Garmin 01633 LOW POWER COMMUNICATIONS TRANSMITTER User Manual

Garmin International Inc LOW POWER COMMUNICATIONS TRANSMITTER Users Manual

a href="https://usermanual.wiki/Garmin" itemprop="url"> Garmin >

Users Manual

ecoRoute ESP Instructions .................................................................. 2ecoRoute ESP Instructions in French ................................................. 4190-01132-91_0A.indd 1 9/14/2009 12:18:24 PM
2ecoRoute ESP InstructionsThe ecoRoute™ ESP device connects to your vehicle’s OBD II (On-Board Diagnostics) connector. The ecoRoute ESP device sends data wirelessly to a compatible Garmin GPS device.OBD II Connector LocationThe location of the OBD II connector varies for each vehicle. For the best view of the connector, open the driver door and kneel.The following are common locations in which to look for the OBD II connector:The OBD II connector is often below the steering column, between the center console and the driver’s door. The OBD II connector might be under a labeled cover. Remove or open the cover to access the connector. The OBD II connector might be under or behind the ash tray or near the power outlet in the center console.Installing the ecoRoute ESP Device WARNINGWhen installing the device in a vehicle, install the device securely so it does not interfere with the vehicle operating controls, such as the foot pedals. Interfering with the vehicle operating controls can result in an accident, which could result in injury or death.Before installing the ecoRoute ESP device, you must nd the OBD II connector in your vehicle. 1. Connect the ecoRoute ESP connector to the OBD II connector in the vehicle. ecoRoute ESP connectorVehicle OBD II connector2. Use the cable ties to secure the ecoRoute ESP device and cable to the vehicle. •••ecoRoute ESP deviceRESET keyCable tiesLEDCustomizing the Cable AngleIf the vehicle requires the cable to be at an angle from the connector, you can use the cable ties to customize the cable for the installation.1. Bend the cable around the connector to suit the installation. 2. Use a cable tie to secure the cable to the connector to t a variety of installation situations. Wirelessly Connecting with a Garmin GPS DeviceBefore wirelessly connecting to a GPS device, you must install the ecoRoute ESP device.1. Start the vehicle. The LED turns green when the ecoRoute ESP device is communicating with your vehicle.2. Turn on the GPS device.3. Bring the GPS device within 10 meters (33 feet) of the ecoRoute ESP device.4. From the Tools menu, touch ecoRoute > ESP Connection.The LED turns blue when the ecoRoute ESP device is connected to your GPS device.About the Wireless Connection to the GPS DeviceThe ecoRoute ESP device and the GPS device automatically connect when they are turned on and are within 10 meters (33 feet) of each other.When it is not connected to a GPS device, the ecoRoute ESP device records the vehicle information and sends the data to the GPS device the next time they connect.OBD II ConnectorOBD II ConnectorCable Secured to the ConnectorCable Secured to the Connector190-01132-91_0A.indd 2 9/14/2009 12:18:26 PM
Download:
Mirror Download [FCC.gov]
Document ID1222958
Application IDJgnUaR8oCVGcPBYHawG1lA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize86.12kB (1076443 bits)
Date Submitted2010-01-06 00:00:00
Date Available2010-01-07 00:00:00
Creation Date2009-09-14 12:18:24
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2009-09-14 12:18:26
Document TitleUsers Manual
Document CreatorAdobe InDesign CS2 (4.0.5)
FCC ID Filing: IPH-01633

Navigation menu