Garmin 00861 FRS/ GMRS Transceiver (Body worn/ held to face) User Manual Rino520 530 prelim indd

Garmin International Inc FRS/ GMRS Transceiver (Body worn/ held to face) Rino520 530 prelim indd

UserManual.wiki >

00861 User Manual

USERS MANUAL

owner’s manual 5302-way radio & personal navigator ®PRELIMINARYRino520_530_prelim.indd 1 1/25/2005 5:00:18 PM

© Copyright 2005 Garmin Ltd. or its subsidiariesAll rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin. Garmin hereby grants permission to download a single copy of this manual onto a hard drive or other electronic storage medium to be viewed and to print one copy of this manual or of any revision hereto, provided that such electronic or printed copy of this manual must contain the complete text of this copyright notice and provided further that any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.Information in this document is subject to change without notice. Garmin reserves the right to change or improve its products and to make changes in the content without obligation to notify any person or organization of such changes or improvements. Visit the Garmin Web site (www.garmin.com) for current updates and supplemental information concerning the use and operation of this and other Garmin products.Garmin®, AutoLocate®, Personal Navigator®, MapSource®, TracBack®, BlueChart®, and Rino® are registered trademarks of Garmin Ltd. or its subsidiaries and may not be used without the express permission of Garmin.June 2005 Part Number 190-00NNN-00 Rev. A Printed in TaiwanGarmin International, Inc. 1200 East 151st Street Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 800/800.1020 Fax 913/397.8282Garmin (Europe) Ltd. Unit 5, The Quadrangle Abbey Park Industrial Estate Romsey, SO51 9DL, U.K. Tel. 44/0870.8501241 Fax 44/0870.8501251Garmin Corporation No. 68, Jangshu 2nd Road Shijr, Taipei County, Taiwan Tel. 886/2.2642.9199 Fax 886/2.2642.9099Rino520_530_prelim.indd 2 1/25/2005 5:00:18 PM

Rino® 530 Owner’s Manual iPRELIMINARYINTRODUCTIONThank you for choosing the Garmin® Rino® 530 (Radio Integrated with Navigation for the Outdoors). To get the most from your new Rino 530, read through the Quick Start Guide ﬁrst, then this Owner’s Manual to understand all of the operating features.The Quick Start Guide describes the process of navigating the Main Pages and the Option Menus, along with some basic unit operations to familiarize you with your new Rino 530 right out of the box. Read the Quick Start Guide ﬁrst.This manual is organized into the following sections:The Introduction section provides FCC, safety, warranty, and product registration information, as well as the Table of Contents. The Getting Started section provides basic information about the Rino 530. The Unit Operation section provides information on each of the six Main Pages, listed in the same order as viewed on the unit. The section for each Page provides an overview that discusses the page, how it functions, and step-by-step instructions for using the page and its features. It also includes an overview of some additional features and step-by-step instructions for using the features.The Appendix includes additional information about the Rino 530The Index provides keywords and the pages on which they appear.INTRODUCTIONRino520_530_prelim.indd 1 1/25/2005 5:00:19 PM

ii Rino® 530 Owner’s ManualPRELIMINARYINTRODUCTION > TABLE OF CONTENTSIntroduction .............................................................iGetting to Know Your Rino 530 ............................1Front of the Rino 530 ...............................................2Back of the Rino 530 ................................................ 3Main Display Pages .................................................. 4Operating the Rino 530 ............................................ 5Status Bar Overview ................................................6Unit Operation ........................................................7Radio Page ................................................................ 7Initializing the Rino 530 ................................................ 7Using My ID and Symbol Fields ................................... 8Setting the Channel and Squelch Code ........................ 10Scanning and Monitoring ............................................ 12Radio Page Option Menu ............................................ 14Setup Radio ............................................................ 14Setup Tones ............................................................ 16Setup Scanlist ......................................................... 16Use Weather Radio ................................................. 17Turn Radio/GPS On/Off ........................................ 18Informational Picture ................................................... 18GPS Status ............................................................. 18Radio Transmission Status .................................... 18Mark Waypoint’s Indicators ........................................ 19Using the Rino 530 Radio Features ...................... 20Peer-to-Peer Positioning .............................................. 20New Contact Page Overview ....................................... 20Sending a Location ...................................................... 23Map Page .................................................................24Map Page Options ....................................................... 26Using the Pan Map Option .......................................... 27Programming the Data Fields ...................................... 28Setting up the Map ....................................................... 29Measuring Distance ..................................................... 31Navigation Page .....................................................32Using the Navigation Page .......................................... 32Navigation Page Options ............................................. 34Using Sight ‘N Go ....................................................... 35Calibrating the Compass .............................................. 35Altimeter Page ........................................................ 37Altimeter Page Options ............................................... 38Viewing Pressure/Elevation Plots ................................ 39Adjusting the Zoom Ranges ........................................ 39Viewing Points ............................................................. 40Resetting Data .............................................................. 40Calibrating the Altimeter ............................................. 41Rino520_530_prelim.indd 2 1/25/2005 5:00:19 PM

Rino® 530 Owner’s Manual iiiPRELIMINARYINTRODUCTION > TABLE OF CONTENTSProgramming Data Fields ............................................ 41Trip Computer Page ............................................... 42Trip Computer Page Options ....................................... 42Main Menu Page ..................................................... 43Using the Main Menu .................................................. 43Main Menu Options ..................................................... 45Shortcuts Menu ...................................................... 46Waypoints ...............................................................47Mark Waypoint Page ................................................... 47Creating Waypoints ..................................................... 48Projecting a Waypoint .................................................. 49Editing a Waypoint ...................................................... 49Find ‘N Go ............................................................... 51Finding a Waypoint ...................................................... 52Finding a Contact ......................................................... 54Finding a City .............................................................. 55Finding an Exit ............................................................ 56Finding a Point of Interest ........................................... 57Finding an Address or Intersection .............................. 59Finding a Last Found Place ......................................... 61Weather Radio ........................................................ 62Sending a Note ....................................................... 63Using a Goto ........................................................... 64Routes Page ............................................................65Creating and Using a Route ......................................... 65Editing a Route ............................................................ 66Adding or Editing from the Route Map Page .............. 69Navigating a Route ...................................................... 70Stopping Navigation .................................................... 71Data Fields for the Route Page .................................... 71Tracks Page ............................................................ 72Using the TracBack Feature ........................................ 73Setting up the Track Log ............................................. 74Proximity Page .......................................................75Satellite Page .......................................................... 76Sky View Graphic ........................................................ 76WAAS .......................................................................... 77Satellite Strength .......................................................... 77Satellite Page Options .................................................. 78Setup Pages ............................................................ 80Time Setup Page .......................................................... 80Units Setup Page .......................................................... 81LORAN TD Format ............................................... 82Display Setup Page ...................................................... 83Heading Setup Page ..................................................... 84Interface Setup Page .................................................... 85Rino520_530_prelim.indd 3 1/25/2005 5:00:20 PM

iv Rino® 530 Owner’s ManualPRELIMINARYINTRODUCTION > TABLE OF CONTENTSSystem Setup Page ....................................................... 87Calendar .................................................................. 88Alarm Clock ............................................................90Calculator ................................................................ 91Stopwatch ............................................................... 92Stopwatch Lap Options ............................................... 92Sun & Moon ............................................................93Hunt & Fish ............................................................. 94Area Calculator ....................................................... 95Games .....................................................................96Memory Race .............................................................. 96Waypoint Bomber ........................................................ 97Clothesline ................................................................... 98Assimilation ................................................................. 98Beast Hunt ................................................................... 98Appendix ..............................................................99What is FRS? .......................................................... 99FRS Features ................................................................ 99FRS Limitations ......................................................... 100GMRS ........................................................................ 100Speciﬁcations ....................................................... 101Physical ...................................................................... 101Performance ............................................................... 101Radio .......................................................................... 102Power ......................................................................... 102Accessories .......................................................... 103Transferring MapSource Data ............................. 104GPS Troubleshooting Guide ...............................106Radio Troubleshooting Guide ............................. 107FRS Frequency Chart ................................................ 108Weather Radio Frequency Chart ................................ 108GMRS Frequency Chart ............................................ 109Data Field Deﬁnitions ........................................... 110Interface Information ............................................ 112FCC Compliance Information .............................. 113FCC Licensing Information ................................. 114Limited Warranty .................................................. 115Software License Agreement .............................. 117Product Registration .................................................. 117Contact Garmin .......................................................... 117Warnings and Cautions ....................................... 118Index ...................................................................121Rino520_530_prelim.indd 4 1/25/2005 5:00:20 PM

Rino® 530 Owner’s Manual 1PRELIMINARYGETTING STARTED > GETTING TO KNOW YOUR RINO 530GETTING TO KNOW YOUR RINO 530The Rino 530 (Radio Integrated with Navigation for the Outdoors) is a 7.6 ounce, 12 channel GPS-enabled handheld device. It has integrated radio functionality to provide two-way communications for up to two miles using 14 FRS (Family Radio Service) channels. The Rino 530 also provides 8 high-performance GMRS (General Mobile Radio Service) channels and 8 GMRS repeater channels (U.S. versions only) for up to ﬁve miles. GMRS repeater channels are not approved for use by the Canadian government, so they are disabled on Rino 530 units sold in Canada.The Rino 530 has three user-selectable power levels: 0.5 W, 2.0 W, and 5.0 W. Keep in mind that FRS channels only transmit at 0.5 W, even if you select a higher power level. The Rino 530 also has a rechargeable lithium-ion battery pack with charger. If you wish, you can purchase an optional alkaline battery pack (however, transmit power is limited to 2.0 W when using this pack).The unit contains built-in cartography of a North American basemap that includes Interstate and State Highways and Exit Information. Using MapSource®, Garmin’s map data software (not included), the Rino 530 can display up to 24 MB of a variety of different map information. We currently offer several mapping options that are compatible with the Rino 530 including our MetroGuide, Topo, Fishing Hot Spots, and BlueChart® data. Check your local dealer or the Garmin Web site (www.garmin.com) for a complete listing of MapSource products.Garmin designed your Rino 530 with you, the user, in mind. The Rino 530 is waterproof to IPX7 standards and is rugged enough to endure the most trying use. Garmin’s friendly user interface allows you to start navigating with your new GPS in no time. Your Rino 530 can provide one more critical beneﬁt: peace of mind. With your Rino 530 you know where you are, where you’ve been, and where you’re going. And since you’ll always know the way back home, you can concentrate on what you set out to do; explore the great outdoors.Rino520_530_prelim.indd 1 1/25/2005 5:00:20 PM

2 Rino® 530 Owner’s ManualPRELIMINARYGETTING STARTED > FRONT OF THE RINO 530Front of the Rino 530Power button:• Press and hold to turn the unit On/Off• Press to adjust contrast and backlightingCall button:• Press to send out Call Tone• Sends position when released (if enabled)Talk button:• Press and hold to talk• Sends position when released (if enabled)LCD DisplayPage/Quit button:• Press to cycle through main pages• Used to quit or escape menu itemsVolume (V) button:• Press to open volume control windowMicrophone:• Hold unit 3-4 inches away when talkingZoom/Map (Z) button:• From the Map Page, press to open Zoom control window• From any other page, press to display Map Page and press again to open Zoom controlSpeaker Thumb Stick• Press In to enter highlighted options and to conﬁ rm messages• Move Up, Down, Right or Left to move through lists, highlight ﬁ elds, on-screen buttons, icons, enter data, or move the map panning arrow• Press In and hold to display Shortcuts Menu.Rino520_530_prelim.indd 2 1/25/2005 5:00:25 PM

Rino® 530 Owner’s Manual 3PRELIMINARYGETTING STARTED > BACK OF THE RINO 530Back of the Rino 5302-way FRS/GMRS AntennaHeadset Connector with Weather capExternal Power And Data Connector with Weather capGPS AntennaBattery Compartment CoverBelt Clip Connector MountBattery Compartment D-RingMount Alignment NotchesRino520_530_prelim.indd 3 1/25/2005 5:00:26 PM

4 Rino® 530 Owner’s ManualPRELIMINARYGETTING STARTED > MAIN DISPLAY PAGESMain Display PagesAll of the information you need to operate the Rino 530 can be found on six default main pages (or display screens). Simply press and release the Page button to cycle through the Radio Page, Map Page, Navigation Page, Altimeter Page, Trip Computer, and Main Menu Page. You can also access the Main Pages by pressing the on-screen Main Page button . Customize the Main Page sequence through the Main Menu (see page 45).Main MenuRadio Page Map PageTrip ComputerNavigation PageAltimeter PageRino520_530_prelim.indd 4 1/25/2005 5:00:27 PM

Rino® 530 Owner’s Manual 5PRELIMINARYGETTING STARTED > OPERATING THE RINO 530Operating the Rino 530For best results, you should initialize the GPS receiver in your Rino 530 unit before you use it the ﬁrst time. See page 7 for instructions on initializing the unit. For most accurate results, the compass and altimeter should also be calibrated. Refer to the “Calibrating the Compass” and “Calibrating the Altimeter” sections for complete information.The Rino 530 is programmed to provide “pop-up” messages concerning operational characteristics and conditions. Press the Thumb Stick In to acknowledge a message and return to the current feature.To use the Thumb Stick:• Press In to enter highlighted options and to conﬁrm messages• Move Up, Down, Right or Left to move through lists, highlight ﬁelds, on-screen buttons, icons, enter data, or move the map panning arrow• Press In and hold to display Shortcuts Menu.To use the page Option Menu:1. Highlight the Option Menu on-screen button at the top of the display screen and then press the Thumb Stick In to open the menu.2. Highlight the desired menu option and press the Thumb Stick In to activate the option.3. To close without making a selection, move the Thumb Stick to the Right.To lock/unlock the buttons:1. Press and hold the Thumb Stick In to access the Shortcuts Menu. Highlight Enable Keylock and press the Thumb Stick In. The Talk button is now locked.2. To unlock, press and hold the Page button until “Keylock Disabled” is displayed (about 5 seconds).Rino520_530_prelim.indd 5 1/25/2005 5:00:28 PM

6 Rino® 530 Owner’s ManualPRELIMINARYGETTING STARTED > STATUS BAR OVERVIEWStatus Bar OverviewThe Status Bar at the top of the screen displays on all the available Main Pages. As you move around any of the Main Pages, the current page’s title brieﬂy displays (3 seconds) and then is replaced by the Status Bar. The current settings and operational icons on the Status Bar are displayed as you operate the unit. The available icons are: Battery Full (Each bar represents 1/4 charge) Battery 1/2 charge Battery Empty Using External Power Receiving Radio signal Transmitting Radio signal Backlight On Radio On Peer-To-Peer On/Location Ready to Send Keylock On Alarm Clock On GPS On, Position Ready GPS On, Position Not Ready Compass On (Press and hold the Zoom key to turn the compass on/off) Weather Alert OnRino520_530_prelim.indd 6 1/25/2005 5:00:28 PM

Rino® 530 Owner’s Manual 7PRELIMINARYUNIT OPERATION > RADIO PAGEUNIT OPERATIONRadio PageThe Radio Page is the ﬁrst of the default Main Pages. This page provides the user interface for FRS (Family Radio Service) and GMRS (General Mobile Radio Service) radio operations. Garmin Rino units work with 3rd party FRS/GMRS radios, provided the other radios use standard FRS/GMRS frequencies. To take full advantage of the Rino features, communicate with other Rino users.The Radio Page also provides access to the Weather Radio, which provides a constant update of current weather conditions. The Weather Alert feature further enhances the Weather Radio by automatically notifying you of any weather alerts, even when the Weather Radio is not is use and the FRS/GMRS radio is in use! These features are helpful while outdoors or planning a road trip. Also use this page to control and setup the radio, view current settings and see informational graphics of the unit’s operation.Radio PageInitializing the Rino 530To take full advantage of all of the Rino 530 features, the GPS receiver must be initialized. The initialization process allows the Rino 530 to receive and store satellite information and begin using the satellites for navigation. Initialization is automatic, should only take a few minutes, and only needs to be done the ﬁrst time the unit is used.Rino520_530_prelim.indd 7 1/25/2005 5:00:28 PM

8 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > RADIO PAGETo initialize the unit:1. Take the Rino 530 outside where it has an unobstructed view of the sky and turn it on.2. The unit begins to search for satellite signals. “Tracking Satellites” is displayed while the unit is initializing.3. Initialization should take no more than ﬁve minutes. When the GPS is initialized and ready for navigation, the message “3D Accuracy” is displayed on the Radio Page.Using My ID and Symbol FieldsThe My ID ﬁeld allows you to enter a name and symbol that appears on other Rino units as you communicate with them. You may enter a name using a combination of up to 10 letters, numbers, or spaces. The Symbol ﬁeld allows you to choose a face icon from a list to further personalize your ID.My ID FieldSymbolTo enter a name:1. Using the Thumb Stick, highlight the My ID ﬁeld. Press the Thumb Stick In to activate the ﬁeld and display the keyboard.2. Move the Thumb Stick Up, Down, Left, or Right to highlight the Clear ﬁeld, then press the Thumb Stick In to clear the default Name ID. 3. To enter a new ID, use the Thumb Stick to move the cursor to the desired character (letter, number, or a space). Press the Thumb Stick In to select that highlighted character. Choose Back to delete the character to the left of the cursor. You may enter up to 10 characters for your ID.Rino520_530_prelim.indd 8 1/25/2005 5:00:29 PM

Rino® 530 Owner’s Manual 9PRELIMINARYUNIT OPERATION > RADIO PAGEEntering a name with the on-screen keyboard4. When you have entered your new ID, use the Thumb Stick to highlight OK and then press the Thumb Stick In.To change the user symbol:1. Using the Thumb Stick, highlight the face symbol to the right of the My ID ﬁeld. Press the Thumb Stick In to show a list of available face icons.2. Move the Thumb Stick Up or Down to scroll through the selections. Because not all the selections can ﬁt in the window, a slider bar on the right side indicates your current position in the list.Changing the user symbol TIP: Hold the Thumb Stick Up or Down to scroll through the list more quickly. Once you reach the end of the list, you can wrap back to the top or bottom by releasing the Thumb Stick then pressing in the same direction again. This same method may also be used on other selection windows.3. Once you have highlighted the desired icon, press the Thumb Stick In.Rino520_530_prelim.indd 9 1/25/2005 5:00:29 PM

10 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > RADIO PAGESetting the Channel and Squelch CodeThe Rino 530 has a total of 22 channels (not including GMRS repeater channels) and 38 squelch codes to select from using the Channel and Code ﬁelds. Channels 1–7 and 15-22 GMRS channels, 8-14 are FRS channels, and 15R–22R are for GMRS repeater channels (repeater channels are available U.S. units only and are disabled by default). To communicate with other Rino and FRS/GMRS users, you must be on the same channel and squelch code. Garmin Rino units work with 3rd party FRS/GMRS radios, provided the other radios use standard FRS/GMRS frequencies. A chart of Rino frequencies may be found in the “Appendix.”Squelch codes allow you to hear calls from only speciﬁc persons. Thirty-eight (38) Squelch Codes (called Continuous Tone Coded Squelch System or CTCSS) allow your Rino 530 to ignore unwanted calls from other persons using the same channel. Simply select the same squelch code (number) as selected by the other person(s) with which you will communicate.Select from FRS 1–14, GMRS 15–22 (with GMRS enabled), and 15R–22R GMRS repeater channels (with GMRS and Repeater Channels enabled). NOTE: Squelch codes do not cause your conversa-tion to be private. They only allow you to ﬁlter out other users on the same channel, so you only hear the radios you want to hear. Squelch Codes are not a scrambling system!Rino520_530_prelim.indd 10 1/25/2005 5:00:30 PM

