Garmin 01432K LOW POWER COMMUNICATIONS TRANSMITTER User Manual 2

Garmin International Inc LOW POWER COMMUNICATIONS TRANSMITTER Users Manual 2

Contents

Users Manual 2

nüvi® 1200 seriesquick start manualfor use with these nüvi models:1200, 1210, 1250, 1260
2 nüvi 1200 series Quick Start Manual Looking at Your nüvi See the Important Safety and Product Information guide in the product box for product warnings and other important information.Mini-USB connector SpeakermicroSD™ card slot Power button:Press button to turn the nüvi on/off. MicrophoneUsing the Main Menu➊ ➋ ➌ ➍ ➎➏➐➑➒➓➊ GPS satellite strength➋ Bluetooth® technology status➌ Touch to select a usage mode.➍ Current time. Touch to change time settings. ➎ Battery status➏ Touchtondadestination.➐ Touch to view the map. ➑ Touch to make a call when connected to a compatible mobile phone. ➒Touch to adjust the volume➓Touch to use the tools such as settings and Help.
nüvi 1200 series Quick Start Manual 3 Setting Up Your nüviBefore mounting the nüvi, see the Important Safety and Product Information guide for information about laws pertaining to windshield mounting.Mount your nüvi1. Plug the vehicle power cable into the back of your nüvi. 2. Snap the cradle onto the suction cup arm. 3. Remove the clear plastic from the suction cup. Place the suction cup on the windshield.4. Flip the lever back toward the windshield.5. Plug the other end of the vehicle power cable into a power outlet in your vehicle. Your unit should turn on automatically if it is plugged in and the vehicle is running. Follow the on-screen instructions.6. Tilt your nüvi back until it snaps into place. 7. Fit the bottom of your nüvi into the cradle.8. IfyouareusingatrafcreceiverinEurope,connecttheexternalantennatothetrafcreceiver and secure it to the windshield using thesuctioncups.(Trafcreceiversareincludedin some nüvi 205 series packages.)Vehicle power cableVehicle power cableSuction cup mountCradleSuction cup mountCradleWARNING: This product contains a lithium-ion battery. To prevent damage, remove the unit from the vehicle when exiting or store it out of direct sunlight.
4 nüvi 1200 series Quick Start Manual Acquire Satellites 1. Go outdoors to an open area, away from tall buildings and trees.2. Turn on your nüvi. Acquiring satellite signals can take a few minutes. The bars indicate satellite strength. When at least one of the bars is green, your nüvi has acquired satellite signals.Charging Your nüviConnect the vehicle power cable. Connect an AC adapter (optional accessory).Connect a USB cable (included in some packages).Using the Power ButtonPress and quickly release the Power button to view additional options:Touch and to adjust the screen brightness.••••Touch Lock Screen to prevent accidental screen touches. Touch Power Off to turn off your nüvi.Press and hold the Power button to reset your nüvi.Finding Points of Interest1. Touch Where To? > Points of Interest.2. Select a category and a subcategory.3. Select a destination, and touch Go!.4. If necessary, touch Start to navigate the route. To enter letters contained in the name, touch Where To? > Points of Interest > Spell Name.•••
nüvi 1200 series Quick Start Manual 5 Following Your RouteYour route is marked with a magenta line. As you travel, your nüvi guides you to your destination with voice prompts, arrows on the map, and directions at the top of the map. If you depart from the original route, your nüvi recalculates the route.➊➋➌➍➎➏➊ Touch to view the Next Turn page.➋ Touch to view the Turn List page.➌ Touch and to zoom in and out. ➍ Touch to view the Where Am I? page.➎Touch to view the Trip Computer.➏Touch to return to the Main Menu.Touch and drag the map to view a different area of the map. A speed limit icon could appear as you travel on major roadways.Adding a Stop1. While navigating a route, touch Menu > Where to?.2. Search for the extra stop.3. Touch Go!.4. Touch Add as Via Point to addthisstopbeforeyournaldestination. Touch Set as New Destination to make this your new naldestination.
6 nüvi 1200 series Quick Start Manual Taking a Detour1. While navigating a route, touch Menu.2. Touch . NOTE: A recalculate icon appears in place of the detour icon when navigating in pedestrian mode.Using FM TMC TrafcTheFMTrafcMessageChannel(TMC)trafcreceiverisincludedinsome nüvi packages. You do not need to activate the subscription included with your FM trafcreceiver.Thesubscriptionactivates automatically after your nüvi acquires satellite signals while receivingtrafcsignalsfromthepayservice provider. Visit www.garmin.com/trafc or www.garmin.com for more information.Avoiding Trafc on Your Route1. On the Map page, touch the trafcicon.The trafciconchanges color to indicate the severityoftrafcconditionsonyour route or on the road you are currently traveling.2. Touch Trafc on Route. 3. Touch the arrows to view other trafcdelaysonyourroute,ifnecessary.4. Touch Avoid to avoid the delay. Viewing Advertisements (North America Only)Ifyournüvipackageincludesatrafcreceiver, you could receive location-relevant advertisements and coupons. Touch the advertisement on the screen to view more information. CAUTION: Do not attempt to write down the coupon codes while driving.
nüvi 1200 series Quick Start Manual 7 Using Hands-Free FeaturesBluetooth wireless technology is available on some 1200 series models.To use the hands-free features, you must pair your phone and your nüvi. Pairing Your Phone1. EnabletheBluetoothcomponenton your phone. 2. Touch Tools > Settings > Bluetooth.3. Touch the button below Bluetooth, and touch Enabled > OK.4. Touch the button below Phone.5. Touch Add Device > OK.6. Select your phone, and touch OK.7. EntertheBluetoothPIN(1234) for your nüvi in your phone.Calling a Number1. Select Phone > Dial.2. Enterthenumber,andtouchDial.3. To end a call, touch > End Call.Receiving a Call When you receive a call, the Incoming Call window opens. Touch Answer to answer the call. Touch Ignore to ignore the call and stop your phone from ringing. ••
8 nüvi 1200 series Quick Start Manual Securing Your nüviFor more information on securing your nüvi, see the owner’s manual.1. Ensurethatyouareatyoursecurity location and that your nüvi is receiving satellite signals.2. Touch Tools > Settings > Security.3. Touch the button below Garmin Lock.4. Enterafour-digitPIN.5. Touch Set.nüMaps Guarantee™To receive one free map update (if available), register your nüvi at http://my.garmin.com within 60 days of acquiring satellites and driving with your nüvi. You are not eligible for the free map update if you register by phone or wait longer than 60 days afterthersttimeyoudrivewithyournüvi. More InformationFor more information about your nüvi, select Tools > Help. Download the latest version of the owner’s manual from www.garmin.com. For information on accessories, go to http://buy.garmin.com or contact your Garmin dealer. Garmin®, the Garmin logo, and nüvi® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Garmin Lock™ and nüMaps Guarantee™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. microSD™ is a trademark of the SD Card Association.

Navigation menu