

Beast Hunt

The objective is to ﬁ nd and kill the beast with an ar-

row before it incinerates you or you fall into one of several

pits while navigating a maze of platforms! From time to

time you will be transported by slides that curve or move

diagonally. When you think you know where the beast

is, from an adjacent spot, press Enter (IN on the CLICK

STICK) to initiate aiming. With the CLICK STICK,

point the arrow in the direction where you think the beast

is and press IN on the CLICK STICK to ﬁ re. When you

lose a game, the screen will display the layout of hazards,

slides, warning platforms and the location of the beast.

A scoreboard keeps track of your wins and losses. Press

PAGE anytime during the game for further instructions, to

turn the sound On/Off or to quit.

Clothesline

Assimilation

Beast Hunt

190-00284-00_Prelim_FCC.indd 63 9/18/2003, 3:51:34 PM

Preliminary

What is FRS?

FRS, or Family Radio Service, is a UHF radio

frequency band licensed by the FCC for general public

use. The operating frequency ranges from 462.5625 to

467.7125 MHz, with a transmitting power of one half

watt. FRS radios are small and lightweight, making them

ideally suited for outdoor activities.

The use of FRS radios does not require a license. FRS

was intended for use by families and small groups as an

inexpensive means of two-way voice communication.

The use of GMRS (General Mobile Radio Service)

radios do require a FCC license. The operating frequency

fro GMRS ranges from 462.550 to 462.725 MHz

FRS radios broadcast on one of 14 channels, each with

a speciﬁ c frequency within the FRS band.

FRS is intended for use throughout the United States,

its territories and possessions. It may also be used in

Canada. FRS is not approved outside of these areas and

may interfere with local government communication

frequencies (ﬁ re, police, etc.). GMRS use is currently not

allowed in Canada.

More sophisticated FRS radios also include call func-

tions, squelch codes, channel scan, and voice scramble.

Call functions allow you to push a Call button on the

radio, and alert other radios set on the same channel.

This feature generates a call tone and is handy in a noisy

environment where the tone is easier to initially identify

than plain speech.

Squelch codes, are useful when a lot of radio trafﬁ c

occurs on FRS frequencies. This allows you to selectively

block out other FRS users that are not part of your group.

They will still be talking with others in their own group,

but you will not hear them on your radio. They may or

may not hear you and members of your group on their

own radios. Squelch codes act as a ﬁ lter, blocking your

FRS radio from hearing other unwanted FRS users.

Channel scan allows your FRS radio to scan all FRS

frequencies for signals. This is a great way to identify

an unused or less-used channel for your group. After

scanning brieﬂ y to see what channels other users are on,

FRS Explained

Appendix A

190-00284-00_Prelim_FCC.indd 64 9/18/2003, 3:51:34 PM

Preliminary

simply set your FRS radios to an unused channel and

enjoy less interference. You may also ﬁ nd this useful just

to listen in on others currently using FRS. After all, these

are public-use frequencies and everyone has a right to

talk or listen in.

For greater communication, some FRS radios have

a voice scramble feature. This features will cause your

message to sound garbled to other FRS users that are not

part of your group. However, it does not guarantee your

conversations will be 100 percent private and secure.

Other casual FRS users will not hear your messages, but

users with similar radios or more technically-oriented

users can still monitor your conversations.

FRS radios typically feature half watt transmit power.

You may encounter FRS radios with lower transmit power

speciﬁ cations than this, but all are at least 100mW (0.1

watt). You can expect your FRS radio to offer reliable

operation at one-mile range. If the area between you and

another FRS operator is free of obstructions, operation up

to a two-mile range can be achieved.

What are the limitations?

If you are operating in an urban environment or in

varying terrain (canyons or mountains), these man-made

or natural features will act as obstructions limiting the

maximum reception range of your FRS radio. The UHF

FRS frequency is “line of sight”, meaning that the signals

do not follow the surface of the earth, but instead radiate

in a straight line from the transmitting antenna. If there

is an obstruction between the transmitting FRS radio and

the receiving FRS radio, the signal will not be received.

Smaller obstructions, such as trees, cars and even crowds

of people will cause some loss of signal, resulting in

reduced maximum range. Other FRS users can crowd

FRS frequencies. You may ﬁ nd squelch codes and channel

scanning useful to minimize interference from other FRS

users.