Rino® 530 Owner’s Manual 11PRELIMINARYUNIT OPERATION > RADIO PAGESetting the squelch code to 0 (squelch code off) allows you to hear all activity on the selected channel, but you must be set to the same squelch code as the other person(s) to transmit back. See the “Appendix” for a table listing all of the 38 Squelch Codes and their frequencies.As you change the main channels, the Rino 530 remembers the last channel/squelch code combination that you were using. For example, you may set the unit channel to 5 and squelch code to 21, then change the main channel to 8 and squelch code to 2. If you change the channel back to 5, the squelch code changes back to its previous setting of 21. See the “Appendix” for more information on FRS/GMRS and its operational aspects.Choose from 38 squelch codes. Setting the unit to zero will allow you to hear all transmissions on that channel, but you must be on the same squelch code to radio back.To change the Channel and/or Squelch Code:1. Using the Thumb Stick, highlight the Channel or Code ﬁeld and then press the Thumb Stick In to show a list of available channels/squelch codes.2. Move the Thumb Stick Up or Down to scroll through the selections. Because not all the items ﬁt in the window, a slider bar on the right side indicates your current position in the list.3. Once you have highlighted the desired selection, press the Thumb Stick In.Rino520_530_prelim.indd 11 1/25/2005 5:00:30 PM

12 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > RADIO PAGEScanning and MonitoringThe Scan option allows you to scan through the available channels for voice activity. As the unit scans and receives a signal (or if you transmit), it stops on that channel/squelch code for a few seconds, then continues scanning. When the Rino 530 is scanning and it receives an incoming signal, the Rino 530 automatically decodes the Squelch Code used by the incoming signal. The Rino 530 then uses that Squelch Code when it transmits back to that unit.You may use the Set Scanlist option to pick which channels/squelch codes to scan. Scanning through the all the channels can take time: Selecting only speciﬁc channels/squelch codes decreases the scan time and helps prevent the chances of missing a transmission. The Scanlist also has Option Menu choices to Scan Current Codes or Scan All Codes. Choosing Scan Current Codes scans only the Channel and Squelch Code combination in memory.The Monitor option lets you listen to a single channel for any activity, including static and weak voice signals. The Rino series automatically squelches a frequency to ﬁlter out unwanted noise. Using the Monitor option temporarily turns off the automatic squelch, allowing you to hear the open channel. If you see a broken transmission symbol (see page 18), there is activity on your selected channel, but the incoming signal does not match the Squelch Code your unit is using. You may choose to monitor a channel if you wish to hear all the activity on a channel.To scan or monitor a channel(s):1. Using the Thumb Stick, highlight the Scan or Monitor button and then press the Thumb Stick In. Scan starts searching through the available channels. Monitor opens the channel to listen to any radio transmissions on that channel.2. To stop using either option, highlight the button with the Thumb Stick and press In.Rino520_530_prelim.indd 12 1/25/2005 5:00:30 PM

Rino® 530 Owner’s Manual 13PRELIMINARYUNIT OPERATION > RADIO PAGEThe Code ﬁeld is blank when the unit is scanning or monitoring channels.To setup a Scanlist:1. Using the Thumb Stick, highlight the Option Menu on-screen button and press In. Highlight Setup Scanlist and press the Thumb Stick In.2. To add/remove a channel from the list, highlight the channel and press the Thumb Stick In to add/remove the check mark in front of the name. Only channels that are checked will be scanned.3. To select all channels or clear all channels, highlight either the Select All or Clear All buttons and press the Thumb Stick In.4. To Scan Current Codes, highlight the Option Menu and press the Thumb Stick In. Choose the desired setting and press the Thumb Stick In.Scanlist PageThe Radio Page Option Menu provides the following: Setup Radio, Setup Tones, Setup Scanlist, Use Weather Radio/Use FRS/GMRS Radio, Turn Radio Off/On, Turn GPS Off/On, and Enable Weather Alert. Refer to the following pages for explanations of each item in the Radio Page Option Menu.Rino520_530_prelim.indd 13 1/25/2005 5:00:31 PM

14 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > RADIO PAGERadio Page Option MenuThe Radio Page Option Menu allows you to customize aspects of your Rino 530, such as setting up the radio, programming call and ring tones, and setting up a scanlist.Setup RadioThe Setup Radio option displays the Radio Setup Page. This page determines how the radio functions and enables you to adjust the radio operation to your needs. The following options are available:Radio Page Option Menu Setup Radio PageSend Location—Enables/disables the peer-to-peer positioning feature. See the “Peer-to-Peer” section for more on this feature.Allow Polling—Enables/disables your Rino 530’s ability to respond to a poll from another Rino. VOX Level—Controls the sensitivity level of any Voice Operated Transmission (VOX) accessory. VOX accessories allow you to use the unit hands-free. A lower VOX setting is recommended for quiet environments while a higher VOX setting should be used in noisy environments. Setting the VOX level to 5 is recommended for most environments, but it may be necessary to adjust the level to achieve the desired voice trigger level. You will hear yourself talking in the headset when transmitting successfully using VOX.Scramble—Adds a level of security to your conversations. When On, the voice transmission sounds garbled to other non-scrambled Rino units, as well as other 3rd party radios.Rino520_530_prelim.indd 14 1/25/2005 5:00:33 PM

Rino® 530 Owner’s Manual 15PRELIMINARYUNIT OPERATION > RADIO PAGE NOTE: When Scramble is set to On, in order for peer-to-peer and Send Location features to work, the receiving radio must have Scramble enabled also.GMRS Radio—Use this option to turn On/Off GMRS channels 15–22. When you turn GMRS channels off, channels 15–22 will be disabled and channels 1–7 will become FRS channels (GMRS interstitial). Remember, you must obtain a license to operate GMRS channels in the U.S. See the “FCC Licensing Information” section and the “Appendix” for more information on using GMRS channels.Repeater Channel—Use this option to turn On/Off GMRS repeater channels 15R–22R. This option is only available when GMRS is enabled. GMRS repeater channels are not available in Rino units sold in Canada.Headset Type—Allows you to choose which accessory headset or microphone you are using with the unit, or have the unit automatically detect the type. If you use more than one type of headset or microphone, you need to set the unit to Ask When Detected before changing accessories. NOTE: If the headset has a PTT (Push to Talk) button, it must be pressed for the unit to detect the headset. Microphone Sensitivity—Allows you to set the sensitivity of the internal microphone and the sensitivity of a headset microphone.Rino520_530_prelim.indd 15 1/25/2005 5:00:33 PM

16 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > RADIO PAGESetup TonesCall Tone—When the Call button is pressed, an attention tone is transmitted. This option allows you to choose one of ten tones.Roger Tone—When the Talk button is released, a tone is sent to signify the end of the transmission. This option allows you to choose one of four tones, or set the tone to Off.Ring Tone—When an incoming transmission is received, an attention tone will sound. This option allows you to choose one of ten tones or set the tone to Off. The Ring tone will not sound again until there has been 45 seconds of radio inactivity.Vibrate—Choose from On or Off to have the unit vibrate when an incoming transmission is received. Once received, the unit will not vibrate again until there has been 45 seconds of radio inactivity.On/Off Tone—Enable or disable the tone the unit makes when it is turned on and off. Message Tone—Choose from On or Off to have the unit emit a tone when a message or note is received.Setup Tones PageSetup ScanlistRefer to “Scanning and Monitoring” for complete information about this feature and the options in this page.Setup Scanlist PageRino520_530_prelim.indd 16 1/25/2005 5:00:33 PM

Rino® 530 Owner’s Manual 17PRELIMINARYUNIT OPERATION > RADIO PAGEUse Weather RadioThe Weather Radio provides a constant update of the weather conditions, which is helpful while outdoors or planning a road trip. The Weather Alert further enhances the Weather Radio by automatically broadcasting any weather alerts if you are not actively transmitting or receiving on the radio.Select the Radio Page Option Menu button . Press the Thumb Stick In when Use Weather Radio is highlighted to turn on the weather radio. You can also access the Weather Radio through the Shortcuts Menu.When the Weather Radio is on, a tower emitting signals is shown in the informational picture on the Radio Page, as shown to the right. The FRS/GMRS radio cannot be used when the Weather Radio is on. Also, you cannot scan or monitor FRS/GMRS channels when the Weather Radio is in use. The audio is unmuted when the Weather Radio is on so that you can listen to weather broadcasts.Change the Weather Radio channel in the same manner as changing the FRS/GMRS radio channel. There are seven Weather Radio channels (1 through 7) available.Radio Page with Weather Radio OnChanging the Weather Radio ChannelWhen the Weather Radio is on, Enable Weather Alert is added at the bottom of the Option Menu. Press the Thumb Stick In when Enable Weather Alert is highlighted to turn the feature on. You can then turn the Weather Radio off and continue normal FRS/GMRS radio operations. Rino520_530_prelim.indd 17 1/25/2005 5:00:34 PM

18 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > RADIO PAGEWhen a Weather Alert tone is detected, the Rino 530 automatically turns on the Weather Radio and broadcasts the Weather Alert if you are not actively transmitting or receiving on the radio. The volume changes to 3/4 the maximum when a Weather Alert is broadcast. Select Disable Weather Alert to turn off this feature.To turn the weather radio off, press the Thumb Stick In when Use FRS/GMRS Radio is highlighted. This switches the Rino 530 back over to the FRS/GMRS radio operation.Turn Radio/GPS On/OffPress the Thumb Stick In on either of these two options to toggle them from on to off. For example, to turn GPS Off, press the Thumb Stick In when Turn GPS Off is highlighted.Informational PictureThe Informational Picture on the bottom half of the Radio Page features Garmin’s Mr. Mark Waypoint showing current GPS and radio status, and radio actions. As you operate the unit, the graphics change depending on what actions you are taking and the unit settings.GPS StatusFour satellites are shown on at the top of the picture along with descriptive text to indicate GPS reception status. As the unit collects satellite information, the satellite symbols ﬂash alternately until all four are steady to indicate a 3D position ﬁx. The more satellites that are steady, the better your position ﬁx.Radio Transmission Status As radio signals come in, signal wave symbols display to the left of Mark Waypoint. Fragmented (or broken) signal symbols are shown to indicate activity on that channel. Audio remains muted because the incoming signal does not match the squelch code your unit is set to.Rino520_530_prelim.indd 18 1/25/2005 5:00:34 PM

Rino® 530 Owner’s Manual 19PRELIMINARYUNIT OPERATION > RADIO PAGEMark Waypoint’s IndicatorsThe Mark Waypoint ﬁgure displays several different icons, depending on what you are doing. See the following illustrations for more information.GPS On; FRS/GMRS Radio Off; GPS operation onlyGPS and FRS/GMRS Radio On; Ready to transmit PositionGPS and Weather Radio On (FRS/GMRS Radio Off)GPS and FRS/GMRS Radio On; Ready to transmit Position; Transmitting on FRSGPS and FRS/GMRS Radio On; Position not ready; Transmitting on GMRSGPS and FRS/GMRS Radio On; Ready to transmit Position; Receiving transmissionGPS and FRS/GMRS Radio On; Ready to transmit Position; Activity on channel.GPS and FRS/GMRS Radio On; Position transmittedGPS and FRS/GMRS Radio On; Ready to transmit Position; Position received from other Rino userGPS Off; FRS/GMRS Radio On; Position sending not availableRino520_530_prelim.indd 19 1/25/2005 5:00:36 PM

20 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > USING THE RINO 530 RADIO FEATURESUsing the Rino 530 Radio FeaturesYour Rino 530 unit provides many features to enhance your radio experience, such as transmitting your location or any location and receiving contact information. This section reviews some of the advanced radio features. Refer to the “Features” section for information on all of the features of the Rino 530.Peer-to-Peer PositioningThe Rino 530’s most unique feature is being able to send its location to another Rino, which is called Peer-to-Peer positioning. With peer-to-peer positioning enabled (see the “Setup Radio” section) and a GPS position, whenever you press and release either the Call button or the Talk button, the Rino 530 automatically sends out its location. This information is available to all other Rino users that are monitoring the same channel and squelch code. This feature allows you to track the movement of other Rino users and even navigate to their location. Locations may only be sent once every 30 seconds due to FCC restrictions. Your Rino 530 can respond to polling requests from other units more frequently. To transmit your location to other Rino users:1. Enable Send Location (see the “Setup Radio” section).2. Press and release either the Talk or Call button. A ﬂag on the top Status Bar or in Mark’s hand indicates the unit is ready to transmit its position.New Contact Page OverviewThe ﬁrst time that a signal is received from another Rino user, a New Contact page is displayed. From the New Contact page you can show their location on your Map, Goto their location, or add them to your contact list (select OK). Press Page to ignore this contact.New Contact PageName and SymbolContact Information FieldRino520_530_prelim.indd 20 1/25/2005 5:00:37 PM

Rino® 530 Owner’s Manual 21PRELIMINARYUNIT OPERATION > USING THE RINO 530 RADIO FEATURESThe Rino 530 can manage up to 50 contacts at any time. Each time you receive a signal from a contact, your map is updated showing their new position. A Track Log of their movement is created and shown on your map (see the “Track Logs” section). After a contact has been established, a “<contact name> Updated” message brieﬂy appears at the bottom of your display each time the contact updates.All contacts are listed on a Contact List Page and also displayed in the Contact Bar on the Map Page (see the “Map Page” section). Contacts behave like waypoints and count towards the 500 maximum waypoint total. If the contact did not have a GPS location on the last transmission, a ? mark appears below the ﬂag. To view the contact details (such as Direction, Elevation, Timestamp, Location, and Notes that have up to 30 characters), highlight the details ﬁeld and press Left or Right on the Thumb Stick to change to the next data ﬁeld.Press Left or Right on the Thumb Stick to view different contact data.To accept a new contact:1. When a new contact is received, the New Contact page automatically appears. 2. Highlight OK and press the Thumb Stick In. If you do not select OK, the contact is not saved.Rino520_530_prelim.indd 21 1/25/2005 5:00:37 PM

22 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > USING THE RINO 530 RADIO FEATURESTo review a contact and contact details:1. From the Map Page, highlight the desired contact on the Contact Bar and press the Thumb Stick In. As you highlight the contacts on the Contact Bar, the Map page centers the map on that contact and display its name, direction and distance near the top of the screen.Or1. Press the Thumb Stick In and hold it until the Shortcuts Menu is displayed. Highlight Find ‘N Go and press the Thumb Stick In.2. Highlight Contacts and press the Thumb Stick In.3. From the Contacts List, select the desired contact and press the Thumb Stick In.To change contact details:1. The Elevation, Position and Note ﬁelds may be manually edited. Select the desired ﬁeld and press the Thumb Stick In.2. For Notes, highlight Edit and press In to start entering data, up to 30 characters. For other ﬁelds, highlight the ﬁeld and press the Thumb Stick In to start changing the data. 3. Highlight OK and press In when done.To view a contact on the Map Page:1. From the Contact Review Page, highlight Map and press the Thumb Stick In.2. Press the Page button when done to return to the Contact Review Page.Rino520_530_prelim.indd 22 1/25/2005 5:00:37 PM

Rino® 530 Owner’s Manual 23PRELIMINARYUNIT OPERATION > USING THE RINO 530 RADIO FEATURESSending a LocationAnother feature is the ability to send a speciﬁc location to other Rino users. This comes in handy when you are trying to round-up the group or you just want to meet at a speciﬁc location. You may send any point found from the Find ‘N Go menu. If the unit needs to wait until 30 seconds have elapsed since the last position transmission, a “Waiting to send location...” message appears until the unit is able to transmit. If a location is sent more than once, a number is automatically added to the end of the name (for example: CAMP, CAMP 1, CAMP 2, etc.).To send a location, highlight the Option Menu from the Waypoint Review Page and press In.To send a location:1. Press the Thumb Stick In and hold it until the Shortcuts Menu is displayed.2. Highlight Find ‘N’ Go and press the Thumb Stick In.3. Highlight the desired category and press the Thumb Stick In. ( For the Contacts List, select the desired contact and press the Thumb Stick In.)4. Depending on which category you select, highlight the desired item and press the Thumb Stick In to display the Information page for that item.5. From the Information Page, highlight the Option Menu in the upper right and press the Thumb Stick In.6. Highlight Send Location and press In again. The unit now sends the point to the other Rino users on your channel/squelch code. If using the Scramble feature, receiving radios must also have Scramble enabled.Rino520_530_prelim.indd 23 1/25/2005 5:00:38 PM

24 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > MAP PAGEMap PageThe Map Page displays your present position and direction of movement using a triangular Position Icon that is centered on the map. As you travel the map display leaves a “trail” (track log) of your movements.The map displays geographic details such as rivers, lakes, highways, and towns. The map can display a higher level of detail than the basemap provided with the unit (i.e. residential streets, parks, etc.), if Garmin MapSource data has been downloaded to the unit using a CD-ROM mapping program. When using MapSource data, the word “mapsource” displays below the map scale whenever you zoom in to view map details.On the right side of the Map Page, you can choose to show either the Contact Bar, Data Fields, or only the Map. As you highlight the contacts on the Contact Bar, the Map page centers the map on that contact and displays its name, direction, and distance.In many instances the map displays an Accuracy Circle surrounding the Position Icon. The Rino 530 uses both map resolution and GPS accuracy in deﬁning your location to a point within the circle. The smaller the circle, the more accurate your location.When using the Pan Map feature, a small outline arrow (Map Pointer) can be moved about the page to highlight and identify map items or to scroll the map to view areas not shown on the display screen.Four optional Data ﬁelds on the right side of the page can be programmed to provide a variety of travel and navigation information.Accuracy CircleStatus BarOption Menu and Main Page Menu ButtonsPosition IconMap Scale Contact BarRino520_530_prelim.indd 24 1/25/2005 5:00:39 PM

Rino® 530 Owner’s Manual 25PRELIMINARYUNIT OPERATION > MAP PAGETo view a Contact from the Map Page:1. Highlight the Contact icon using the Thumb Stick. As you highlight the contacts on the Contact Bar, the Map page centers the map on that contact and displays its name, direction, and distance near the top of the screen.2. Press the Thumb Stick In to view the details of the Contact.3. Press the Thumb Stick to the Left or Right to re-center the map on your current position.The scale can be changed from 20 feet to 500 miles. A lower zoom scale displays less area but more map detail, while a higher zoom scale shows you a larger area with less map detail. The Thumb Stick and Z (Zoom) button on the front right of the unit allow you to zoom in and out on the map. Press the Z (Zoom) button from any page (other than the Map Page) to open the Map Page. To change scales on the Map Page:1. Press the Z (Zoom) button to open the Zoom window.2. Use the Thumb Stick and Z (Zoom) button to change the map scale in order to show more map area with less detail or less map area with more detail. Press and hold Up or Down on the Thumb Stick to zoom the map scale rapidly. Press the Thumb Stick In or to any direction to close the Zoom window. The map scale in the lower left hand side of the display is shown in units of measurement selected in the Units ﬁeld of the Unit Setup Page (accessed through the Main Menu Setup Page). If you zoom in so far that the resolution of the map data is exceeded and the appearance of the map is no longer accurate, the word, “overzoom” displays just below the map scale. Press Up to Zoom Out; press Down to Zoom InRino520_530_prelim.indd 25 1/25/2005 5:00:40 PM

26 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > MAP PAGEMap Page OptionsMap Page options allow a variety of operating and custom features for your Rino 530. The Map Page options are: Highlight an option then press the Thumb Stick In to select.Map Page Option Menu Pan Map—Allows you to move the Panning Arrow (Map Pointer) about on the map. Refer to the “Using the Pan Map Option” section for complete instructions.Stop Navigation—Quits navigation of a Goto, Route or Track in progress. When you are not navigating to a destination, the Stop Navigation option is “grayed out” and is non-functional.Show...—Allows you to choose to show either the Contact Bar, four programmable Data Fields or show the Map Only. Choosing either Contact Bar or Data Fields reduces the map area.Setup Map—Displays the Setup Map Pages, which allow you to tailor the map to your requirements such as changing text size, map orientation, and map detail. Refer to the “Setting up the Map” section for complete instructions.Measure Distance—Displays the distance from one point on the map to another.Restore Defaults—Returns the Map Page to the original factory settings (defaults).Rino520_530_prelim.indd 26 1/25/2005 5:00:41 PM

