Garmin 02117 2.4 GHz DIGITAL TRANSMISSION SYSTEM User Manual

Garmin International Inc 2.4 GHz DIGITAL TRANSMISSION SYSTEM

Contents

User Manual

TITLESIZE PARTNO: REV:SCALE Sheet Of10.0"6.5"13.0"Trimmeddimensions TrimmedandbounddimensionsBinding CoverTwo-pageLayoutDimensionsanddrawingsforreferenceonly.Drawingsarenottoscale.CoverCoverSPECIFICATION CONTROL DRAWINGRevisionsRev. Date Description ECO No. A 2/25/13 ProductionRelease ––––Specications1.Description Productdocumentation,GPSMAP500/700echoMAP50/70SeriesOwner'sManual(EN-US)2.Size Trimmed:Width=13.0"Height=10.0".Finished,Folded:Width=6.5",Height=10.0".3.Tolerance ±0.0787"(±2mm)4.Pagination 40pages5.Material Cover:200-lbcoatedivoryboard.Text:100-lbmatte-nishoffset.ApprovedEquivalentsAllowed6.Finish Cover:WaterproofMatte.Text:Matte.ApprovedEquivalentsAllowed.7.Color 4-colorprocess.8.Bindery Saddle-stitched.ApprovedEquivalentsAllowed.9.Folds N/A10.ElectronicArtwork ShallconformtoGarminArchive190-01556-00_0A.zip11.Languages English12.Notes ThispartshallcomplywithGarminBanned&RestrictedSubstances(GPN001-00211-00).CONFIDENTIALThisdrawingandthespecicationscontainedhereinarethepropertyofGarminLtd.oritssubsidiariesandmaynotbereproducedorusedinwholeorinpartasthebasisformanufactureorsaleofproductswithoutwrittenpermission.GarminLtd.oritssubsidiariesC/OGarminInternational,Inc.1200E.151stStreetOlathe,Kansas66062U.S.A.Initials DateGPSMAP 500/700 echoMAP 50/70 Series Owner's Manual (EN-US)DrawnBy: KEG 2/25/13A190-01556-00 ACheckedBy:ProjectManager:N/AApprovedBy: 1 41FilesThe following les have been archived under the above ARCHIVE FILENAME.File Name File Contents190-01556-00_0A.pdf PortableDocumentFormat,manualandspecicationsheetforprinting190-01556-00_0A_Spec.indd InDesignCS4,DocumentspecicationsheetGPS_echoMAP_5_7_OM_EN.pdf PortableDocumentFormat,manualforonlinepostingandCD-ROM
GPSMAP® 500/700 Series andechoMAP™ 50/70 SeriesOwner’s ManualMarch 2013 190-01556-00_0A Printed in Taiwan
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reservesthe right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization ofsuch changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.Garmin®, the Garmin logo, BlueChart®, g2 Vision®, GPSMAP®, and MapSource® are trademarks of Garmin Ltd. or its subsidiaries, registered in theUSA and other countries. echoMAP™, GXM™, and HomePort™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be usedwithout the express permission of Garmin.The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Garmin is under license. iOS® is a registeredtrademark of Cisco Systems, Inc. used under license by Apple Inc. microSD™ is a trademark of SD-3C, LLC. NMEA®, NMEA 2000®, and the NMEA2000 logo are registered trademarks of the National Marine Electronics Association. SiriusXM™ is a registered trademark of SiriusXM Radio Inc. All othertrademarks and copyrights are the property of their respective owners. Other trademarks and trade names are those of their respective owners.
Table of ContentsIntroduction................................................................ 1Device Views ........................................................................ 1echoMAP 70 Series and GPSMAP 700 Series............... 1Using the Touchscreen.............................................. 1echoMAP 50 Series and GPSMAP 500 Series............... 1Device Keys............................................................... 1Tips and Shortcuts................................................................. 1GPS Satellite Signals............................................................ 1Adjusting the Backlight.......................................................... 1Adjusting the Color Mode...................................................... 1Customizing the Home Screen.............................................. 1Inserting Memory Cards........................................................ 2Charts and 3D Chart Views....................................... 2Navigation Chart and Offshore Fishing Chart........................ 2Zooming In and Out of the Chart..................................... 2Panning the Chart............................................................ 2Selecting an Item on the Map Using the Device Keys..... 2Chart Symbols................................................................. 2Navigating to a Point on the Chart................................... 3Viewing Location and Object Information on a Chart...... 3Viewing Details about Navaids........................................ 3Premium Charts............................................................... 3Viewing Tide Station Information............................... 4Showing Satellite Imagery on the Navigation Chart... 4Viewing Aerial Photos of Landmarks......................... 4Automatic Identification System............................................ 4AIS Targeting Symbols.................................................... 5Heading and Projected Course of Activated AISTargets ............................................................................. 5Showing AIS Vessels on a Chart or 3D Chart View........ 5Activating a Target for an AIS Vessel.............................. 5Viewing Information about a Targeted AIS Vessel.... 5Deactivating a Target for an AIS Vessel.................... 5Viewing a List of AIS Threats........................................... 5Setting the Safe-Zone Collision Alarm............................. 5AIS Distress Signals........................................................ 6Navigating to a Distress Signal Transmission............ 6AIS Distress Signal Device Targeting Symbols......... 6Enabling AIS Transmission Test Alerts...................... 6Turning Off AIS Reception............................................... 6Chart and 3D Chart View Settings......................................... 6Navigation and Fishing Chart Setup................................ 6Waypoints and Tracks Settings on the Charts and ChartViews............................................................................... 6Overlay Numbers Settings............................................... 7Editing the Data Fields............................................... 7Showing a Navigation Inset............................................. 7Chart Appearance Settings.............................................. 7Other Vessels Settings on the Charts and Chart Views.. 7AIS Display Settings.................................................. 7Fish Eye 3D Settings....................................................... 8Navigation with a Chartplotter.................................. 8Basic Navigation Questions................................................... 8Destinations........................................................................... 8Searching for a Destination by Name.............................. 8Selecting a Destination Using the Navigation Chart........ 8Searching for a Destination Using Nav Info..................... 8Searching for a Marine Services Destination................... 8Courses................................................................................. 8Setting and Following a Direct Course Using Go To....... 9Setting and Following a Course Using Auto Guidance.... 9Autopilot Navigation......................................................... 9Stopping Navigation.............................................................. 9Waypoints.............................................................................. 9Marking Your Present Location as a Waypoint................ 9Creating a Waypoint at a Different Location.................... 9Marking and Navigating to an MOB Location.................. 9Viewing a List of all Waypoints........................................ 9Editing a Saved Waypoint................................................ 9Moving a Saved Waypoint............................................... 9Browsing for and Navigating to a Saved Waypoint.......... 9Deleting a Waypoint or an MOB.................................... 10Deleting All Waypoints................................................... 10Routes................................................................................. 10Creating and Navigating a Route From Your PresentLocation......................................................................... 10Creating and Saving a Route......................................... 10Viewing a List of Routes................................................ 10Editing a Saved Route................................................... 10Browsing for and Navigating a Saved Route................. 10Browsing for and Navigating Parallel to a Saved Route 10Deleting a Saved Route................................................. 11Deleting All Saved Routes............................................. 11Tracks.................................................................................. 11Showing Tracks............................................................. 11Setting the Color of the Active Track............................. 11Saving the Active Track................................................. 11Viewing a List of Saved Tracks...................................... 11Editing a Saved Track.................................................... 11Saving a Track as a Route............................................ 11Browsing for and Navigating a Recorded Track............ 11Deleting a Saved Track................................................. 11Deleting All Saved Tracks.............................................. 11Retracing the Active Track............................................. 11Clearing the Active Track............................................... 11Managing the Track Log Memory During Recording..... 11Configuring the Recording Interval of the Track Log..... 12Deleting All Saved Waypoints, Routes, and Tracks............ 12Combinations........................................................... 12Selecting a Combination...................................................... 12Customizing the Combinations Screen............................... 12Gauges and Almanac Information..........................12Viewing the Compass.......................................................... 12Viewing Trip Gauges........................................................... 12Resetting Trip Gauges................................................... 12Viewing Engine and Fuel Gauges....................................... 12Customizing Engine Gauge and Fuel Gauge Limits...... 12Enabling Status Alarms for Engine Gauges.................. 12Enabling Some Engine Gauge Status Alarms............... 13Selecting the Number of Engines Shown in Gauges..... 13Customizing the Engines Shown in Gauges.................. 13Configuring the Fuel Gauges Display............................ 13Setting the Fuel Capacity of the Vessel......................... 13Synchronizing the Fuel Data with the Actual VesselFuel................................................................................ 13Setting the Fuel Alarm................................................... 13Viewing the Wind Gauges................................................... 13Configuring the Speed Source....................................... 13Configuring the Heading Source of the Wind Gauge..... 13Selecting the Range of the Close-Hauled Wind Gauge. 13Table of Contents i
Viewing the Environment Gauges....................................... 13Configuring the Alignment of the Wind Gauge.............. 13Configuring the Heading Source of the EnvironmentGauge............................................................................ 14Setting the Barometer Reference Time......................... 14Tide, Current, and Celestial Information.............................. 14Tide Station Information................................................. 14Current Station Information............................................ 14Celestial Information...................................................... 14Viewing Tide Station, Current Station, or CelestialInformation for a Different Date..................................... 14Viewing Information for a Different Tide or CurrentStation ............................................................................ 14Viewing Almanac Information from the NavigationChart.............................................................................. 14Sonar......................................................................... 14Full-Screen Sonar View....................................................... 14Split-Zoom Sonar View........................................................ 14Split-Frequency Sonar View................................................ 14Pausing the Sonar Display.................................................. 15Creating a Waypoint on the Sonar Screen.......................... 15Adjusting the Gain on the Sonar Screen............................. 15Adjusting the Range of the Depth Scale.............................. 15Setting the Zoom Level on the Sonar Screen...................... 15Selecting Frequencies......................................................... 15Turning On the A-Scope...................................................... 15Sonar Setup ........................................................................ 15Sonar Settings............................................................... 15Sonar Appearance Settings........................................... 15Advanced Sonar Settings.............................................. 15Sonar Alarm Settings..................................................... 15Recording the Sonar Display............................................... 16Stopping the Sonar Recording....................................... 16Depth and Water Temperature Graphs............................... 16Setting the Depth and Water Temperature Graph Rangeand Time Scales............................................................ 16Radar......................................................................... 16Radar Display Modes.......................................................... 16Transmitting Radar Signals................................................. 16Adjusting the Zoom Scale on the Radar Screen................. 16Tips for Selecting a Radar Zoom Scale......................... 16Sentry Mode........................................................................ 17Enabling Timed Transmit............................................... 17Setting the Standby and Transmit Times....................... 17Enabling a Guard Zone.................................................. 17Defining a Circular Guard Zone..................................... 17Defining a Partial Guard Zone....................................... 17Marking a Waypoint on the Radar Screen..................... 17Viewing a List of AIS Threats......................................... 17Showing AIS Vessels on the Radar Screen.................. 17VRM and EBL...................................................................... 17Showing the VRM and the EBL..................................... 18Adjusting the VRM and the EBL.................................... 18Measuring the Range and Bearing to a Target Object.. 18Radar Overlay..................................................................... 18Radar Overlay and Chart Data Alignment..................... 18Showing the Radar Overlay........................................... 18Stopping the Transmission of Radar Signals...................... 18Optimizing the Radar Display.............................................. 18Range of Radar Signals................................................. 18Radar Gain and Clutter.................................................. 18Automatically Adjusting Gain on the Radar Screen. 18Manually Adjusting Gain on the Radar Screen........ 18Minimizing Nearby Large-Object Interference......... 19Minimizing Side-Lobe Interference on the RadarScreen......................................................................19Adjusting Sea Clutter on the Radar Screen............. 19Adjusting Rain Clutter on the Radar Screen............ 19Reducing Cross Talk Clutter on the Radar Screen.. 19Radar Display Settings.................................................. 19Radar Appearance Settings........................................... 19Front-of-Boat Offset....................................................... 20Measuring the Potential Front-of-Boat Offset.......... 20Setting the Front-of-Boat Offset............................... 20Digital Selective Calling.......................................... 20Networked Chartplotter and VHF Radio Functionality......... 20Turning On DSC.................................................................. 20DSC List.............................................................................. 20Viewing the DSC List..................................................... 20Adding a DSC Contact................................................... 20Incoming Distress Calls....................................................... 20Navigating to a Vessel in Distress................................. 20Man-Overboard Distress Calls Initiated from a VHFRadio............................................................................. 20Man-Overboard Distress Calls Initiated from theChartplotter.................................................................... 20Position Tracking................................................................. 20Viewing a Position Report.............................................. 21Navigating to a Tracked Vessel..................................... 21Creating a Waypoint at the Position of a TrackedVessel............................................................................ 21Editing Information in a Position Report........................ 21Deleting a Position-Report Call...................................... 21Viewing Vessel Trails on the Chart................................ 21Individual Routine Calls....................................................... 21Selecting a DSC Channel.............................................. 21Making an Individual Routine Call................................. 21Making an Individual Routine Call to an AIS Target...... 21Viewing Video.......................................................... 21Configuring the Video Appearance...................................... 21SiriusXM™................................................................ 22SiriusXM Equipment and Subscription Requirements......... 22Weather Data Broadcasts................................................... 22Viewing Precipitation Information........................................ 22Precipitation Views........................................................ 22Storm Cell and Lightning Information.................................. 22Hurricane Information.......................................................... 22Weather Warnings and Weather Bulletins........................... 22Forecast Information............................................................ 23Viewing Forecast Information for Another Time Period. 23Viewing a Marine Forecast or an Offshore Forecast..... 23Weather Fronts and Pressure Centers.......................... 23City Forecasts................................................................ 23Viewing Sea Conditions....................................................... 23Surface Winds............................................................... 23Wave Height, Wave Period, and Wave Direction.......... 23Viewing Forecast Sea Conditions Information for AnotherTime Period................................................................... 24Viewing Fishing Information................................................ 24Surface Pressure and Water Temperature Data........... 24Forecasting Fish Locations............................................ 24Visibility Information............................................................. 24ii Table of Contents