FRS Explained

Appendix A

190-00284-00_Prelim_FCC.indd 65 9/18/2003, 3:51:35 PM

Preliminary

Physical

Case: Fully-gasketed, high-impact plastic alloy, waterproof to IPX7 standards

(waterproof to one meter for 30 minutes)

Size: 4.5”H x 2.3”W x 1.6”D; 7”H with antenna (11.4 x 5.8 x 4.1; 17.8 cm)

Weight: Approx. 7.6 ounces (236 g) w/batteries

Temperature Range: 5° to 158°F (-15° to 70°C) (operating)

Display: 1.4”H x 1.4”W (3.6 cm x 3.6 cm) 160 x 160 pixels, high-contrast LCD

Performance

Receiver: WAAS Enabled, Differential-ready, 12 parallel channel

Acquisition time: Approx. 15 seconds (warm start)

Approx. 45 seconds (EZinit/cold start)

Approx. 5 minutes (First Time/AutoLocate™)

Update Rate: 1/second, continuous

GPS Accuracy: <15 meters (49 ft) RMS, 95% typical1

DGPS (USGC) Accuracy: 3-5 meters (10-16 ft), 95% typical with DGPS corrections2

DGPS (WAAS) Accuracy:

<3 meters (10 ft), 95% typical with DGPS corrections2

Velocity Accuracy: 0.05 meter/sec steady state

Dynamics: Performs to speciﬁ cations to 6 g’s

Interfaces: NMEA 0183, RTCM 104 (for DGPS corrections) and

RS-232 for PC interface

Antenna: Quad-helix

Radio

Channels: 22 (1-14 FRS, 15-22 GMRS) GMRS requires FCC license

Squelch Codes: 38

Range: Up to 2 miles on FRS; up to 5 miles on GMRS

Radio Output Power: FRS 0.5 watt; GMRS 1.0 watt

Power

Input: Three 1.5-volt AA batteries3

Battery Life: GPS only - up to 28 hours; FRS only - up to 20 hours;

FRS and GPS - up to 15 hours5

Speciﬁ cations are subject to change without notice.

Subject to accuracy degradation to 100m 2DRMS under the U.S. DoD-imposed Selective Availability program.

With optional Garmin Differential Beacon Receiver Input (such as Garmin GBR 21 or 23).

The temperature rating for the Rino may exceed the usable range of some batteries. Alkaline batteries can rupture

at high temperatures. External power can only be applied using the Garmin Auto Power Adapter or PC Interface

Cable with Auto Power Adapter. These cables contain a 12 Vdc to 3 Vdc voltage regulator. Modiﬁ cations or other

applications voids the product warranty.

Alkaline batteries lose a signiﬁ cant amount of their capacity as temperature decreases. Use lithium batteries when

operating the Rino in below-freezing conditions. Extensive use of screen backlighting and the radio signiﬁ cantly

reduces battery life. Different brands of batteries vary in performance.

5, 5, 90 Duty Cycle - 5% receive with audio unmuted, 5% transmit and 90% standby (receive with audio muted)

Appendix B

Speciﬁ cations

190-00284-00_Prelim_FCC.indd 66 9/18/2003, 3:51:35 PM

Preliminary

To obtain accessories, see your local dealer or visit the

Garmin web site at www.Garmin.com and click on Shop

link.

12-volt Adapter Cable: Provides unit power from an

automobile cigarette lighter.

2.5 to 3.5 mm Jack Adapter: Allows you to use 3rd

party headsets with your Rino unit..

Bash Guard Kit: Helps protect the Rino’s edges against

hard shocks. Includes 2 bash guards, quick-release neck

lanyard and belt clip.

Carrying Case: Protects the Rino and permits use while

in the case.

Earbud with PTT (Push To Talk) Mic: Earbud ﬁ ts

snuggly inside of and has a clip-on mic with PTT button.

Flexible Ear Receiver: Comfortable earpiece for better

hearing ability of your Rino.

Headset with VOX Boom Mic: Hands-free at it’s best!

Utilize the Rino’s VOX (Voice Operated Transmission)

feature with this headset and voice activated boom mic.

Instructional Video: For getting accustomed to your

Rino basic operations quickly.