Rino® 530 Owner’s Manual 27PRELIMINARYUNIT OPERATION > MAP PAGEUsing the Pan Map OptionThe Map Page pan function allows you to display an arrow used to point at and identify items on the map, and to move the map in order to view areas beyond the current viewing area on the display.The map panning function is activated from the Option Menu on the Map Page. Use the Thumb Stick to move the panning arrow (also referred to as the map pointer) in the desired direction. If the arrow moves to the edge of the map display, the map also moves to reveal more area and a busy hourglass appears by the cursor while the data is drawn on the screen. Whenever you place the panning arrow on a map item, the name of that item is highlighted. This feature applies to waypoints, roads, lakes, rivers; nearly everything that is displayed.Press the Thumb Stick In to mark the arrow location or display the map item information page. The Option Menu allows you to: send the location of that item, project a waypoint from it, save it as a waypoint, set a proximity circle around it, add it to a route, or view the Sun & Moon phase or view Hunt & Fish information from it. On-screen buttons at the bottom of the page allow you to Goto the map item, display it on the map or to select OK and return to the Map Page. Press the Page button to stop panning the map.To ﬁnd an item near the map pointer:1. When using the panning arrow, press and hold the Thumb Stick In to display the Shortcuts Menu. 2. Select Find ‘N Go to display items. Select the category you wish to search (waypoints, contacts, etc.), then select Near Map Pointer from the pop-up list. The Rino 530 then searches for the items nearest the location of the map pointer instead of your actual location.Map Page with Panning ArrowRino520_530_prelim.indd 27 1/25/2005 5:00:41 PM

28 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > MAP PAGEProgramming the Data FieldsSelect Show... Data Fields to view four optional Data Fields on the right side of the screen that can be programmed to provide a variety of travel and navigation information. A list of the choices is shown to the right. Not all data types are available on every page.To program a data ﬁeld:1. Use the Thumb Stick to highlight the data ﬁeld and then press In to display the list of data options.2. Highlight the desired option and then press the Thumb Stick In to change the data ﬁeld type.Changing Data FieldsData Field OptionsThee data ﬁeld options apply to the Map Page data ﬁelds and the Trip Computer data ﬁelds. For deﬁnitions of these all data ﬁelds used in the Rino 530, refer to the “Appendix.” Bearing Course Current DestinationCurrent Distance Current ETA Current ETEElevation Final Destination Final DistanceFinal ETA Final ETE GPS AccuracyHeading Max Speed Moving Avg. SpeedOdometer Off Course Overall Avg. SpeedPointer Speed SunriseSunset Time of Day To CourseTrip Odometer Trip Time—Movg. Trip Time—StoppedTrip Time—Total Turn Velocity Made GoodVertical Speed Trip Computer Only Location (lat/lon)Location (selected)Rino520_530_prelim.indd 28 1/25/2005 5:00:42 PM

Rino® 530 Owner’s Manual 29PRELIMINARYUNIT OPERATION > MAP PAGESetting up the MapThe Setup Map option displays the ﬁve Map Setup Pages, each accessed by an on-screen button.General SetupSub-Page ButtonsLines SetupPoints SetupText SetupMap Data SetupSetup ItemsOptionsTo use Map Setup options:1. Select Setup Map from the Option Menu and then press the Thumb Stick In to display the Map Setup Page. 2. Press Up or Down on the Thumb Stick to highlight the desired sub-page button, which displays the options list for that sub-page to the left. 3. Press Left, then Up or Down on the Thumb Stick to highlight an item on the list. Press Right to return to the sub-page buttons.5. Use the Thumb Stick to highlight the desired option and then press it In to activate.6. Press the Page button or the on-screen X button to return to the Map Page.Rino520_530_prelim.indd 29 1/25/2005 5:00:42 PM

30 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > MAP PAGEGeneral SetupOrientation—Track Up or North Up; ﬁxes the top of the map display to the current track heading or to a north heading.Auto Zoom—On or Off; automatically scales the map to display both your current location and the next point to which you are navigating.Detail—Most, More, Normal, Less, or Least; controls how much map detail you see. This setting only applies to a map feature set to Auto. Those features which have a speciﬁed scale or are turned Off are unaffected by this setting.Lock on Road—On or Off; available only if MapSource Data is loaded; when On the triangle icon locks to the road that you are traveling.Display Mode—Land or Water.Tracks SetupSaved Tracks and Track Log—Scale options; Off, Auto, or 20 ft–500 miles, sets the maximum scale at which the feature should appear on the screen. Some types of data display only at certain zoom scales.Goto Line—Bearing or Course.Track Points—Select the number of track points per track. Up to 10,000 active Track Points allowedMap Features SetupPoints of Interest, Waypoints, Street Label, and Land Cover—Off, Auto, or 20 ft–500 miles, sets the maximum scale at which that feature should appear on the screen. Some types of data display only at certain zoom scales. Rino520_530_prelim.indd 30 1/25/2005 5:00:42 PM

Rino® 530 Owner’s Manual 31PRELIMINARYUNIT OPERATION > MAP PAGEText SetupPoints of Interest, Waypoints, Street Label, and Land Cover—None, Small, Medium, or Large; control the screen size of the name. Map Data SetupShow—Check box; check mark determines if map data is used or not. Option Menu allows you to choose to show all, show none, or show speciﬁc MapSource Data. See also the “Appendix.”Measuring DistanceTo use the Measure Distance option:1. Select Measure Distance from the Option Menu and then press the Thumb Stick In to display the Panning Arrow. Ref displays under the arrow.2. Use the Thumb Stick to move about on the Map Page until you reach the point to which you want to measure. A new Map Pointer ﬁeld displays showing the location of the pointer and the direction and distance from where you began the measuring.3. To begin measuring from a different point, press the Thumb Stick In at the desired location.4. To stop measuring, press the Page button.Measuring distanceMap Pointer FieldRino520_530_prelim.indd 31 1/25/2005 5:00:43 PM

32 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > NAVIGATION PAGENavigation PageThe Navigation Page provides active guidance with a rotating compass ring that shows your course (track) while you are moving and a bearing pointer to indicate the current direction to your destination (bearing) relative to the course. The Data Field at the top of the page, by default shows you the name of your destination. All ﬁve Data Fields can be programmed to display a variety of navigation data. The list of data ﬁeld choices may be found on page 28 and deﬁnitions may be found in the “Appendix.”The Compass Ring functions as a magnetic compass when you are stationary. When you are moving, the heading is controlled by the GPS receiver (based upon settings customized in the Heading Setup Page). Times to DestinationStraight Line Distance to DestinationSelectable Data FieldsBearing PointerCompass RingDestination Name (Waypoint) NOTE: The Compass should be calibrated for the greatest accuracy. Refer to page 36 for information on calibrating the compass.Using the Navigation PageThe two main components of the Navigation page are the Bearing Pointer and Compass Ring. The Bearing Pointer always points directly to the destination, no matter what your current location might be. The Compass Ring displays your heading.Rino520_530_prelim.indd 32 1/25/2005 5:00:44 PM

Rino® 530 Owner’s Manual 33PRELIMINARYUNIT OPERATION > NAVIGATION PAGEWhile you are navigating a route, the pointer indicates the direction (a bent arrow) of the turn to the next point in the route as well as the direction to the current point when you get within 15 seconds Estimated Time of Arrival of the current point. For example, if the arrow is pointing straight up, you are going directly to your destination. If it points any direction other than up, turn and move towards the direction the arrow is pointing until it points up, and then continue in that direction. If you are using the Course Pointer option instead and you drift away from the original line of travel to your destination, the Course Deviation Indicator (CDI) provides graphic indication of drift (right or left) and displays the distance off course. When you are not on an active Goto, Track, or Route (in other words, not traveling to a recorded destination), the window at the top of the page is blank when Destination is selected. The Compass Ring displays your heading while you are moving, but the data ﬁelds to the right of the page will not display any destination related data, such as Estimated Time of Arrival. Navigation Page with Course Pointer and Course Deviation Indicator (CDI) Scale active.CDI ScaleTo stop navigating:1. Highlight the on-screen Option Menu button at the top of the Navigation or Map Page and press the Thumb Stick.2. Select Stop Navigation, then press the Thumb Stick.Rino520_530_prelim.indd 33 1/25/2005 5:00:44 PM

34 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > NAVIGATION PAGENavigation Page OptionsSight ‘N Go—Use the Sight ‘N Go feature to locate a landmark visually and then lock in a magnetic heading to it.Stop Navigation—Cancels navigation (“Grayed out” or disabled unless you are navigating on a Goto, Track, or Route.)Bearing Pointer/Course Pointer—Toggles between Bearing (always directed at destination) and Course (distinctive with dots across center of compass, shows amount of correction needed to be back on course.)Show Data Fields/Big Compass—Toggles to display data ﬁelds on the right side of the display or removing the data ﬁelds and showing a larger compass.Calibrate Compass—Calibrates the electronic compass. Follow the on-screen instructions. Restore Defaults—Returns options and data ﬁeld choices to factory designations.Navigation Page Option MenuTo change data ﬁelds:1. Use the Thumb Stick to highlight the desired data ﬁeld and then press it In to display the list of data options.2. Select the desired option from the list and press the Thumb Stick In. The list of data ﬁeld choices may be found on page 28 and deﬁnitions may be found in the “Appendix.”Rino520_530_prelim.indd 34 1/25/2005 5:00:44 PM

Rino® 530 Owner’s Manual 35PRELIMINARYUNIT OPERATION > NAVIGATION PAGEUsing Sight ‘N GoTo use Sight ‘N Go to navigate:1. Use the Page button to access the Navigation Page and then use the Thumb Stick to access the Option Menu .2. Use the Thumb Stick to highlight Sight ‘N Go and press In. Note that the compass ring with pointer is in-line with the two sighting marks on the case. 3. Hold the Rino 530 at eye level and line up the two sighting marks on the case with the distant object. Press the Thumb Stick to Lock Direction.4. To navigate to your destination, select Set Course and press the Thumb Stick. Begin traveling to your destination using the pointer as a guide. To view your destination as a waypoint, select Project Waypoint and press the Thumb Stick. To re-sight the destination, press the Thumb Stick In when Re-Sight is highlighted.Rino 530 held level for Sight ‘N GoSighting MarksCalibrating the CompassThe Electronic Compass must be calibrated outdoors when you ﬁrst use the Rino 530 and after new batteries have been installed. The accuracy of the Electronic Compass is adversely affected if the unit is not held level or is held near items that generate magnetic ﬁelds, such as cars, large belt buckles, etc.Rino520_530_prelim.indd 35 1/25/2005 5:00:45 PM

36 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > NAVIGATION PAGETo calibrate the Electronic Compass:1. Use the Page button to access the Navigation Page.2. Use the Thumb Stick to highlight the Option Menu on-screen button and press In.3. Highlight the Calibrate Compass option and press the Thumb Stick In.4. Press the Thumb Stick to activate the Start button and then follow on-screen directions for holding and turning the unit. Hold the unit level when calibrating the compass. Calibrating the compass: Hold the unit level and face up. Turn the unit around as shown above. The unit displays a “Just Right,” “Too Fast,” or “Too Slow” message for you to adjust your turning speed as needed. The “Calibration Successful” message displays when ﬁnished. If a “Calibration Failed” message displays, repeat the process.When you manually turn the Compass Off, it stays off until you manually turn it On again. Sometimes, however, when you turn the Compass On, the Rino 530 overrides the Compass and uses the GPS receiver to track your heading. The criteria for switching between the Compass and the GPS is customized on the Heading Setup Page (see section “Heading Setup Page”). To turn the compass on and off:• Press and hold the Zoom (Z) button. A message appears on the screen indicating that the compass has been turned on or off.• Press the Page button to access the Main Menu. Select Setup and then System. Turn the compass on and off through the System Setup Page (see section “System Setup Page”).Rino520_530_prelim.indd 36 1/25/2005 5:00:46 PM

Rino® 530 Owner’s Manual 37PRELIMINARYUNIT OPERATION > ALTIMETER PAGEAltimeter PageThe Altimeter Page provides the current elevation, rate of ascent/descent, a proﬁle of elevation changes over distance or time, or a proﬁle of pressure changes over time. The Altimeter Page’s Option Menu allows you to select from a variety of display options such as plotting over time, plotting over distance, displaying the zoom ranges of measurement, viewing elevation or pressure points, and resetting data displays. Two user selectable data ﬁelds allow you to display a variety of current and recorded pressure and elevation related data. NOTE: The Altimeter should be calibrated for the greatest accuracy. Refer to page 41 for information on calibrating the Altimeter.Status Window is located at the top of the page and displays the current elevation and your current rate of ascent or descent when moving. It can also display the ambient pressure.Proﬁle Field is located in the center of the page and can be conﬁgured to display either elevation or ambient pressure plots as selected from the Altimeter Page Option Menu .Data Fields at the bottom of the page are user selectable and display a variety of recorded or current data.Data FieldsStatus WindowProﬁle FieldRino520_530_prelim.indd 37 1/25/2005 5:00:46 PM

38 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > ALTIMETER PAGEAltimeter Page OptionsThe Altimeter Page Option Menu allows you to select the type of information and how it is to be displayed. Altimeter Page Options include: Plot Over Time/Distance—Plots the changes in elevation or pressure over a length of time or over a distance. When Plot Over Distance is selected, Plot over Time is displayed in the Option Menu (and vice versa). View Pressure/Elevation Plot—Displays a record of changes in barometric pressure or elevation for a set period of time. Zoom Ranges—Sets the zoom range for elevation, distance, or time. View Points—Shows the elevation, time of day, and date a speciﬁc point was createdReset…—Clears recorded data from the page to begin recording new data. Calibrate Altimeter—Increases the accuracy of the altimeter. You must know your elevation or pressure to calibrate the altimeter. Restore Defaults—Returns the Altimeter Page to the original factory settings (defaults).Altimeter Page Option MenuRino520_530_prelim.indd 38 1/25/2005 5:00:47 PM

Rino® 530 Owner’s Manual 39PRELIMINARYUNIT OPERATION > ALTIMETER PAGEViewing Pressure/Elevation PlotsWhen selecting the View Elevation Plot option, you can plot a proﬁle of elevation changes that occur as you navigate over a set distance or period of time. When you select View Pressure Plot, you can view a record of changes in barometric pressure for a set period of time. When one option is active the other displays on the Altimeter Page Option Menu . To view elevation or pressure plots:1. Use the Thumb Stick to highlight the desired option from the Option Menu and then press In to display the plot.2. Adjust time and distance measurement as desired using the Elevation Plot Zoom Ranges feature explained below.3. To clear the plot and start a new one, you must clear the Track Log. Adjusting the Zoom RangesYou can set the Zoom Ranges for elevation, distance, or time when you display the View Elevation Plot. You may change the ranges for the vertical distance and the time. Ranges for View Pressure Plot are ﬁxed at 6.8 millibars and 12 hours.To adjust zoom ranges:1. Select the type of plot you want to display and use the Thumb Stick to highlight Zoom Ranges from the Option Menu.2. Press the Thumb Stick In to display the Zoom Ranges Page. 3. Move the Thumb Stick Up or Down to adjust the vertical distance and Left or Right to adjust either the time or distance. Press In to return to the Plot Page.Zoom Range selectionRino520_530_prelim.indd 39 1/25/2005 5:00:47 PM

40 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > ALTIMETER PAGEViewing PointsThe View Points option allows you to scroll through the stored elevation proﬁle and to view a single point along the proﬁle. When the pointer is stopped at a location along the proﬁle, the display shows the elevation, time of day and date the point was created. View Points Option PageTo use the View Points option:1. Use the Thumb Stick to access the Option Menu.2. Highlight the View Points option and press the Thumb Stick In to display the View Points Page.3. Move the Thumb Stick Right or Left to scroll the proﬁle past the pointer in the center of the page. As the proﬁle moves past the pointer, the status window at the top of page changes to display the date, time, and altitude for the point beneath the pointer.Resetting DataYou can reset the elevation data and the maximum elevation data by selecting the Reset option from the Altimeter Page Option Menu . To reset the elevation data and max elevation ﬁelds:1. Use the Thumb Stick to highlight the Reset option from the page Option Menu and press the Thumb Stick In to display the Reset page.2. Use the Thumb Stick to highlight the reset options on the page and then press the Thumb Stick In to place a check mark in the box next to a selected item. 3. Move to the Apply button and press the Thumb Stick In to reset the data ﬁelds.Rino520_530_prelim.indd 40 1/25/2005 5:00:48 PM

Rino® 530 Owner’s Manual 41PRELIMINARYUNIT OPERATION > ALTIMETER PAGECalibrating the AltimeterBecause the Rino 530 relies on the Barometric pressure to determine the elevation and the pressure at any given elevation can ﬂuctuate, you can calibrate the altimeter to increase its accuracy. You must know the elevation or pressure at your current location, information you can obtain from a map or other reliable source. To manually calibrate the altimeter:1. Use the Thumb Stick to access the Option Menu.2. Highlight the Calibrate Altimeter option and press the Thumb Stick to display the Calibration Page.3. At the message asking “Do You Know The Correct Elevation?” highlight the on-screen Yes button and press the Thumb Stick In to enter your elevation. When ﬁnished, highlight OK and press it In to return to the Altimeter Page.Or At the message asking “Do You Know The Correct Pressure?” highlight the on-screen Yes button and press the Thumb Stick In to enter your elevation. When ﬁnished, highlight OK and press it In to return to the Altimeter Page.Programming Data FieldsThe two user-selectable data ﬁelds support this page and can be programmed to display the data options listed to the right.To program a data ﬁeld:1. Use the Thumb Stick to highlight the desired data ﬁeld and then press it In to open the data ﬁeld option pop-up window. 2. Use the Thumb Stick to move Up or Down the menu to highlight a desired data option and then press In to place it in the data ﬁeld.Rino520_530_prelim.indd 41 1/25/2005 5:00:48 PM

42 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > TRIP COMPUTER PAGETrip Computer PageThe Trip Computer Page by default displays up to seven different types of navigation data. Choosing Big Numbers will display 2 large data ﬁelds. Trip Computer Page, Small NumbersTrip Computer Page, Big NumbersEach data ﬁeld is selectable and can contain one of many data information options. The default settings for these ﬁelds are shown in the illustration. The list of data ﬁeld choices may be found on page 28 and deﬁnitions may be found in the “Appendix.” When the data ﬁeld title is selected, press the Thumb Stick In to select a new data ﬁeld choice. By selecting the information options that you prefer and arranging them in a desired order on the page, you can customize the Trip Computer Page to meet your navigation needs. Trip Computer Page OptionsThe Option Menu allows you to reset the Trip Computer data when you are ready to start a new trip, choose between Big or Small Numbers, and Restore Defaults.Reset—Clears recorded data from the page to begin recording new data. Big/Small Numbers—Changes the display from seven small data ﬁelds to two large data ﬁelds. Restore Defaults—Returns the Trip Computer Page to the original factory settings (defaults).Selecting a data ﬁeld Rino520_530_prelim.indd 42 1/25/2005 5:00:49 PM

Rino® 530 Owner’s Manual 43PRELIMINARYUNIT OPERATION > MAIN MENU PAGEMain Menu PageThe Main Menu provides access to additional Rino 530 feature pages. The pages listed below provide enhancements to Rino 530 operation. Press the Page button repeatedly to cycle to the Main Menu or select it from the Main Page Menu at the top of each main page.Main Menu PageUsing the Main MenuThe Main Menu allows access to many features and pages in the Rino 530. Please refer to the “Features” section for a complete description of the items accessed through the Main Menu. Mark Waypoint Page—Allows you to mark and store a waypoint for your current location or a map pointer location.Find ‘N Go Menu—Allows you to locate and Goto Waypoints, Favorite Locations, Cities, Interstate Exits, Points of Interest, Addresses, and Intersections. (Some require MapSource data.) Routes Page—Allows you to create and store routes for repeated use.Tracks Page—Provides access to the track log, saved tracks, and contact tracks.Proximity Page—Allows you to set a proximity alert distance around contacts or waypoints.Satellite Page—Provides a picture of the satellite signal tracking and tells you when the unit is ready to navigate.Rino520_530_prelim.indd 43 1/25/2005 5:00:50 PM

44 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > MAIN MENU PAGESetup Page—Allows tailoring of items such as time format, units of measure, display backlighting timeout and contrast adjustment, heading selection, interface setups, and system software information.Calendar Page—Provides you with a monthly calendar with programmable reference notes. Alarm Clock—Provides a settable 24-hour alarm clock.Calculator—Provides a calculator feature available in two forms: Standard or Scientiﬁc.Stopwatch Page—Allows you to use the unit as a stopwatch, including a lap timer.Sun & Moon Page—Shows a graphic display of both the Sun & Moon locations at various times, dates, and locations.Hunt & Fish Page—Provides you with a listing of best times for hunting and ﬁshing for a chosen location.Area Calculation Page—Use this function to calculate area as you move around. Games Page—Games are provided as an entertainment feature.Many of the items in the Main Menu Page are discussed in-depth in the “Features” section. Refer to the speciﬁc section for more information.Rino520_530_prelim.indd 44 1/25/2005 5:00:50 PM