Viewing Forecast Visibility Information for Another TimePeriod............................................................................ 24Viewing Buoy Reports......................................................... 24Viewing Local Weather Information near a Buoy........... 24Creating a Waypoint on a Weather Chart............................ 24Weather Overlay.................................................................. 24Turning On the Weather Overlay on a Chart................. 24Weather Overlay Settings on the Navigation Chart....... 24Weather Overlay Settings on the Fishing Chart............ 25Viewing Weather Subscription Information.......................... 25SiriusXM Radio.................................................................... 25Customizing the Channel Guide.................................... 25Saving a SiriusXM Channel to the Presets List............. 25Adjusting SiriusXM Satellite Radio Volume................... 25Device Configuration............................................... 25Turning On the Chartplotter Automatically.......................... 25System Settings................................................................... 25GPS Settings................................................................. 25Viewing the Event Log................................................... 25Viewing System Software Information........................... 25My Vessel Settings.............................................................. 25Setting the Keel Offset................................................... 26Calibrating a Water Speed Device................................. 26Setting the Water Temperature Offset........................... 26Communications Settings.................................................... 26NMEA 2000 and NMEA 0183........................................ 27NMEA 0183..............................................................27NMEA 2000..............................................................27Communication with Wireless Devices ......................... 27Connecting a Bluetooth Wireless Device................. 27Disconnecting a Bluetooth Wireless Device............ 27Setting Up the Wireless Network............................. 27Connecting a Wireless Device to the Chartplotter... 27Setting Alarms..................................................................... 27Navigation Alarms.......................................................... 27System Alarms............................................................... 27Setting the Fuel Alarm................................................... 27Setting Weather Alarms................................................. 28Units Settings...................................................................... 28Navigation Settings.............................................................. 28Auto Guidance Line Configurations............................... 28Adjusting the Distance from Shore.......................... 28Other Vessel Settings.......................................................... 29Viewing System Software Information................................. 29Restoring the Original Chartplotter Factory Settings........... 29Chartplotter Data Management...............................29Copying Waypoints, Routes, and Tracks to a Chartplotter.. 29Copying Data from a Memory Card..................................... 29Copying Waypoints, Routes, and Tracks to a MemoryCard..................................................................................... 29Copying Waypoints, Routes, and Tracks to or from allChartplotters on a NMEA 2000 Network............................. 29Copying Built-In Maps to a Memory Card............................ 30Backing Up Data to a Computer.......................................... 30Restoring Backup Data to a Chartplotter............................. 30Saving System Information to a Memory Card.................... 30Appendix.................................................................. 30Registering Your Device...................................................... 30Calibrating the Touchscreen................................................ 30Updating the Device Software............................................. 30Screenshots ......................................................................... 30Capturing Screenshots.................................................. 30Copying Screenshots to a Computer............................. 30NMEA 0183 Information...................................................... 30NMEA 2000 PGN Information............................................. 31Index......................................................................... 32Table of Contents iii
Introduction WARNINGSee the Important Safety and Product Information guide inthe product box for product warnings and other importantinformation.Device ViewsechoMAP 70 Series and GPSMAP 700 SeriesÀPower keyÁAutomatic backlight sensorÂTouchscreenÃmicroSD™ memory card slotUsing the Touchscreen•Tap the screen to select an item.• Drag or swipe your finger across the screen to pan orscroll.• Pinch two fingers together to zoom out.• Spread two fingers apart to zoom in.Locking the TouchscreenYou can lock the touchscreen to prevent inadvertent screentouches.1Select .2Select Lock Touchscreen.echoMAP 50 Series and GPSMAP 500 SeriesÀAutomatic backlight sensorÁPower keyÂDevice keysÃmicroSD memory card slotDevice KeysTurns on and off the device when held.Adjusts the backlight and color mode.Zooms out of a chart or view.Zooms in to a chart or view. Scrolls, highlights options, and moves the cursor.Select Acknowledges messages and selects options.Back Returns to the previous screen.Mark Saves the present location as a waypoint.Home Returns to the Home screen.Menu Opens a menu of options for the page, when applicable.Closes a menu, when applicable.Tips and Shortcuts• Select Home from any screen to return to the Homescreen.• Select Menu from any main screen to access additionalsettings about that screen.• Press to adjust the backlight and lock the touchscreen.•Hold to turn the chartplotter on or off.GPS Satellite SignalsWhen you turn on the chartplotter, the GPS receiver mustcollect satellite data and establish the current location. Whenthe chartplotter acquires satellite signals, appears at thetop of the Home screen. When the chartplotter loses satellitesignals, disappears and a flashing question markappears over on the chart.For more information about GPS, go to www.garmin.com/aboutGPS.Adjusting the Backlight1Select Settings > System > Display > Backlight.TIP: Press from any screen to access the backlightsettings.2Select an option:•Adjust the backlight level.• Select Enable Auto Backlight or Auto.Adjusting the Color Mode1Select Settings > System > Display > Color Mode.2Select an option.Customizing the Home ScreenYou can add items to and rearrange items on the Homescreen.1From the Home screen, select Menu.2Select an option:• To rearrange an item, select Rearrange, select theitem to move, and select the new location for it.• To add an item to the Home screen, select Add, andselect the new item to add.• To remove an item you have added to the Homescreen, select Remove, and select the item toremove.Introduction 1
Inserting Memory CardsYou can use optional memory cards in the chartplotter. Mapcards allow you to view high-resolution satellite imagery andaerial reference photos of ports, harbors, marinas, and otherpoints of interest. You can use blank memory cards totransfer data such as waypoints, routes, and tracks toanother compatible Garmin chartplotter or a computer.1Open the access door À on the front of the chartplotter.2Insert the memory card Á with the label facing to theright.3Press the card in until it clicks.4Close the door.Charts and 3D Chart ViewsThe chartplotters have a basic imagery map. The charts and3D chart views listed below are available on the chartplotter.The charts and views that are available depend on the mapdata and accessories used.You can access the charts and chart views by selectingCharts.Navigation Chart: Shows navigation data available on yourpre-loaded maps and from supplemental maps, ifavailable. The data includes buoys, lights, cables, depthsoundings, marinas, and tide stations in an overheadview.Perspective 3D: Provides a view from above and behind theboat (according to your course) and provides a visualnavigation aid. This view is helpful when navigating trickyshoals, reefs, bridges, or channels, and is beneficial whentrying to identify entry and exit routes in unfamiliarharbors or anchorages.Mariner’s Eye 3D: Shows a detailed, three-dimensional viewfrom above and behind the boat (according to yourcourse) and provides a visual navigation aid. This view ishelpful when navigating tricky shoals, reefs, bridges, orchannels, and when trying to identify entry and exit routesin unfamiliar harbors or anchorages.NOTE: Mariner's Eye 3D and Fish Eye 3D chart viewsare available with premium charts, in some areas.Fish Eye 3D: Provides an underwater view that visuallyrepresents the sea floor according to the chartinformation. When a sonar transducer is connected,suspended targets (such as fish) are indicated by red,green, and yellow spheres. Red indicates the largesttargets and green indicates the smallest.NOTE: Mariner's Eye 3D and Fish Eye 3D chart viewsare available with premium charts, in some areas.Fishing Chart: Provides a detailed view of the bottomcontours and depth soundings on the chart. This chartremoves navigational data from the chart, providesdetailed bathymetric data, and enhances bottom contoursfor depth recognition. This chart is best for offshore deep-sea fishing.NOTE: The offshore Fishing chart is available withpremium charts, in some areas.Radar Overlay: Superimposes radar information on theNavigation chart or the Fishing chart, when thechartplotter is connected to a radar. This feature is notavailable with all models.Navigation Chart and Offshore FishingChartNOTE: The offshore Fishing chart is available with premiumcharts, in some areas.The Navigation and Fishing charts allows you to plan yourcourse, view map information, and follow a route. The Fishingchart is for offshore fishing.To open the Navigation chart, select Charts > NavigationChart.To open the Fishing chart, select Charts > Fishing Chart.Zooming In and Out of the ChartThe zoom level is indicated by the scale number at thebottom of the chart. The bar under the scale numberrepresents that distance on the chart.•Select to zoom out.•Select to zoom in.Panning the ChartYou can move the chart to view an area other than yourpresent location.1From the chart, drag the navigation screen or use thearrow keys.2Select Stop Panning or Back to stop panning and returnthe screen to your present location.Selecting an Item on the Map Using the DeviceKeys1From a chart or 3D chart view, select , , , or tomove the cursor.2Select Select.Chart SymbolsThis table contains some of the common symbols you mightsee on the detailed charts.Icon DescriptionBuoyInformation2 Charts and 3D Chart Views
Icon DescriptionMarine servicesTide stationCurrent stationOverhead photo availablePerspective photo availableOther features common to most charts include depth contourlines (with deep water represented in white), intertidal zones,spot soundings (as depicted on the original paper chart),navigational aids and symbols, obstructions, and cable areas.Navigating to a Point on the Chart CAUTIONThe Auto Guidance feature is based on electronic chartinformation. That data does not ensure obstacle and bottomclearance. Carefully compare the course to all visualsightings, and avoid any land, shallow water, or otherobstacles that may be in your path.When using Go To, a direct course and a corrected coursemay pass over land or shallow water. Use visual sightings,and steer to avoid land, shallow water, and other dangerousobjects.NOTE: The offshore Fishing chart is available with premiumcharts, in some areas.NOTE: Auto Guidance is available with premium charts, insome areas.1From the Navigation chart or Fishing chart, select alocation.2If necessary, select Select.3Select Navigate To.4Select an option:• To navigate directly to the location, select Go To.• To create a route to the location, including turns,select Route To.• To use Auto Guidance, select Guide To.5Review the course indicated by the magenta line.NOTE: When using Auto Guidance, a gray segmentwithin any part of the magenta line indicates that AutoGuidance cannot calculate part of the Auto Guidance line.This is due to the settings for minimum safe water depthand minimum safe obstacle height.6Follow the magenta line, steering to avoid land, shallowwater, and other obstacles.Viewing Location and Object Information on aChartYou can view information about a location or an object on theNavigation chart or the Fishing chart.NOTE: The offshore Fishing chart is available with premiumcharts, in some areas.1From the Navigation chart or Fishing chart, select alocation or object.A list of options appears along the right side of the chart.The options that appear vary based on the location orobject you selected.2Select an option:• To view details of objects in the vicinity of the cursor,select Review.NOTE: Review does not appear if the cursor is notnear an object. If the cursor is near only one object,the name of the object appears.• To navigate to the selected location, select NavigateTo.• To mark a waypoint at the cursor location, selectCreate Waypoint.• To view the distance and bearing of the object fromyour current location, select Measure Distance.The distance and bearing appear on the screen.Select Set Reference to measure from a locationother than your current location.• To view tide, current, celestial, chart notes, or localservices information near the cursor, selectInformation.Viewing Details about NavaidsFrom the Navigation chart, Fishing chart, Perspective 3Dchart view, or Mariner’s Eye 3D chart view, you can viewdetails about various types of navigation aids, includingbeacons, lights, and obstructions.NOTE: The offshore Fishing chart is available with premiumcharts, in some areas.NOTE: Mariner's Eye 3D and Fish Eye 3D chart views areavailable with premium charts, in some areas.1From a chart or 3D chart view, select a navaid.2If necessary, select Review.3Select the name of the navaid.Premium Charts CAUTIONThe Auto Guidance feature is based on electronic chartinformation. That data does not ensure obstacle and bottomclearance. Carefully compare the course to all visualsightings, and avoid any land, shallow water, or otherobstacles that may be in your path.Optional premium charts, such as BlueChart® g2 Vision®,allow you to get the most out of your chartplotter. In additionto detailed marine charting, premium charts may containthese features, which are available in some areas.Mariner’s Eye 3D: Provides a view from above and behindthe boat for a three-dimensional navigation aid.Fish Eye 3D: Provides an underwater, three-dimensionalview that visually represents the sea floor according tothe information on the chart.Fishing Charts: Shows the chart with enhanced bottomcontours and without navigational data. This chart workswell for offshore deep-sea fishing.High Resolution Satellite Imagery: Provides high-resolutionsatellite images for a realistic view of the land and wateron the Navigation chart (page 4).Aerial Photos: Shows marinas and other navigationallysignificant aerial photos to help you visualize yoursurroundings (page 4).Detailed Roads and POI data: Shows detailed road andpoint of interest (POI) data, which includes highly detailedcoastal roads and POIs such as restaurants, lodging,local attractions.Charts and 3D Chart Views 3
Auto Guidance: Uses specified safe depth, safe height, andchart data to determine the best course to yourdestination. Auto Guidance is available when younavigate to a destination using Guide To.Viewing Tide Station InformationNOTE: Tide station icons are available with premium charts,in some areas. on the chart indicates a tide station. You can view adetailed graph for a tide station to help predict the tide levelat different times or on different days.NOTE: This feature is available with premium charts, in someareas.1From the Navigation chart or Fishing chart, select a tidestation.Tide direction À and tide level information Á appearnear .2Select an option to view additional station information:•Select the button with the station name Â.• If more than one item is in the vicinity, select Review,and select the button with the station name.Animated Tide and Current IndicatorsNOTE: This feature is available with premium charts, in someareas.You can view indicators for animated tide station and currentdirection on the Navigation chart or the Fishing chart. Youmust also enable animated icons in the chart settings(page 4).An indicator for a tide station appears on the chart as avertical bar graph with an arrow. A red arrow pointingdownward indicates a falling tide, and a blue arrow pointingupward indicates a rising tide. When you move the cursorover the tide station indicator, the height of the tide at thestation appears above the station indicator.Current direction indicators appear as arrows on the chart.The direction of each arrow indicates the direction of thecurrent at a specific location on the chart. The color of thecurrent arrow indicates the range of speed for the current atthat location. When you move the cursor over the currentdirection indicator, the specific current speed at the locationappears above the direction indicator.Color Current Speed RangeYellow 0 to 1 knotOrange 1 to 2 knotsRed 2 or more knotsShowing and Configuring Tides and CurrentsNOTE: This feature is available with premium charts, in someareas.You can show static or animated tide and current stationindicators on the Navigation chart or Fishing chart.1From the Navigation or Fishing chart, select Menu >Chart Setup > Tides & Currents.2Select an option:•To show current station indicators and tide stationindicators on the chart, select On.• To show animated tide station indicators andanimated current direction indicators on the chart,select Animated.Showing Satellite Imagery on the Navigation ChartNOTE: This feature is available with premium charts, in someareas.You can overlay high-resolution satellite images on the landor on both land and sea portions of the Navigation chart.NOTE: When enabled, high-resolution satellite images arepresent only at lower zoom levels. If you cannot see high-resolution images in your optional chart region, you canselect to zoom in. You also can set the detail level higherby changing the map zoom detail.1Select Charts > Navigation Chart > Menu > NavigationChart Setup > Photos.2Select an option:• Select Land Only to show standard chart informationon the water, with photos overlaying the land.• Select Photo Map Blend to show photos on both thewater and the land at a specified opacity. Use theslider bar to adjust the photo opacity. The higher youset the percentage, the more the satellite photoscover both land and water.Viewing Aerial Photos of LandmarksBefore you can view aerial photos on the Navigation chart,you must turn on the Photo setting in the chart setup.NOTE: This feature is available with premium charts, in someareas.You can use aerial photographs of landmarks, marinas, andharbors to help orient yourself to your surroundings or toacquaint yourself with a marina or a harbor prior to arrival.1From the Navigation chart, select a camera icon:• To view an overhead photo, select .• To view a perspective photo, select . The photowas taken from the location of the camera, pointed inthe direction of the cone.2Select Review > Aerial Photo.Automatic Identification SystemThe Automatic Identification System (AIS) enables you toidentify and track other vessels, and alerts you to area traffic.When connected to an external AIS device, the chartplottercan show some AIS information about other vessels that arewithin range, that are equipped with a transponder, and thatare actively transmitting AIS information. The informationreported for each vessel includes the Maritime MobileService Identity (MMSI), location, GPS speed, GPS heading,time that has elapsed since the last position of the vesselwas reported, nearest approach, and time to the nearestapproach.4 Charts and 3D Chart Views