MapSource™ Map Data CD-ROMs: An excellent tool

for creating waypoints and routes on your PC using a

background map and downloading them to your Rino.

See your Garmin dealer for MapSource details.

NiMH Battery Charger: Why buy when you can

recharge? Includes NiMH battery charger and 4 AA NiMH

batteries.

PC Data Cable and 12-volt Adapter: Allows transfer of

waypoints and routes from a PC to the Rino and provides

unit power from an automobile cigarette lighter.

Rail/Handlebar Mount: Allows you to mount your Rino

on most rails or handlebars.

Suction Cup Mount: Allows you to mount your Rino on

most smooth surfaces or inside windscreens.

Appendix C

Accessories

190-00284-00_Prelim_FCC.indd 67 9/18/2003, 3:51:36 PM

Preliminary

Transferring MapSource Map Data

If you have purchased a Garmin MapSource CD-ROM

mapping program you may want to transfer detailed map

data before beginning use, to provide your unit with

maximum Find features and mapping capability. The Rino

accepts up to 8 MB of map data from most MapSource

products. It is not possible to transfer 3rd party maps into

Garmin products.

You cannot view multiple types of MapSource data in

the same location at the same time (one will draw over the

other). When you leave a MetroGuide area for example

and enter the area of a topographic map, the display will

change to contour lines. The same is true when moving

from a topo map to a MetroGuide map.

The BlueChart maps are at the top of the hierarchy and

will replace any other map information. Here is the list of

the hierarchy for your reference beginning with those titles

that take precedence:

1. BlueChart 2. MetroGuide 3. Fishing Hot Spots

4. Points of Interest 5. U. S. Waterways & Lights

6. U. S. Topo 7. Roads and Recreation 8. WorldMap

Map data transfer requires the use of a PC, a Garmin

MapSource CD-ROM, and the PC Interface Cable with RS-

232 serial port connector supplied with this unit. Follow

detailed instructions for data transfer in the MapSource

User’s Manual.

Garmin MapSource

CD-ROM’s offer a variety of

detailed mapping data and

navigation information.

MapSource is also an excellent

medium for storage and safety

backup of Personal Waypoints,

Routes and Saved Tracks.

See your Garmin Dealer or

visit the Garmin web site at:

www.Garmin.com

for

informa

tion.

Transferring Map Data:

You can transfer detailed map data to the Rino from a Garmin MapSource CD-ROM.

The Rino 130 can accept up to 8 MB of data from any MapSource program loaded on a

PC and connected to the Rino Data Port. For this function you need the PC Data Cable

provided with your unit.

To setup for data transfer:

1. Remove the Power/Data Port cover on the back of the unit by lifting up on the

protective cover on the back of the unit.

2. Connect the serial port connection on the cable to the PC serial port.

3. Connect the remaining cable connector to the back of the Rino by orienting the slot

on the connector with indexing bar on the back of the unit. Then, slide the connector

in place. Be sure that the cable is pushed all the way into the back of the unit!

4. Turn on the Rino and follow instructions for map data transfer provided in the

MapSource User’s Manual. See also page 55 for unit interface settings.

MapSource

Setup

Appendix D

190-00284-00_Prelim_FCC.indd 68 9/18/2003, 3:51:36 PM

Preliminary

Symptom Probable Cause Remedy

To resolve problems that cannot be remedied using

this guide, contact Garmin Customer Service at:

913-397-8200 or 800-800-1020

Unit does not turn on.

Unit does not turn ON,

even with new batteries.

The unit turns On, then turns

Off.

It takes more than ten minutes

to get a location ﬁ x.

Cannot access a WAAS system

satellite after 2 to 5 minutes.

Cannot obtain a differential

position from WAAS.

Cannot access Point of Interest,

Street, or Intersection Find

Lists.

Cannot view a track being laid

down on the map page when

traveling.

Cannot see the panning arrow

on the Map Page easily.

Cannot exit a menu or page

by moving the CLICK STICK to

the left.

Batteries are exhausted.

Batteries may be installed backwards.

You are pressing and releasing the

POWER button.

Batteries may be nearly exhausted.

The unit’s view of satellites is

obstructed.

Your view of the satellite is obstructed

or you are located too far from satellites

currently in service for the Americas.