Rino® 530 Owner’s Manual 45PRELIMINARYUNIT OPERATION > MAIN MENU PAGEMain Menu OptionsThrough the Main Menu you can establish the sequence of pages. Page Sequence SetupYou may add, remove, or reorder any of the Main Pages, plus additional pages. The default Main pages are Radio, Map, Navigation, Altimeter, Trip Computer, and Main Menu. The Main Menu cannot be removed from the page sequence. If a page is added to the Main Page Sequence, it does not appear in the Main Menu.To move, insert or remove a Main Page:1. From the Main Menu, highlight the Option Menu on-screen button and press the Thumb Stick In. Highlight Page Sequence Setup and press In.2. To move a page in the page sequence, highlight the page and press In. Select Move then move the Menu item Up or Down using the Thumb Stick. When the desired position is displayed and press the Thumb Stick In.3. To insert a new page, highlight the page you wish to insert it before and press In. Select Insert, then choose a page from the list and press the Thumb Stick In. To remove a page in the order, highlight the page and press In. Select Remove and press the Thumb Stick In.Inserting a new page in the Page SequenceRino520_530_prelim.indd 45 1/25/2005 5:00:50 PM

46 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > SHORTCUTS MENUShortcuts MenuThe Shortcuts Menu is accessed by pressing the Thumb Stick In until the menu pops up on the middle of the display. The Shortcuts Menu can be accessed from most pages.Shortcuts MenuMark Waypoint—Marks your current location as a waypoint. Opens the Mark Waypoint page that allows you to customize the waypoint information as well as Goto or show on the Map.Find ‘N Go—Opens the Find ‘N Go Page. From the Find ‘N Go page, you can ﬁnd waypoints, contacts, cities, and exits. You may also ﬁnd Points of Interest, addresses, and intersections if a MapSource product is loaded into the Rino 530.Weather Radio—Toggles between the Weather Radio and the FRS/GMRS Radio.Send Note—Sends a note to other Rino 530 users.Enable Keylock—Enables keylock so buttons are not inadvertently pushed. Press and hold the Page button to unlock the buttons.Rino520_530_prelim.indd 46 1/25/2005 5:00:51 PM

Rino® 530 Owner’s Manual 47PRELIMINARYUNIT OPERATION > WAYPOINTSWaypointsThere are numerous ways to create, edit, and use waypoints. Using the Mark Waypoint Page and the Find ‘N Go Menu are two common pages for creating and editing waypoint. You can also create a waypoint using the Map Page. The Rino 530 holds up to 500 waypoints.Mark Waypoint PageThe Mark Waypoint Page allows you to mark and record your current location as a waypoint and appears with a graphic name block (man with a ﬂag) that displays the assigned number for that waypoint and a waypoint symbol.Mark Waypoint PageSymbolWaypoint NameWaypoint DetailsTo mark your current location and open the Mark Waypoint Page:1. Press and hold the Thumb Stick In until the Shortcuts Menu opens. 2. Highlight Mark Waypoint and press the Thumb Stick In. The Mark Waypoint Page opens. You can also access this page by highlighting Mark on the Main Menu Page and pressing the Thumb Stick In. 3. To save the waypoint, highlight OK and press the Thumb Stick In. If you do not want to save it as a new waypoint, press the Page button to cancel.To change Mark Waypoint Page Options:• To change the name of the waypoint, use the Thumb Stick to highlight the waypoint name ﬁeld. • To assign an identifying symbol to a waypoint, use the Thumb Stick to highlight the symbol block just above the waypoint name. • To view the waypoint details, highlight the details ﬁeld and press Left or Right on the Thumb Stick to change to the next data ﬁeld.Rino520_530_prelim.indd 47 1/25/2005 5:00:51 PM

48 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > WAYPOINTSCreating WaypointsTo create a waypoint for a map feature:1. With the Pan Map feature active, move the panning arrow (map pointer) to the map item you want and highlight it.2. Press In and release the Thumb Stick to display the item information page.3. With the Information Page displayed, highlight the Option Menu button at the top of the page and then press the Thumb Stick to open the menu.4. Highlight Save As Waypoint and press the Thumb Stick to save the item as a waypoint.Saving a map feature as a waypointTo create a waypoint using the panning arrow:1. With the Pan Map feature active, move the panning arrow (map pointer) on the map to the location you want to mark, then press the Thumb Stick.2. The Mark Waypoint Page displays, automatically assigning a number to the waypoint.To create a waypoint by manually entering its coordinates (lat/lon):1. Press In and hold the Thumb Stick to access the Shortcuts Menu. Highlight Mark Waypoint and press In. You can also use the Find ‘N Go to view a previous waypoint.2. Highlight the details ﬁeld and press Left or Right on the Thumb Stick to change to the Location ﬁeld. Press In and enter the new coordinates using the on-screen numerical keyboard. Highlight and press OK when ﬁnished.3. You may also change the waypoint name and/or symbol or add notes.Rino520_530_prelim.indd 48 1/25/2005 5:00:51 PM

Rino® 530 Owner’s Manual 49PRELIMINARYUNIT OPERATION > WAYPOINTSProjecting a WaypointProjecting a waypoint from any map item (another waypoint, etc.) allows you to establish a new waypoint on a bearing and distance projected from that map item.To project a waypoint:1. Select a map item from the Find ‘N Go Menu. 2. Highlight the Option Menu on-screen button at the top of the Information Page and press the Thumb Stick In to display the options. Highlight Project Waypoint and press In.3. Highlight either the bearing or distance ﬁeld, then press the Thumb Stick In to display the numerical keyboard. Enter the new bearing or distance, then highlight OK and press In to ﬁnish.Project Waypoint PageEditing a WaypointA waypoint or contact can be edited to add notes or change the map symbol, name, coordinates, or elevation. You can also delete a waypoint or contact.To edit a waypoint:1. Use the Find ‘N Go Menu to display the waypoint/contact or highlight it on the Map Page and press the Thumb Stick In.2. To make changes to the waypoint map symbol, name, location coordinates, elevation ﬁelds and notes, highlight the desired ﬁeld and press the Thumb Stick In to display the keyboard. (For Notes, highlight Edit and press In to start entering data, up to 30 characters.) Select OK and press the Thumb Stick In to ﬁnish.3. Highlight the OK button the press the Thumb Stick to save the changes.Rino520_530_prelim.indd 49 1/25/2005 5:00:52 PM

50 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > WAYPOINTSTo delete a waypoint or contact:1. Use the Find ‘N Go feature to display the point.2. Highlight the Delete button and then press the Thumb Stick In. Conﬁrm the deletion.Deleting a waypointTo move a waypoint by dragging it:1. Use the Find ‘N Go Menu to display the Waypoint Page for the waypoint you want to move.2. Highlight and press the Map on-screen button to display the waypoint on the map.3. With the waypoint highlighted by the panning arrow, press In and release the Thumb Stick. The word “Move” displays beneath the panning arrow.4. Use the panning arrow to drag the waypoint to the new location and then press the Thumb Stick In to place it. Press the Page button before pressing the Thumb Stick to cancel moving the waypoint and return to the Main Pages.To save Map or Find ‘N Go items as waypoints:1. Access the Information Page for the desired item (highlighted from the map or selected from the Find ‘N Go Menu).2. Open the Option Menu at the top of the page, select Save As Waypoint.3. Press the Thumb Stick In to save the item to the Waypoints List.4. Highlight Save As Waypoint and press the Thumb Stick In.Rino520_530_prelim.indd 50 1/25/2005 5:00:52 PM

Rino® 530 Owner’s Manual 51PRELIMINARYUNIT OPERATION > FIND 'N GOFind ‘N GoThe Find ‘N Go Menu allows you to ﬁnd stored locations (waypoints) and map items (cities, exits, etc.). They can be found by name or by those nearest to your current location. If you are using certain MapSource data, the list of ﬁnd locations is expanded to include categories for Points of Interest, Street Addresses, and Intersections. If you would like to use an option that is grayed out (disabled), you need to load map detail using MapSource. To access the Find ‘N Go Menu:1. Press and hold the Thumb Stick In to access the Shortcuts Menu. 2. Highlight Find ‘N Go and press In.Or1. Press the Page button or the on-screen Main Page Menu button to display the Main Menu.2. Highlight the Find ‘N Go icon and press the Thumb Stick In.Find ‘N Go MenuCategories are listed in two different ways: By Name and Nearest. The By Name list contains every item in the map database for the selected category, while the Nearest list contains only those items that are near to your Current Location or the Map Pointer.These pages are structured with a set of sub-menus and location information pages that guide you through the process of ﬁnding locations.Rino520_530_prelim.indd 51 1/25/2005 5:00:53 PM

52 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > FIND 'N GOFinding a WaypointWaypoints that you have created and stored in the Rino 530 can be found by selecting the Waypoint option from the Find ‘N Go Menu. You can ﬁnd a waypoint from the list of waypoints using the By Name or Nearest options as explained on the previous page. When selected from the list, the waypoint displays on the Waypoint Information Page.The Waypoint Information Page displays the waypoint name or number, a map symbol, the location in lat/lon, elevation, distance, bearing, and three on-screen buttons for Goto, Map, and OK functions.Nearest Waypoints selected in Find N’ Go MenuTo ﬁnd a waypoint by nearest:1. Use the Thumb Stick to select Waypoint from the Find ‘N Go Menu. Press the Thumb Stick In to select Nearest from the pop-up menu. Press the Thumb Stick In to display the Waypoints List.2. Use the Thumb Stick to select the desired waypoint from the list and then press the Thumb Stick In to display the Information Page for that waypoint. 3. With the Information Page displayed, select Goto to create a direct line of travel to the waypoint. Select Map to view the waypoint location on the map or select Delete to delete the waypoint.4. Press the Option Menu button to access additional features. You can select: Send Location (to other Rino users), Project Waypoint, Set Proximity (alarm), Add to Route, View Sun & Moon (reports for that waypoint), View Hunt & Fish (reports for that waypoint), or Reposition Here. Rino520_530_prelim.indd 52 1/25/2005 5:00:53 PM

Rino® 530 Owner’s Manual 53PRELIMINARYUNIT OPERATION > FIND 'N GOTo ﬁnd a waypoint by name:1. Use the Thumb Stick to select Waypoint from the Find ‘N Go Menu. Press the Thumb Stick In to select By Name from the pop-up menu. Press the Thumb Stick In to display the Waypoints List.Find ‘N Go Menu2. Use the Thumb Stick to enter the name of the waypoint that you would like to ﬁnd. Entering a waypoint name to ﬁnd By Name3. Select OK when you are ﬁnished entering the name. The waypoint list opens with the name closest to the name you entered on the top. 4. Select the desired waypoint from the list and then press the Thumb Stick In to display the Information Page for that waypoint. 5. With the Information Page displayed, select Goto to create a direct line of travel to the waypoint. Select Map to view the waypoint location on the map or select Delete to delete the waypoint.6. Press the Option Menu button to access additional features. You can select: Send Location (to other Rino users), Project Waypoint, Set Proximity (alarm), Add to Route, View Sun & Moon (reports for that waypoint), View Hunt & Fish (reports for that waypoint), or Reposition Here. Rino520_530_prelim.indd 53 1/25/2005 5:00:54 PM

54 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > FIND 'N GOFinding a ContactContacts that you have received in the Rino 530 can be found by selecting the ‘Contacts’ option from the Find ‘N Go Menu.Contact ListTo ﬁnd a contact:1. From the Find ‘N Go Menu, highlight Contacts and press the Thumb Stick In.2. From the Contacts List, select the desired contact and press the Thumb Stick In.3. With the Contact Information Page displayed, select Goto to create a direct line of travel to the contact. Select Map to view the contact’s location on the map or select Delete to delete the contact. If the contact did not have a GPS location on the last transmission, a question (?) mark appears below the ﬂag. To view the contact details, highlight the details ﬁeld and press Left or Right on the Thumb Stick to change to the next data ﬁeld.Contact Information Page4. Press the Option Menu button to access additional features. You can select: Poll location, Send Location (to other Rino users), View Track, Project Waypoint, Save as a waypoint, or Set Proximity (alarm).Rino520_530_prelim.indd 54 1/25/2005 5:00:54 PM

Rino® 530 Owner’s Manual 55PRELIMINARYUNIT OPERATION > FIND 'N GOFinding a CityCities can be found by selecting the Cities option of the Find ‘N Go Menu, selecting the city from the list of Nearest or By Name, and then displaying the City Information Page.The City Information for the selected city displays, including the city name, the size by population, and distance from your location. You can view it on the map, or create a Goto direct route to the city from your current location or from a location deﬁned by the Panning Arrow (Map Pointer). You can also save the city as a waypoint or add it to an existing route. To ﬁnd a city:1. Use the Thumb Stick to select the Cities option, then press it In to display the ﬁnd Nearest or ﬁnd By Name prompt. Selecting By Name displays the keyboard as an alternative scrolling through the list of nearest cities. If you are currently panning the map, the option Near Map Pointer appears in place of the Nearest option.2. If using ﬁnd By Name, begin spelling the name of the city by using the keyboard. When you have entered enough characters to deﬁne the name, a match list displays. If you are using ﬁnd By Nearest or Near Map Pointer scroll through the list to ﬁnd the city you want. Use the Thumb Stick to select the desired city from the list and then press it In to display the Information Page for that city. 3. With the Information Page displayed, you can select Goto, Map, or OK options.4. Press the Option Menu button to access additional features. You can select: Send Location (to other Rino users), Project Waypoint, Save as a Waypoint, Set Proximity (alarm), Add to Route, View Sun & Moon (reports for that waypoint), or View Hunt & Fish (reports for that waypoint). Find Nearest Cities ListRino520_530_prelim.indd 55 1/25/2005 5:00:55 PM

56 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > FIND 'N GOFinding an ExitYou can use the Find Exit option to locate a nearby exit on an interstate highway. Exits are listed only by Nearest. Exit information pages provide a variety of information about services near each exit, such as rest stops, lodging, restaurants, and service stations. Some services such as service stations on this page can be selected and a separate information page displays with speciﬁc information concerning what types of fuel, mechanical, and food services are available.To ﬁnd an exit:1. Use the Thumb Stick to highlight Exits and then press it In to display the Exit List. 2. Highlight and select an exit type by pressing the Thumb Stick In.3. A list of exits nearest to you displays. The title box indicates the interstate highway that is served by the exits. Two ﬁelds at the bottom of the page indicate distance and bearing to the exit. Scroll through the list to highlight the desired exit.4. Press the Thumb Stick In to display the Information Page for that exit. This page contains the exit description with a list of available services near that exit along with the distance and bearing ﬁelds.5. Use the Thumb Stick to move to the list of services and highlight a selection from the list. 6. Press the Thumb Stick In to display the Information Page for the selected service. The Exit Services Information Page displays the name of the service, its direction from the exit, and a list of the services available, each marked by a check. At the bottom of these Information Pages are on-screen buttons for Goto, Map, and OK.7. Press the Option Menu button to access additional features. You can select: Send Location (to other Rino users), Project Waypoint, Save as a Waypoint, Set Proximity (alarm), Add to Route, View Sun & Moon (reports for that waypoint), or View Hunt & Fish (reports for that waypoint).Rino520_530_prelim.indd 56 1/25/2005 5:00:55 PM

Rino® 530 Owner’s Manual 57PRELIMINARYUNIT OPERATION > FIND 'N GOFinding a Point of InterestYou can use the Find Points of Interest option to locate a nearby restaurant, lodging, landmark, public building, park, etc. However, you must have transferred a MapSource MetroGuide map to the unit map database. Otherwise, this option, plus Address and Intersection options, are grayed out and are not functional. Here is a list of Point of Interest categories:• Food & Drink • Services• Lodging • Transportation• Attractions • Emergency & Govt.• Entertainment • Manmade Places• ShoppingIn many instances, these categories are subdivided into types, such as in the instance of Food & Drink. When you select Food & Drink from the list of categories, you are then presented with a list of types that includes All Types and cuisine options such as American, Asian, Barbecue, Chinese, and many more.Food & Drink typesOnce you have selected an item, you can display the Information Page for that item. You can then use the on-screen buttons to Goto or view the location on the Map; or use the Option Menu for more choices.Rino520_530_prelim.indd 57 1/25/2005 5:00:56 PM

58 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > FIND 'N GOTo ﬁnd a point of interest:1. Use the Thumb Stick to highlight Points of Interest and then press it In to display the Points of Interest Categories List. 2. Use the Thumb Stick to select the desired category and then press it In to display the Types List.3. Use the Thumb Stick to select the desired type and then press it In to display the list for that type.4. Use the Option Menu at the top of page to select from either By Name or Nearest options. Selecting By Name displays a keyboard allowing you to enter the characters of the name you want. A list of matches displays when enough characters are entered.5. Use the Thumb Stick to highlight your selection from the list and then press it In to display the Information Page for that item.Nearest Food & Drink6. Use the on-screen buttons to Goto or view on the Map, or use the page Option Menu.7. Press the Option Menu button to access additional features. You can select: Send Location (to other Rino users), Project Waypoint, Save as a Waypoint, Set Proximity (alarm), Add to Route, View Sun & Moon (reports for that waypoint), or View Hunt & Fish (reports for that waypoint). Rino520_530_prelim.indd 58 1/25/2005 5:00:56 PM

Rino® 530 Owner’s Manual 59PRELIMINARYUNIT OPERATION > FIND 'N GOFinding an Address or IntersectionYou can enter a street number, choose a street name from a list and ﬁnd an address within the area of map data coverage or enter two street names and locate the intersection. To use these options, however, you must be using a MapSource product that provides this type of map data. To locate an address:1. Use the Thumb Stick to highlight Address and press it In to display the Find Address page. 2. Highlight the Number ﬁeld and use the keyboard for entering numbers.Entering an Address3. Move to the Street ﬁeld using the Thumb Stick. 4. Press the Thumb Stick In to display the Select Street Name list. Find the street by using the keyboard to enter characters until a list appears.5. With the desired street highlighted, press the Thumb Stick In to place the street name on the Find Address page. Repeat this process for city and postal codes, if desired. A window at the bottom of the page displays a list of matches and the quality of each match. You may also use the Option Menu to Clear City, Clear Postal Code or Clear All.6. Use the on-screen buttons at the bottom of the page to Goto, view the item on the Map, OK to close, or use the Option Menu for other choices.Rino520_530_prelim.indd 59 1/25/2005 5:00:57 PM

60 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > FIND 'N GOTo locate an intersection:1. Display the Find ‘N Go Menu and use the Thumb Stick to highlight the Intersection category and press it In to display the Find Intersection page. 2. Highlight the ﬁrst Street ﬁeld and then press the Thumb Stick In to display the Street list.3. Enter the name of the street in the name ﬁeld at the top of the list using the keyboard data entry method discussed in the Quick Start Guide. Once you have spelled enough of the street name, a list of matches displays, often with several streets on the list. Press the Thumb Stick In to move the highlight to the street list and then scroll up or down until you ﬁnd the street name you want. Press it In to place the name in the ﬁeld.Finding an Intersection4. Highlight the best match and then press the Thumb Stick In to display the Information Page for the intersection. Use the on-screen buttons at the bottom of the page to Goto, view the item on the Map, OK to close, or use the Option Menu for other choices.Rino520_530_prelim.indd 60 1/25/2005 5:00:57 PM