AIS Targeting SymbolsSymbol DescriptionAIS vessel. The vessel is reporting AIS information. Thedirection in which the triangle is pointing indicates thedirection in which the AIS vessel is moving.Target is selected.Target is activated. The target appears larger on thechart. A green line attached to the target indicates theheading of the target. The MMSI, speed, and direction ofthe vessel appear beneath the target, if the details settinghas been set to Show. If the AIS transmission from thevessel is lost, a message banner appears.Target is lost. A green X indicates that the AIStransmission from the vessel is lost, and the chartplotterdisplays a message banner asking whether the vesselshould continue to be tracked. If you discontinue vesseltracking, the lost target symbol disappears from the chartor the 3D chart view.Dangerous target in range. The target flashes while analarm sounds and a message banner appears. After thealarm has been acknowledged, a solid red triangle with ared line attached to it indicates the location and theheading of the target. If the safe-zone collision alarm hasbeen set to Off, the target flashes, but the audible alarmdoes not sound and the alarm banner does not appear. Ifthe AIS transmission from the vessel is lost, a messagebanner appears.Dangerous target is lost. A red X indicates that the AIStransmission from the vessel is lost, and the chartplotterdisplays a message banner asking whether the vesselshould continue to be tracked. If you discontinue vesseltracking, the lost dangerous target symbol disappearsfrom the chart or the 3D chart view.The location of this symbol indicates the closest point ofapproach to a dangerous target, and the numbers nearthe symbol indicate the time to the closest point ofapproach to that target.Heading and Projected Course of Activated AISTargetsWhen heading and course over ground information areprovided by an activated AIS target, the heading of the targetappears on a chart as a solid line attached to the AIS targetsymbol. A heading line does not appear on a 3D chart view.The projected course of an activated AIS target appears as adashed line on a chart or a 3D chart view. The length of theprojected course line is based on the value of the projectedheading setting. If an activated AIS target is not transmittingspeed information, or if the vessel is not moving, a projectedcourse line does not appear. Changes in the speed, courseover ground, or rate of turn information transmitted by thevessel can impact the calculation of the projected course line.When course over ground, heading, and rate of turninformation are provided by an activated AIS target, theprojected course of the target is calculated based on thecourse over ground and the rate of turn information. Thedirection in which the target is turning, which is also based onthe rate of turn information, is indicated by the direction of thebarb at the end of the heading line. The length of the barbdoes not change.When course over ground and heading information areprovided by an activated AIS target, but rate of turninformation is not provided, the projected course of the targetis calculated based on the course over ground information.Showing AIS Vessels on a Chart or 3D Chart ViewBefore you can use AIS, you must connect the chartplotter toan external AIS device and receive active transpondersignals from other vessels.You can configure how other vessels appear on a chart or ona 3D chart view. The display range configured for one chartor one 3D chart view are applied only to that chart or to that3D chart view. The details, projected heading, and trailssettings configured for one chart or one 3D chart view areapplied to all charts and to all 3D chart views.1From a chart or 3D chart view, select Menu > OtherVessels > AIS Display Setup.2Select an option:• To indicate the distance from your location in whichAIS vessels appear, select Display Range, andselect a distance.• To show details about AIS-activated vessels, selectDetails > Show.• To set the projected heading time for AIS-activatedvessels, select Projected Heading, and enter thetime.• To show the tracks of AIS vessels, select Trails, andselect the length of the track that appears using atrail.Activating a Target for an AIS Vessel1From a chart or a 3D chart view, select an AIS vessel.2Select AIS Vessel > Activate Target.Viewing Information about a Targeted AIS VesselYou can view the AIS signal status, MMSI, GPS speed, GPSheading, and other information that is reported about atargeted AIS vessel.1From a chart or a 3D chart view, select an AIS vessel.2Select AIS Vessel.Deactivating a Target for an AIS Vessel1From a chart or a 3D chart view, select an AIS vessel.2Select AIS Vessel > Deactivate.Viewing a List of AIS ThreatsFrom a chart or 3D chart view, select Menu > OtherVessels > AIS List.Setting the Safe-Zone Collision AlarmBefore you can set a safe-zone collision alarm, you musthave a compatible chartplotter connected to an AIS device.The safe-zone collision alarm is used only with AIS. The safezone is used for collision avoidance, and can be customized.1Select Settings > Alarms > AIS > AIS Alarm > On.A message banner appears and an alarm sounds whenan AIS-activated vessel enters the safe-zone area aroundyour boat. The object is also labeled as dangerous on thescreen. When the alarm is off, the message banner andaudible alarm are disabled, but the object is still labeledas dangerous on the screen.2Select Range.3Select a distance for the safe-zone radius around yourvessel.Charts and 3D Chart Views 5
4Select Time To.5Select a time at which the alarm will sound if a target isdetermined to intersect the safe zone.For example, to be notified of a pending intersection 10minutes before it will likely occur, set Time To to 10, andthe alarm will sound 10 minutes before the vesselintersects the safe zone.AIS Distress SignalsSelf-contained AIS distress signal devices transmitemergency position reports when activated. The chartplottercan receive signals from Search and Rescue Transmitters(SART), Emergency Position Indicating Radio Beacons(EPIRB), and other man overboard signals. Distress signaltransmissions are different than standard AIS transmissions,so they appear differently on the chartplotter. Instead oftracking a distress signal transmission for collision avoidance,you track a distress signal transmission to locate and assist avessel or person.Navigating to a Distress Signal TransmissionWhen you receive a distress signal transmission, a distresssignal alarm appears.Select Review > Go To to begin navigation to thetransmission.AIS Distress Signal Device Targeting SymbolsSymbol DescriptionAIS distress signal device transmission. Select to seemore information about the transmission and beginnavigation.Transmission lost.Transmission test. Appears when a vessel initiates a testof their distress signal device, and does not represent atrue emergency.Transmission test lost.Enabling AIS Transmission Test AlertsTo avoid a large number of test alerts and symbols incrowded areas such as marinas, you can select to receive orignore AIS test messages. To test an AIS emergency device,you must enable the chartplotter to receive test alerts.1Select Settings > Alarms > AIS.2Select an option:• To receive or ignore Emergency Position IndicatingRadio Beacon (EPRIB) test signals, select AIS-EPIRBTest.• To receive or ignore Man Overboard (MOB) testsignals, select AIS-MOB Test.• To receive or ignore Search and Rescue Transponder(SART) test signals, select AIS-SART Test.Turning Off AIS ReceptionAIS signal reception is turned on by default.Select Settings > Other Vessels > AIS > Off.All AIS functionality on all charts and 3D chart views isdisabled. This includes AIS vessel targeting and tracking,collision alarms that result from AIS vessel targeting andtracking, and the display of information about AISvessels.Chart and 3D Chart View SettingsNOTE: Not all settings apply to all charts and 3D chart views.Some options require premium maps or connectedaccessories, such as radar.These settings apply to the charts and 3D chart views, exceptthe Radar overlay and Fish Eye 3D (page 8).From a chart or 3D chart view, select Menu.Waypoints & Tracks: See page 6.Other Vessels: See page 7.Surface Radar: Shows surface radar details on thePerspective 3D or Mariner's Eye 3D chart views.Weather Radar: Shows weather radar imaging on thePerspective 3D or Mariner's Eye 3D chart views.Navaids: Shows navigational aids on the Fishing chart.Chart Setup: See page 6.Overlay Numbers: See page 7. This might appear in theChart Setup menu.Chart Appearance: See page 7. This might appear in theChart Setup menu.Navigation and Fishing Chart SetupNOTE: Not all settings apply to all charts and 3D chart views.Some settings require external accessories or applicablepremium charts.From the Navigation chart or Fishing chart, select Menu >Chart Setup.Photos: Shows camera icons in some areas when usingsome premium charts. This enables you to view aerialphotos of landmarks (page 4).Tides & Currents: Shows current station indicators and tidestation indicators on the chart (page 4).Service Points: Shows locations where marine maintenanceand repair services may be obtained.Roses: Shows a compass rose around your boat, indicatingcompass direction oriented to the heading of the boat. Atrue wind direction or apparent wind direction indicatorappears if the chartplotter is connected to a compatiblemarine wind sensor.Weather: Sets which weather items are shown on the chart,if the chartplotter is connected to a compatible weatherreceiver with an active subscription.Lake Level: Allows you to enter the present level of the lake.Overlay Numbers: See page 7.Chart Appearance: See page 7.Waypoints and Tracks Settings on the Charts andChart ViewsFrom a chart, select Menu > Waypoints & Tracks.Tracks: Shows tracks on the chart or 3D chart view.Waypoints: Shows the Waypoints list (page 9).New Waypoint: Creates a new waypoint.Waypoint Display: Sets how to display waypoints on thechart or 3D chart view.Active Tracks: Shows the active track options menu.Saved Tracks: Shows the list of saved tracks (page 11).Tracks Display: Sets which tracks to display on the chart or3D chart view based on track color.6 Charts and 3D Chart Views
Overlay Numbers SettingsFrom a chart, 3D chart view, the Radar screen, or aCombinations screen, select Menu > Overlay Numbers.Edit Layout: Sets the layout of the data overlay, or datafields. You can select the data to be shown within eachdata field.Navigation Inset: Shows the navigation inset when thevessel is navigating to a destination.Navigation Inset Setup: Allows you to configure thenavigation inset to show Route Leg Details, and tocontrol when the inset appears before a turn ordestination.Compass Tape: Shows the compass tape data bar when thevessel is navigating to a destination.Editing the Data FieldsYou can change the data shown in the overlay numbersdisplayed on the charts, 3D chart views, Combinationscreens, Sonar screens, and Radar screens.1From a screen that supports overlay numbers, selectMenu > Overlay Numbers > Edit Layout.2If necessary, select Chart Setup.3Select Overlay Numbers > Edit Layout.4Select a layout.5Select a data field.6Select the type of data shown in the field.Available data options vary based on the chartplotter andnetwork configuration.Showing a Navigation InsetYou can control whether a navigation inset appears on somechart views. The navigation inset is shown only when theboat is navigating to a destination.1From a chart or 3D chart view, select Menu.2If necessary, select Chart Setup.3Select Overlay Numbers > Navigation Inset > Auto.4Select Navigation Inset Setup.5Complete an action:•To show waypoint velocity made good (VMG) whennavigating a route with more than one leg, selectRoute Leg Details > On.• To show next-turn data based on distance, selectNext Turn > Distance.• To show next-turn data based on time, select NextTurn > Time.• To indicate how the destination data appears, selectDestination, and select an option.Chart Appearance SettingsYou can adjust the appearance of the different chart views.Each setting is specific for the type of chart view that you arein.NOTE: Not all settings apply to all charts and 3D chart viewsand chartplotter models. Some options require premiummaps or connected accessories, such as radar.From a chart or 3D chart view, select Menu > Chart Setup >Chart Appearance.Orientation: Sets the perspective of the map.Detail: Adjusts the amount of detail shown on the map, atdifferent zoom levels, for the chart.Heading Line: Shows and adjusts the heading line, which isa line drawn on the map from the bow of the boat in thedirection of travel, and the data source for the headingline.World Map: Uses either a basic world map or a shaded reliefmap on the chart. These differences are visible only whenzoomed out too far to see the detailed charts.Spot Depths: Turns on spot soundings and sets adangerous depth. Spot depths that are equal to or moreshallow than the dangerous depth will be indicated by redtext.Safety Shading: Sets the appearance of depth shading.Depth Range Shading: Sets the appearance of depth rangeshading.Symbols: Shows and configures the appearance of varioussymbols on the chart, such as the vessel icon, navaidsymbols, land POIs, and light sectors.Style: Sets how the chart appears over 3D terrain.Hazard Colors: Shows shallow water and land with a colorscale. Blue indicates deep water, yellow is shallow water,and red is very shallow water.Safe Depth: Sets the appearance of a safe depth forMariner’s Eye 3D.NOTE: This setting affects only the appearance of hazardcolors in Mariner’s Eye 3D. It does not affect the safewater depth Auto Guidance setting or the sonar shallowwater alarm setting.Range Rings: Shows and configures the appearance ofrange rings, which help you to visualize distances insome chart views.Lane Width: Specifies the width of the navigation lane, whichis the magenta line in some chart views that indicates thecourse to your destination.Other Vessels Settings on the Charts and ChartViewsNOTE: These options require connected accessories, suchas an AIS receiver or VHF radio.From a chart or 3D chart view, select Menu > OtherVessels.AIS List: Shows the AIS list (page 5).DSC List: Shows the DSC list (page 20).AIS Display Setup: See page 7.DSC Trails: Shows the tracks of DSC vessels, and selectsthe length of the track that appears using a trail.AIS Alarm: Sets the safe-zone collision alarm (page 5).AIS Display SettingsNOTE: AIS requires the use of an external AIS device andactive transponder signals from other vessels.From a chart or 3D chart view, select Menu > Other Vessels> AIS Display Setup.AIS Display Range: Indicates the distance from yourlocation within which AIS vessels appear.Details: Shows details about AIS-activated vessels.Projected Heading: Sets the projected heading time for AIS-activated vessels.Trails: Shows the tracks of AIS vessels, and select the lengthof the track that appears using a trail.Charts and 3D Chart Views 7
Fish Eye 3D SettingsNOTE: This feature is available with premium charts, in someareas.From the Fish Eye 3D chart view, select Menu.View: Sets the perspective of the 3D chart view.Tracks: Shows tracks.Sonar Cone: Shows a cone that indicates the area coveredby the transducer.Fish Symbols: Shows suspended targets.Navigation with a Chartplotter CAUTIONThe Auto Guidance feature is based on electronic chartinformation. That data does not ensure obstacle and bottomclearance. Carefully compare the course to all visualsightings, and avoid any land, shallow water, or otherobstacles that may be in your path.To navigate, you must choose a destination, set a course orcreate a route, and follow the course or route. You can followthe course or the route on the Navigation chart, Fishing chart,Perspective 3D chart view, or Mariner’s Eye 3D chart view.NOTE: Auto Guidance is available with premium charts, insome areas.NOTE: Mariner's Eye 3D and Fish Eye 3D chart views areavailable with premium charts, in some areas.NOTE: The offshore Fishing chart is available with premiumcharts, in some areas.Basic Navigation QuestionsQuestion AnswerHow do I make the chartplotterpoint me in the direction in which Iwant to go (bearing)?Navigate using Go To. See page 9.How do I make the device guide mealong a straight line (minimizingcross track) to a location using theshortest distance from the presentlocation?Build a single-leg route andnavigate it using Route To.See page 10.How do I make the device guide meto a location while avoiding chartedobstacles?Build a multi-leg route andnavigate it using Route To.See page 10.How do I make the device steer myautomatic pilot?Navigate using Route To. See page 10.Can the device create a path forme?If you have premium mapsthat support Auto Guidanceand are in an area covered byAuto Guidance, navigateusing Auto Guidance. See page 9.How do I change the AutoGuidance settings for my boat?See page 28.DestinationsYou can select destinations using various charts and 3Dchart views or using the lists.Searching for a Destination by NameYou can search for saved waypoints, saved routes, savedtracks, and marine services destinations by name.1Select Nav Info > Search by Name.2Enter at least a portion of the name of your destination.3If necessary, select Done.The 50 nearest destinations that contain your searchcriteria appear.4Select the location.Selecting a Destination Using the Navigation ChartFrom the Navigation chart, select a destination.Searching for a Destination Using Nav Info1Select Nav Info.•To view a list of preloaded locations and previouslymarked locations, select Waypoints.• To view a list of previously saved routes, selectRoutes.• To view a list of recorded tracks, select Tracks.• To view a list of marinas and other offshore points ofinterest, select Offshore Services.• To view a list of marinas and other inland points ofinterest, select Inland Services.• To search for a destination by name, select Searchby Name.2Select a destination.Searching for a Marine Services DestinationNOTE: This feature is available with premium charts, in someareas.The chartplotter contains information for thousands ofdestinations offering marine services.1Select Nav Info.2Select Offshore Services or Inland Services.3If necessary, select the marine service category.The chartplotter shows a list of the nearest locations andthe distance and bearing to each.4Select a destination.You can select or to view additional information or toshow the location on a chart.Courses CAUTIONThe Auto Guidance feature is based on electronic chartinformation. That data does not ensure obstacle and bottomclearance. Carefully compare the course to all visualsightings, and avoid any land, shallow water, or otherobstacles that may be in your path.When using Go To, a direct course and a corrected coursemay pass over land or shallow water. Use visual sightings,and steer to avoid land, shallow water, and other dangerousobjects.NOTE: Auto Guidance is available with premium charts, insome areas.You can set and follow a course to a destination using one ofthree methods: Go To, Route To, or Guide To.Go To: Takes you directly to the destination.Route To: Creates a route from your location to adestination, allowing you to add turns along the way.Guide To: Create a path to a destination using AutoGuidance.8 Navigation with a Chartplotter
Setting and Following a Direct Course Using Go To CAUTIONWhen using Go To, a direct course and a corrected coursemay pass over land or shallow water. Use visual sightings,and steer to avoid land, shallow water, and other dangerousobjects.You can set and follow a direct course from your currentlocation to a selected destination.1Select a destination (page 8).2Select Navigate To > Go To.A magenta line appears. In the center of the magenta lineis a thinner purple line that represents the correctedcourse from your current location to the destination. Thecorrected course is dynamic, and it moves with your boatwhen you are off course.3Follow the magenta line, steering to avoid land, shallowwater, and other obstacles.4If you are off course, follow the purple line (correctedcourse) to go to your destination, or steer back to themagenta line (direct course).Setting and Following a Course Using AutoGuidance CAUTIONThe Auto Guidance feature is based on electronic chartinformation. That data does not ensure obstacle and bottomclearance. Carefully compare the course to all visualsightings, and avoid any land, shallow water, or otherobstacles that may be in your path.NOTE: Auto Guidance is available with premium charts, insome areas.1Select a destination (page 8).2Select Navigate To > Guide To.3Review the course indicated by the magenta AutoGuidance line.4Follow the magenta line, steering to avoid land, shallowwater, and other obstacles.NOTE: When using Auto Guidance, a gray segmentwithin any part of the magenta line indicates that AutoGuidance cannot calculate part of the Auto Guidance line.This is due to the settings for minimum safe water depthand minimum safe obstacle height.Autopilot NavigationWhen you start navigation (Go To, Route To, or Guide To), ifyou are connected through a NMEA 2000® network to acompatible Garmin® autopilot, you are prompted to engagethe autopilot.Stopping NavigationFrom the Navigation chart or Fishing chart, select Menu >Stop Navigation.WaypointsWaypoints are locations you record and store in the device.Marking Your Present Location as a WaypointFrom any screen, select Mark.Creating a Waypoint at a Different Location1Select Nav Info > Waypoints > Create Waypoint.2Select an option:•To create the waypoint by entering positioncoordinates, select Enter Coordinates, and enter thecoordinates.• To create the waypoint using a chart, select UseChart, select the location, and select MoveWaypoint.Marking and Navigating to an MOB LocationWhen you mark a waypoint, you can designate it as a manoverboard (MOB) location.Select an option:• From any screen, select Mark > Man Overboard >Yes.• From the Home screen, select Man Overboard >Yes.An international MOB symbol marks the active MOB pointand the chartplotter sets a direct course back to the markedlocation.Viewing a List of all WaypointsSelect Nav Info > Waypoints.Editing a Saved Waypoint1Select Nav Info > Waypoints.2Select a waypoint.3Select Edit Waypoint.4Select an option:• To add a name, select Name, and enter a name.• To change the symbol, select Symbol.• To change the depth, select Depth.• To change the water temperature, select WaterTemp..• To change the comment, select Comment.• To move the position of the waypoint, select Position.Moving a Saved Waypoint1Select Nav Info > Waypoints.2Select a waypoint.3Select Edit Waypoint > Position.4Indicate a new location for the waypoint:• To move the waypoint while viewing a chart, selectUse Chart, select a new location on the chart, andselect Move Waypoint.• To move the waypoint using coordinates, select EnterCoordinates, and enter the new coordinates.Browsing for and Navigating to a Saved Waypoint CAUTIONThe Auto Guidance feature is based on electronic chartinformation. That data does not ensure obstacle and bottomclearance. Carefully compare the course to all visualsightings, and avoid any land, shallow water, or otherobstacles that may be in your path.When using Go To, a direct course and a corrected coursemay pass over land or shallow water. Use visual sightings,and steer to avoid land, shallow water, and other dangerousobjects.Navigation with a Chartplotter 9