System GPS operation is set to some-

thing other ‘Normal’ and/or interface

setting is for RTCM.

You have not collected enough infor-

mation from the WAAS satellite.

MetroGuide map data is not activated.

The Track Log feature is turned Off.

There is too much map clutter or the

scale is such that map features are too

densely displayed.

Some menus and pages have an ‘X’

(Exit) on-screen button in the upper

right corner.

Replace batteries.

Reinstall batteries.

You must press and hold the

POWER button for two seconds.

Replace batteries.

Move to a location with a clear view

of the sky.

Move to a location with a clear view

and point the unit antenna in the

direction of the satellite.

Set system GPS to ‘Normal’ and

interface to other than RTCM.

Wait 10-20 minutes for the initial col-

lection, then 1-2 minutes afterwards.

Access the Map Setup ‘Map’ option

and activate the check box.

Access the Tracks Page, highlight

the ‘ON’ button and press in on the

CLICK STICK.

Use the Map Page Setup Page to

reduce map clutter or change the

map scale.

Highlight the on-screen button and

then press in on the CLICK

STICK.

The Rino is programmed to provide “pop-up” messages concerning operational characteristics and conditions.

Press in on the

CLICK STICK

to acknowledge a message and return to the current feature.

GPS Troubleshooting

Guide

Appendix E

190-00284-00_Prelim_FCC.indd 69 9/18/2003, 3:51:37 PM

Preliminary

Appendix E

Symptom Probable Cause Remedy

To resolve problems that cannot be remedied using this

guide, contact Garmin Customer Service at:

913-397-8200 or 800-800-1020

Radio not transmitting.

Messages not being received

by others

Limited talk range

You can hear others, but they

can’t hear you or you see an

incoming transmission, but

nothing is heard.

Message garbled.

Too many unwanted conversa-

tions being heard.

Interference or static

Cannot transmit location.

None of the keys except TALK

will work.

TALK key may not be fully depressed.

Radio feature not set to On.

Incorrect channel/code setting. Out of

radio range or obstructions.

Natural or man-made obstructions can

decrease range.

You’re on the same channel, but

different code set.

Scramble option is enabled (130 Only)

Too many user on channel or code is

set to zero.

Radios too far apart or too close

Obstructions in radio line of sight..

Interference from other electronics.

Your view of the satellite is obstructed

and a GPS ﬁ x is not available, ‘Send

Location’ is off ; 10 seconds have not

elapsed since last location transmission,

or GPS is set to Off.

Keylock is enabled

Press and hold TALK key in until

done talking. Turn radio On.

Make sure other radios have

the same channel and code set.

Decrease distance between radios.

Decrease distance between radios or

obtain a better line of sight between

radios.

If you are using code zero, you will

hear all transmissions on that chan-

nel. Use the same code (1-38) as

the other party or use ‘Scan’ to ﬁ nd

what code they are on.

Both radios need to have this

feature set the same.

Switch to a different channel and/or

use code other than zero (1-38).

Keep radios at least 3 feet apart.

Obtain better line of sight between

radios. Shut off other devices or

move away from interfering area.

Move to a location with a clear view

of the sky. Enable ‘Send Location’.

Wait 10 seconds between location

transmission. Enable GPS.

Hold PAGE for 5 seconds to release

keylock..

The Rino is programmed to provide “pop-up” messages concerning operational characteristics and conditions.

Press in on the

CLICK STICK

to acknowledge a message and return to the current feature.

Radio Troubleshooting

Guide

190-00284-00_Prelim_FCC.indd 70 9/18/2003, 3:51:38 PM

Preliminary

The following data ﬁ eld options are available on the

Map, Navigation and Trip Computer Main Pages.

Bearing - The direction from your current location to a

destination.

Course - The direction from your starting location to a

destination.

Current Destination - The next waypoint on your

route.

Current Distance - The remaining distance to your

next waypoint.

Current ETA - The estimated time of day you will

arrive at your next waypoint.

Current ETE - The estimated time needed to arrive at

the next waypoint on your route.

Elevation - The altitude (height) above or below sea

level.

Final Destination - The last waypoint on your route.

Final Distance - The remaining distance to your ﬁ nal

destination.

Final ETA - The estimated time of day you will reach

your ﬁ nal destination.