Rino® 530 Owner’s Manual 61PRELIMINARYUNIT OPERATION > FIND 'N GOFinding a Last Found PlaceYou can use the Recently Found Places option to locate Points of Interest, Cities, Waypoints or Contacts and Intersections and other locations you have recently retrieved. The process for ﬁnding recent points from the Find ‘N Go list is the same as ﬁnding a regular waypoint. To ﬁnd a Last Found Place:1. Use the Thumb Stick to select the Last Found Places option from the Find ‘N Go List and then press it In. Last Found Places PageSub-page buttons2. Press Up or Down on the Thumb Stick to highlight the desired sub-page button, which will display the options list for that sub-page (Points of Interest, Cities, Waypoints/Contacts or Intersections) to the left. 3. Press Left then Up or Down on the Thumb Stick to highlight an item on the list and press the Thumb Stick In to display the Information Page for that item. Press Right to return to the sub-page buttons.4. With the Information Page displayed, you can select Goto to create a direct line of travel to the item. Select Map to view the waypoint location or select OK. For Waypoints and Contacts, you may also choose to Delete to permanently remove that item.5. Use the page Option Menu to send the location of that point, project a new waypoint from its location, set a proximity circle, add the item to an existing route, or view sun/moon or hunt/ﬁsh position data for this time and date.Rino520_530_prelim.indd 61 1/25/2005 5:00:58 PM

62 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > WEATHER RADIOWeather RadioThe Weather Radio can be turned on and off through the Shortcuts Menu or the Option Menu in the Radio Page. You may also enable Weather Alerts from the Radio Page. Refer to the “Radio Page” section for complete information about the Weather Radio and Weather Alert.To turn the Weather Radio on and off:1. Open the Radio Page by pressing the Page button or using the on-screen Main Page Menu button . 2. Use the Thumb Stick to highlight the Option Menu on-screen button and then press the Thumb Stick In to display the menu.3. When Use Weather Radio is highlighted, press the Thumb Stick In to turn on the Weather Radio. You can select Enable Weather Radio after the Weather Radio is on. 4. To turn the Weather Radio off, press the Thumb Stick In when Use FRS/GMRS Radio is highlighted. This will switch the Rino 530 back over to the FRS/GMRS radio.Radio Page with Weather Radio on NOTE: You can also turn on and off the Weather Radio through the Shorcuts Menu. Press and hold the Thumb Stick In to open the Shortcuts Menu. When the Weather Radio is on, Enable Weather Alert is added at the bottom of the option menu. Press the Thumb Stick In when Enable Weather Alert is highlighted to turn the feature on. You can then turn the Weather Radio off and continue normal FRS/GMRS radio operations. When a Weather Alert is detected, the Rino 530 will break into any FRS/GMRS transmission to automatically turn on the Weather Radio and broadcast that alert. Select Disable Weather Alert to turn off that feature.Rino520_530_prelim.indd 62 1/25/2005 5:00:58 PM

Rino® 530 Owner’s Manual 63PRELIMINARYUNIT OPERATION > SENDING A NOTESending a NoteYou may send a note to other Rino 530 users. When you send a note, it appears along the bottom of the display on every Rino 530 user who is using the same Channel and Squelch Code that you are using. The Send Note feature is great when you are trying to get the group to meet at a certain location or tell everyone in the group something in a silent manner. To send a saved note:1. Press the Thumb Stick In until the Shortcuts Menu appears. 2. Select Send Note and press the Thumb Stick In to open the Send Note Page. 3. Select a note from the Saved Notes list and press the Thumb Stick In. 4. The selected note appears in the Edit Note ﬁeld. Press the Thumb Stick In to edit the Saved Note. Refer to the Quick Start Guide for information on entering data using the on-screen keyboard. When you are done editing the note, push the Thumb Stick In when OK is highlighted on the keyboard. 5. Select Send to send the note to all users. Select Save to save the note. Select Clear to delete the note. To send a new note:1. Press the Thumb Stick In until the Shortcuts Menu appears in the middle of the screen. 2. Select Send Note and press the Thumb Stick In to open the Send Note Page. 3. The Edit Note ﬁeld is highlighted when the page opens. Press the Thumb Stick In to create a note. When you are done editing the note, push the Thumb Stick In when OK is highlighted on the keyboard. 4. Select Send to send the note to all users. Select Save to save the note. Select Clear to delete the note. Send Note PageRino520_530_prelim.indd 63 1/25/2005 5:00:59 PM

64 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > USING A GOTOUsing a GotoThe Goto function allows you to create a direct route to a destination, (waypoint, city, or point of interest). Once you have accessed the Information Page for an item, use the Goto button at the bottom of the page to initiate travel, using the Map and Navigation Pages for guidance.To activate a Goto: 1. Use the Find ‘N Go Menu to access the Information Page for any desired destination and use the Thumb Stick to highlight the Goto button. 2. Press the Thumb Stick In to start navigation. 3. Observe the Navigation Page, it displays the name of your destination, the distance from your current location, and a Bearing Pointer indicating the direction you should travel. The time required to reach your destination displays when you begin to travel and establish a predictable rate of movement. The Data Fields to the right of the page display information relative to your travel. 4. Use the Page button or Main Page Menu to access the Map Page and observe your movements and a dark line indicating the direct path from your current location to your destination. 5. Use the Bearing Pointer on the Navigation Page to maintain travel in the right direction and observe distance and time information to monitor your progress. When you are close to your destination, an “Arriving at Destination” message appears. If you move past the destination the Bearing Pointer reverses and the distance increases. To stop navigation, select the on-screen Option Menu button at the top of the Navigation or Map Page. Select Stop Navigation, then press the Thumb Stick In.Viewing a Goto on the Map PageRino520_530_prelim.indd 64 1/25/2005 5:00:59 PM

Rino® 530 Owner’s Manual 65PRELIMINARYUNIT OPERATION > ROUTES PAGERoutes PageRoute navigation allows you to create a sequence of intermediate waypoints that leads you to your ﬁnal destination. The Rino 530 stores 20 routes, each with up to 50 waypoints. A route can be created and modiﬁed from the Route Page, and waypoints can be added to a route from the Find ‘N Go Menu. More complex routes can be created using a PC and MapSource mapping programs and then transferred to the unit’s memory. Creating and Using a RouteTo create a route:1. Access the Routes page from the Main Menu. The page has a New button, a list of routes, and the number of unused routes. 2. Use the Thumb Stick to highlight the New button and press it In to display the Route Setup Page. Routes List Page3. With an empty row (dashed) in the route list highlighted, press the Thumb Stick In to display the Find ‘N Go Menu.4. Select a route waypoint from one of the Find ‘N Go Menu categories and display the Information Page for the selected waypoint, city, exit, point of interest, etc. Highlight the on-screen Use button and press the Thumb Stick In to place it on the Routes List. 5. To add more waypoints to the route, repeat the process in Steps 3 and 4. The route is named for the ﬁrst and last waypoints on the route.You can add waypoints to the end of an existing route at any time by using the Find ‘N Go Menu.Rino520_530_prelim.indd 65 1/25/2005 5:00:59 PM

66 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > ROUTES PAGETo add a Find ‘N Go Menu item to a route:1. Select an item from the Find ‘N Go Menu and display its Information Page. If a contact is used in a route, the route changes as the contact’s position is updated, or it may be saved as a Waypoint to serve as a stationary point.2. Select the page Option Menu and select Add To Route to display the Routes List.3. Highlight and select the route desired and then press the Thumb Stick In. A “Waypoint Added Successfully” message displays.Editing a RouteTo remove all waypoints:1. From the Route Page, select the on-screen Option Menu button and press the Thumb Stick In to access the Option Menu.2. Highlight the Remove All option and then press the Thumb Stick In to remove all waypoints from the list. When you see the prompt “Do you really want to remove all waypoints from the route?”, select Yes.Route OptionsTo reverse the route:1. From the Route Page, select the on-screen page Option Menu button and press the Thumb Stick In to access the Option Menu.2. Highlight the Reverse Route option and then press the Thumb Stick In to reverse the order of waypoints in the list. To change the route back to the original order, repeat this process. Rino520_530_prelim.indd 66 1/25/2005 5:01:00 PM

Rino® 530 Owner’s Manual 67PRELIMINARYUNIT OPERATION > ROUTES PAGETo copy the route: 1. From the Route Page, select the on-screen page Option Menu button and press the Thumb Stick In to access the Option Menu.2. Highlight the Copy Route option and then press the Thumb Stick In to copy. The copied route displays on the Routes Page and is named the same but followed by the numeral 1 (one). You may then rename and/or modify the copied route. To delete the route:1. From the Route Page, select the on-screen page Option Menu button and press the Thumb Stick In to access the Option Menu.2. Select Delete and then press the Thumb Stick In. When you see the prompt “Do you really want to delete route?”, select Yes.To restore default settings for the route:1. From the Route Page, select the on-screen page Option Menu button and press the Thumb Stick In to access the Option Menu.2. Select Restore Defaults and then press the Thumb Stick In to restore factory settings. To review a route point:1. Select the point from the Route Points List and press the Thumb Stick In to access the Option Menu for the waypoint. 2. Highlight Review and then press the Thumb Stick In to display the Information Page.3. Highlight the on-screen OK button and then press the Thumb Stick In to return to the Route List.To insert a new point on the route list:1. Select the row where you want the new point inserted before. Press the Thumb Stick In. 2. Highlight Insert and press the Thumb Stick In to display the Find ‘N Go Menu and select a new waypoint, city, exit, point of interest, etc.Rino520_530_prelim.indd 67 1/25/2005 5:01:00 PM

68 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > ROUTES PAGE3. With the new point highlighted, press the Thumb Stick In to display the Information Page for the new point and then select the on-screen OK button to add it the route. Route point review optionsTo remove a point from the route list:1. Select the point that you want to remove from the Route Waypoints List and press the Thumb Stick In.2. Highlight Remove and press the Thumb Stick In to remove the waypoint from the list.To change a route point:1. Select the waypoint that you want to change from the Route Waypoints List and press the Thumb Stick In. 2. Highlight Change and press the Thumb Stick In to display the Find ‘N Go Menu or create a new waypoint and add it to the points list.3. Select a new waypoint, access its Information Page and press the on-screen Use button to replace the old route waypoint. To move a route point:1. Select the point from the Route Points List and press the Thumb Stick In. 2. Highlight the Move option and press the Thumb Stick In to select the waypoint.3. Use the Thumb Stick to move the point up or down in the list. Press the Thumb Stick In to leave the waypoint in the new list order.Rino520_530_prelim.indd 68 1/25/2005 5:01:00 PM

Rino® 530 Owner’s Manual 69PRELIMINARYUNIT OPERATION > ROUTES PAGEAdding or Editing from the Route Map PageYou can use the panning arrow with the Route Map Page displayed to add or edit route waypoints. To add a point at either end of a route:1. Select the Route from the Routes List. Press the Thumb Stick In to display the Route Page.2. Highlight the on-screen Map button at the bottom of the page and press the Thumb Stick In to display the Route Map Page.3. Use the Thumb Stick to move the panning arrow to either end of the displayed route until the end point is highlighted. Then press the Thumb Stick In and select Add Turns. This option appears only when highlighting the end point of a route.4. Move the panning arrow to a map item or location where you would like to extend the route and press the Thumb Stick In to display the Information Page for the new point.5. Press the on-screen Use button to return to the map page and then press the Thumb Stick In again to place the new waypoint.To add a route point within a route:1. Follow steps 1 and 2 in the previous instructions.2. Use the Thumb Stick to move the panning arrow to a route line. When the arrow touches the line, the line becomes thin. Press the Thumb Stick In to display the word ADD next to the line.3. Drag the line to a map item or other location where you want to establish a new waypoint and then press the Thumb Stick In to place the new waypoint. A waypoint information page displays. Press the on-screen OK button to save the new waypoint, then press it again after returning to the Route Map.Rino520_530_prelim.indd 69 1/25/2005 5:01:01 PM

70 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > ROUTES PAGETo review or remove a route point:1. Select the Route from the Routes List. Press the Thumb Stick In to display the Route Page.2. Use the Thumb Stick to highlight the desired route and press In to display the Route Page.3. Use the Thumb Stick to move the map panning arrow to the point you want to review and press In. Select Review or Remove and press In again to either display the Information Page or remove it from the route. Select Next and press In again to view the next waypoint.Navigating a RouteA Route can be navigated using the Map Page or the Navigation Page. The Map Page displays your movement, the route line, and waypoints on the route. The Navigation Page shows compass direction and a bearing pointer.To navigate a route:1. Select a route from the Routes List and then press the Thumb Stick In.2. Highlight the on-screen Navigate button at the bottom of the page and then press the Thumb Stick In to begin navigating the route. The screen changes to the Navigation Page.3. Move to the Map Page to view the route and your current location.4. Begin moving, watching directional information on the Navigation Page or your progress on the Map Page.Route NavigationRino520_530_prelim.indd 70 1/25/2005 5:01:01 PM

Rino® 530 Owner’s Manual 71PRELIMINARYUNIT OPERATION > ROUTES PAGEStopping NavigationTo stop navigation, highlight the Stop Navigation option on either the Navigation or Map page’s Option Menu or select the Stop button on the Route Page.Data Fields for the Route PageWhen navigating a Route, the data displayed in the data ﬁelds on the Route Page may be customized to provide useful navigation information.To select data ﬁeld options: 1. Use the Thumb Stick to highlight a data ﬁeld on the Route Page and then press In to display the data ﬁeld options.2. Use the Thumb Stick to highlight the desired option and press In to select that option for the selected data ﬁeld.Changing the Route Data FieldsData ﬁeld Options for Route Page• Distance to Point• ETA To Point• ETE To Point• Leg Course• Leg Distance• Leg Time• Pointer• Sunrise At Point• Sunset At PointRino520_530_prelim.indd 71 1/25/2005 5:01:01 PM

72 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > TRACKS PAGETracks PageThe Rino 530 draws an electronic bread crumb trail on the Map Page as you travel along. This bread crumb trail is the Track Log. The Track Log contains information about points along its path, including time, and position. The Rino 530 uses this information to allow you to navigate using the saved track. You may also save tracks from other Rino users as they communicate with you.To open the Tracks page:1. Access the Menu Page by using the on-screen menu button or the Page button.2. Select the Tracks icon and press the Thumb Stick In. The Tracks page opens.Tracks PageTo save and use a Track:1. Access the Tracks page from the Main Menu. Press the on-screen Off button In to pause track logging. When track logging is active the On button appears to be recessed.2. Highlight the Save on-screen button and then press the Thumb Stick In to display the track log Save Back Through list.3. Use the Thumb Stick to select the time and date that you would like to save the track through.4. Press the Thumb Stick In to save the track log and display the Track Page. The Track Page shows the track name (which can be renamed using the keyboard for data entry), the total distance of the track, track area (if available), a Show on Map option, and on-screen buttons for Map, OK, and Tracback.Rino520_530_prelim.indd 72 1/25/2005 5:01:02 PM

Rino® 530 Owner’s Manual 73PRELIMINARYUNIT OPERATION > TRACKS PAGEUsing the TracBack FeatureThe TracBack feature allows you to return along a traveled path (or another Rino user’s path) without marking any waypoints. When you are ready to return to where you started, the Rino 530 takes you back by following the Track Log that you left behind. You can save a total of 20 tracks in the unit memory. The Track Log starts recording as soon as the unit gets a satellite location ﬁx and the Track Log feature is turned on. When you no longer need a Track Log you can press the on-screen Clear button to remove it.If you want to keep a record of a certain track log or use the TracBack feature, it is recommended that you clear the Track Log before you start traveling. The percentage of memory used by the current track log is displayed in a window at the top of the page. After the Track Log is Cleared, it displays zero percent. When the display reaches 100%, the most recent track points start to overwrite the least recent if the default setting Wrap When Full remains selected on the track log setup. To avoid losing track points you want, save the Track Log when it approaches the 99% mark. The active track log stores up to 10,000 points.The Saved Track Page displays the track and it can also be displayed on the Main Map Page as you navigate. You may save up to 20 tracks with 250 points per track in the unit. Saved Contact tracks count towards this total. Tracks are marked BEGIN and END.Rino520_530_prelim.indd 73 1/25/2005 5:01:02 PM

74 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > TRACKS PAGETo use the TracBack feature:1. Highlight the Tracback button on the Tracks page and press the Thumb Stick In. The Tracback Menu options (To Beginning and To End) are displayed.2. Highlight the desired option and press the Thumb Stick In to enable.3. Use the Map Page or the Navigation Page to navigate the Track.Setting up the Track LogYou can set the track recording interval to Distance, Time, or Automatic. You can set the Track display resolution to High, Medium, Low, and Lowest. You can also use the Option Menu to delete all saved tracks.To use Track Log Setup options:1. Highlight the Tracks Page Option Menu button at the top of the page and press the Thumb Stick In to display the menu.2. Highlight the Tracks Log Setup option and then press the Thumb Stick In. You can check the Wrap When Full option by highlighting it and then pressing the Thumb Stick In. You can highlight the Record Method and Interval ﬁelds and press the Thumb Stick In to display their options. Interval options change to accommodate the Record Method choices.Rino520_530_prelim.indd 74 1/25/2005 5:01:03 PM

Rino® 530 Owner’s Manual 75PRELIMINARYUNIT OPERATION > PROXIMITY PAGEProximity PageThe Proximity Page lets you deﬁne an alarm circle around a stored waypoint/contact position, and can be used to help you avoid dangerous areas or to alert you when you have strayed too far away from other Rino users. Up to ten waypoints may be listed, with a maximum alarm radius of 99.99 nautical or statute miles or kilometers. If entering a proximity alarm circle, a “Near Proximity Point <name>” message appears. If leaving a proximity alarm circle, a “Leaving Proximity Point <name>” message appears.To access the Proximity Page:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Proximity.To add a proximity point:1. Use the Thumb Stick to highlight an empty space on the Proximity list and press the Thumb Stick In to display the Find ‘N Go screen. Highlight an item from the list and press the Thumb Stick In to open the item.2. From the Review Page, select Use. Press In again to begin entry of the proximity radius. Use the Thumb Stick to enter a distance and press In.To clear one or all proximity point(s) from the list:1. To clear a single alarm, use the Thumb Stick to highlight the proximity point to clear and press In. Choose Remove and press In.2. To clear all proximity waypoints, highlight the Option Menu and press In. Choose Remove All and press the Thumb Stick In.To turn proximity alarms on or off: Use the Thumb Stick to highlight Proximity Alarms and press In to place a check mark.Rino520_530_prelim.indd 75 1/25/2005 5:01:03 PM

76 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > SATELLITE PAGESatellite PageThe Satellite Page provides a picture of satellite signal tracking, tells you when the unit is ready for navigation, and shows your location coordinates.To access the Satellite Page:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Satellite. Satellite PageSkyview GraphicSignal Strength BarsSky View GraphicThe Sky View graphic represents a view looking up at the sky from your current location showing satellites and their assigned numbers. The outer ring represents the horizon around you. The inner ring represents a view above you at a 45° angle from vertical. The center represents directly overhead. Signal Strength Bars for each satellite are shown to the left of the Sky View. Satellites and their signals appear as hollow shapes until a signal is received and then they appear darkened in. The stronger the signal, the taller the signal bar.45°90°Outer ring -the horizonInner ring- 45°above the horizonCenter dot - 90°above the horizonRino520_530_prelim.indd 76 1/25/2005 5:01:04 PM

Rino® 530 Owner’s Manual 77PRELIMINARYUNIT OPERATION > SATELLITE PAGEWAASThe Wide Area Augmentation System (WAAS) capability produces a more accurate position ﬁx. When enabled (GPS set to Normal and WAAS set to Enabled through the System Setup Page, also the interface must be set to something other than RTCM mode), this feature searches for WAAS satellites near your location and then receives data for correcting differentials in the GPS satellite signals. WAAS satellite numbers begin at number 33 or above and are displayed on the Satellite Page. When differential correction data has been received for GPS satellites (numbers 32 or below), a D displays in the signal bar beneath the skyview. It is helpful to orient the unit antenna toward the WAAS satellite shown in the skyview. To learn more about the WAAS System, refer to the Federal Aviation Administration Web site (http://gps.faa.gov/). Because the Rino 530 relies on satellite signals to provide you with navigational guidance, the unit’s view of the sky determines how fast you achieve navigational status. GPS signals do not travel through heavy objects or people: For best results, keep the unit in clear view of the sky.Satellite Page using WAASSatellite StrengthAt least three satellite signals are needed to determine your location, otherwise the unit displays a “Poor Satellite Reception” message with four options:Use with GPS Off—Select this option if you want GPS off.Rino520_530_prelim.indd 77 1/25/2005 5:01:05 PM

