Garmin 01741 LOW POWER TRANSMITTER (2400-2483.5 MHz) User Manual 190 01251 01
Garmin International Inc LOW POWER TRANSMITTER (2400-2483.5 MHz) 190 01251 01
Garmin >
Contents
- 1. Users Manual 1
- 2. Users Manual 2
Users Manual 2
ÂŽ nĂźvi 2300 series quick start manual for use with these nĂźvi models: 2300, 2310, 2340, 2350, 2360, 2370 190-01251-01.indd 1 7/23/2010 11:32:20 AM Getting Started Mounting Your Device n WARNING See the Important Safety and Product Information guide in the product box for product warnings and other important information. NOTICE Before mounting the device, see the Important Safety and Product Information guide for information about laws pertaining to windshield mounting. :KHQXVLQJ\RXUGHYLFHIRUWKHÂżUVW time, complete the following tasks. 1. 2. 3. 4. 5. 1. Remove the clear plastic from the suction cup. Mount the device (page 2). 2. Clean and dry your windshield Connect the device to vehicle and the suction cup with a lint-free power (page 3). cloth. Register the device (page 5). 3. Press the suction cup to the Check for updates. windshield. ⢠Software updates (page 5). :KLOHSUHVVLQJĂLSWKHOHYHUEDFN toward the windshield. ⢠Free map update (page 5). 5. Snap the mount  onto the Download the full ownerâs manual suction cup arm Â. (page 5). 190-01251-01.indd 2 nĂźvi 2300 Series Quick Start Manual 7/23/2010 11:32:20 AM Connecting the Device to Vehicle Power   6. Fit the bottom of your device into the mount. 7. Tilt your device back until it snaps into place. n WARNING This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, remove the device from the vehicle when exiting or store it out of direct sunlight. Charge your device before using it on battery power. 1. Plug the vehicle power cable into the mini-USB connector  on the mount.  2. Plug the other end of the vehicle power cable into a power outlet in your vehicle. nĂźvi 2300 Series Quick Start Manual 190-01251-01.indd 3 7/23/2010 11:32:22 AM ,I\RXDUHXVLQJDWUDIÂżFUHFHLYHU in Europe, connect the external DQWHQQDWRWKHWUDIÂżFUHFHLYHUDQG secure it to the windshield using the suction cups. After the device has been connected to vehicle power, the following occurs. ⢠The device turns on. ⢠The device acquires satellite signals. When at least one of bars is green, your the device has acquired satellite signals. NOTE: The device may need a clear view of the sky to acquire satellite signals. ⢠The device charges as you drive. in the status bar indicates the status of the internal battery. 190-01251-01.indd 4 About myDashboard Use myDashboard to register your device, check for software and map updates, access product manuals and support, and more. Setting Up myDashboard 1. Connect the USB cable to the micro-USB connector on the device. 2. Connect the USB cable to the USB port on your computer. 3. Double-click to open the myDashboard Web page. NOTE: If does not appear, or you are using WindowsÂŽ 7 or a MacÂŽ computer, go to www .garmin.com/dashboard. 4. Follow the on-screen instructions. nĂźvi 2300 Series Quick Start Manual 7/23/2010 11:32:22 AM Registering the Device 1. From myDashboard, click Register Now. 2. Follow on-screen instructions. 3. Keep the original sales receipt, or a photocopy, in a safe place. Updating the Software 1. Open myDashboard (page 4). 2. Register the device (page 5). 3. Under Software Updates, click Update Now. 4. Follow the on-screen instructions. nĂźMaps Guarantee⢠Your device is eligible for one free map update within 60 days of acquiring satellites while driving with your nĂźvi. You are not eligible for the free map update if you register by phone or wait longer than 60 GD\VDIWHUWKHÂżUVWWLPH\RXDFTXLUH satellites while driving with your nĂźvi. For more information, go to nĂźvi 2300 Series Quick Start Manual 190-01251-01.indd 5 www.garmin.com/numaps. Updating Maps 1. Open myDashboard (page 4). 