Final ETE - The estimated time needed to reach your

ﬁ nal destination.

GPS Accuracy - The estimated accuracy of the GPS

signal.

Heading - Your moving direction.

Location (lat/lon) - Your current GPS position.

Location (selected) - The lat/lon of point deﬁ ned on

map.

Maximum Speed - The maximum speed the unit has

moved.

Moving Avg. Speed - Average speed of the unit

while moving.

Odometer - A running tally of distance travelled,

based upon the distance between second-by-second

position readings.

Off Course - The distance left or right you are from

the original course (path of travel).

Overall Avg. Speed - Your average speed.

Data Field

Deﬁ nitions

Appendix F

190-00284-00_Prelim_FCC.indd 71 9/18/2003, 3:51:38 PM

Preliminary

Data Field

Deﬁ nitions

Pointer - Indicates the direction to the next

destination.

Speed - Your rate of travel can be displayed in

miles per hour, kilometers per hour, or nautical miles

per hour.

Sunrise - The time at which the sun rises on this

day.

Sunset - The time at which the sun sets on this day.

Time of Day - The time for the selected time zone.

To Course - The compass direction you must go in

order to get back to the original course.

Trip Odometer - A running tally of distance

travelled since last reset.

Trip Time - Moving - A running tally of movement

time travelled since last reset.

Trip Time - Stopped - A running tally of stopped

time travelled since last reset.

Trip Time - Total - A running tally of all travel time

since last reset.

Turn - The angle difference (in degrees) between

the bearing to your destination and your current line

of travel. ‘L’ means turn Left. ‘R’ means turn Right.

Velocity Made Good - The speed at which you

are closing on a destination along a desired course.

Vertical Speed - Your rate of altitude gain/loss

over time.

Appendix F

190-00284-00_Prelim_FCC.indd 72 9/18/2003, 3:51:39 PM

Preliminary

Interface formats are selected from the Setup ‘Interface Page’ on page 55 of this

manual. See also page 68 for using the Rino with MapSource. The input/output lines

on your Rino unit are RS-232 compatible, allowing easy interface to a wide range of

external devices, including PC’s, differential beacon receivers, marine autopilots and /or

a second GPS receiver.

The NMEA 0183 version 3.0 interface format is supported by the Rino and enables

the unit to drive up to three NMEA devices.

NMEA 0183 Version 3.0 Approved Sentences:

GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, GPVTG, GPWPL,

GPBOD

Garmin Proprietary Sentences:

PGRME (estimated error), PGRMM (datum string), PGRMZ (altitude), PSLIB (beacon

receiver control)

DGPS (Differential GPS) corrections are accepted in RTCM SC-104 version 2.0 for-

mat through the ‘Data In’ line. The Garmin GBR 21 and GBR 23 are the recommended

beacon receivers for use with the Rino. Other beacon receivers with the correct RTCM

format may be used, but may not correctly display status or allow tuning control from

the GPS unit.

The Rino may be hard-wired to a serial connector using a Data Only Cable. Refer to

the wiring diagram and the Rino unit data connection illustrated below.

The PC Interface Cable provided with this unit allows you to connect your Rino to a

PC-compatible computer’s serial port.

Wiring Diagram

Cable View

Appendix G

190-00284-00_Prelim_FCC.indd 73 9/18/2003, 3:51:39 PM

Preliminary

Frequency Chart

Appendix H

1 67 14 107.2 27 167.9

2 71.9 15 110.9 28 173.8

3 74.4 16 114.8 29 179.9

4 77 17 118.8 30 186.2

5 79.7 18 123 31 192.8

6 82.5 19 127.3 32 203.5

7 85.4 20 131.8 33 210.7

8 88.5 21 136.5 34 218.1

9 91.5 22 141.3 35 225.7

10 94.8 23 146.2 36 233.6

11 97.4 24 151.4 37 241.8

12 100 25 156.7 38 250.3

13 103.5 26 162.2

1 462.5625 15 462.550

2 462.5875 16 462.575

3 462.6125 17 462.600

4 462.6375 18 462.625

5 462.6625 19 462.650

6 462.6875 20 462.675

7 462.7125 21 462.700

8 467.5625 22 462.725

9 467.5875

10 467.6125

11 467.6375

12 467.6625

13 467.6875

14 467.7125

Code Code Code Frequency

Frequency

Frequency Frequency

FRS

Channel

GMRS

Channel

NOTE: If you plan to

purchase FRS radios from

third party manufacturers

be aware that there are

CTCSS differences in some

radios. Some of the tones

on one radio may not be

available on other radios.