NOTE: Auto Guidance is available with premium charts, insome areas.You must create a waypoint before you can navigate to awaypoint.1Select Nav Info > Waypoints.2Select a waypoint.3Select Navigate To.4Select an option:• To navigate directly to the location, select Go To.• To create a route to the location, including turns,select Route To.• To use Auto Guidance, select Guide To.5Review the course indicated by the magenta line.NOTE: When using Auto Guidance, a gray segmentwithin any part of the magenta line indicates that AutoGuidance cannot calculate part of the Auto Guidance line.This is due to the settings for minimum safe water depthand minimum safe obstacle height.6Follow the magenta line, steering to avoid land, shallowwater, and other obstacles.Deleting a Waypoint or an MOB1Select Nav Info > Waypoints.2Select a waypoint or an MOB.3Select Delete.Deleting All WaypointsSelect Nav Info > Manage Data > Clear User Data >Waypoints > All.RoutesCreating and Navigating a Route From YourPresent LocationYou can create and immediately navigate a route on theNavigation chart or the Fishing chart. This procedure doesnot save the route or the waypoint data.NOTE: The offshore Fishing chart is available with premiumcharts, in some areas.1From the Navigation chart or Fishing chart, select adestination.2Select Navigate To > Route To.3Select the location of the last turn before the destination.4Select Add Turn.5If necessary, repeat step 3 and 4 to add additional turns,working backward from the destination to the presentlocation of your vessel.The last turn you add should be the first turn you make,starting from your present location. It should be the turnclosest to your vessel.6If necessary, select Menu.7Select Navigate Route.8Review the course indicated by the magenta line.9Follow the magenta line, steering to avoid land, shallowwater, and other obstacles.Creating and Saving a RouteThis procedure saves the route and all the waypoints in it.The starting point can be your present location or anotherlocation.1Select Nav Info > Routes > New Route > Use Chart.2Select the starting location of the route.3Select Add Turn.4Select the location of the next turn on the chart.5Select Add Turn.The chartplotter marks the location of the turn with awaypoint.6If necessary, repeat steps 4 and 5 to add more turns.7Select the final destination.Viewing a List of RoutesSelect Nav Info > Routes.Editing a Saved RouteYou can change the name of a route, or change the turns theroute contains.1Select Nav Info > Routes.2Select a route.3Select Edit Route.4Select an option:•To change the name, select Name, and enter thename.• To select a waypoint from the turn list, select EditTurns > Use Turn List, and select a waypoint fromthe list.Browsing for and Navigating a Saved RouteBefore you can browse a list of routes and navigate to one ofthem, you must create and save at least one route.1Select Nav Info > Routes.2Select a route.3Select Navigate To.4Select an option:• To navigate the route from the starting point usedwhen the route was created, select Forward• To navigate the route from the destination point usedwhen the route was created, select Backward.A magenta line appears. In the center of the magenta lineis a thinner purple line that represents the correctedcourse from your present location to the destination. Thecorrected course is dynamic, and it moves with your boatwhen you are off course.5Review the course indicated by the magenta line.6Follow the magenta line along each leg in the route,steering to avoid land, shallow water, and otherobstacles.7If you are off course, follow the purple line (correctedcourse) to go to your destination, or steer back to themagenta line (direct course).Browsing for and Navigating Parallel to a SavedRouteBefore you can browse a list of routes and navigate to one ofthem, you must create and save at least one route.1Select Nav Info > Routes.2Select a route.3Select Navigate To.4Select Offset to navigate parallel to the route, offset fromit by a specific distance.10 Navigation with a Chartplotter
5Indicate how to navigate the route:•To navigate the route from the starting point usedwhen the route was created, to the left of the originalroute, select Forward – Port.• To navigate the route from the starting point usedwhen the route was created, to the right of the originalroute, select Forward – Starboard.• To navigate the route from the destination point usedwhen the route was created, to the left of the originalroute, select Backward – Port.• To navigate the route from the destination point usedwhen the route was created, to the right of the originalroute, select Backward – Starboard.6If necessary, select Done.A magenta line appears. In the center of the magenta lineis a thinner purple line that represents the correctedcourse from your present location to the destination. Thecorrected course is dynamic, and it moves with your boatwhen you are off course.7Review the course indicated by the magenta line.8Follow the magenta line along each leg in the route,steering to avoid land, shallow water, and otherobstacles.9If you are off course, follow the purple line (correctedcourse) to go to your destination, or steer back to themagenta line (direct course).Deleting a Saved Route1Select Nav Info > Routes.2Select a route.3Select Delete.Deleting All Saved RoutesSelect Nav Info > Clear User Data > Routes.TracksA track is a recording of the path of your boat. The trackcurrently being recorded is called the active track, and it canbe saved. You can show tracks in each chart or 3D chartview.Showing TracksFrom any chart or a 3D chart view, select Menu >Waypoints & Tracks > Tracks > On.A trailing line on the chart indicates your track.Setting the Color of the Active Track1Select Nav Info > Tracks > Active Track Options >Track Color.2Select a track color.Saving the Active TrackThe track currently being recorded is called the active track.1Select Nav Info > Tracks > Save Active Track.2Select an option:• Select the time the active track began.• Select Entire Log.3Select Save.Viewing a List of Saved TracksSelect Nav Info > Tracks > Saved Tracks.Editing a Saved Track1Select Nav Info > Tracks > Saved Tracks.2Select a track.3Select Edit Track.4Select an option:• Select Name, and enter the new name.• Select Track Color, and select a color.Saving a Track as a Route1Select Nav Info > Tracks > Saved Tracks.2Select a track.3Select Edit Track > Save Route.Browsing for and Navigating a Recorded TrackBefore you can browse a list of tracks and navigate to them,you must record and save at least one track (page 11).1Select Nav Info > Tracks.2Select a track.3Select Follow Track.4Select an option:• To navigate the track from the starting point usedwhen the track was created, select Forward.• To navigate the track from the destination point usedwhen the track was created, select Backward.5Review the course indicated by the colored line.6Follow the line along each leg in the route, steering toavoid land, shallow water, and other obstacles.Deleting a Saved Track1Select Nav Info > Tracks > Saved Tracks.2Select a track.3Select Delete.Deleting All Saved TracksSelect Nav Info > Manage Data > Clear User Data >Saved Tracks.Retracing the Active TrackThe track currently being recorded is called the active track.1Select Nav Info > Tracks > Follow Active Track.2Select an option:• Select the time the active track began.• Select Entire Log.3Review the course indicated by the colored line.4Follow the colored line, steering to avoid land, shallowwater, and other obstacles.Clearing the Active TrackSelect Nav Info > Tracks > Clear Active Track.The track memory is cleared, and the active trackcontinues to be recorded.Managing the Track Log Memory During Recording1Select Nav Info > Tracks > Active Track Options.2Select Record Mode.3Select an option:• To record a track log until the track memory is full,select Fill.Navigation with a Chartplotter 11
• To continuously record a track log, replacing theoldest track data with new data, select Wrap.Configuring the Recording Interval of the TrackLogYou can indicate the frequency at which the track plot isrecorded. Recording more frequent plots is more accuratebut fills the track log faster. The resolution interval isrecommended for the most efficient use of memory.1Select Nav Info > Tracks > Active Track Options >Record Interval > Interval.2Select an option:• To record the track based on a distance betweenpoints, select Distance > Change, and enter thedistance.• To record the track based on a time interval, selectTime > Change, and enter the time interval.• To record the track plot based on a variance fromyour course, select Resolution > Change, and enterthe maximum error allowed from the true coursebefore recording a track point.Deleting All Saved Waypoints, Routes, andTracksSelect Nav Info > Manage Data > Clear User Data > All> OK.CombinationsThe Combination screen shows a combination of differentscreens at the same time. The number of options availableon the Combination screen depends on the optional devicesyou have connected to your chartplotter and whether you areusing premium maps.Selecting a Combination1Select Combinations.2Select a combination.Customizing the Combinations Screen1Select Combinations.2Select a combination.3Select Menu.4Select an option:• To change the name, select Name, and enter a newname.• To customize the data shown on the screen, selectOverlay Numbers (page 7).Gauges and Almanac InformationGauges provide various information about the trip, engine,environment, and wind, and are available on all chartplottermodels. Numbers, Compass, and Trip gauges are availableon all chartplotters. Wind and Environment gauges requirevalid wind data from the NMEA® 0183 or NMEA 2000network. Engine gauges require a connection to the NMEA2000 network, so they are not available on all chartplottermodels.The chartplotters also provide almanac information abouttides, currents, and the sun and moon, such as rise and settimes.Viewing the CompassYou can view information about your bearing, heading, androute using the compass.Select Gauges > Compass.Viewing Trip GaugesTrip gauges show information for odometer, speed, time, andfuel for your present trip.Select Gauges > Trip.Resetting Trip Gauges1Select Gauges > Trip > Menu.2Select an option:• To set all the readings for the present trip to zero,select Reset Trip.• To set the maximum speed reading to zero, selectReset Maximum Speed.• To set the odometer reading to zero, select ResetOdometer.• To set all the readings to zero, select Reset All.Viewing Engine and Fuel GaugesBefore you can view engine and fuel gauges, you must beconnected to a NMEA 2000 network capable of sensingengine and fuel data. See the installation instructions fordetails.Select Gauges > Engine.Customizing Engine Gauge and Fuel Gauge LimitsYou can configure the upper and lower limits and the rangeof desired standard operation of a gauge. When a valueexceeds the range of standard operation, the gaugebecomes red.NOTE: Not all options are available for all gauges.1Select Gauges > Engine > Menu > Gauge Setup > SetGauge Limits.2Select a gauge.3Select Gauge Limits > Custom > Edit Limits.4Select an option:• To set the minimum value of the standard operatingrange, select Rated Min..• To set the maximum value of the standard operatingrange, select Rated Max..• To set the lower limit of the gauge lower than therated minimum, select Scale Min..• To set the upper limit of the gauge higher than therated maximum, select Scale Max..5Select the limit value.6Repeat steps 4 and 5 to set additional gauge limits.Enabling Status Alarms for Engine GaugesYou can enable the chartplotter to display engine statusalarms.Select Gauges > Engine > Menu > Gauge Setup >Status Alarms > On.12 Combinations
When an engine alarms occurs, a gauge status alarmmessage appears and the gauge may become reddepending on the type of alarm.Enabling Some Engine Gauge Status Alarms1Select Gauges > Engine > Menu > Gauge Setup >Status Alarms > Custom.2Select one or more engine gauge alarms to turn on or off.Selecting the Number of Engines Shown in GaugesYou can show information for up to four engines.1Select Gauges > Engine > Menu > Gauge Setup >Engine Selection > Number of Engines.2Select an option:• Select the number of engines.• Select Auto Configure to automatically detect thenumber of engines.Customizing the Engines Shown in GaugesBefore you can customize how the engines are shown in thegauges, you must manually select the number of engines(page 13).1Select Gauges > Engine > Menu > Gauge Setup >Engine Selection > Edit Engines.2Select First Engine.3Select the engine to display in the first gauge.4Repeat steps 2 and 3 for the remaining engine bars.Configuring the Fuel Gauges DisplayBefore you can configure and display the fuel levels, acompatible fuel flow sensor or tank level sensors must beconnected to the NMEA 2000 network.You can display the total amount of fuel on-board either as anumeric display that shows the total fuel or as a graphicdisplay that shows the level in each fuel tank.1Select Gauges > Engine > Menu > Gauge Setup > FuelDisplay.2Select an option:• To display a numeric value for the total fuel level in alltanks, select Use Total Fuel Onboard.• To display a graphical representation of the amount offuel in each tank, select Use Fuel Tank Levels.Setting the Fuel Capacity of the Vessel1Select Settings > My Vessel > Fuel Capacity.2Enter the combined total capacity of the fuel tanks.Synchronizing the Fuel Data with the Actual VesselFuelYou can synchronize the fuel levels in the chartplotter withthe actual fuel in the vessel when you add fuel to your vessel.1Select Gauges > Engine > Menu.2Select an option:• After you have filled up all the fuel tanks on thevessel, select Fill Up All Tanks. The fuel level isreset to maximum capacity.• After you have added less than a full tank of fuel,select Add Fuel to Boat, and enter the amountadded.• To specify the total fuel in the vessel tanks, select SetTotal Fuel Onboard, and enter the total amount offuel in the tanks.Setting the Fuel AlarmBefore you can set a fuel level alarm, a compatible fuel flowsensor must be connected to the NMEA 2000 network.You can set an alarm to sound when the total amount ofremaining onboard fuel reaches the level you specify.1Select Settings > Alarms > Fuel > Fuel Alarm > On.2Enter the remaining amount of fuel that triggers the alarm.Viewing the Wind GaugesBefore you can view wind information, you must have a windsensor connected to the chartplotter.Select Gauges > Wind.Configuring the Speed SourceYou can specify whether the vessel speed data displayed onthe gauge and used for wind calculations is based on waterspeed or GPS speed.1Select Gauges > Wind > Menu > Speed Display.2Select an option:• To calculate the vessel speed based on data from thewater-speed sensor, select Water Speed.• To calculate the vessel speed based on GPS data,select GPS Speed.Configuring the Heading Source of the Wind GaugeYou can specify the source of the heading displayed on thewind gauge. Magnetic heading is the heading data receivedfrom a heading sensor, and GPS heading is calculated byyour chartplotter GPS (course over ground).1Select Gauges > Wind > Menu > Heading Source.2Select GPS Hdg or Magnetic.Selecting the Range of the Close-Hauled WindGaugeYou can specify the range of the close-hauled wind gauge forboth the upwind scale and the downwind scale.1Select Gauges > Wind > Menu.2Select an option:• To set the maximum and minimum values that appearwhen the upwind close-hauled wind gauge appears,select Change Upwind Scale, and set the angles.• To set the maximum and minimum values that appearwhen the downwind close-hauled wind gaugeappears, select Change Downwind Scale, and setthe angles.Viewing the Environment GaugesSelect Gauges > Environment.Configuring the Alignment of the Wind GaugeYou can specify the alignment of the wind gauge on theenvironment gauges.1Select Gauges > Environment > Menu > Alignment.2Select an option:• To set the top of the wind gauge to a North heading,select North Up.• To rotate the gauge so the direction in which you aremoving is at the top, select Head Up.Gauges and Almanac Information 13
Configuring the Heading Source of theEnvironment GaugeYou can specify the source of the heading displayed on theenvironment gauge. Magnetic heading is the heading datareceived from a heading sensor, and GPS heading iscalculated by your chartplotter GPS (course over ground).1Select Gauges > Environment > Menu > HeadingSource.2Select GPS Hdg or Magnetic.Setting the Barometer Reference TimeYou can specify the reference time used to calculate thebarometer trend. The trend is indicated in the barometer field.1Select Gauges > Environment > Menu > PressureReference Time.2Select an option.Tide, Current, and Celestial InformationTide Station InformationYou can view information about a tide station for a specificdate and time, including the tide height, and when the nexthigh and low tides will occur. By default, the chartplottershows tide information for the most recently viewed tidestation and for the present date and time.Select Nav Info > Tides & Currents > Tides.Current Station InformationNOTE: Current station information is available with certaindetailed maps.You can view information about a current station for aspecific date and time, including the current speed and levelof the current. By default, the chartplotter shows currentinformation for the most recently viewed current station andfor the present date and time.Select Nav Info > Tides & Currents > Currents.Celestial InformationYou can view information about sunrise, sunset, moonrise,moonset, moon phase, and the approximate sky viewlocation of the sun and moon. The center of the screenrepresents the sky overhead, and the outermost ringsrepresent the horizon. By default, the chartplotter showscelestial information for the present date and time.Select Nav Info > Tides & Currents > Celestial.Viewing Tide Station, Current Station, or CelestialInformation for a Different Date1Select Nav Info > Tides & Currents.2Select Tides, Currents, or Celestial.3Select an option.•To view information for a different date, selectChange Date > Manual, and enter a date.• To view information for today, select Change Date >Current.• If available, to view information for the day after thedate shown, select Next Day.• If available, to view information for the day before thedate shown, select Previous Day.Viewing Information for a Different Tide or CurrentStation1Select Nav Info > Tides & Currents.2Select Tides or Currents.3Select Nearby Stations.4Select a station.Viewing Almanac Information from the NavigationChart1Select Charts > Navigation Chart.2Select an area on the map.3Select Information.4Select Tides, Currents, or Celestial.SonarWhen properly connected to an optional Garmin soundermodule and a transducer, your compatible chartplotter can beused as a fishfinder. There are three different sonar views tohelp you view the fish in the area: a full-screen view, a split-zoom view, and a split frequency view.Full-Screen Sonar ViewThe full-screen sonar view shows a large image of the sonarreadings from a transducer. The range scale along the rightside of the screen shows the depth of detected objects as thescreen scrolls from the right to the left.Select Sonar > Full Screen.ÀRange adjustment controlsÁPosition informationÂSuspended targets or fishÃBottom of the body of waterÄRange or depth of the waterÅTransducer frequencySplit-Zoom Sonar ViewThe split-zoom sonar view shows a full-view graph of sonarreadings, and a magnified portion of that graph, on the samescreen.Select Sonar > Split Zoom.Split-Frequency Sonar ViewIn the split-frequency sonar view, one side of the screenshows a full-view graph of high frequency sonar data, and theother side of the screen shows a full-view graph of lowerfrequency sonar data.NOTE: The split-frequency sonar view requires the use of adual-frequency transducer.Select Sonar > Split Frequency.14 Sonar