2. Register the device (page 5). 3. Under Map Updates, click Update Now. 4. Follow the on-screen instructions. Downloading the Ownerâs Manual The ownerâs manual for your device is available on the Garmin Web site. 1. Open myDashboard (page 4). 2. Register the device (page 5). 3. Click Manuals. A list of the product manuals in several languages appears. 4. Click Download next to the manual you want. 5. Click WRVDYHWKHÂżOHWR\RXU computer. 7/23/2010 11:32:22 AM Device Overview    Power key ⢠ mircoSD card slot Using the Power Key Press and quickly release the Power key to view additional options. ⢠Touch and drag the scroll bar to adjust screen brightness. ⢠Touch Lock to prevent accidental screen touches. ⢠Touch Power Off to turn off your device. ⢠Press and hold the Power key to reset the device. 190-01251-01.indd 6 ⢠Press and quickly release the Power key to exit the menu. About Points of Interest The detailed maps loaded in your device contain points of interest, such as restaurants, hotels, and auto services. Finding a Point of Interest by Category 1. From the Main menu, touch Where To? > Points of Interest. 2. Select a category. 3. If necessary, select a subcategory. 4. Select a destination. 5. Touch Go!. nĂźvi 2300 Series Quick Start Manual 7/23/2010 11:32:23 AM You can touch > Save on this page to save the location to a Favorites folder on the device. Use the Favorites folder to save the location of your workplace, home, and other common destinations. 6. If necessary, select an option. ⢠Touch Drive to calculate a route you will navigate by driving. ⢠Touch Walk to calculate a route you will navigate by walking. ⢠Touch Public Transit to calculate a route that combines public transit and walking. NOTE: You must have cityXplorer⢠maps loaded to navigate using public transit. Go to www.garmin.com to purchase cityXplorer maps. nĂźvi 2300 Series Quick Start Manual 190-01251-01.indd 7 Using the Main Menu         ⢠Touch  to select a transportation mode. ⢠Touch  WRÂżQGDGHVWLQDWLRQ ⢠Touch  to view the map. ⢠Touch  to stop a route. ⢠Touch  to detour a route. ⢠On some models, touch  to make a call when connected to a compatible mobile phone. See www.garmin.com/bluetooth for information. ⢠Touch  to adjust the volume. ⢠Touch  to open the menu of tools and settings. 7/23/2010 11:32:23 AM Your Route on the Map ⢠Touch  to view the next turn. If a view of the junctions exists, the NOTICE junction view appears. The speed limit icon feature is for ⢠Touch  to view the turn list. information only and does not replace ⢠Touch  to zoom in and out. the driverâs responsibility to abide by all posted speed limit signs and to ⢠Touch  to return to the Main use safe driving judgment at all times. menu. Garmin will not be responsible for Touch and hold from any screen to DQ\WUDIÂżFÂżQHVRUFLWDWLRQVWKDWyou return to the Main menu. may receive for failing to follow all Touch  WRFKDQJHWKHGDWDÂżHOG ⢠DSSOLFDEOHWUDIÂżFODZVDQGVLJQV ⢠Touch  to view the Where Am   I? page. Touch and drag  to view a ⢠ different area of the map.   ⢠Touch  to view the trip computer.     Your route is marked with a magenta ⢠Touch  to change the speed limit if the speed limit icon shown on line on the map. If you depart from the map is incorrect. the original route, your device recalculates the route. A speed limit icon could appear as you travel on major roadways. 