Charts showing the differ-

ent codes and manufactur-

ers can be located on the

World Wide Web.

190-00284-00_Prelim_FCC.indd 74 9/18/2003, 3:51:41 PM

Preliminary

Elevation .............................................. 18, 48

Exit Services ...........................................33-34

Exits.......................................................33-34

Exits, Nearest .........................................33-34

Fields, Data ............................... 18, 22, 25, 44

Find Address..........................................35-36

Find Cities................................................... 33

Find Contacts.............................................. 32

Find Exits...............................................33-34

Find Intersections...................................35-36

Find Last Found Place................................. 37

Find ‘N Go Menu ........................26-27, 31-37

Find Points of Interest ............................34-35

Find Waypoints........................................... 32

Frequency Chart.......................................... 74

Games Page .................................26-27, 62-63

Global Positioning System (GPS)............ iii, 48

GMRS License ...........................................ii-iii

GMRS Radio.................................... 2, 4, 8, 64

Goto............................................................ 38

Goto Line .................................................... 19

Heading Selection........................................ 54

Headset Type .............................................. 7-8

Hunt and Fish Page ..........................26-27, 60

Informational Picture............................2, 9-10

Initialization ................................................ 48

Interface Page .............................................. 55

Keylock ......................................................... 2

Location (Marking).................................28-29

Loading Map Data ................................. 55, 68

Lock On Road ............................................. 19

Main Menu Page.....................................26-27

Accessories.... .............................................. 67

Accuracy Circle ........................................... 15

Activate a Route .......................................... 43

Alarm Clock .....................................26-27, 58

Area Calculation Page.......................26-27, 61

Arrow, Panning............................................ 17

AutoZoom................................................... 19

Backlight Timer........................................... 56

Backlighting On/Off .................................... 56

Battery Level Indicator .................................. 3

Battery Saver Mode...................................... 56

Battery Type........................................... 56, 66

Beacon Receiver Setup................................. 55

Bearing Pointer.................................21-22, 43

Big Compass................................................ 22

Big Numbers ............................................... 25

Calculator Page ................................26-27, 58

Calendar Page ..................................26-27, 57

Call Button.......................................11, 62-63

Call Tone....................................................... 7

Cancel Goto .......................................... 16, 23

Cautions.................................................... iii-v

Change Course Pointer Scale....................... 22

Channels ....................................2, 4, 6, 64-66

Cities, By Name........................................... 33

Cities, Nearest ............................................. 33

Codes, Squelch...........................2, 4, 6, 64-66

Compass Ring ............................................. 21

Contact Bar ........................................... 12, 14

Contact, Deleting ........................................ 30

Contact Details............................................ 12

Contact List........................................... 12, 32

Contact, New .........................................11-12

Contact, Proximity ...................................... 47

Contrast ...................................................... 56

Course Pointer ............................................ 22

Data Fields ................................ 18, 22, 25, 44

Data Field Deﬁ nitions.............................71-72

Date and Time Setup ................................... 51

Detail, Map.................................................. 19

Differential GPS (DGPS) .........................55-56

Display Mode .............................................. 19

Index

190-00284-00_Prelim_FCC.indd 75 9/18/2003, 3:51:42 PM

Preliminary

Index

Map Datums...........................................52-53

Map Display ................................................ 14

Map Features......................................... 15, 19

Map Page................................................14-20

Map Page Options ....................................... 16

Map Page Panning.................................. 16-17

Map Page Setup.................................16,19-20

Map Scale.................................................... 15

MapSource Map Data ...................... 19, 55, 68

Mark a Waypoint................................... 28, 29

Mark Waypoint Page ..............................26-28

Measuring Between Waypoints.................... 20

Monitor .....................................................5-6

Moving a Route Waypoint ......................42-43

My ID...................................................3-4, 11

Navigation Page......................................21-23

Nearest (Waypoints, Cities, Exits, etc.) ...31-36

New Contact Page ..................................11-12

NMEA ................................................... 55, 66

Normal Mode.............................................. 56

North Reference .......................................... 54