78 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > SATELLITE PAGENew Location—Select this option if you have moved more than 600 hundred miles (from where you last used the unit).Restart Search—Select this option if today is not (date provided).Continue Acquiring—Select this option if no other option applies. The unit will attempt to gather GPS signals.Satellite Page OptionsUse With GPS Off—Use this option when you are indoors, your view of the sky is obstructed, or you want to save battery power. You can enter data, create routes, etc., but cannot navigate in this mode.Track Up/North Up—You can orient the satellite skyview by selecting ‘Track Up’ (your direction of travel) or ‘North Up’ (the satellite skyview oriented to the north).New Location—If you are more than 600 miles (from where you last used the unit), select the New Location and then the Use Map options to approximate your location. This gives the unit reference information and speeds satellite acquisition.Satellite Page Option MenuRino520_530_prelim.indd 78 1/25/2005 5:01:05 PM

Rino® 530 Owner’s Manual 79PRELIMINARYUNIT OPERATION > SATELLITE PAGETo select the Use With GPS Off option:1. Use the Thumb Stick to highlight the Option Menu button at the top of the page and then press it In.2. Use the Thumb Stick to highlight the Use With GPS Off option and then press it In. The Rino 530 stops tracking satellites and should not be used for navigation. However, the next time you turn the unit on, it returns to Normal GPS operation.To select Track Up or North Up:1. Use the Thumb Stick to highlight the Option Menu button at the top of the page and then press it In to display the Option Menu.2. Highlight either the Track Up or North Up option (depending on which is currently in use), and press the Thumb Stick In to activate.To enter a new location:1. Use the Thumb Stick to highlight the Option Menu button at the top of the page and then press it In.2. Highlight New Location and press the Thumb Stick In to display choices of Auto or Use Map. If you choose Automatic the Rino 530 determines your new location automatically. If you choose Use Map a map page displays with instructions stating, “Point to your approximate location and press ENTER”. Use the Thumb Stick to move the map pointer to your location on the map and press the Thumb Stick In.Rino520_530_prelim.indd 79 1/25/2005 5:01:06 PM

80 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > SETUP PAGESSetup PagesThe Setup Pages allow you to customize the Rino 530 to your personal preferences. You can choose time settings, units of measure, display backlighting and contrast settings, heading measurement, interface options and system operating mode.By highlighting the icons on the Setup Menu and then pressing the Thumb Stick In, you can display the Setup Page for each of the menu items.To access the Setup Menu1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Setup. There are then several more icons to choose from in the Setup Menu.Time Setup PageYou can set the time to match your location or for a projected location anywhere in the world.To access the Time Setup page:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Setup.3. Select the Time icon to open the Time Setup page.Time Setup PageTime Format—Allows you to choose from 12-hour (like a standard clock with 12-hour AM and PM cycles) or 24-hour time format ( a 24- hour cycle, also called Military Time).Rino520_530_prelim.indd 80 1/25/2005 5:01:06 PM

Rino® 530 Owner’s Manual 81PRELIMINARYUNIT OPERATION > SETUP PAGESTime Zone—Can be set to one of the eight US Time Zones, or 24 International Time Zones (nearest city or geographical region). Select Other so you can enter the UTC Time Offset.Daylight Savings Time—Can be turned On or Off or set to Automatic.To set the time:1. Use the Page button to access the Main Menu.2. Use the Thumb Stick to highlight the Setup Icon. Press the Thumb Stick In to display the Setup Menu.3. Use the Thumb Stick to highlight the Time Icon. Press the Thumb Stick In to display the Time Page.4. Use the Thumb Stick to highlight the Time Zone ﬁeld. Press the Thumb Stick In to display the time zone list.5. Highlight a time zone from the list and then press the Thumb Stick In.6. If you choose Other, you must enter a UTC offset value.7. The correct time displays at the bottom of the page.Units Setup PageThe Units features are best used by individuals with a working knowledge of map grids and datums. To learn more about these subjects, visit the National Imagery and Mapping Agency at http://www.nima.mil or inquire at your local library.To access the Units Setup page:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Setup. 3. Select the Units icon to open the Units Setup page.Units Setup PageRino520_530_prelim.indd 81 1/25/2005 5:01:07 PM

82 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > SETUP PAGESPosition Format—Allows you to choose from different grid formats. The default position format, ‘hddd°mm.mmm’ displays the latitude and longitude in degrees and minutes and is most commonly used. The following additional formats are available:hddd.ddddd°—latitude/longitude in decimal degrees; hddd°mm.mmm’—latitude/longitude in decimal numbers; hddd°mm’ss.s”—latitude/longitude in degrees, minutes, seconds; British Grid; Dutch Grid; EOV Hungarian Grid; Finnish Grid; German Grid; Icelandic Grid; India Zones; Irish Grids; Loran TD; Maidenhead; MGRS; New Zealand; QNG Grid; RT90; South African Grid; Swedish Grid; Swiss Grid; Taiwan Grid; US National Grid; UTM/UpS - Universal Transverse Mercator / Universal Polar Stereographic grids; W Malayan RSO; and User UTM Grid.LORAN TD FormatWhen creating new waypoints using LORAN TD coordinates, you must set the correct LORAN chain number and secondary stations in the Setup TD ﬁeld before storing the waypoint. After the waypoint is stored in unit memory, it always references the LORAN chain number and secondary stations currently selected in the Setup TD ﬁeld. If you enter a different LORAN chain number, change the secondary stations, or offsets in the Setup TD ﬁeld, the active waypoint information reﬂects those changes. Because the unit does not rely on the LORAN signal for navigation, it can reference a different GRI chain and/or secondary stations and still navigate to the location stored in memory.To adjust the Loran TD settings, select Loran TD as the Position Format to open the Loran TD setup window. To change the settings of any ﬁelds, highlight the ﬁeld, press the Thumb Stick In. When done, highlight Save and press In.For more information on Loran TDs, you may download Garmin’s Loran TD Position Format Handbook from the Garmin web site at http://www.garmin.com/support/userManual.jsp.Rino520_530_prelim.indd 82 1/25/2005 5:01:07 PM

Rino® 530 Owner’s Manual 83PRELIMINARYUNIT OPERATION > SETUP PAGESMap Datum—Offers a selection of nearly all map datums in common use. Every map is based on a map datum (a reference model of the earth’s shape) and is usually listed in the title block of the map. If you are comparing GPS coordinates to a paper map, chart, or other reference, the map datum in this ﬁeld must match the horizontal map datum used to generate the map or other reference. The default datum is WGS-84 (World Geodetic Survey 1984) and should only be changed when using maps or charts specifying a different datum. If a map does specify a datum, use the options list to ﬁnd datums applicable to the region of the map, selecting the one that provides the best positioning at a known point. If necessary, you also may choose the User datum for custom designed grids. NOTE: The User datum is based on a WGS-84-Lo-cal datum and is an advanced feature for unlisted or custom datums. To learn more, check your local library or the Internet for educational materials on datums and coordinate systems.Distance/Speed—Choose from three units of measure to display your rate of travel.Elevation/Vertical Speed—Choose from two units of measure to record your elevation and vertical speed.Pressure—Choose from millibars or Inches to measure the pressure. Display Setup PageYou can adjust the amount of time that the backlighting feature stays on and adjust the screen contrast.Backlighting Timeout—Choose from Stays On or delays of 15 seconds, 30 seconds, one minute, or two minutes before timing out.Rino520_530_prelim.indd 83 1/25/2005 5:01:07 PM

84 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > SETUP PAGESContrast Adjustment—Can be adjusted from light to dark using the slider adjacent to the contrast bar.To access the Display Setup page:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Setup.3. Select the Display icon to open the Display Setup page.Display Setup PageTo set the backlighting timeout:1. Highlight the Backlight Timeout ﬁeld and then press the Thumb Stick In.2. Highlight the desired option and then press the Thumb Stick In.To adjust the contrast:1. Highlight the contrast slider and then press the Thumb Stick In.2. Move the Thumb Stick up or down to move the slider to set the contrast.Heading Setup PageYou can select the type of heading displays, the types of North References, or enter the magnetic variation.To access the Heading Setup page:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Setup.3. Select the Heading icon to open the Heading Setup page.Heading Setup Page Rino520_530_prelim.indd 84 1/25/2005 5:01:08 PM

Rino® 530 Owner’s Manual 85PRELIMINARYUNIT OPERATION > SETUP PAGESDisplay—Allows you to choose from Cardinal Letters, Degrees or Mils.North Reference—You can choose from True, Magnetic, Grid or User options. If ‘User’ is chosen, you must correct for the Magnetic Variation. The Electronic or GPS compass uses the North Reference setting to create a bearing.Switch to Compass Heading when Below–Enter the desired speed for the Rino 530 to switch from using GPS to using the compass for guidance.For more than…—Enter a time limit to switch to the compass. When you travel at the speed entered above for the time entered here, the Rino 530 switches from GPS to the compass.To select either option:1. Highlight the ﬁeld and then press the Thumb Stick In to display the options.2. Highlight the option and press the Thumb Stick In to activate.Interface Setup PageThe Interface Settings Page allows you to choose from different input/output serial data formats. This feature is used when connecting to external NMEA devices, a DGPS beacon receiver, a personal computer, etc. See the Appendix for using the Rino 530 with MapSource.To access the Interface Setup page:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Setup.3. Select the Interface icon to open the Interface Setup page.Interface Setup PageRino520_530_prelim.indd 85 1/25/2005 5:01:09 PM

86 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > SETUP PAGESThe available interface formats are: Garmin—The proprietary format used to exchange waypoint, track, and map data with a PC. Use this setting for transferring data when using a MapSource product.Garmin DGPS—Allows DGPS input using a Garmin beacon receiver and a standard RTCM SC-104 and DGPS tuning.NMEA In/NMEA Out—Supports the output of standard NMEA 0183 version 3.0 data. Use this for real-time plotting with MapSource or 3rd party programs.Text Out—Allows ASCII text output of location and velocity information without input capabilities.RTCM IN—Allows DGPS input using a standard RTCM SC-104 format without output capabilities.RTCM In/NMEA Out—Allows DGPS input using a standard RTCM SC-104 format and supports the output of standard NMEA 0183 version 3.0 data.RTCM In/Text Out—Allows DGPS input using a standard RTCM SC-104 format and simple ASCII text output of location and velocity information.None—Provides no interfacing capabilities.If Garmin DGPS or RTCM In/NMEA Out format is selected, additional ﬁelds are provided to control a Garmin differential beacon receiver (e.g. GBR 23) directly from your unit. Tuning is automatic with Scan or you can enter the beacon frequency and bit rate when you select User from the Beacon list to manually tune the receiver. Refer to the beacon receiver instructions.To select a serial data format:1. Highlight the Serial Data Format ﬁeld and then press the Thumb Stick In.2. Highlight an option and then press the Thumb Stick In to activate it.Interface Setup PageRino520_530_prelim.indd 86 1/25/2005 5:01:09 PM

Rino® 530 Owner’s Manual 87PRELIMINARYUNIT OPERATION > SETUP PAGESSystem Setup PageThe System Setup Page allows you to change GPS operation modes, use the WAAS capabilities, turn the Message Beep and compass on or off, and set the altimeter calibration settings to automatic or manual. See the “Appendix” for WAAS capability information.To access the System Setup page:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Setup.3. Select the System icon to open the System Setup page. The Option Menu allows you restore defaults or display the current version of unit operating software and the Unit I.D. Number. Software updates and instructions for downloading are available from the Garmin Web site (www.garmin.com).Choose one of the four GPS options other than Normal to signiﬁcantly save battery power. The Battery Saver mode reduces the rate of satellite signal position updating and the GPS Off option stops satellite signal reception altogether. The Demo Mode simulates navigation.System Setup PageRino520_530_prelim.indd 87 1/25/2005 5:01:09 PM

88 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > CALENDARCalendarThis feature provides you with a monthly calendar with programmable reference notes. You can display one monthly calendar at a time and add reference notes using the data entry keypad. Days that are shaded have notes added. You can create reference notes for multiple months and for months in years yet to come. You can record 100 notes with up to 18 characters each.Calendar PageTo access the Calendar:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Calendar.To change the month and year: Highlight the left or right arrows on either side of the date and press the Thumb Stick In. The left arrow shows past months/years and the right arrow shows future months/years.To use the current month and year Choose Set To Current Date from the Option Menu .To create a reference note for a selected date:1. Use the Thumb Stick to highlight the day of the month and then press In to display the pop-up Menu (containing New Note, View Sun & Moon, and View Hunt & Fish).2. Highlight and select New Note to begin entering text from the keyboard.Rino520_530_prelim.indd 88 1/25/2005 5:01:10 PM

Rino® 530 Owner’s Manual 89PRELIMINARY UNIT OPERATION > CALENDARTo edit or delete a note:1. To edit or delete a note previously created, highlight the date and press the Thumb Stick In.2. Select Edit Note, or Delete Note, from the pop-up menu. To complete the deletion of the note, press the Thumb Stick In when Yes is highlighted in the pop-up window.3. To edit the note, change the desired characters using the keyboard as shown in the image to the right. Press OK when you are ﬁnished editing the note.Editing a note To delete notes by week: 1. Choose Delete Notes... from the Option Menu .2. From the Older Than... window, choose the desired option and press the Thumb Stick In.To view information for a date:1. In the calendar, select the desired date using the Thumb Stick.2. Review the note in the note window below the calendar. 3. Press the Thumb Stick In to display the pop-up menu.4. Select View Sun & Moon to view the Sun & Moon Page for that date. Select View Hunt & Fish to view the Hunt & Fish Page for that date.Rino520_530_prelim.indd 89 1/25/2005 5:01:10 PM

90 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > ALARM CLOCKAlarm ClockThis feature provides an alarm for the system clock. Enter a time in the time ﬁeld and turn the alarm on and off from the control ﬁeld menu. Remember to enter alarm times in the same time format (UTC or local) you are using for your system. The unit must be on for the alarm clock to work.To access the Alarm Clock:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Alarm Clock.To set an alarm clock time:1. Use the Thumb Stick to highlight the time ﬁeld and then press In to display the keyboard.2. Use the Thumb Stick to enter the desired time, choose OK and press In.Alarm Clock PageTo turn the alarm clock on/off:1. Use the Thumb Stick to highlight the Alarm Mode ﬁeld and then press In to display the options.2. Choose On or Off and press the Thumb Stick In.When the alarm sounds, a brief tone is heard (unless Message Beep is Off under System Setup) and “Alarm Clock” appears on the screen. Press the Thumb Stick In to acknowledge the alarm.Rino520_530_prelim.indd 90 1/25/2005 5:01:11 PM

Rino® 530 Owner’s Manual 91PRELIMINARYUNIT OPERATION > CALCULATORCalculatorThis feature provides you with all the basic functions of both of standard or scientiﬁc calculator. You can perform most calculations identiﬁed by the function symbols along the sides of the keypad and can save the results temporarily in the memory. The memory is cleared either manually or when you turn off the Rino 530.To access the Calculator:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select Calculator.Calculator PageTo change calculator options:1. Highlight the page Option Menu and press the Thumb Stick In to display the Scientiﬁc/Standard and Radian/Degrees options.2. Highlight the option you want to change and then press the Thumb Stick In.3. Use the Thumb Stick to move about the calculator, enter numbers, and perform calculations.Rino520_530_prelim.indd 91 1/25/2005 5:01:11 PM

92 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > STOPWATCHStopwatchThis feature allows you to use the unit as a stopwatch, including using it as a lap timer. You may also have the unit record the lap time based on distance. For example, if you set the lap distance to one mile, the unit records the time it takes you to travel one mile.To access the Stopwatch:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select the Stopwatch icon.To use the Stopwatch:1. Use the Thumb Stick to highlight the Start ﬁeld and then press In. You may also press the V (Volume) button to start the stopwatch.2. Use the Thumb Stick to highlight the Stop ﬁeld and then press In. You may also press the V (Volume) button to stop the stopwatch.3. To mark a lap, use the Thumb Stick to highlight the Lap ﬁeld and then press In, with the stopwatch running. You may also press the Z (Zoom) button to capture the lap time.4. Reset the stopwatch when the timer is stopped. Use the Thumb Stick to highlight the Reset ﬁeld and then press In. You may also press the Z (Zoom) button to reset the times.Stopwatch Lap OptionsYou can set the stopwatch to Lap by Distance so that each time a certain distance has been travelled, the stopwatch automatically marks a lap. You can enter a speciﬁc lap distance by selecting Set Lap Distance. To return to manually marking each lap, open the Option Menu and select the Lap by Button Press option.Stopwatch PageRino520_530_prelim.indd 92 1/25/2005 5:01:12 PM

Rino® 530 Owner’s Manual 93PRELIMINARYUNIT OPERATION > SUN & MOONSun & MoonThis feature provides you with a graphic display of both sun and moon positioning for a certain date, time and location with times for sunrise, sunset, moonrise, and moonset.To access the Sun & Moon Page:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select the Sun & Moon icon.To set the date and time:1. For the Date and Current Time, highlight each ﬁeld, then press the Thumb Stick In to begin data entry of individual characters.2. To display the current date and time, highlight the page Option Menu and press the Thumb Stick In to display Use Current Time and then press the Thumb Stick In.To set the location:1. Highlight the Location ﬁeld and then press the Thumb Stick to display the New Location options list.2. Highlight the option desired and then press In on the Thumb Stick to activate. If you choose Current Location the ﬁeld values displayed on the page displays your location. If you choose Use Map, a map page displays. Use the map pointer to identify the desired location and then press In on the Thumb Stick. If you choose Use Find ‘N Go Menu follow instructions in the Find ‘N Go section.Sun & Moon Page Rino520_530_prelim.indd 93 1/25/2005 5:01:12 PM

94 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > HUNT & FISHHunt & FishThis feature provides you with a listing of best times for hunting and ﬁshing for a chosen location and date.To access the Hunt & Fish Page:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select the Hunt & Fish icon.To set the date:1. Highlight the date ﬁeld and then press In on the Thumb Stick to begin data entry of individual characters.2. To display the current date, highlight the page Option Menu and press the Thumb Stick In to display the Use Current Date option and then press the Thumb Stick In.To set the location:1. Highlight the Location ﬁeld and then press In on the Thumb Stick to display the New Location options list.2. Highlight the option desired and then press In on the Thumb Stick to activate. If you choose Current Location the ﬁeld values displayed on the page reﬂect the times at your current location.3. If you choose Use Map, a map page displays. Use the map pointer to identify the desired location and then press In on the Thumb Stick. If you choose Use Find ‘N Go Menu follow instructions for using the Find ‘N Go Menu. NOTE: The times displayed are the recognized best and good times for hunting and ﬁshing. Be certain that they are not in conﬂict with state and local game laws, which may vary from location to location. It is your responsibility to know and abide by these laws.Hunt & Fish PageRino520_530_prelim.indd 94 1/25/2005 5:01:13 PM

Rino® 530 Owner’s Manual 95PRELIMINARYUNIT OPERATION > AREA CALCULATORArea CalculatorThis feature provides you an area calculation as you move about a location or view a saved track. The area calculation displays in acres, hectares, and square feet, square yards, square meters, square kilometers, and square miles.To access the Area Calculator:1. Press the Page button or the Menu icon to open the Main Menu.2. In the Main Menu, scroll down and select the Area Calculator icon.To calculate the area:1. Be sure the Rino 530 has a GPS ﬁx.2. Press Start when you are ready to begin.2. Begin walking or traveling the perimeter (edge) of the area you want to measure.3. Use the Thumb Stick to stop the calculation when you have traveled the desired distance.4. Use the Thumb Stick to store the area as a saved track.Area Calculation PageTo review the area of a saved track:1. On the Tracks page, highlight a Saved Track.2. Press the Thumb Stick In to see a map with the area shown in a data ﬁeld at the bottom.Rino520_530_prelim.indd 95 1/25/2005 5:01:13 PM