Pausing the Sonar DisplayFrom a Sonar view, select Menu > Pause Sonar.Creating a Waypoint on the Sonar Screen1From a Sonar view, select Menu > Pause Sonar.2Select the location of the waypoint.3Select Mark or New Waypoint.Adjusting the Gain on the Sonar ScreenYou can control the sensitivity of the sonar receiver. To seemore detail, increase the gain. If the screen is cluttered,decrease the gain.1From a Sonar view, select Menu > Gain.2Select an option:• To increase or decrease the gain manually, select Upor Down.• To allow the chartplotter to adjust the gainautomatically, select an automatic option.Adjusting the Range of the Depth ScaleYou can adjust the range of the depth scale that appears onthe right side of the screen.1From a Sonar view, select Menu > Range.2Select an option:• To allow the chartplotter to adjust the depth scaleautomatically, select Auto.• To increase or decrease the range of the depth scalemanually, select Up or Down.TIP: From the sonar screen, you can select or to manually adjust the range of the depth scale.Setting the Zoom Level on the SonarScreen1From a Sonar view, select Menu > Zoom.2Select an option:• To zoom in on the sonar data from the bottom depth,select Bottom Lock.• To set the depth range of the magnified areamanually, select Set Zoom, select View Up or ViewDown to set the depth range of the magnified area,and select Zoom In or Zoom Out to increase ordecrease the magnification of the magnified area.• To set the depth and zoom automatically, select SetZoom > Auto.Selecting FrequenciesYou can indicate which frequencies appear on the sonarscreen when using a dual frequency transducer.1From a Sonar view, select Menu > Frequency.2Select an option:• To sweep each pulse through a range of frequenciesto deliver shallow-water-like target separation atextremely deep depths and at low frequencies, selectChirp. This is useful mainly for very deep, offshorewaters and when targeting some species of fish.• To show data from a 200 kHz sonar signal, select 200kHz. This is useful mainly for more-shallow, inlandwaters.• To show data from an 77 kHz sonar signal, select 77kHz. This is useful mainly for deeper waters and tosee better fish arches in shallow water..• To select a specific frequency, select Add, and enterthe frequency.Turning On the A-ScopeThe a-scope is a vertical flasher along the right side of thefull-screen sonar view. This feature expands the mostrecently received sonar data so that it is easier to see. It canalso be helpful for detecting fish that are close to the bottom.From a Sonar view, select Menu > Sonar Setup >Appearance > A-Scope.Sonar SetupSonar SettingsFrom a Sonar view, select Menu > Sonar Setup.Depth Line: Shows a quick-reference depth line.Scroll Speed: Sets the rate at which the sonar scrolls fromright to left.On-screen Control: Sets the control on the sonar screen tocontrol the gain or range. This is available fortouchscreen devices.Appearance: See page 15.Overlay Numbers: See page 7.Advanced: See page 15.Sonar Appearance SettingsFrom a Sonar view, select Menu > Sonar Setup >Appearance.Color Scheme: Sets the color scheme.Whiteline: Highlights the strongest signal from the bottom tohelp define the hardness or softness of the signal.A-Scope: Displays a vertical flasher along the right side ofthe screen that shows instantaneously the range totargets along a scale.Pic. Advance: Allows the sonar picture to advance faster bydrawing more than one column of data on the screen foreach column of sounder data received. This is especiallyhelpful when you are using the sounder in deep water,because the sonar signal takes longer to travel to thewater bottom and back to the transducer.The 1/1 setting draws one column of information on thescreen per sounder return. The 2/1 setting draws twocolumns of information on the screen per sounder return,and so on for the 4/1 and 8/1 settings.Fish Symbols: Sets how the sonar interprets suspendedtargets.Advanced Sonar SettingsFrom a Sonar view, select Menu > Sonar Setup >Advanced.Interference: Adjusts the sensitivity to reduce the effects ofinterference from nearby sources of noise.Surface Noise: Hides surface noise to help reduce clutter.Color Gain: Adjusts the color of sonar returns.Sonar Alarm SettingsNOTE: Some settings require external accessories.Select Settings > Alarms > Sonar.Sonar 15
Shallow Water: Sets an alarm to sound when the depth isless than the specified value.Deep Water: Sets an alarm to sound when the depth isgreater than the specified value.Water Temp.: Sets an alarm to sound when the transducerreports a temperature that is 2°F (1.1°C) above or belowthe specified temperature.Recording the Sonar DisplayNOTE: Not all models support sonar recording.1Insert a memory card into the card slot.2From a Sonar view, select Menu > Record Sonar.Stopping the Sonar RecordingBefore you can stop recording the sonar, you must beginrecording it (page 16).From a sonar view, select Menu > Stop Recording.Depth and Water Temperature GraphsIf you are using a depth-capable transducer, or are receivingwater depth information over NMEA 0183 or NMEA 2000,you can view a graphic log of depth readings over time. If youare using a temperature-capable transducer, or are receivingwater temperature information over NMEA 0183 or NMEA2000, you can view a graphic log of temperature readingsover time.The graphs scroll to the left as information is received.Select Sonar > Data Graphs.Setting the Depth and Water Temperature GraphRange and Time ScalesYou can indicate the amount of time and the range of depththat appear in the depth and water temperature graphs.1Select Sonar > Data Graphs > Menu.2Select Depth Graph Settings or Temperature GraphSettings.3Select an option:• To set a time-elapsed scale, select Duration. Thedefault setting is 10 minutes. Increasing the time-elapsed scale allows you to view variations over alonger period of time. Decreasing the time-elapsedscale allows you to view more detail over a shorterperiod of time.• To set the depth-range or temperature-range scale,select Scale. Increasing the scale allows you to viewmore variation in readings. Decreasing the scaleallows you to view more detail in the variation.Radar WARNINGThe marine radar transmits microwave energy that has thepotential to be harmful to humans and animals. Beforebeginning radar transmission, verify that the area around theradar is clear. The radar transmits a beam approximately 12°above and below a line extending horizontally from the centerof the radar. Avoid looking directly at the radar, because theeyes are the most susceptible parts of the body.NOTE: Not all models support radar.When you connect your compatible chartplotter to an optionalGarmin marine radar, such as a GMR™ 1206 xHD or a GMR24 HD, you can view more information about yoursurroundings.The GMR transmits a narrow beam of microwave energy as itrotates to a 360° pattern. When the transmitted energycontacts a target, some of that energy is reflected back to theradar.Radar Display ModesNOTE: Not all modes are available with all radar devices andall chartplotters.Select Radar, and select a mode.Cruising Mode: Shows a full-screen image of the gatheredradar information.Harbor Mode: Intended for use in inland waters, this modeworks best with short-range signals (2 nm or less).Offshore Mode: Intended for use in open waters, this modeworks best with long-range signals.Sentry Mode: Allows you to put the radar into timed-transmitmode, in which you can configure a radar transmit andstandby cycle to conserve power. You can also enable aguard zone in this mode, which identifies a safe zonearound your boat. If you switch from Sentry mode toanother mode, the radar switches to full-time transmissionand disables all guard zones.Radar Overlay Mode: Shows a full-screen image of thegathered radar information on top of the Navigation chart.The Radar overlay displays data based on the most-recently used radar mode.Transmitting Radar SignalsNOTE: As a safety feature, the radar enters standby modeafter it warms up. This gives you an opportunity to verify thearea around the radar is clear before beginning radartransmission.1With the chartplotter off, connect your radar as describedin the radar installation instructions.2Turn on the chartplotter.The radar warms up and a countdown alerts you whenthe radar is ready.3Select Radar.4Select a radar mode.A countdown message appears while the radar is startingup.5Select Menu > Transmit Radar.Adjusting the Zoom Scale on the RadarScreenThe radar zoom scale, also called the radar signal range,represents the distance from your position (the center) to theoutermost ring.From a Radar screen, select or .Each ring represents an even division of the zoom scale.For example, if the zoom scale is set at 3 miles, each ringrepresents 1 mile from the center out.Tips for Selecting a Radar Zoom ScaleThe radar zoom scale, or radar signal range, indicates thelength of the pulsed signal transmitted and received by the16 Radar
radar. As the range increases, the radar transmits longerpulses in order to reach distant targets. Closer targets,especially rain and waves, also reflect the longer pulses,which can add noise to the Radar screen. Viewinginformation about longer-range targets can also decrease theamount of space available on the Radar screen for viewinginformation about shorter-range targets.• Determine what information you need to see on theRadar screen.For example, do you need information about nearbyweather conditions or targets and traffic, or are you moreconcerned about distant weather conditions?• Assess the environmental conditions where the radar isbeing used.Especially in inclement weather, longer-range radarsignals can increase the clutter on the Radar screen andmake it more difficult to view information about shorter-range targets. In rain, shorter-range radar signals canenable you to view information about nearby objects moreeffectively, if the rain clutter setting is configuredoptimally.• Select the shortest effective range, given your reason forusing radar and the present environmental conditions.Sentry ModeSentry mode allows you to put the radar into timed-transmitmode, in which you can configure a radar transmit andstandby cycle to conserve power. You can also enable aguard zone in this mode, which identifies a safe zone aroundyour boat and sounds an alarm when a radar object entersthe zone. Sentry mode works with all Garmin GMR modelradars.Enabling Timed TransmitSelect Radar > Sentry > Menu > Sentry Setup > TimedXmit > On.Setting the Standby and Transmit TimesBefore you can set the standby and transmit times, you mustenable timed transmit (page 17).To help conserve power, you can indicate the radar standbytime and the transmit time to implement periodic radar signaltransmissions at set intervals.1Select Radar > Sentry > Menu > Sentry Setup.2Select Stdby Time.3Enter the time interval between radar signaltransmissions.4Select Xmit Time.5Enter the duration of each radar signal transmission.Enabling a Guard ZoneSelect Radar > Sentry > Menu > Sentry Setup > EnableGuard Zone.Defining a Circular Guard ZoneBefore you can define the boundaries of the guard zone, youmust enable a guard zone (page 17).You can define a circular guard zone that completelyencompasses your boat.1Select Radar > Sentry > Menu > Sentry Setup > AdjustGuard Zone > Move Radar Guard Zone > Circle.2Select the location of the outer guard zone circle.3Select the location of the inner guard zone circle to definethe width of the guard zone.Defining a Partial Guard ZoneYou can define the boundaries of a guard zone that does notcompletely encompass your boat.1Select Radar > Sentry > Menu > Sentry Setup > AdjustGuard Zone > Move Radar Guard Zone > Corner 1.2Touch and drag the location of the outer guard-zonecorner À.3Select Corner 2.4Touch the location of the inner guard-zone corner Á todefine the width of the guard zone.Marking a Waypoint on the Radar Screen1From a Radar screen or the Radar overlay, select alocation.2Select Create Waypoint.Viewing a List of AIS ThreatsFrom any Radar screen or the Radar overlay, you can viewand customize the appearance of a list of AIS threats.From a Radar screen or the Radar overlay, select Menu> Other Vessels > AIS List.Showing AIS Vessels on the Radar ScreenAIS requires the use of an external AIS device and activetransponder signals from other vessels.You can configure how other vessels appear on the Radarscreen. If any setting (except the AIS display range) isconfigured for one radar mode, the setting is applied to everyother radar mode. The details and projected heading settingsconfigured for one radar mode are applied to every otherradar mode and to the Radar overlay.1From a Radar screen or the Radar overlay, select Menu> Other Vessels > AIS Display Setup.2Select an option:•To indicate the distance from your location withinwhich AIS vessels appear, select AIS Display Range,and select a distance.• To show details about AIS-activated vessels, selectDetails > Show.• To set the projected heading time for AIS-activatedvessels, select Projected Heading, and enter thetime.• To show the tracks of AIS vessels, select Trails, andselect the length of the track that appears.VRM and EBLThe variable range marker (VRM) and the electronic bearingline (EBL) measure the distance and bearing from your boatRadar 17
to a target object. On the Radar screen, the VRM appears asa circle that is centered on the present location of your boat,and the EBL appears as a line that begins at the presentlocation of your boat and intersects the VRM. The point ofintersection is the target of the VRM and the EBL.Showing the VRM and the EBLThe VRM and the EBL configured for one mode are appliedto all other radar modes.From a Radar screen, select Menu > Show VRM/EBL.Adjusting the VRM and the EBLBefore you can adjust the VRM and the EBL, you must showthem on the Radar screen (page 18).You can adjust the diameter of the VRM and the angle of theEBL, which moves the intersection point of the VRM and theEBL. The VRM and the EBL configured for one mode areapplied to all other radar modes.1From a Radar screen, select a new location for theintersection point of the VRM and the EBL.2Select Drop VRM/EBL.3Select Stop Pointing.Measuring the Range and Bearing to a TargetObjectBefore you can adjust the VRM and the EBL, you must showthem on the Radar screen (page 18).1From a Radar screen, select the target location.2Select Measure Distance.The range and the bearing to the target location appear inthe upper-left corner of the screen.Radar OverlayWhen you connect your chartplotter to an optional Garminmarine radar, you can use the Radar overlay to overlay radarinformation on the Navigation chart or on the Fishing chart.The Radar overlay superimposes radar information on theNavigation chart or the Fishing chart. Data appears on theRadar overlay based on the most recently used radar mode(such as Harbor, Offshore, or Sentry), and all settingsconfigurations applied to the Radar overlay are also appliedto the last-used radar mode. For example, if you use Harbormode and then you switch to the Radar overlay, the Radaroverlay would show Harbor mode radar data. If you changedthe gain setting using the Radar overlay menu, the gainsetting for Harbor mode would change automatically.Radar Overlay and Chart Data AlignmentWhen using the Radar overlay, the chartplotter aligns radardata with chart data based on the boat heading, which isbased by default on data from a magnetic heading sensorconnected using a NMEA 0183 or NMEA 2000 network. If aheading sensor is not available, the boat heading is based onGPS tracking data.GPS tracking data indicates the direction in which the boat ismoving, not the direction in which the boat is pointing. If theboat is drifting backward or sideways due to a current orwind, the Radar overlay may not perfectly align with the chartdata. This situation should be avoided by using boat-headingdata from an electronic compass.If the boat heading is based on data from a magnetic headingsensor or an automatic pilot, the heading data could becompromised due to incorrect setup, mechanical malfunction,magnetic interference, or other factors. If the heading data iscompromised, the Radar overlay may not align perfectly withthe chart data.Showing the Radar OverlayThe Radar overlay displays data based on the most recentlyused radar mode.Select Radar > Radar Overlay.The radar picture appears in orange and overlays theNavigation chart.Stopping the Transmission of RadarSignalsFrom the Radar screen, select Menu > Radar toStandby.Optimizing the Radar DisplayYou can adjust the radar display settings for reduced clutterand increased accuracy.NOTE: You can optimize the radar display for each radarmode.1Select a radar range (page 18).2Restore the default value of the gain setting (page 18).3Adjust the gain setting manually (page 18).Range of Radar SignalsThe range of the radar signal indicates the length of thepulsed signal transmitted and received by the radar. As therange increases, the radar transmits longer pulses in order toreach distant targets. Closer targets, especially rain andwaves, also reflect the longer pulses, which can add noise tothe Radar screen. Viewing information about longer-rangetargets can also decrease the amount of space available onthe Radar screen for viewing information about shorter-rangetargets.Radar Gain and ClutterAutomatically Adjusting Gain on the Radar ScreenAuto is the default value for the gain setting. The automaticgain setting for each Radar mode is optimized for that mode,and may differ from the automatic gain setting used foranother mode.NOTE: Depending upon the radar in use, the gain settingconfigured for use in one radar mode may or may not beapplied to other radar modes or to the Radar overlay.From a Radar screen or the Radar overlay, select Menu> Gain > Auto.The chartplotter sets the gain automatically once, basedon average conditions, the range of the radar signal, andthe selected radar mode. The chartplotter does notreadjust the gain automatically in response to changingconditions.Manually Adjusting Gain on the Radar ScreenFor optimal radar performance that accounts for actualconditions, you can manually adjust the gain.NOTE: Depending upon the radar in use, the gain settingconfigured for use in one radar mode may or may not beapplied to other radar modes or to the Radar overlay.1From a Radar screen or the Radar overlay, select Menu> Gain.2Select Up to raise the gain, until light speckles appearacross the Radar screen.18 Radar