190-01251-01.indd 8 nĂźvi 2300 Series Quick Start Manual 7/23/2010 11:32:23 AM Using myTrends⢠As you drive with the device on, myTrends gathers information that allows the device to predict when you are traveling to a common destination, like your workplace or home. When myTrends is activated, the destination and estimated time of travel will appear in the navigation bar on the map. myTrends only works for locations that are saved as Favorites (page 7). When myTrends information appears in the navigation bar, touch the navigation bar to view route information. nĂźvi 2300 Series Quick Start Manual 190-01251-01.indd 9 About the Transportation Modes Automobile mode Pedestrian mode Routes are calculated differently based on your transportation mode. For example, in Automobile mode, estimated time of arrival is calculated using the speed limit of the roads on the route. Pedestrian mode calculates time of arrival based on walking speed. Changing Your Transportation Mode 1. From the Main menu, touch the transportation mode icon. 2. Select a mode. 3. Touch Save. 7/23/2010 11:32:23 AM $ERXW7UDIÂżF NOTICE Garmin is not responsible for the DFFXUDF\RUWLPHOLQHVVRIWKHWUDIÂżF information. Some models can receive FM 7UDIÂżF0HVVDJH&KDQQHO 70& WUDIÂżFFRQWHQW7KH)070&WUDIÂżF subscription is automatically enabled and does not require an addition subscription purchase to activate. The )070&WUDIÂżFUHFHLYHULVLQWHJUDWHG in the vehicle power cable included in the box. 0DQXDOO\$YRLGLQJ7UDIÂżFRQ Your Route 1. From the map, touch . 2. Touch 7UDIÂżF2Q5RXWH. 3. If necessary, touch the arrows to YLHZRWKHUWUDIÂżFGHOD\VRQ\RXU route. 4. Touch Avoid. 9LHZLQJWKH7UDIÂżF0DS The WUDIÂżFPDSshows color-coded WUDIÂżFĂRZDQGGHOD\Von nearby roads. 1. From the map, touch . )RULQIRUPDWLRQDERXWWUDIÂżFUHFHLYHUV 2. Touch 7UDIÂżF0DSto view the WUDIÂżFLQFLGHQWVRQDPDS and coverage areas, go to www JDUPLQFRPWUDIÂżc. 10 190-01251-01.indd 10 nĂźvi 2300 Series Quick Start Manual 7/23/2010 11:32:23 AM Pairing Your Phone Power Cables Hands-free calling is available on some nĂźvi models. Before you can pair, your phone and the device must be turned on and within 33 ft. (10 m) of each other. Your device can be powered by the following ways: 1. Enable the BluetoothÂŽ component on your phone. 2. Touch Tools > Settings > Bluetooth. 3. Touch Bluetooth > Enabled > Save. 4. Touch Add Phone > OK. 5. Select your phone, and touch OK. 6. Enter the Bluetooth PIN (1234) for your device in your phone. nĂźvi 2300 Series Quick Start Manual 190-01251-01.indd 11 ⢠Vehicle power cable ⢠USB cable (optional accessory) ⢠AC adapter (optional accessory) Getting More InformationHelp. 11 7/23/2010 11:32:23 AM Contacting Garmin Product Support Contact Garmin Product Support if you have any questions about this product: ⢠In the USA, go to www .garmin.com/support, or call Garmin USA at (800) 800.1020. ⢠In the UK, call Garmin (Europe) Ltd. at 0808 2380000. ⢠In Europe, go to www.garmin .com/support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241. July 2010 12 190-01251-01.indd 12 GarminÂŽ, the Garmin logo, and nĂźviÂŽ are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. cityXplorerâ˘, myTrendsâ˘, and nĂźMaps Guarantee⢠are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin. The BluetoothÂŽ word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. MacÂŽ is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. Š 2010 Garmin Ltd. or its subsidiaries Part Number 190-01251-01 Rev. A Printed in Taiwan nĂźvi 2300 Series Quick Start Manual 7/23/2010 11:32:23 AM
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2010:08:02 07:58:48-05:00 Modify Date : 2010:08:02 07:58:48-05:00 Metadata Date : 2010:08:02 07:58:24-06:00 Creator Tool : PScript5.dll Version 5.2.2 Document ID : uuid:617E9CA2359EDF119D46E92BBE8F9079 Instance ID : uuid:ed8eeea6-1726-4a3f-b6c2-40df634ad71f Derived From Instance ID : uuid:b4fa4df0-2069-479b-90f0-6609c0dc5bb6 Derived From Document ID : uuid:af7d8f87-a673-4b90-8edf-5554b1f8dde7 Format : application/postscript Title : 190-01251-01.pdf Creator : tebeest Page Count : 12 Author : tebeestEXIF Metadata provided by EXIF.tools