96 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > GAMESGamesThe Games Page includes Memory Race, Waypoint Bomber, Clothesline, Assimilation and Beast Hunt. Highlight the appropriate icon and then press the Thumb Stick In to play the desired game. Brief instructions are displayed when you start each game. All players must be on the same channel/squelch code to play.Games MenuMemory RaceBe the ﬁrst to clear the board by matching all of the two symbols sets together. Each symbol is in a square (you can adjust the size) that you need to walk or travel to. Once your position appears in a square, highlight Open at the bottom of the screen and press the Thumb Stick In. Play by yourself or race against others. Press Page to quit at any time.Memory RaceTo adjust the Grid Size or Square Size:1. Highlight the Grid Size or Square Size ﬁeld and press In on the Thumb Stick.2. Choose the desired size and press In.3. Highlight Start and press In to begin the game.Rino520_530_prelim.indd 96 1/25/2005 5:01:14 PM

Rino® 530 Owner’s Manual 97PRELIMINARY UNIT OPERATION > GAMESWaypoint BomberIn this game, it is good to stay on the move! Two or more players attempt to “bomb” each other. Move your cursor around on the map page using your Thumb Stick. When you think an opponent is close to your cursor, drop a bomb. The receiving radio shows an “Incoming” message. If the receiving radio is within the blast circle (about 45 feet), it displays a message that you have been hit. You must wait 30 seconds between shots to reload. Either have a timed game with the winner being the one with the least amount of hits on their radio, or play until someone gets a speciﬁed number of hits (that person loses).Waypoint Bomber HINT: Mark stationary objects such as trees and poles, and drop a bomb when an opposing player is near that object! Adjust the rules to your liking!• To ﬁre at the cursor location, press the Thumb Stick In. • To ﬁre at your current location, press the Talk button.• Press Call to view the scoreboard at any time.• Press Page to quit the game at any time.Rino520_530_prelim.indd 97 1/25/2005 5:01:15 PM

98 Rino® 530 Owner’s ManualPRELIMINARYUNIT OPERATION > GAMESClotheslineTeam members select the same user symbol and then attempt to “hit” or “clothesline” other players by pressing the Talk button when an opposing team member is between them. You may also mark a point and assign it a symbol to be used as a stationary team member. Wait 30 seconds between attempts. Press Call to view the score and Page to quit the game.AssimilationThink of this as a high-tech game of tag. Team members select the same user symbol and then attempt to assimilate others into their team by getting within 30 feet of them and pressing the Talk button. Press Call to show the score and Page to quit the game. You can set a time limit so the largest team wins, or play until the other team is completely assimilated. Set your own rules and enjoy! Beast HuntThe objective is to ﬁnd and kill the beast with an arrow before it incinerates you or you fall into one of several pits while navigating a maze of platforms. You can be transported by slides that curve or move diagonally. When you think you know where the beast is press the Thumb Stick In to initiate aiming when you are in an adjacent spot. With the Thumb Stick, point the arrow in the direction where you think the beast is and press the Thumb Stick In to ﬁre. When you lose a game, the layout of hazards, slides, warning platforms, and the location of the beast is shown. A scoreboard keeps track of your wins and losses. Press Page anytime during the game for further instructions, to turn the sound On/Off, or to quit.Beast HuntRino520_530_prelim.indd 98 1/25/2005 5:01:15 PM

Rino® 530 Owner’s Manual 99PRELIMINARYAPPENDIX > WHAT IS FRS?What is FRS?FRS, or Family Radio Service, is a UHF radio frequency band allocated by the FCC for general public use. The operating frequency ranges from 462.5625 to 467.7125 MHz, with a maximum transmitting power of one half watt. FRS radios are small and lightweight, making them ideally suited for outdoor activities. FRS radios typically feature a half watt of transmit power. You can expect your FRS radio to offer reliable operation at a one-mile range. If the area between you and another FRS operator is free of obstructions, operation up to two miles can be achieved. FRS radios broadcast on one of 14 channels, each with a speciﬁc frequency within the FRS band. The use of FRS radios does not require a license. FRS was intended for use by families and small groups as an inexpensive means of two-way voice communication. FRS is intended for use throughout the United States, its territories and possessions. It may also be used in Canada. FRS is not approved outside of these areas and may interfere with local government communication frequencies (ﬁre, police, etc.). FRS FeaturesMore sophisticated FRS radios also include call functions, squelch codes, channel scan features, and voice scramble capabilities. Call functions allow you to push a Call button on the radio to alert other radios set on the same channel. This feature generates a call tone and is handy in a noisy environment where the tone is easier to initially identify than plain speech.Squelch codes allow you to selectively block out other FRS users that are not part of your group. They will still be talking with others in their own group, but you will not hear them on your radio. They may or may not hear you and members of your group on their own radios. Squelch codes act as a ﬁlter, blocking your FRS radio from hearing other unwanted FRS users. Remember though, these are public-use frequencies and everyone has a right to talk or listen in.Rino520_530_prelim.indd 99 1/25/2005 5:01:15 PM

100 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > WHAT IS FRS?Channel scan allows your FRS radio to scan all FRS frequencies for signals. After scanning brieﬂy to see what channels other users are on, simply set your FRS radios to an unused channel and enjoy less interference. For greater privacy, some FRS radios have a voice scramble feature. This feature causes your message to sound garbled to other FRS users that are not part of your group. However, it does not guarantee your conversations will be 100 percent private and secure. Other casual FRS users will not hear your messages, but users with similar radios or more technically-oriented users can still monitor your conversations.FRS LimitationsIf you are operating in an urban environment or in varying terrain, some features (such as canyons or mountains) act as obstructions limiting the maximum reception range of your FRS radio. The UHF FRS frequencies are “line of sight”, meaning that the signals do not follow the surface of the earth, but instead radiate in a straight line from the transmitting antenna. If there is an obstruction between the transmitting FRS radio and the receiving FRS radio, the signal will not be received. Smaller obstructions, such as trees, cars and even crowds of people cause some loss of signal, resulting in reduced maximum range. GMRSThe use of a GMRS (General Mobile Radio Service) radio requires an FCC license. No license is required in Canada to operate on GMRS channels. The operating frequency of GMRS ranges from 462.550 to 462.725 MHz. GMRS radios can use repeater channels (15R–22R) and repeater towers to extend the range of the operation. A repeater tower simultaneously receives GMRS signals on a 467 MHz frequency and then rebroadcasts the signal on a 462 MHz frequency. Refer to the “Frequency Charts” for a complete list of each channel’s frequency. GMRS repeater channels are not approved for use by the Canadian government, so they are disabled on Rino 530 units sold in Canada. Rino520_530_prelim.indd 100 1/25/2005 5:01:15 PM

Rino® 530 Owner’s Manual 101PRELIMINARY APPENDIX > SPECIFICATIONSSpeciﬁcationsPhysicalCase: Fully-gasketed, high-impact plastic alloy, waterproof to IPX7 standards (waterproof to one meter for 30 minutes)Size: 4.5” H x 2.3” W x 1.6” D; 7” H with antenna (11.4 x 5.8 x 4.1; 17.8 cm)Weight: Approx. 7.6 ounces (236 g) with batteriesTemperature Range: -4° to 158° F (-20° to 70° C) (operating range)Display: 1.4” H x 1.4” W (3.6 cm x 3.6 cm) 60 x 160 pixels, high-contrast LCDPerformanceGPS Receiver: WAAS Enabled, Differential-ready, 12 parallel channelAcquisition time: Approx. 15 seconds (warm start) Approx. 45 seconds (EZinit/cold start) Approx. 5 minutes (First Time/AutoLocate®)Update Rate: 1/second, continuousGPS Accuracy: <15 meters (49 ft) RMS, 95% typical1DGPS (USGC) Accuracy: 3–5 meters (10–16 ft), 95% typical with DGPS corrections2DGPS (WAAS) Accuracy: <3 meters (10 ft), 95% typical with DGPS corrections2Velocity Accuracy: 0.05 meter/sec steady stateDynamics: Performs to speciﬁcations to 6 g’sInterfaces: NMEA 0183, RTCM 104 (for DGPS corrections) and RS-232 for PC interfaceAntenna: Quad-helixRino520_530_prelim.indd 101 1/25/2005 5:01:16 PM

102 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > SPECIFICATIONSRadioChannels: 1–14 FRS, 15–22 GMRS (requires FCC license in the U.S.) 1–7 Weather Radio channelsSquelch Codes: 1–38Range: Up to 2 miles on FRS; up to 5 miles on GMRSRadio Output Power: FRS 0.5 W; GMRS 2.0 W or 5.0 W Alkaline battery pack, 2.0 WPowerInput: Rechargeable 2–cell lithium-ion battery packBattery Life: GPS only: up to 41 hours; FRS only: up to 20 hours; FRS, GPS, and sensors: up to 14 hours3Speciﬁcations are subject to change without notice.1Subject to accuracy degradation to 100m 2DRMS under the U.S. DoD-imposed Selective Availability program.2With optional Garmin Differential Beacon Receiver Input (such as Garmin GBR 23).35, 5, 90 Duty Cycle - 5% receive with audio unmuted, 5% transmit and 90% standby (receive with audio muted)Rino520_530_prelim.indd 102 1/25/2005 5:01:16 PM

Rino® 530 Owner’s Manual 103PRELIMINARY APPENDIX > ACCESSORIESAccessoriesTo obtain accessories, see your local dealer or visit the Garmin web site at www.garmin.com.12-volt Adapter Cable—Provides unit power from an automobile cigarette lighter.2.5 to 3.5 mm Jack Adapter—Allows you to use 3rd party headsets with your Rino unit.Alkaline Battery Pack—can replace the included lithium-ion battery pack.Bash Guard Kit—Helps protect the Rino’s edges against hard shocks. Includes 2 bash guards, quick-release neck lanyard, and belt clip.Carrying Case—Protects the Rino and permits use while in the case.Earbud with PTT (Push To Talk) Mic—Earbud and a clip-on mic with PTT button.Flexible Ear Receiver—Comfortable earpiece for better hearing ability of your Rino.Headset with VOX Boom Mic—Hands-free at its best! Utilize the Rino’s VOX (Voice Operated Transmission) feature with this headset and voice activated boom mic.Instructional Video—For getting accustomed to your Rino basic operations quickly.MapSource Map Data CD-ROMs—An excellent tool for creating waypoints and routes on your PC and downloading them to your Rino.PC Data Cable and 12-volt Adapter—Allows transfer of waypoints and routes from a PC to the Rino and provides unit power from an automobile cigarette lighter.Rail/Handlebar Mount—Allows you to mount your Rino on most rails or handlebars.Suction Cup Mount—Allows you to mount your Rino on most smooth surfaces or windshields.Rino520_530_prelim.indd 103 1/25/2005 5:01:16 PM

104 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > TRANSFERRING MAPSOURCE DATATransferring MapSource DataIf you have purchased a Garmin MapSource CD-ROM mapping program you may want to transfer detailed map data before beginning use, to provide your unit with maximum Find features and mapping capability. The Rino 530 accepts up to 24 MB of map data from most MapSource products. It is not possible to transfer 3rd party maps into Garmin products.You cannot view multiple types of MapSource data in the same location at the same time (one replaces the other if there is an overlap). When you leave a MetroGuide area for example and enter the area of a topographic map, the display changes to contour lines. The same is true when moving from a topo map to a MetroGuide map. The BlueChart maps are at the top of the hierarchy and will replace any other map information. Here is the list of the hierarchy for your reference:1. BlueChart2. MetroGuide3. Fishing Hot Spots4. Points of Interest5. U.S. Waterways & Lights 6. U.S. Topo7. Roads and Recreation8. WorldMapMap data transfer requires the use of a PC, a Garmin MapSource CD-ROM, and the PC Interface Cable with RS-232 serial port connector supplied with this unit. Follow detailed instructions for data transfer in the MapSource User’s Manual.Rino520_530_prelim.indd 104 1/25/2005 5:01:16 PM

Rino® 530 Owner’s Manual 105PRELIMINARYAPPENDIX > TRANSFERRING MAPSOURCE DATATo setup for data transfer:1. Remove the Power/Data Port cover on the back of the unit by lifting up on the protective cover on the back of the unit.2. Connect the serial port connection on the cable to the PC serial port.3. Connect the remaining cable connector to the back of the Rino 530 by orienting the slot on the connector with indexing bar on the back of the unit. Then, slide the connector in place. Be sure that the cable is pushed all the way into the back of the unit.4. Turn on the Rino 530 and follow instructions for map data transfer provided in the MapSource User’s Manual. See also the Interface Setup Page section for unit interface settings.Rino520_530_prelim.indd 105 1/25/2005 5:01:16 PM

106 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > GPS TROUBLESHOOTING GUIDEGPS Troubleshooting GuideSymptom Probable Cause RemedyUnit does not turn on. Batteries are exhausted. Replace batteries.Unit does not turn on, even with new batteries. Batteries may be installed backwards. Reinstall batteries.You are pressing and releasing the Power button. You must press and hold the Power button for 2 seconds.The unit turns on, then turns off. Batteries may be nearly exhausted. Replace batteries.It takes more than ten minutes to get a location ﬁx The unit’s view of satellites is obstructed. Move to a locatin with a clear view of the sky.Cannot access a WAAS system satellite after 2 to 5 minutes.Your view of the satellite is obstructed or you are located too far from satellites currently in service for the AmericasMove to a location with a clear view and point the unit antenna in the direction of the satellite.System GPS operation is set to something other than Normal and/or interface setting is set for RTCM.Set system GPS to Normal and interface to other than RTCM. Or simply turn off WAAS.Cannot obtain a differential position from WAAS You have not collected enough information from the WAAS satellite.Wait 10–20 minutes for the initial collection, then 1–2 minutes afterwards.Cannot access Point of Interest, Street, or Intersection Find Lists.MetroGuide map data is not activated. Access the Map Setup Map option and activate the check box.Cannot view a track being laid down on the map page when traveling.The Track Log feature is turned off. Access the Tracks Page, highlight the On button and press the Thumb Stick In.Cannot see the panning arrow on the Map Page easily.There is too much map clutter or the scale is such that map features are too densely displayed.Use the Map Page Setup Page to reduce map clutter or change the map scale.Cannot exit a menu or page by moving the Thumb Stick to the Left.Some menus and pages have an “X” (Exit) on-screen button in the upper right corner.Highlight the on-screen button and then press the Thumb Stick In.Rino520_530_prelim.indd 106 1/25/2005 5:01:17 PM

Rino® 530 Owner’s Manual 107PRELIMINARYAPPENDIX > RADIO TROUBLESHOOTING GUIDERadio Troubleshooting GuideSymbol Probable Cause RemedyRadio not transmitting Talk key may not be fully depressed Press and hold Talk key until done talking.FRS/GMRS Radio feature may not be on. Turn radio on.Messages not being received by others. Incorrect channel/Squelch Code setting Make sure other radios are on the same channel and Squelch Code.Out of range or obstructions. Decrease distance between radios.Limited talk range. Natural or man-made obstructions can decrease range.Decrease distance between radios or obtain a better line of sight between radios.You can hear others, but they cannot hear you, or you see an incoming transmission, but nothing is heard.You are on the same channel, but a different Squelch Code.If you are using Squelch Code zero (0), you will hear all transmissions on that channel. Use the same Squelch Code (1-38) as the other party or use Scan to ﬁnd what Squelch Code they are on.Message garbled. Scramble option is enabled. Both radios need to have this feature set the same.Too many unwanted conversations being heard. Too many users on channel or Squelch Code is set to zero.Switch to a different channel and/or Squelch Code other than zero (1–38).Interference or static. Radios too far apart or too close. Obstructions in radio line of sight.Keep radios at least 3 feet apart. Obtain a better line of sight between radios.Interference from other electronics. Shut off other devices or move to a different area.Cannot transmit location. Could be one of a few things: Your view of the satellite is obstructed and a GPS ﬁx is not available. Send Location is off. 30 seconds have not elapsed since last location transmission. GPS is set to off.Move to a location with a clear view of the sky. Enable Send Location. Wait 30 seconds between location transmission. Enable GPS.None of the keys except Talk will work. Keylock is enabled. Hold Page for 5 seconds to release keylock.Rino520_530_prelim.indd 107 1/25/2005 5:01:17 PM

108 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > FREQUENCY CHARTSFRS Frequency ChartChannel # Transmit Frequency (MHz) Receive Frequency (MHz) Channel Description1 462.5625 462.5625 FRS 1, GMRS Interstitial 12 462.5875 462.5875 FRS 2, GMRS Interstitial 23 462.6125 462.6125 FRS 3, GMRS Interstitial 34 462.6375 462.6375 FRS 4, GMRS Interstitial 45 462.6625 462.6625 FRS 5, GMRS Interstitial 56 462.6875 462.6875 FRS 6, GMRS Interstitial 67 462.7125 462.7125 FRS 7, GMRS Interstitial 78 467.5625 467.5625 FRS 89 467.5875 467.5875 FRS 910 467.6125 467.6125 FRS 1011 467.6375 467.6375 FRS 1112 467.6625 467.6625 FRS 1213 467.6875 467.6875 FRS 1314 467.7125 467.7125 FRS 14Weather Radio Frequency ChartChannel # Transmit Frequency (MHz) Receive Frequency (MHz) Channel DescriptionWX 1 N/A 162.550 NOAA 1 (Weather Radio)WX 2 N/A 162.400 NOAA 2 (Weather Radio)WX 3 N/A 162.475 NOAA 3 (Weather Radio)WX 4 N/A 162.425 NOAA 4 (Weather Radio)WX 5 N/A 162.450 NOAA 5 (Weather Radio)WX 6 N/A 162.500 NOAA 6 (Weather Radio)WX 7 N/A 162.525 NOAA 7 (Weather Radio) NOTE: If you plan to purchase FRS radios from third party manufacturers be aware that there are CTCSS differences in some radios. Some of the tones on one radio may not be avail-able on other radios. Charts showing the different Squelch Codes and manufacturers can be located on the Internet. NOTE: For use in countries outside of the U.S. or Canada, please check with that govern-ment for any restrictions on FRS or GMRS use.Rino520_530_prelim.indd 108 1/25/2005 5:01:18 PM

Rino® 530 Owner’s Manual 109PRELIMINARYAPPENDIX > FREQUENCY CHARTSGMRS Frequency ChartChannel # Transmit Frequency (MHz) Receive Frequency (MHz) Channel Description15 462.5500 462.5500 GMRS Primary 116 462.5750 462.5750 GMRS Primary 217 462.6000 462.6000 GMRS Primary 318 462.6250 462.6250 GMRS Primary 419 462.6500 462.6500 GMRS Primary 520 462.6750 462.6750 GMRS Primary 621 462.7000 462.7000 GMRS Primary 722 462.7250 462.7250 GMRS Primary 815R 467.5500 462.5500 GMRS Repeater 116R 467.5750 462.5750 GMRS Repeater 217R 467.6000 462.6000 GMRS Repeater 318R 467.6250 462.6250 GMRS Repeater 419R 467.6500 462.6500 GMRS Repeater 520R 467.6750 462.6750 GMRS Repeater 621R 467.7000 462.7000 GMRS Repeater 722R 467.7250 462.7250 GMRS Repeater 8Rino520_530_prelim.indd 109 1/25/2005 5:01:18 PM

110 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > DATA FIELD DEFINITIONSData Field DeﬁnitionsThe following data ﬁeld options are available on the Map, Navigation, Altimeter, and Trip Computer Pages.Ambient Pressure—The uncalibrated current pressure. (Altimeter Page Only.)Average Ascent—The average vertical distance of ascents. (Altimeter Page Only.)Average Descent—The average vertical distance of descents. (Altimeter Page Only.)Barometer—The Calibrated current pressure. (Altimeter Page Only.)Bearing—The direction from your current location to a destination.Course—The direction from your starting location to a destination.Current Destination—The next waypoint on your route.Current Distance—The remaining distance to your next waypoint.Current ETA—The estimated time of day you will arrive at your next waypoint.Current ETE—The estimated time needed to arrive at the next waypoint on your route.Elevation—The altitude (height) above or below sea level.Final Destination—The last waypoint on your route.Final Distance—The remaining distance to your ﬁnal destination.Final ETA—The estimated time of day you will reach your ﬁnal destination.Final ETE—The estimated time needed to reach your ﬁnal destination.GPS Accuracy—The estimated accuracy of the GPS signal.Heading—Your moving direction.Location (lat/lon)—Your current GPS position. (Trip Computer Page Only.)Location (selected)—The lat/lon of point deﬁned on map. (Trip Computer Page Only.)Maximum Ascent—The maximum ascent rate in feet per minute. (Altimeter Page Only.)Maximum Descent—The maximum descent rate in feet per minute. (Altimeter Page Only.)Rino520_530_prelim.indd 110 1/25/2005 5:01:19 PM