Data on the Radar screen is refreshed every fewseconds. As a result, the effects of manually adjusting thegain may not appear instantly. Adjust the gain slowly.3Select Down to lower the gain until the specklesdisappear.4If boats, land, or other targets are within range, selectDown to lower the gain until the targets begin to blink.5Select Up to raise the gain until the boats, land, or othertargets appear steadily lit on the Radar screen.6Minimize the appearance of nearby large objects, ifnecessary.7Minimize the appearance of side-lobe echoes, ifnecessary.Minimizing Nearby Large-Object InterferenceNearby targets of significant size, such as jetty walls, cancause a very bright image of the target to appear on theRadar screen. This image can obscure smaller targetslocated near it.NOTE: Depending upon the radar in use, the gain settingconfigured for use in one radar mode may or may not beapplied to other radar modes or to the Radar overlay.1From a Radar screen or the Radar overlay, select Menu> Gain.2Select Down to lower the gain until the smaller targetsare clearly visible on the Radar screen.Reducing the gain to eliminate nearby large-objectinterference may cause smaller or distant targets to blinkor disappear from the Radar screen.Minimizing Side-Lobe Interference on the Radar ScreenSide-lobe interference may appear to streak outward from atarget in a semi-circular pattern. Side-lobe effects can beavoided by reducing the gain or reducing the radar range.NOTE: Depending upon the radar in use, the gain settingconfigured for use in one radar mode may or may not beapplied to other radar modes or to the Radar overlay.1From a Radar screen or the Radar overlay, select Menu> Gain.2Select Down to lower the gain until the semi-circular,streaked pattern disappears from the Radar screen.Reducing the gain to eliminate side-lobe interference maycause smaller or distant targets to blink or disappear fromthe Radar screen.Adjusting Sea Clutter on the Radar ScreenYou can adjust the appearance of clutter caused by choppysea conditions. The sea clutter setting affects the appearanceof nearby clutter and targets more than it affects theappearance of distant clutter and targets. A higher sea cluttersetting reduces the appearance of clutter caused by nearbywaves, but it can also reduce or eliminate the appearance ofnearby targets.NOTE: Depending upon the radar in use, the sea cluttersetting configured for use in one radar mode may or may notbe applied to other radar modes or to the Radar overlay.1From a Radar screen or the Radar overlay, select Menu> Noise Rejection > Sea Clutter > Presets.2Select a setting that reflects the present sea conditions.3Select Menu > Noise Rejection > Sea Clutter.4Select Up or Down to adjust the appearance of seaclutter until other targets are clearly visible on the Radarscreen.Clutter caused by sea conditions may still be visible.Adjusting Rain Clutter on the Radar ScreenYou can adjust the appearance of clutter caused by rain.Reducing the radar range also can minimize rain clutter(page 16).The rain clutter setting effects the appearance of nearby rainclutter and targets more than it effects the appearance ofdistant rain clutter and targets. A higher rain clutter settingreduces the appearance of clutter caused by nearby rain, butit can also reduce or eliminate the appearance of nearbytargets.NOTE: Depending upon the radar in use, the rain cluttersettings configured for use in one radar mode may or maynot be applied to other radar modes or to the Radar overlay.1From a Radar screen or the Radar overlay, select Menu> Noise Rejection > Rain Clutter.2Select Up or Down to decrease or increase theappearance of nearby rain clutter until other targets areclearly visible on the Radar screen.Clutter caused by rain may still be visible.Reducing Cross Talk Clutter on the Radar ScreenYou can reduce the appearance of clutter caused byinterference from another nearby radar source, when theCross Talk Reject setting is on.NOTE: Depending upon the radar in use, the crosstalksetting configured for use in one radar mode may or may notbe applied to other radar modes or to the Radar overlay.From a Radar screen or the Radar overlay, select Menu> Noise Rejection > Cross Talk Reject.Radar Display SettingsFrom any Radar screen or the Radar overlay, select Menu >Radar Setup.Orientation: Sets the perspective of the radar display. Theorientation setting applies to every radar mode. Thissetting does not apply to the Radar overlay.Appearance: Sets the color scheme, look-ahead speed, andnavigation appearance.Front of Boat: Compensates for the physical location of theradar scanner on a boat, if the radar scanner does notalign with the bow-stern axis.Radar Appearance SettingsFrom a Radar screen, select Menu > Radar Setup >Appearance.NOTE: These settings do not apply to the Radar overlay.Color Scheme: Sets the color scheme.Look-Ahead Speed: Shifts your present location toward thebottom of the screen automatically as your speedincreases. Enter your top speed for the best results.Heading Line: Shows an extension from the bow of the boatin the direction of travel on the radar screen.Rings: Shows the range rings that help you to visualizedistances on the radar screen.Nav. Lines: Shows the navigation lines that indicate thecourse you have set using Route To, Guide To, or Go To.Waypoints: Shows waypoints on the radar screen.Radar 19
Front-of-Boat OffsetThe front-of-boat offset compensates for the physical locationof the radar scanner on a boat, if the radar scanner does notalign with the bow-stern axis.Measuring the Potential Front-of-Boat OffsetThe front-of-boat offset compensates for the physical locationof the radar scanner on a boat, if the radar scanner does notalign with the bow-stern axis.1Using a magnetic compass, take an optical bearing of astationary target located within viewable range.2Measure the target bearing on the radar.3If the bearing deviation is more than +/- 1°, set the front-of-boat offset.Setting the Front-of-Boat OffsetBefore you can set the front-of-boat offset, you must measurethe potential front-of-boat offset.The front-of-boat offset setting configured for use in oneradar mode is applied to every other radar mode and to theRadar overlay.1From a Radar screen or the Radar overlay, select Menu> Radar Setup > Front of Boat.2Select Up or Down to adjust the offset.Digital Selective CallingNetworked Chartplotter and VHF RadioFunctionalityIf you have a NMEA 0183 VHF radio or a NMEA 2000 VHFradio connected to your chartplotter, these features areenabled.• The chartplotter can transfer your GPS position to yourradio. If your radio is capable, GPS position information istransmitted with DSC calls.• The chartplotter can receive digital selective calling (DSC)distress and position information from the radio.• The chartplotter can track the positions of vesselssending position reports.If you have a Garmin NMEA 2000 VHF radio connected toyour chartplotter, these features are also enabled.• The chartplotter allows you to quickly set up and sendindividual routine call details to your Garmin VHF radio.• When you initiate a man-overboard distress call from yourradio, the chartplotter shows the man-overboard screenand prompts you to navigate to the man-overboard point.• When you initiate a man-overboard distress call from yourchartplotter, the radio shows the Distress Call page toinitiate a man-overboard distress call.Turning On DSCSelect Settings > Other Vessels > DSC.DSC ListThe DSC list is a log of the most recent DSC calls and otherDSC contacts you have entered. The DSC list can contain upto 100 entries. The DSC list shows the most recent call froma boat. If a second call is received from the same boat, itreplaces the first call in the call list.Viewing the DSC ListBefore you can view the DSC list, the chartplotter must beconnected to a VHF radio that supports DSC.Select Nav Info > Other Vessels > DSC List.Adding a DSC ContactYou can add a vessel to your DSC list. You can make calls toa DSC contact from the chartplotter.1Select Nav Info > Other Vessels > DSC List > AddContact.2Enter the Maritime Mobile Service Identity (MMSI) of thevessel.3Enter the name of the vessel.Incoming Distress CallsIf your Garmin chartplotter and VHF radio are connectedusing NMEA 0183 or NMEA 2000, your chartplotter alertsyou when your VHF radio receives a DSC distress call. Ifposition information was sent with the distress call, thatinformation is also available and recorded with the call. designates a distress call in the DSC list and marks theposition of the vessel on the Navigation chart at the time ofthe DSC distress call.Navigating to a Vessel in Distress designates a distress call in the DSC list and marks theposition of a vessel on the Navigation chart at the time of theDSC distress call.1Select Nav Info > Other Vessels > DSC List.2Select a position-report call.3Select Navigate To.4Select Go To or Route To.Man-Overboard Distress Calls Initiated from a VHFRadioWhen your chartplotter is connected to a Garmin NMEA 2000compatible radio, and you initiate a man-overboard DSCdistress call from your radio, your Garmin chartplotter showsthe man-overboard screen and prompts you to navigate tothe man-overboard point. If you have a Garmin autopilotsystem connected to the network, your chartplotter promptsyou to start a Williamson’s turn to the man-overboard point.If you cancel the man-overboard distress call on the radio,the chartplotter screen prompting you to activate navigationto the man-overboard location disappears.Man-Overboard Distress Calls Initiated from theChartplotterWhen your chartplotter is connected to a Garmin NMEA 2000compatible radio and you activate navigation to a man-overboard location, the radio shows the Distress Call page soyou can quickly initiate a man-overboard distress call.For information on placing distress calls from your radio, seethe VHF radio owner’s manual. For information aboutmarking an MOB, see page 9.Position TrackingWhen you connect your Garmin chartplotter to a VHF radiousing NMEA 0183, you can track vessels that send positionreports. This feature is also available with NMEA 2000, whenthe vessel sends the correct PGN data (PGN 129808; DSCCall Information).20 Digital Selective Calling
Every position report call received is logged in the DSC list(page 20).Viewing a Position Report1Select Nav Info > Other Vessels > DSC List.2Select a position-report call.3Select an option:• To switch to position report details, select .• To switch to a Navigation chart marking the location,select .Navigating to a Tracked Vessel1Select Nav Info > Other Vessels > DSC List.2Select a position-report call.3Select Navigate To.4Select Go To or Route To.Creating a Waypoint at the Position of a TrackedVessel1Select Nav Info > Other Vessels > DSC List.2Select a position-report call.3Select Create Waypoint.Editing Information in a Position Report1Select Nav Info > Other Vessels > DSC List.2Select a position-report call.3Select Edit.• To enter the name of the vessel, select Name.• To select a new symbol, select Symbol.• To enter a comment, select Comment.• To show a trail line for the vessel if your radio istracking the position of the vessel, select Trail >Show.• To select a color for the trail line, select Trail Line.Deleting a Position-Report Call1Select Nav Info > Other Vessels > DSC List.2Select a position-report call.3Select Edit > Clear Report.Viewing Vessel Trails on the ChartYou can view trails for all tracked vessels on some chartviews. By default, a black line indicates the path of thevessel, a black dot indicates each previously reportedposition of a tracked vessel, and a blue flag indicates the lastreported position of the vessel.1From a chart or 3D chart view, select Menu > OtherVessels > DSC Trails.2Select the number of hours to show tracked vessels onthe chart.For example, if you select 4 Hours, all trail points that areless than four hours old appear for all tracked vessels.Individual Routine CallsWhen you connect your Garmin chartplotter to a Garmin VHFradio over the NMEA 2000 or the NMEA 0183 network, youcan use the chartplotter interface to set up an individualroutine call.When setting up an individual routine call from yourchartplotter, you can select the DSC channel on which youwant to communicate. The radio transmits this request withyour call.Selecting a DSC ChannelNOTE: The selection of a DSC channel is limited to thosechannels that are available in all frequency bands. Thedefault channel is 72. If you select a different channel, thechartplotter uses that channel for subsequent calls until youcall using another channel.1Select Nav Info > Other Vessels > DSC List.2Select a vessel or a station to call.3Select Call with Radio > Channel.Making an Individual Routine CallNOTE: When initiating a call from the chartplotter, if the radiodoes not have an MMSI number programmed, the radio willnot receive call information.1Select Nav Info > Other Vessels > DSC List.2Select a vessel or a station to call.3Select Call with Radio.4If necessary, select Channel, and select a new channel.5Select Send.The chartplotter sends information about the call to theradio.6On your Garmin VHF radio, select Call.Making an Individual Routine Call to an AIS Target1From a chart or 3D chart view, select an AIS target.2Select AIS Vessel > Call with Radio.3If necessary, select Channel, and select a new channel.4Select Send.The chartplotter sends information about the call to theradio.5On your Garmin VHF radio, select Call.Viewing VideoBefore you can view video, you must connect a compatiblechartplotter to an analog video source.NOTE: This feature is not available with all models.Select Video.Configuring the Video Appearance1Select Video > Menu.2Select an option:• To show the video using a stretched aspect ratio,select Aspect > Stretch. The video cannot bestretched beyond the dimensions provided by theconnected video device, and it may not fill the entirescreen.• To show the video using a standard aspect ratio,select Aspect > Standard.• To adjust the brightness, select Brightness, andselect Up, Down, or Auto.• To adjust the color saturation, select Saturation, andselect Up, Down, or Auto.• To adjust the contrast, select Contrast, and selectUp, Down, or Auto.Viewing Video 21
• To allow the chartplotter to automatically select thesource format, select Standard > Auto.SiriusXM™ WARNINGThe weather information provided through this product issubject to service interruptions and may contain errors,inaccuracies, or outdated information, and consequentlyshould not be relied upon exclusively. Always use commonsense while driving or navigating, and check alternateweather information sources prior to making safety-relateddecisions. You acknowledge and agree that you shall besolely responsible for use of the weather information and alldecisions taken with respect to driving or navigating inweather. Garmin will not be responsible for anyconsequences of using the weather data.NOTE: SiriusXM data is not available in all regions.A Garmin SiriusXM satellite weather receiver and antennareceives XM WX Satellite Weather data and shows it onvarious Garmin devices, including the Navigation chart on acompatible chartplotter. The weather data for each featurecomes from reputable weather data centers such as theNational Weather Service and the HydrometeorologicalPrediction Center. For more information, go to www.xmwxweather.com.SiriusXM Equipment and SubscriptionRequirementsTo use XM WX satellite weather, you must have a compatiblesatellite weather receiver. To use SiriusXM satellite radio,you must have a compatible satellite radio receiver. Go to www.garmin.com for more information. You must also have avalid subscription to receive satellite weather and radio. Formore information, refer to the instructions for your satelliteweather and radio equipment.Weather Data BroadcastsXM WX Satellite Weather data is broadcast at five-minuteintervals. When the Garmin receiver is turned on, or when adifferent weather feature is selected, the receiver mustreceive new data before it can be shown. You mightexperience a delay before weather data or a different featureappears on the chart.NOTE: Any weather feature can change in appearance if thesource that provides the information changes.Viewing Precipitation InformationPrecipitation ranging from very light rain and snow, up tostrong thunderstorms, is indicated in varying shades andcolors. Precipitation is shown either independently or withother weather information.Select Weather > Precipitation.The time stamp in the upper-left corner of the screenindicates the elapsed time since the weather dataprovider last updated the information.Precipitation ViewsSelect Weather > Precipitation > Menu.Radar Loop: Shows precipitation information as an image ofthe latest update or as an animated loop of the latestupdates. The time stamp indicates the elapsed time sincethe service provider generated the weather radar framecurrently displayed on the screen.Cloud Cover: Shows cloud cover data.Satellite IR: Shows infrared satellite data, which displaysclouds based on cloud-top temperatures. Deeper shadesof gray represent colder clouds often found with cirrus orthunderstorm clouds. Lighter shades or a lack of shadingindicate warmer clouds usually associated with stratus orfog.Waypoints: Shows waypoints.Legend: Shows the weather legend.Storm Cell and Lightning InformationStorm cell icons on the weather Precipitation chartindicate both the present position of a storm and theprojected path of that storm in the immediate future.Red cones appear with a storm cell icon, and the widest partof each cone points in the direction of the projected path ofthe storm cell. The red lines in each cone indicate where thestorm will most likely be in the near future. Each linerepresents 15 minutes.Lightning strikes are represented by . Lightning appears onthe weather Precipitation chart if strikes were detected withinthe last seven minutes. The ground-based lightning detectionnetwork detects cloud-to-ground lightning only.Hurricane InformationThe weather Precipitation chart can show the presentposition of a hurricane , a tropical storm, or a tropicaldepression. A red line stemming from a hurricane iconindicates the projected path of the hurricane. Darkened dotson the red line indicate the projected locations through whichthe hurricane will pass, as received from the weather dataprovider.Weather Warnings and Weather BulletinsWhen a marine weather warning, weather watch, weatheradvisory, weather bulletin, or other weather statement isissued, shading indicates the area to which the informationapplies. The aqua lines on the chart indicate the boundariesof marine forecasts, coastal forecasts, and offshoreforecasts. Weather bulletins may consist of either weatherwatches or weather advisories.To view information about the warning or bulletin, select theshaded area.Color Marine WeatherGroupWeather SubcategoriesLightBlueFlash FloodDarkBlueFlood Areal Flood, Coastal Flood, DebrisFlow, Flood, High Water Level,Hydrological, Lakeshore Flood, StormSurgeYellow Marine/Wind Brisk Wind, Extreme Wind, FreezingSpray, Gale, Hazardous Seas, HighSurf, High Wind, Hurricane ForceWind, Lake Wind, Les Suêtes Wind,Low Water, Marine Weather, RipTide, Small Craft, Small CraftHazardous Seas, Small Craft RoughBar, Small Craft Winds, SpecialMarine, Squall, Storm, Strong Wind,Tsunami, Waterspout, Wind,Wreckhouse Winds22 SiriusXM™
Color Marine WeatherGroupWeather SubcategoriesPink Miscellaneous Air Quality, Air Stagnation, Ashfall,Blowing Dust, Excessive Heat, FireWeather, Heat, High Heat andHumidity, Humidex, Humidex andHealth, Rainfall, Special Weather,WeatherOrange Severe StormRed TornadoPurple Tropical Hurricane, Inland Hurricane, InlandTropical Storm, Tropical Storm,TyphoonDarkGrayVisibility Dense Fog, Dense Smoke, DustStorm, SmogWhite Winter Arctic Outflow, Avalanche, Blizzard,Blowing Snow, Cold Wave, ExtremeCold, Flash Freeze, Freeze, FreezingDrizzle, Freezing Fog, Freezing Rain,Frost, Hard Freeze, Heavy FreezingSpray, Heavy Snow, Ice Storm, LakeEffect Blowing Snow, Lake EffectSnow, Sleet, Snow, Snow andBlowing Snow, Snow Squall,Snowfall, Wind Chill, Winter Storm,Winter WeatherForecast InformationThe Forecast chart shows city forecasts, marine forecasts,warnings, hurricane warnings, METARS, county warnings,weather fronts and pressure centers, surface pressure, andWX buoys.Viewing Forecast Information for Another TimePeriod1Select Weather > Forecast.2Select an option:•To view the weather forecast for the next 12 hours,select Next Forecast or , and to view forecasts up to48 hours, in 12-hour increments, select NextForecast or again.• To view the weather forecast for the previous 12hours, select Previous Forecast or , and to viewprevious forecasts, up to 48 hours ago, in 12-hourincrements, select Previous Forecast or again.Viewing a Marine Forecast or an Offshore Forecast1Select Weather > Forecast.2Pan the chart to an offshore location.The Marine Forecast or Offshore Forecast options appearwhen forecast information is available.3Select Marine Forecast or Offshore Forecast.Weather Fronts and Pressure CentersWeather fronts appear as lines that indicate the leading edgeof an air mass.Front Symbol DescriptionCold frontWarm frontStationary frontFront Symbol DescriptionOccluded frontTroughPressure-center symbols often appear near weather fronts.Pressure-CenterSymbolDescriptionIndicates a low-pressure center, which is a region ofrelatively lower pressure. Moving away from a low-pressure center results in increased pressure.Winds flow counterclockwise around low-pressurecenters in the northern hemisphere.Indicates a high-pressure center, which is a regionof relatively higher pressure. Moving away from ahigh-pressure center results in decreased pressure.Winds flow clockwise around high-pressure centersin the northern hemisphere.City ForecastsCity forecasts appear as weather symbols. The forecast isviewed in 12-hour increments.Symbol Weather Symbol WeatherPartly cloudy Fair (sunny, hot, clear)Cloudy Rain (drizzle, sleet,showers)Windy FoggyThunderstorms Snow (snow showers,flurries, blizzard, blowingsnow, sleet, freezing rain,freezing drizzle)Smoke (dusty, hazy)Viewing Sea ConditionsThe Sea Conditions chart shows information about surfaceconditions, including winds, wave height, wave period, andwave direction.Select Weather > Sea Conditions.Surface WindsSurface wind vectors appear on the Sea Conditions chartusing wind barbs that indicate the direction from which thewind is blowing. A wind barb is a circle with a tail. The line orflag attached to the tail of the wind barb indicates the windspeed. A short line represents 5 knots, a long line represents10 knots, and triangle represents 50 knots.Wind Barb Wind Speed Wind Barb Wind SpeedCalm 20 knots5 knots 50 knots10 knots 65 knots15 knotsWave Height, Wave Period, and Wave DirectionWave heights for an area appear as variations in color.Different colors indicate different wave heights, as shown inthe legend.The wave period indicates the time (in seconds) betweensuccessive waves. Wave period lines indicate areas thathave the same wave period.SiriusXM™ 23