North Up .............................................. 19, 50

Odometer...............................................24-25

Offset (Time) ............................................... 51

Orient Map.................................................. 19

Overall Average Speed................18, 24-25, 72

Page Sequence Setup ................................... 26

Panning (Map) .................................16-17, 28

Peer-to-peer....................................... 8, 11, 13

Position Format......................................52-53

Projecting a Point ........................................ 30

Proximity Page .................................26-27, 47

Radio Page................................................2-13

Radio Page Setup........................................7-8

Reset Trip Page .......................................24-25

Ring Tone ...................................................... 7

Roger Tone .................................................... 7

Routes ....................................................39-44

Creating.................................................. 39

Copying.................................................. 40

Deleting .................................................. 40

Naming................................................... 40

Editing...............................................40-42

Inverting................................................. 40

Navigating .........................................43-44

Route Map Page ................................. 42-43

Satellite Page ...............................26-27, 48-50

Saving the Tracklog ................................45-46

Scan ...........................................................5-6

Scanlist.......................................................... 6

Scramble (Voice) ..................................... 8, 13

Selecting a Page ........................................... 26

Send Location ................................... 8, 11, 13

Serial Number ............................................ vii

Setup Page...................................26-27, 51-56

Show Contact Bar........................................ 16

Show Data Fields Bar................................... 16

Show Map Only .......................................... 16

Software Version (Operating)....................... 56

Speciﬁ cations .............................................. 66

Stop Navigation..................................... 16, 23

Stopwatch Page ................................26-27, 59

Sun and Moon Page..........................26-27, 60

Symbol, User .......................... 3, 4, 11, 13, 63

Symbol, Waypoint ................................ 28, 30

Symbols, Status Bar ...................................... 3

System Setup............................................... 56

Talk Button.......................................11, 62-63

Text Size................................................ 16, 19

Time Format ............................................... 51

Time Zone................................................... 51

TracBack.................................................45-46

Track Logs........................................19, 45-46

Track Log Saving ......................................... 46

Track Log Setup........................................... 46

Tracks Page..................................26-27, 45-46

Track Up ............................................... 19, 50

Trip Computer Page ...............................24-25

Trip Odometer....................................... 24-25

Trip Time ...............................................24-25

Troubleshooting .....................................69-70

190-00284-00_Prelim_FCC.indd 76 9/18/2003, 3:51:43 PM

Preliminary

Index

Turning the GPS Receiver “Off” ..................... 7

Turning the Radio “Off”................................. 7

Unit Features........................................... 1, 66

Units of Measure ....................................52-53

Units Page ..............................................52-53

User Symbol............................ 3, 4, 11, 13, 63

UTC Offset.................................................. 51

Vibrate .......................................................... 7

View Waypoints on Route ............................. 9

VOX Level..................................................... 8

WAAS, Enable/Disable................................. 56

Warnings................................................... iii-v

Waypoints .......................................................

Deleting .................................................. 30

Editing.................................................... 30

List ......................................................... 32

Marking.................................................. 29

Naming................................................... 29

Projecting ............................................... 30

Proximity................................................ 47

Sending ........................................ 8, 11, 13

Symbols............................................ 28, 30

What is FRS ...........................................64-65

Wiring Diagram (Interface).......................... 73

Zooming In/Out ......................................... 15

Zoom Ranges............................................... 15

190-00284-00_Prelim_FCC.indd 77 9/18/2003, 3:51:44 PM

Garmin International, Inc.

1200 East 151st Street, Olathe, Kansas 66062, U.S.A.

Garmin (Europe) Ltd.

Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K.

Garmin Corporation

No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan

www.garmin.com

Part Number 190-00284-00 Rev. A

For the latest free software updates throughout the

life of your Garmin products, visit the Garmin web site

at www.Garmin.com

Preliminary

190-00284-00_Prelim_FCC.indd 78 9/18/2003, 3:51:44 PM

Garmin 00726 FRS/GMRS UHF Transceiver User Manual 190 00284 00 Prelim FCC indd

Garmin International Inc FRS/GMRS UHF Transceiver 190 00284 00 Prelim FCC indd

RINO 130

Navigation menu

Namespaces

Views

Navigation