Rino® 530 Owner’s Manual 111PRELIMINARYAPPENDIX > DATA FIELD DEFINITIONSMaximum Elevation—The highest elevation reached. (Altimeter Page Only.)Maximum Speed—The maximum speed the unit has moved.Minimum Elevation—The lowest elevation reached. (Altimeter Page Only.)Moving Avg. Speed—Average speed of the unit while moving.Odometer—A running tally of distance travelled, based upon the distance between second-by-second position readings.Off Course—The distance left or right you are from the original course (path of travel).Overall Avg. Speed—Your average speed.Pointer—Indicates the direction to the next destination.Speed—Display rate of travel in miles per hour, kilometers per hour, or nautical miles per hour.Sunrise—The time at which the sun rises on this day.Sunset—The time at which the sun sets on this day.Time of Day—The time for the selected time zone.To Course—The compass direction you must go in order to get back to the original course.Trip Odometer—A running tally of distance travelled since last reset.Trip Time–Moving—A running tally of movement time elapsed since last reset.Trip Time–Stopped—A running tally of stopped time elapsed since last reset.Trip Time–Total—A running tally of all time since last reset. Total Ascent—The total distance ascended. (Altimeter Page Only.)Total Descent—The total distance descended. (Altimeter Page Only.)Turn—The angle difference (in degrees) between the bearing to your destination and your current line of travel. L means turn Left. R means turn Right.Velocity Made Good—The speed at which you are closing on a destination along a desired course.Vertical Speed—Your rate of altitude gain/loss over time.Rino520_530_prelim.indd 111 1/25/2005 5:01:19 PM

112 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > INTERFACE INFORMATIONInterface InformationInterface formats are selected in the Setup Interface Page. See also the “MapSource Setup” section of this Appendix for information on using the Rino 530 with MapSource. The input/output lines on your Rino 530 unit are RS-232 compatible, allowing easy interface to a wide range of external devices, including PC’s, differential beacon receivers, marine autopilots, and /or a second GPS receiver.The NMEA 0183 version 3.0 interface format is supported by the Rino 530 and enables the unit to drive up to three NMEA devices.NMEA 0183 Version 3.0 Approved Sentences:GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, GPVTG, GPWPL, GPBODGARMIN Proprietary Sentences:PGRME (estimated error), PGRMM (datum string), PGRMZ (altitude), PSLIB (beacon receiver control)DGPS (Differential GPS) corrections are accepted in RTCM-SC-104 version 2.0 format through the ‘Data IN’ line. The Garmin GBR 21 and GBR 23 are the recommended beacon receivers for use with the Rino 530. Other beacon receivers with the correct RTCM format may be used, but may not correctly display status or allow tuning control from the GPS unit. The Rino 530 may be hard-wired to a serial connector using a Data Only Cable. Refer to the wiring diagram and the Rino 530 unit data connection illustrated below.The PC Interface Cable provided with this unit allows you to connect your Rino 530 to a PC-compatible computer’s serial port.Rino520_530_prelim.indd 112 1/25/2005 5:01:20 PM

Rino® 530 Owner’s Manual 113PRELIMINARYAPPENDIX > FCC COMPLIANCE INFORMATIONFCC Compliance InformationThe Rino 530 complies with Part 15 of the FCC regulations and with Canadian RSS-210 and ICES-003 for Class B digital devices. Operation of this device is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment generates, uses, and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet that is on a different circuit than the receiver’s circuit.• Consult the dealer or an experienced radio/TV technician for help.The Rino 530 does not contain any user-serviceable parts. Repairs should only be made by an authorized Garmin service center. Unauthorized repairs or modiﬁcations could result in permanent damage to the equipment and void your warranty and your authority to operate this device.Rino520_530_prelim.indd 113 1/25/2005 5:01:20 PM

114 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > FCC LICENSING INFORMATIONFCC Licensing InformationThe Rino 530 two-way radio operates on General Mobile Radio Service (GMRS) frequencies regulated by the Federal Communications Commission (FCC) in the United States. Operation on the GMRS frequencies is subject to additional rules as speciﬁed in 47 CFR Part 95.In order to transmit on GMRS frequencies, you are required to obtain a license from the FCC. An individual 18 years of age or older, who is not a representative of a foreign government, is eligible to apply for a GMRS license. To apply for a GMRS license, you will need FCC Form 605 (605 Main Form and Schedule F) and FCC Form 159. You can download the application forms from the FCC web site at http://www.fcc.gov/Forms/. You can also request them through the FCC forms hotline at 1-800-418-FORM (1-800-418-3676). You can ﬁle Form 605 online at http://wireless.fcc.gov/uls/. A ﬁling fee, which may change from time to time, is associated with this application. For information on fees, see the FCC fee information web page at http://wireless.fcc.gov/feesforms/index.html. General information may be found at http://wireless.fcc.gov/services/personal/generalmobile/.For questions concerning the license application, contact the FCC at 1-888-Call-FCC (1-888-225-5322)No license is required to operate on GMRS channels in Canada. However, GMRS repeater channels are not approved for use by the Canadian government.For use in countries outside of the U.S. and Canada, please check with that government for any restrictions of FRS or GMRS use.Rino520_530_prelim.indd 114 1/25/2005 5:01:20 PM

Rino® 530 Owner’s Manual 115PRELIMINARYAPPENDIX > LIMITED WARRANTYLimited WarrantyThis Garmin product is warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Garmin will at its sole option repair or replace any components that fail in normal use. Such repairs or replacement will be made at no charge to the customer for parts or labor, provided that the customer shall be responsible for any transportation cost. This warranty does not cover failures due to abuse, misuse, accident or unauthorized alteration or repairs.THE WARRANTIES AND REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED OR STATUTORY, INCLUDING ANY LIABILITY ARISING UNDER ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY FROM STATE TO STATE.IN NO EVENT SHALL GARMIN BE LIABLE FOR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER RESULTING FROM THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT OR FROM DEFECTS IN THE PRODUCT. Some states do not allow the exclusion of incidental or consequential damages, so the above limitations may not apply to you.Garmin retains the exclusive right to repair or replace the unit or software or offer a full refund of the purchase price at its sole discretion. SUCH REMEDY SHALL BE YOUR SOLE AND EXCLUSIVE REMEDY FOR ANY BREACH OF WARRANTY.To obtain warranty service, contact your local Garmin authorized dealer or call Garmin Product Support for shipping instructions and an RMA tracking number. The unit should be securely packed with the tracking number clearly written on the outside of the package. The unit should then be sent, freight charges prepaid, to any Garmin warranty service station. A copy of the original Rino520_530_prelim.indd 115 1/25/2005 5:01:20 PM

116 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > LIMITED WARRANTYsales receipt is required as the proof of purchase for warranty repairs.Garmin International, Inc. 1200 E 151st Street, Olathe, Kansas 66062 U.S.A. Tel. 913/397.8200 Fax. 913/397.8282Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL U.K. Tel. 44/0870.8501241 Fax 44/0870.8501251 Online Auction Purchases: Products sold through online auctions are not eligible for rebates or other special offers from Garmin. Online auction conﬁrmations are not accepted for warranty veriﬁcation. To obtain warranty service, an original or copy of the sales receipt from the original retailer is required. Garmin will not replace missing components from any package purchased through an online auction.International Purchases: A separate warranty is provided by international distributors for units purchased outside the United States. This warranty is provided by the local in-country distributor and this distributor provides local service for your unit. Distributor warranties are only valid in the area of intended distribution. Units purchased in the United States or Canada must be returned to the Garmin service center in the United Kingdom, the United States, Canada, or Taiwan for service. The Garmin Rino 530 has no user-serviceable parts. Should you ever encounter a problem with your unit, please take it to an authorized Garmin dealer for repairs.The Rino 530 is fastened shut with screws. Any attempt to open the case to change or modify the unit in any way will void your warranty and may result in permanent damage to the equipment.Rino520_530_prelim.indd 116 1/25/2005 5:01:21 PM

Rino® 530 Owner’s Manual 117PRELIMINARYAPPENDIX > SOFTWARE LICENSE AGREEMENTSoftware License AgreementBY USING THE RINO 530, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY.Garmin grants you a limited license to use the software embedded in this device (the “Software”) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the Software remain in Garmin.You acknowledge that the Software is the property of Garmin and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software are valuable trade secrets of Garmin and that the Software in source code form remains a valuable trade secret of Garmin. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America.Product RegistrationHelp us better support you by completing our online registration today! Have the serial number of your Rino 530 handy and connect to our Web site (http://www.garmin.com). Look for the Product Registration link on our Home page. Use this area to record the serial number (8-digit number located in the battery compartment) in case your Rino 530 is lost, stolen, or needs service. Be sure to keep your original sales receipt in a safe place or attach a photocopy inside the manual.Serial Number: ___ ___ ___ ___ ___ ___ ___ ___Contact GarminIf you should encounter any difﬁculty while using your Rino 530, or if you have any questions, in the U.S.A. contact Garmin Product Support by phone: 913/397.8200 or 800/800.1020, Monday–Friday, 8 AM–5 PM Central Time; or by e-mail at sales@garmin.com. In Europe, contact Garmin (Europe) Ltd. at 44/0870.8501241.Rino520_530_prelim.indd 117 1/25/2005 5:01:21 PM

118 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > WARNINGS AND CAUTIONSWarnings and CautionsThe GPS system is operated by the United States government, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment. Although the Garmin Rino 530 is a precision electronic NAVigation AID (NAVAID), any NAVAID can be misused or misinterpreted and, therefore, become unsafe.The electronic chart is an aid to navigation and is designed to facilitate the use of authorized government charts, not replace them. Only ofﬁcial government charts and notices to mariners contain all information needed for safe navigation—and, as always, the user is responsible for their prudent use.Use the Rino 530 at your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of this Owner’s Manual. When in actual use, carefully compare indications from the Rino 530 to all available navigation sources, including the information from other NAVAIDs, visual sightings, charts, etc. For safety, always resolve any discrepancies before continuing navigation.WARNING: The Rino 530 contains a lithium-ion rechargeable battery pack. The battery used in this device may present a risk of ﬁre or chemical burn if mistreated. Do not recharge out of the unit, disassemble, heat above 140°F (60°C), or incinerate. WARNING: If the original battery must be removed for replacement, dispose of the used battery properly. Contact your local waste disposal department for information on proper disposal of lithium-ion batteries. Keep used batteries away from children. Do not disassemble or dispose of batteries in ﬁre.MAP DATA INFORMATION: One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify (as required) in product literature and copyright messages displayed to the consumer. Virtually all data sources contain inaccurate or incomplete data to some degree. This is particularly true outside the United States, where complete and accurate digital data is either not available or prohibitively expensive.CAUTION: IT IS THE USER’S RESPONSIBILITY TO USE THIS PRODUCT PRUDENTLY. THIS PRODUCT IS INTENDED TO BE USED ONLY AS A NAVIGATIONAL AID AND MUST NOT BE USED FOR ANY PURPOSE REQUIRING PRECISE MEASUREMENT OF DIRECTION, DISTANCE, LOCATION, OR TOPOGRAPHY.Rino520_530_prelim.indd 118 1/25/2005 5:01:21 PM

Rino® 530 Owner’s Manual 119PRELIMINARYAPPENDIX > WARNINGS AND CAUTIONSIMPORTANT: READ THIS INFORMATION BEFORE USING YOUR RINO:Exposure to Radio Frequency Signals—Your wireless handheld radio is a low power radio transmitter and receiver. When it is on, it receives and also sends out radio frequency (RF) signals. In August 1996, The Federal Communications Commissions (FCC) adopted RF exposure guidelines with safety levels for handheld wireless radios. Those guidelines are consistent with safety standards previously set by both U.S. and international standards bodies: American National Standards Institute (ANSI) IEEE. C95.1-1992; National Council on Radiation Protection and Measurements (NCRP) Report 86; International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1996. Those standards were based on comprehensive and periodic evaluations of the relevant scientiﬁc literature. For example, over 130 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI Standard (C95.1). The design of your radio complies with the FCC guidelines (and those standards).For body-worn and face-held operation, this radio demonstrates compliance and meets the FCC RF exposure guidelines for uncontrolled exposure (general population) when used with approved accessories supplied with or designed for this product. Use of other accesssories may not ensure compliance with FCC RF exposure guidelines. Antenna Care—Use only the supplied antenna. Unauthorized antennas, modiﬁcations, or attachments could damage the radio and may violate FCC regulations. Do not use any radio that has a damaged antenna, because if it comes into contact with your skin, a minor burn can result.Electronic Devices—Most modern electronic equipment is shielded from RF signals. However, certain equipment may not be shielded against the RF signals from your wireless radio.Pacemakers—The Health Industry Manufacturers Association recommends that a minimum separation of six inches (6”) be maintained between a handheld wireless radio and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Persons with pacemakers should ALWAYS keep the radio more than six inches from their pacemaker when the radio is turned on, should not carry the radio in a breast pocket, should use the ear opposite Rino520_530_prelim.indd 119 1/25/2005 5:01:21 PM

120 Rino® 530 Owner’s ManualPRELIMINARYAPPENDIX > WARNINGS AND CAUTIONSthe pacemaker to minimize the potential for interference, and should turn the radio off immediately if you have any reason to suspect that interference is taking place.Hearing Aids—Some digital wireless radios may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.Other Medical Devices—If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.Turn your radio OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.Vehicles—RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.Posted Facilities—Turn your radio OFF in any facility where posted notices so require.Commercial Aircraft—Many commercial airlines prohibit the use of FRS radios on board. Switch OFF your radio before boarding an aircraft or check the airline rules.Blasting Areas—To avoid interfering with blasting operations, turn your radio OFF when in a “blasting area” or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.Potentially Explosive Atmospheres—Turn your radio OFF and do not remove your battery when you are in any area with a potentially explosive atmosphere. Obey all signs and instructions. Sparks from your battery in such areas could cause an explosion or ﬁre resulting in bodily injury or even death.Areas with a potentially explosive atmosphere are often, but not always clearly marked. They include fueling areas such as gasoline stations, below deck on boats, fuel or chemical transfer or storage facilities; vehicles using liqueﬁed petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust, or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.Rino520_530_prelim.indd 120 1/25/2005 5:01:22 PM

Rino® 530 Owner’s Manual 121PRELIMINARYINDEXAAccessories 103Accuracy 101Acquisition time 101Address 59Add to Route 52, 53, 55, 56, 58Alarm 75, 90Alarm Clock 90Altimeter Page 37Altitude 37Arriving at Destination 64Arrow 27Ascent 37, 110Auto Zoom 30BBarometric Pressure 38, 39, 41Basemap 1Battery icon 6Battery Life 102Battery Type, Changing 87Bearing 32Bearing Pointer 32, 34, 64BlueChart 104Bread Crumb Trail 72Broken Signals 18Buttons Locked 46CCalendar 88CalibrateAltimeter 41Compass 34, 36Call 99Call Tone 16CDI 33Channel 10City 55Compass 87Calibrate 35Contact 20, 54Course Deviation Indica-tor 33Course Pointer 33, 34CTCSS 10, 108Current location 47DData Fields 28, 34, 40, 41, 71Deﬁnitions 110For Route Page 71Data Transfer 105Defaults 4, 26, 34, 38, 42, 67, 87Delete Waypoint 50Descent 37, 110DGPS 112Display Mode 30EEditingRoutes 66Waypoints 49Electronic Compass 36Elevation 37, 38, 39Cchanges 39Changes 37Plot 39Exit 56FFamily Radio Service 1, 99FCC 99License 100FindingAddress 59By name 51, 52City 55Contact 54Exit 56Intersection 59, 60Point of Interest 57Find ‘N Go 50, 51, 64, 66FRS 1, 7, 10, 99, 108GGames 96Garmin sentences 112General Mobile Radio Service 1GMRS 1, 7, 10, 15, 99Goto 52, 53, 54, 55, 56, 64GPSOn/Off 18, 77Status 18GRI chain 82HHeadset 15Hunt & Fish 52, 53, 55, 56, 58, 94Rino520_530_prelim.indd 121 1/25/2005 5:01:22 PM

122 Rino® 530 Owner’s ManualPRELIMINARYINDEXIInformational Picture 18Initialize 8Interface formats 112Intersection 59, 60KKeylock 5, 46LLap 92Last Found Place 61License Agreement 117Line of sight 100LockButtons/Keys 5, 46Direction 35on Road 30LORAN TD Format 82MMain Display Pages 4Main Menu 45MapSource 1, 24, 59, 65, 86Setup 104Map Data 31, 59, 104Map Detail 30Map Page 24Options 26Pan Map 26Restore Defaults 26Setup Map 26, 29Map Pointer 27Mark Waypoint 47Measure Distance 26, 31Message Tone 16, 63, 87Microphone 15Monitor Channels 12Mr. Mark Waypoint 18My ID 8NName 8Navigate 33, 70Navigation Page 32Options 34Restore Defaults 34Near Map Pointer 55New Contact 20New Location 78, 79NMEA 0183 112North Heading 30North Up 30, 78, 79Note 63, 88OOperating the Rino 5Options Menu 5Orientation 30PPage Sequence Setup 45Pan Map 26, 27PC 104, 112PC Interface Cable 104Peer-to-Peer 14, 20PIT 15Points of Interest 57, 58, 104Poll location 54Pressure 39Changes 37Plot 38, 39View Plot 39Project Waypoint 35, 49, 52, 53, 54, 55, 56, 58Proximity alarms 75RRadio 17Radio Page 7Informational Picture 18Setup Radio 14Weather Radio 17Re-Sight 35Recently Found Places 61Reference note 88Restore Defaults 26, 38, 42Reverse Route 66Review Route 67Ring Tone 16Roger Tone 16Routes 65Copy 67Create 65Data Fields 71Delete 67Edit 66Navigate 70Remove waypoints 66Restore defaults 67Reverse 66Review 67Rino520_530_prelim.indd 122 1/25/2005 5:01:23 PM

Rino® 530 Owner’s Manual 123PRELIMINARY INDEXSSatellite Page 24, 76GPS Off 77New Location 78North Up 78Options 78Track Up 78Scanlist 12, 13, 16Scan Channels 12, 100Scan Codes 12Scramble 14, 100SetupMap 26, 29Page 80Radio 14Scanlist 16TD ﬁeld 82Time Page 80Tones 16Shortcut Menu 5, 46Show Data Fields 34Sight ‘N Go 34, 35Signal Strength 76Sky View 76Speciﬁcations 101Squelch codes 10, 99Status Bar 6Status Bar Icons 6Stop Navigation 26, 34Sun & Moon 52, 53, 55, 56, 58Symbol 8, 9TText Setup 31Thumb Stick 2, 5Time Page 80Tones 16, 90Call 16Ring 16Roger 16Setup 16Topo map 104TracBack 73TrackLog 72Page 72Points 30Setup 30Track Up 30, 78, 79Transmit Location 20, 23Trip Computer Page 42Two-way Radio 1, 99, 114UUHF 99Units Page 81Unlock Buttons 5, 46VVibrate 16Voice Operated Transmis-sion 14Voice Scramble 100VOX 14WWAAS 77, 87Waterproof 1, 101Waypoint 47, 48Create 47, 48Delete 50Edit 49Move 50Project 49Weather Alert 17, 62Weather Radio 17, 62Radio Page 62Shortcut Menu Access 62ZZoom 25, 30Ranges 38, 39Altimeter Page 38Rino520_530_prelim.indd 123 1/25/2005 5:01:24 PM

Rino520_530_prelim.indd 124 1/25/2005 5:01:24 PM

Rino520_530_prelim.indd 125 1/25/2005 5:01:24 PM

For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin web site at www.garmin.com.© Copyright 2005 Garmin Ltd. or its subsidiariesGarmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A.Garmin (Europe) Ltd. Unit 5, The Quadrangle, Abbey Park Industrial Estate, Romsey, SO51 9DL, U.K.Garmin Corporation No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwanwww.garmin.comPart Number 190-00NNN-00 Rev. ARino520_530_prelim.indd 126 1/25/2005 5:01:25 PM