Wave directions appear on the chart using red arrows. Thedirection of each arrow pointer indicates the direction inwhich a wave is moving.Viewing Forecast Sea Conditions Information forAnother Time Period1Select Weather > Sea Conditions.2Select an option:• To view forecasted sea conditions for the next 12hours, select Next Forecast or , and to viewforecasts up to 48 hours, in 12-hour increments,select Next Forecast or again.• To view the forecasted sea conditions for the previous12 hours, select Previous Forecast or , and to viewprevious forecasts, up to 48 hours ago, in 12-hourincrements, select Previous Forecast or again.Viewing Fishing InformationThe weather Fishing chart shows present water temperature,present surface pressure conditions, and fishing forecasts.Select Weather > Fishing.Surface Pressure and Water Temperature DataSurface-pressure information appears as pressure isobarsand pressure centers. Isobars connect points of equalpressure. Pressure readings can help to determine weatherand wind conditions. High-pressure areas are generallyassociated with fair weather. Low-pressure areas aregenerally associated with clouds and the chance ofprecipitation. Isobars packed closely together show a strongpressure gradient. Strong pressure gradients are associatedwith areas of stronger winds.Pressure units are shown in millibars (mb), inches of Mercury(inHg), or hectopascals (hPa).Colored shading indicates the surface temperature of thewater, as shown in the legend in the corner of the display.Forecasting Fish LocationsYou can show areas that contain optimal weather conditionsfor specific species of fish.1Select Weather > Fishing > Menu > Fish Species.2Select a species of fish.3Select On.4Repeat steps 2 and 3 to show areas with optimal weatherconditions for additional species of fish.Shaded areas indicate optimal fishing areas. If you haveselected more than one species of fish, you can select ashaded area to view the fish species that are included inthe shaded area.Visibility InformationVisibility is the forecast maximum horizontal distance that canbe seen at the surface, as shown in the legend on the left ofthe screen. Variations in the visibility shading show theforecast change in surface visibility.Select Weather > Visibility.Viewing Forecast Visibility Information for AnotherTime Period1Select Weather > Visibility.2Select an option:• To view the visibility forecast for the next 12 hours,select Next Forecast or , and to view forecasts up to48 hours, in 12-hour increments, select NextForecast or again.• To view the visibility forecast for the previous 12hours, select Previous Forecast or , and to viewprevious forecasts, up to 48 hours ago, in 12-hourincrements, select Previous Forecast or again.Viewing Buoy ReportsReport readings are taken from buoys and coastalobservation stations. These readings are used to determineair temperature, dew point, water temperature, tide, waveheight and period, wind direction and speed, visibility, andbarometric pressure.1From a weather chart, select .2Select Review > Buoy.Review does not appear if the cursor is not near anobject. If the cursor is near only one object, the name ofthe buoy appears.Viewing Local Weather Information near a BuoyYou can select an area near a buoy to view forecastinformation.1From a weather chart, select a location on the chart.2Select Local Weather.3Select an option:• To view present weather conditions from a localweather service, select Current Cond..• To view a local weather forecast, select Forecast.• To view surface wind and barometric pressureinformation, select Sea Surface.• To view wind and wave information, select MarineBulletin.Creating a Waypoint on a Weather Chart1From a weather chart, select a location.2Select Create Waypoint.Weather OverlayThe weather overlay superimposes weather and weather-related information on the Navigation chart, the Fishing chart,and the Perspective 3D chart view. The Navigation chart andthe Fishing chart can show WX radar, height of cloud tops,lightning, WX buoys, county warnings, and hurricanewarnings. The Perspective 3D chart view can show WXradar.Weather overlay settings configured for use on one chart arenot applied to another chart. The weather overlay settings foreach chart must be configured separately.NOTE: The offshore Fishing chart is available with premiumcharts, in some areas.Turning On the Weather Overlay on a ChartFrom the Navigation chart or Fishing chart, select Menu >Chart Setup > Weather > Weather > On.Weather Overlay Settings on the Navigation ChartYou must turn on the weather overlay (page 24) before youcan change the settings of the weather overlay on theNavigation chart.24 SiriusXM™
From the Navigation chart, select Menu > Weather.WX RADAR: Shows WX radar.Cloud Cover: Shows cloud cover data.Satellite IR: Shows infrared satellite data, which displaysclouds based on cloud-top temperatures. Deeper shadesof gray represent colder clouds often found with cirrus orthunderstorm clouds. Lighter shades or a lack of shadingindicate warmer clouds usually associated with stratus orfog.Visibility: Shows visibility data.WX Buoys: Shows buoys.Legend: Shows the weather legend.Weather Overlay Settings on the Fishing ChartYou must turn on the weather overlay (page 24) before youcan change the settings of the weather overlay on the Fishingchart.From the Fishing chart, select Menu > Weather.WX RADAR: Shows WX radar.Sea Temperature: Shows sea temperature data.WX Buoys: Shows buoys.Legend: Shows the weather legend.Viewing Weather Subscription InformationYou can view information about the weather services youhave subscribed to and how many minutes have passedsince the data for each service was updated.Select Weather > Weather Subscription.SiriusXM RadioWhen you have a Garmin SiriusXM receiver connected to thechartplotter, you may have access to SiriusXM satellite radio,depending on your subscription.Customizing the Channel GuideSiriusXM radio channels are grouped in categories. You canselect the category of channels that appear in the channelguide.1Select Media > Menu > Category.2Select a category.Saving a SiriusXM Channel to the Presets ListYou can save your favorite channels to the presets list.1Select Media.2Select the channel you want to save as a preset.3Select Menu > Presets > Add Current Channel.Adjusting SiriusXM Satellite Radio Volume1Select Media > Menu.2Select or .Device ConfigurationTurning On the Chartplotter AutomaticallyYou can set the chartplotter to turn on automatically when thepower is applied. Otherwise, you must turn on the chartplotterby pressing .Select Settings > System > Auto Power.NOTE: When Auto Power is On, and the chartplotter isturned off using , and power is removed and reappliedwithin less than two minutes, you may need to press torestart the chartplotter.System SettingsSelect Settings > System.Display: Adjusts the backlight brightness and color scheme.Beeper: Turns on and off the tone that sounds for alarms andselections.Auto Power: Turns the device on automatically when poweris applied (page 25).Keyboard Layout: Sets the arrangement of the keyboard toan alphabetical or computer keyboard layout.Language: Sets the on-screen text language.Speed Sources: Selects the source of the speed data usedto calculate true wind speed or fuel economy. Waterspeed is the speed reading from a water-speed sensor,and GPS speed is calculated from your GPS position.System Information: Provides information about the deviceson the network and the software version.Simulator: Turns the simulator on or off and allows you toset the time, date, speed, and simulated location.GPS: Provides information about the GPS satellite settingsand fix (page 25).GPS SettingsSelect Settings > System > GPS.Skyview: Shows the relative position of GPS satellites in thesky.GLONASS: Turns on or off GLONASS usage (Russiasatellite system). When the system is used in situationswith poor sky visibility, this configuration can be used incombination with GPS to provide more accurate positioninformation.WAAS/EGNOS: Turns on or off WAAS (in North America) orEGNOS (in Europe), which can provide more-accurateGPS position information. When using WAAS or EGNOS,the device may take longer to acquire satellites.Speed Filter: Averages the speed of your vessel over a shortperiod of time for smoother speed values.Initialize Position: Initializes the GPS receiver and beginscollecting new almanac data from the satellites.Viewing the Event LogThe event log shows a list of system events.Select Settings > System > System Information >Event Log.Viewing System Software InformationYou can view the software version, the basemap version, anysupplemental map information (if applicable), the softwareversion for an optional Garmin radar (if applicable), and theunit ID number. You may need this information to update thesystem software or to purchase additional map datainformation.Select Settings > System > System Information >Software Information.My Vessel SettingsNOTE: Some settings and options require additional chartsor hardware.Device Configuration 25
Select Settings > My Vessel.Keel Offset: Offsets the surface reading for the depth of akeel, making it possible to measure depth from thebottom of the keel instead of from the transducer location(page 26).Temperature Offset: Compensates for the watertemperature reading from a NMEA 0183 water-temperature sensor or a temperature-capable transducer(page 26).Calibrate Water Speed: Calibrates the speed-sensingtransducer or sensor (page 26).Fuel Capacity: Sets the combined fuel capacity of all the fueltanks on your vessel (page 13).Fill Up All Tanks: Sets the tank levels to full (page 13).Add Fuel to Boat: Allows you to enter the quantity of fuelyou added to your tank, when you did not entirely fill upthe tank (page 13).Set Total Fuel Onboard: Sets the combined amount of fuelin all the fuel tanks on your vessel (page 13).Set Gauge Limits: Sets the upper and lower limits of variousgauges (page 12).Setting the Keel OffsetYou can enter a keel offset to compensate the surfacereading for the depth of a keel, making it possible to measuredepth from the bottom of the keel instead of from thetransducer location. Enter a positive number to offset for akeel. You can enter a negative number to compensate for alarge vessel that may draw several feet of water.1Complete an action, based on the location of thetransducer:• If the transducer is installed at the water line À,measure the distance from the transducer location tothe keel of the boat. Enter this value in step 3 and 4as a positive number.• If the transducer is installed at the bottom of the keelÁ, measure the distance from the transducer to thewater line. Enter this value in step 3 and 4 as anegative number.2Select Settings > My Vessel > Keel Offset.3Select or based on the location of the transducer.4Enter the distance measured in step 1.Calibrating a Water Speed DeviceIf you have a speed-sensing transducer connected to thechartplotter, you can calibrate that speed-sensing device toimprove the accuracy of water-speed data displayed by thechartplotter.1Select Settings > My Vessel > Calibrate Water Speed.2Follow the on-screen instructions.If the boat is not moving fast enough or the speed sensoris not registering a speed, a message appears.3Select OK, and safely increase the boat speed.4If the message appears again, stop the boat, and ensurethe speed-sensor wheel is not stuck.5If the wheel turns freely, check the cable connections.6If you continue to get the message, contact Garminproduct support.Setting the Water Temperature OffsetBefore you can set the water temperature offset, you musthave a NMEA 0183 water-temperature sensor or atemperature-capable transducer to measure watertemperature.The temperature offset compensates for the temperaturereading from a temperature sensor.1Measure the water temperature using the temperaturesensor or temperature-capable transducer that isconnected to the chartplotter.2Measure the water temperature using a differenttemperature sensor or a thermometer that is known to beaccurate.3Subtract the water temperature measured in step 1 fromthe water temperature measured in step 2.This is the temperature offset. Enter this value in step 5as a positive number if the sensor connected to thechartplotter measures the water temperature as beingcolder than it actually is. Enter this value in step 5 as anegative number if the sensor connected to thechartplotter measures the water temperature as beingwarmer than it actually is.4Select Settings > My Vessel > Temperature Offset.5Enter the temperature offset calculated in step 3.Communications SettingsNOTE: Some settings and options require additional chartsor hardware.Select Settings > Communications.Serial Port 1: Sets the input/output format for port 1 to usewhen connecting the chartplotter to external NMEAdevices, computers, or other Garmin devices.Serial Port 2: Sets the input/output format for port 2 to usewhen connecting the chartplotter to external NMEAdevices, computers, or other Garmin devices.NMEA 0183 Setup: Sets the NMEA 0183 sentences thechartplotter transmits, how many digits to the right of thedecimal point are transmitted in a NMEA output, and howwaypoints are identified (page 27).NMEA 2000 Setup: Allows you to view and label the deviceson the NMEA 2000 network (page 27).Wireless Devices: Allows you set up wireless devices(page 27).26 Device Configuration
NMEA 2000 and NMEA 0183GPSMAP 500 series and GPSMAP 700 series chartplotterscan accept data from both NMEA 0183 devices and certainNMEA 2000 devices connected to an existing NMEA 2000network on your boat.echoMAP 50 series and echoMAP 70 series chartplotters canaccept data from NMEA 0183 compliant devices.NMEA 0183The chartplotters support the NMEA 0183 standard, which isused to connect various NMEA 0183 devices, such as VHFradios, NMEA instruments, autopilots, wind sensors, andheading sensors.To connect the chartplotter to optional NMEA 0183 devices,see the chartplotter installation instructions.The approved NMEA 0183 sentences for the chartplotter areGPAPB, GPBOD, GPBWC, GPGGA, GPGLL, GPGSA,GPGSV, GPRMB, GPRMC, GPRTE, GPVTG, GPWPL,GPXTE, and Garmin proprietary sentences PGRME,PGRMM, and PGRMZ.This chartplotter also includes support for the WPL sentence,DSC, and sonar NMEA 0183 input with support for the DPT(depth) or DBT, MTW (water temperature), and VHW (watertemperature, speed, and heading) sentences.NMEA 0183 SettingsSelect Settings > Communications > NMEA 0183 Setup.Route: Enables NMEA 0183 output sentences for routes.System: Enables NMEA 0183 output sentences for systeminformation.Garmin: Enables NMEA 0183 output sentences for Garminproprietary sentences.Sounder: Enables NMEA 0183 output sentences for thesounder (if applicable).Posn Precision: Adjusts the number of digits to the right ofthe decimal point for transmission of NMEA output.Waypoint IDs: Sets the device to transmit waypoint namesor numbers via NMEA 0183 while navigating. Usingnumbers may resolve compatibility issues with olderNMEA 0183 autopilots.Defaults: Restores the NMEA 0183 settings to the originalfactory defaults.NMEA 2000GPSMAP 500 and 700 series chartplotters are NMEA 2000certified and can receive data from a NMEA 2000 networkinstalled on the boat to show specific information, such asdepth, speed, water temperature, wind speed and direction,and engine data.You can also name your engines and tanks so that you canbetter identify their location on the boat.To connect a GPSMAP chartplotter to an existing NMEA2000 network and to see a list of supported NMEA 2000 PGNnumbers, see the chartplotter installation instructions.Viewing a List of NMEA 2000 Network DevicesYou can view the devices connected to the NMEA 2000network.Select Settings > Communications > NMEA 2000Setup > Device List.Communication with Wireless DevicesThe chartplotters can create a wireless network to which youcan connect wireless devices. Also, some models canconnect to Bluetooth® wireless devices using the AVRCPprofile.Connecting a Bluetooth Wireless DeviceYou can wirelessly connect the chartplotter to a Bluetoothdevice.1Place the Bluetooth device within 33 ft. (10 m) of thechartplotter.2Select Settings > Communications > Wireless Devices> Bluetooth Devices > Bluetooth.3Follow the on-screen directions.Disconnecting a Bluetooth Wireless Device1Select Settings > Communications > Wireless Devices> Bluetooth Devices > Device List.2Select a device.3Select Forget Device.Setting Up the Wireless NetworkThe first time you access the Wireless Network settings, youare prompted to set up the network.1Select Settings > Communications > Wireless Devices> Wireless Network > On.2Enter a name for this wireless network.3Enter a password.You will need this password to access the wirelessnetwork from a wireless device.Connecting a Wireless Device to the ChartplotterBefore you can connect a wireless device to the chartplotterwireless network, you must configure the chartplotter wirelessnetwork (page 27).You can connect a wireless device to the chartplotter toshare data. For example, you can connect an iOS® device tothe chartplotter to share BlueChart Mobile data.1From the iOS device, select Settings > Wi-Fi.2Select the wireless network name you entered for thechartplotter network (page 27).3Enter the password you entered when you set up thechartplotter as a wireless network.Setting AlarmsNavigation AlarmsSelect Settings > Alarms > Navigation.Arrival: Sets an alarm to sound when you are within aspecified distance or time from a turn or a destination.Anchor Drag: Sets an alarm to sound when you exceed aspecified drift distance while anchored.Off Course: Sets an alarm to sound when you are off courseby a specified distance.System AlarmsAlarm Clock: Sets an alarm clock.Device Voltage: Sets an alarm to sound when the batteryreaches a specified low voltage.GPS Accuracy: Sets an alarm to sound when the GPSlocation accuracy falls outside the user-defined value.Setting the Fuel AlarmBefore you can set a fuel level alarm, a compatible fuel flowsensor must be connected to the NMEA 2000 network.Device Configuration 27
You can set an alarm to sound when the total amount ofremaining onboard fuel reaches the level you specify.1Select Settings > Alarms > Fuel > Fuel Alarm > On.2Enter the remaining amount of fuel that triggers the alarm.Setting Weather AlarmsBefore you can set weather alarms, you must have acompatible chartplotter connected to a weather device, suchas a GXM™ device, and have a valid weather subscription.1Select Settings > Alarms > Weather.2Turn on alarms for specific weather events.Units SettingsSelect Settings > Units.System Units: Sets the unit format for the device.Heading: Sets the direction references used in calculatingheading information. Auto Mag Var (automatic magneticvariation) sets the magnetic declination for your locationautomatically. True sets true north as the headingreference. Grid sets grid north as the heading reference(000º). User Mag Var allows you to enter the magneticvariation value manually.Position Format: Sets the position format in which a givenlocation reading appears. Do not change this settingunless you are using a map or chart that specifies adifferent position format.Map Datum: Sets the coordinate system on which the map isstructured. Do not change this setting unless you areusing a map or chart that specifies a different map datum.Pressure Reference Time: Sets the reference time used tocalculate the barometer trend. The trend is indicated inthe barometer field.Time Format: Sets a 12-hour, 24-hour, or UTC time format.Time Zone: Sets the time zone, or allows automatic selectionbased on GPS location.Navigation SettingsNOTE: Some settings and options require additional chartsor hardware.Select Settings > Navigation.Route Labels: Sets the type of labels shown with route turnson the map.Auto Guidance: Sets the measurements for the Safe Depth,Safe Height, and Shoreline Distance, when you areusing some premium maps.Turn Transition Activation: Sets the turn transition to becalculated based on time or distance.Turn Transition Time: Sets how many minutes before theturn that you transition to it as the next leg, when Time isselected for the Turn Transition Activation. You canraise this value to help improve the accuracy of theautopilot when navigating a route or an Auto Guidanceline with many frequent turns or at higher speeds. Forstraighter routes or slower speeds, lowering this valuecan improve autopilot accuracy.Turn Transition Distance: Sets how far before the turn thatyou transition to it as the next leg, when Distance isselected for the Turn Transition Activation. You canraise this value to help improve the accuracy of theautopilot when navigating a route or an Auto Guidanceline with many frequent turns or at higher speeds. Forstraighter routes or slower speeds, lowering this valuecan improve autopilot accuracy.Route Start: Selects a starting point for route navigation.Auto Guidance Line Configurations CAUTIONThe Safe Depth and Safe Height settings influence how thechartplotter calculates an Auto Guidance line. If an area hasan unknown water depth or an unknown obstacle height, theAuto Guidance line is not calculated in that area. If an area atthe beginning or the end of an Auto Guidance line isshallower than the safe water depth or lower than the safeobstacle height, the Auto Guidance line is not calculated inthat area. On the chart, the course through those areasappears as a gray line. When your boat enters one of thoseareas, a warning message appears.NOTE: Auto Guidance is available with premium charts, insome areas.You can set the parameters the chartplotter uses whencalculating an Auto Guidance line.Safe Depth: Sets the minimum depth (chart depth datum) thechartplotter uses when calculating an Auto Guidance line.Safe Height: Sets the minimum height (chart height datum)of a bridge that your boat can safely travel under.Shoreline Distance: Sets how close to the shore you wantthe Auto Guidance line to be placed. The Auto Guidanceline may move if you change this setting while navigating.The available values for this setting are relative, notabsolute. To ensure that the Auto Guidance line is placedthe appropriate distance from shore, you can assess theplacement of the Auto Guidance line using one or morefamiliar destinations that require navigation through anarrow waterway (page 28).Adjusting the Distance from Shore CAUTIONThe Auto Guidance feature is based on electronic chartinformation. That data does not ensure obstacle and bottomclearance. Carefully compare the course to all visualsightings, and avoid any land, shallow water, or otherobstacles that may be in your path.NOTE: Auto Guidance is available with premium charts, insome areas.The Shoreline Distance setting indicates how close to theshore you want the Auto Guidance line to be placed. TheAuto Guidance line may move if you change this setting whilenavigating. The available values for the Shoreline Distancesetting are relative, not absolute. To ensure the AutoGuidance line is placed the appropriate distance from shore,you can assess the placement of the Auto Guidance lineusing one or more familiar destinations that requirenavigation through a narrow waterway.1Dock your vessel or drop the anchor.2Select Settings > Navigation > Auto Guidance >Shoreline Distance > Normal.3Select a destination that you have navigated topreviously.4Select Navigate To > Guide To.5Review the placement of the Auto Guidance line, anddetermine whether the line safely avoids known obstaclesand the turns enable efficient travel.28 Device Configuration
6Select an option:•If the placement of the Auto Guidance line issatisfactory, select Menu > Stop Navigation, andproceed to step 10.• If the Auto Guidance line is too close to knownobstacles, select Settings > Navigation > AutoGuidance > Shoreline Distance > Far.• If the turns in the Auto Guidance line are too wide,select Settings > Navigation > Auto Guidance >Shoreline Distance > Near.7If you selected Near or Far in step 6, review theplacement of the Auto Guidance line, and determinewhether the line safely avoids known obstacles and theturns enable efficient travel.Auto Guidance maintains a wide clearance fromobstacles in open water, even if you set the ShorelineDistance setting to Near or Nearest. As a result, thechartplotter may not reposition the Auto Guidance line,unless the destination selected requires navigationthrough a narrow waterway.8Select an option:• If the placement of the Auto Guidance line issatisfactory, select Menu > Stop Navigation, andproceed to step 10.• If the Auto Guidance line is too close to knownobstacles, select Settings > Navigation > AutoGuidance > Shoreline Distance > Farthest.• If the turns in the Auto Guidance line are too wide,select Settings > Navigation > Auto Guidance >Shoreline Distance > Nearest.9If you selected Nearest or Farthest in step 8, review theplacement of the Auto Guidance line, and determinewhether the line safely avoids known obstacles and theturns enable efficient travel.Auto Guidance maintains a wide clearance fromobstacles in open water, even if you set the ShorelineDistance setting to Near or Nearest. As a result, thechartplotter may not reposition the Auto Guidance line,unless the destination selected requires navigationthrough a narrow waterway.10 Repeat steps 3 through 9 at least once more, using adifferent destination each time, until you are familiar withthe functionality of the Shoreline Distance setting.Other Vessel SettingsWhen your compatible chartplotter is connected to an AISdevice or VHF radio, you can set up how other vessels aredisplayed on the chartplotter.Select Settings > Other Vessels.AIS: Enables and disables AIS signal reception.DSC: Enables and disables digital selective calling (DSC).AIS Alarm: Sets the collision alarm (page 5 and page 6).Viewing System Software InformationYou can view the software version, the basemap version, anysupplemental map information (if applicable), the softwareversion for an optional Garmin radar (if applicable), and theunit ID number. You may need this information to update thesystem software or to purchase additional map datainformation.Select Settings > System > System Information >Software Information.Restoring the Original Chartplotter FactorySettingsNOTE: This will delete all settings information you haveentered.Select Settings > System > System Information >Factory Settings.Chartplotter Data ManagementCopying Waypoints, Routes, and Tracks toa ChartplotterBefore you can copy data to the chartplotter, you must havethe latest version of MapSource® or HomePort™ softwareprograms loaded on your computer and a memory cardinstalled in the chartplotter.Select an option:• Copy the data from HomePort to the preparedmemory card.For more information, see the HomePort help file.• Copy the data from MapSource to the preparedmemory card.For more information, see the MapSource help file.Copying Data from a Memory Card1Insert a memory card into a card slot.2Select Nav Info > Manage Data > Data Transfer > Card.3Select an option:• To transfer data from the memory card to thechartplotter and combine it with existing user data,select Merge From Card.• To transfer data from the memory card to thechartplotter and overwrite existing user data, selectReplace From Card.4Select the file name.Copying Waypoints, Routes, and Tracks toa Memory Card1Insert a memory card into the card slot.2Select Nav Info > Manage Data > Data Transfer > Card> Save to Card.3Select an option:• To create a new file, select Add New File, and entera name.• To add the information to an existing file, select thefile from the list.The file name is saved with a .adm extension.Copying Waypoints, Routes, and Tracks toor from all Chartplotters on a NMEA 2000NetworkYou can transfer information for waypoints, routes, and tracksfrom one chartplotter connected to a NMEA 2000 network toevery other chartplotter connected to the network. TheChartplotter Data Management 29
transfer may take a long time, depending on the number ofwaypoints being transferred.1Select Nav Info > Manage Data > Data Transfer >NMEA 2000.2Select an option:• To transfer data from the chartplotter to the otherchartplotters connected to the network, select CloneUser Data. Existing data is overwritten on thosechartplotters.• To transfer data between all the chartplottersconnected to the network, select Merge User Data.Unique data is combined with existing data on everychartplotter.Copying Built-In Maps to a Memory CardYou can copy maps from the chartplotter to a memory cardfor use with HomePort.1Insert a memory card into the card slot.2Select Nav Info > Manage Data > Data Transfer > Card.3To copy the maps loaded onto your chartplotter to thememory card, select Copy Built-In Map.Backing Up Data to a Computer1Insert a memory card into the card slot.2Select Nav Info > Manage Data > Data Transfer > Card> Save to Card.3Select a file name from the list, or select Add New File.4Select Save to Card.The file name saves with a .adm extension.5Remove the memory card and insert it into a card readerattached to a computer.6Open the Garmin\UserData folder on the memory card.7Copy the backup file on the card and paste it to anylocation on the computer.Restoring Backup Data to a Chartplotter1Insert a memory card into a card reader that is attachedto the computer.2Copy a backup file from the computer to the memorycard, into a folder named Garmin\UserData.3Insert a memory card into the card slot.4Select Nav Info > Manage Data > Data Transfer > Card> Replace From Card.Saving System Information to a MemoryCardYou can save system information to a memory card as atroubleshooting tool. A product support representative mayask you to use this information to retrieve data about thenetwork.1Insert a memory card into the card slot.2Select Settings > System > System Information >Garmin Devices > Save to Card.3Remove the memory card.AppendixRegistering Your DeviceHelp us better support you by completing our onlineregistration today.•Go to http://my.garmin.com.• Keep the original sales receipt, or a photocopy, in a safeplace.Calibrating the TouchscreenYou can calibrate the screen if the screen is not properlyresponding to the touches. The chartplotter touchscreen doesnot normally require calibration.1Select Settings > System > Display > CalibrateTouchscreen.2Follow the on-screen instructions.Updating the Device SoftwareThe device may contain a software-update memory card. Ifso, follow the instructions provided with the card.If a software update memory card is not included, go to www.garmin.com to make sure your device software is up-to-date.1If necessary, load the software update onto the memorycard from your computer by following the instructions on www.garmin.com.2Turn on the chartplotter.3Insert the memory card into the card slot.4Follow the on-screen instructions.ScreenshotsYou can capture a screenshot of any screen shown on yourchartplotter as a bitmap (.bmp) file. You can transfer thescreenshot to your computer.Capturing Screenshots1Insert a memory card into the card slot.2Select Settings > System > Display > ScreenshotCapture > On.3Go to a screen you want to capture.4Hold Home for at least six seconds.Copying Screenshots to a Computer1Remove the memory card from the chartplotter, andinsert it into a card reader that is attached to a computer.2From Windows® Explorer, open the Garmin\scrn folderon the memory card.3Copy a .bmp file from the card and paste it to any locationon the computer.NMEA 0183 InformationType Sentence DescriptionTransmit GPAPB APB: Heading or trackcontroller (autopilot) sentence"B"GPBOD BOD: Bearing (origin todestination)GPBWC BWC: Bearing and distance towaypoint30 Appendix
Type Sentence DescriptionGPGGA GGA: Global positioningsystem fix dataGPGLL GLL: Geographic position(latitude and longitude)GPGSA GSA: GNSS DOP and activesatellitesGPGSV GSV: GNSS satellites in viewGPRMB RMB: Recommended minimumnavigation informationGPRMC RMC: Recommended minimumspecific GNSS dataGPRTE RTE: RoutesGPVTG VTG: Course over ground andground speedGPWPL WPL: Waypoint locationGPXTE XTE: Cross track errorPGRME E: Estimated errorPGRMM M: Map datumPGRMZ Z: AltitudeSDDBT DBT: Depth below transducerSDDPT DPT: DepthSDMTW MTW: Water temperatureSDVHW VHW: Water speed andheadingReceive DPT DepthDBT Depth below transducerMTW Water temperatureVHW Water speed and headingWPL Waypoint locationDSC Digital selective callinginformationDSE Expanded digital selectivecallingHDG Heading, deviation, andvariationHDM Heading, magneticMWD Wind direction and speedMDA Meteorological compositeMWV Wind speed and angleVDM AIS VHF data-link messageYou can purchase complete information about National MarineElectronics Association (NMEA) format and sentences from: NMEA,Seven Riggs Avenue, Severna Park, MD 21146 USA(www.nmea.org)NMEA 2000 PGN InformationType PGN DescriptionTransmit andreceive059392 ISO acknowledgment059904 ISO request060928 ISO address claim126208 NMEA: Command, request, andacknowledge group function126464 Transmit and receive PGN list groupfunction126996 Product information127250 Vessel heading128259 Speed: Water referencedType PGN Description128267 Water depth130306 Wind data130312 TemperatureTransmit 127258 Magnetic Variance129025 Position: Rapid update129026 COG and SOG: Rapid update129029 GNSS position data129283 Cross track error129284 Navigation data129285 Navigation route and waypoint info129539 GNSS DOPs129540 GNSS satellites in viewReceive 127245 Rudder127250 Vessel heading127488 Engine parameters: Rapid update127489 Engine parameters: Dynamic127493 Transmission parameters: Dynamic127498 Engine parameters: Static127505 Fluid level129038 AIS class A position report129039 AIS class B position report129040 AIS class B extended position report129794 AIS class A static and voyage relateddata129798 AIS SAR aircraft position report129799 Radio frequency, mode, and power129802 AIS safety-related broadcastmessage129808 DSC call information130310 Environmental parameters130311 Environmental parameters (obsolete)130313 Humidity130314 Actual pressure130576 Small craft statusThis data applies only to NMEA 2000-compatible products.Appendix 31
IndexAaerial photos 4AIS 4, 6, 7alarm 5distress signal device 6radar 17SART 6targeting 5, 6threats 5, 17turning on 29vessels 5alarms 27anchor drag 27arrival 27collision 5deep water 15engine 12gauges 13navigation 27off course 27shallow water 15sonar 15water temperature 15weather 28anchor drag alarm 27animated currents, tides 4arrival alarm 27Auto Guidance 9, 28line 28shoreline distance 28autopilot 9Bbacklight 1buoy reports 24Ccelestial information 14charts 2, 4, 6appearance 7details 3heading line 7navigation 3, 4orientation 7panning 2symbols 2clock 27alarm 27collision alarm 5color mode 1combinations 12customizing 12selecting 12compass 12compass roses 6compass tape data bar 7courses 8current stations 14indicators 4Ddatabackup 30copying 29data fields 7data management 29deleting, all user data 12depth log 16destinationsnavigation chart 8selecting 8devicekeys 1, 2registration 30digital selective calling 20, 21channels 21contacts 20individual routine call 21turning on 20, 29distress call 20distress signal device 6DSC. See digital selective callingEEBL 17adjusting 18measuring 18showing 18EGNOS 25engine gauges 12, 13configuring 13status alarms 12environment gauges 14environmental gauges 13, 14EPIRB 6event log 25Ffactory settings 29Fish Eye 3Dsonar cone 8suspended targets 8tracks 8fishing chart 2, 24panning 2setup 6fuel alarm 13, 27fuel capacity 13, 25fuel gauges 12, 13configuring 13status alarm 13, 27synchronizing with actual fuel 13, 25fuel onboard 25Ggaugesengine 12, 13engines 13environment 14environmental data 13, 14fuel 12, 13limits 12status alarms 12, 13trip 12wind 13GLONASS 25Go To 9GPSEGNOS 25GLONASS 25signals 1WAAS 25GPS accuracy 27Hhazard colors 7home screen, customizing 1Kkeel offset 25, 26keys 1power 1Llane width 7language 25locking, screen 1Mman overboard 9marine services 8mark location 9memory card 29, 30detailed maps 30installing 2slot 1MOB, device 6music player 22, 25Nnavaids 3navigation alarms 27navigation chart 2, 4, 8, 24aerial photos 6marine service points 8panning 2radar overlay 18setup 6vessel trails 7, 21navigation inset 7NMEA 0183 20, 26, 27, 30NMEA 2000 20, 26, 27, 31Ooff course alarm 27offset, front of boat 20other vesselsAIS 7trails 7overlay numbers 7PPerspective 3D 24photos, aerial 4position report 21position tracking 20power key 1, 25premium charts 3, 4aerial photos 4Fish Eye 3D 8tide and current indicators 4product registration 30Rradar 16AIS 17clutter 19color scheme 19field of view 19front-of-boat offset 20gain 18optimizing display 18, 19overlay screen 18range 18range rings 19sentry mode 17timed transmit 17transmitting 16waypoints 17, 19zoom scale 16radar overlay 18radio, SiriusXM 25range rings 7registering the device 30routescopying 29creating 10deleting 11editing 10navigating 10navigating parallel to 10viewing list of 10waypoints 2932 Index
Ssafe depth 28safe height 28safe zone collision alarm 5SART 6satellite imagery 4satellite signals, acquiring 1screenbrightness 1locking 1screenshots 30capturing 30sentry mode 17guard zone 17timed transmit 17settings 25, 26, 28radar display 19system information 25, 29shoreline distance 28SiriusXM 22SiriusXM Satellite Radio 25software, updating 30sonar 14a-scope 15alarms 15appearance 15bottom lock 15cone 8depth 15depth line 15depth scale 15frequencies 15gain 15interference 15noise 15overlay numbers 15recording 16scroll speed 15suspended targets 15views 14, 15waypoint 15whiteline 15zoom 15SOS 9suspended targets 8symbols 5system information 25, 29, 30Ttide stations 4, 14indicators 4touchscreen 1calibrating 30tracks 11clearing 11copying 29deleting 11editing 11list 11navigating 11recording 11, 12saving 11saving as route 11showing 6, 11transducer 14trip gauges 12Uunit ID 25, 29units of measure 28updates, software 30user data, deleting 12Vvessel trails 7, 21VHF radio 20calling an AIS target 21distress calls 20DSC channel 21individual routine call 21individual routine calling 21video 21configuring 21voltage 27volume, adjusting 25VRM 17adjusting 18measuring 18showing 18WWAAS 25waterspeed 26temperature offset 26water temperature log 16waypoints 9copying 29creating 9, 24deleting 10editing 9man overboard 9navigating to 9radar 17showing 6sonar 15tracked vessel 21viewing list of 9weather 24weather 6, 22, 23alarms 28broadcasts 22charts 24fishing 24fishing chart 25forecast 22–24navigation chart 24overlay 24, 25precipitation 22sea conditions 23, 24subscription 22, 25surface pressure 24visibility 24water temperature 24wave information 23winds 23wind gauges 13wireless devices 27Bluetooth devices 27connecting a wireless device 27network configuration 27Zzoomchart 2radar 16sonar 15Index 33
www.garmin.com/support913-397-82001-800-800-10200808 238 0000+44 870 850 1242 1-866-429-9296 +43 (0) 820 220 230+32 2 672 52 54 +45 4810 5050 +358 9 6937 9758 + 331 55 69 33 99+49 (0)1805-427646-880 + 39 02 36 699699 0800 - 023 3937035 - 539 3727 + 47 815 69 55500800 4412 454+44 2380 662 915 + 35 1214 447 460 + 34 902 007 097 + 46 7744 52020Garmin International, Inc.1200 East 151st StreetOlathe, Kansas 66062, USAGarmin (Europe) Ltd.Liberty House, Hounsdown Business ParkSouthampton, Hampshire, SO40 9LR UKGarmin CorporationNo. 68, Zhangshu 2nd Road, Xizhi Dist.New Taipei City, 221, Taiwan (R.O.C.)© 2013 Garmin Ltd. or its subsidiaries

Navigation menu