Garmin 02643 Low Power Transmitter 2402-2480 MHz User Manual

Garmin International Inc Low Power Transmitter 2402-2480 MHz

UserManual.wiki >

02643 User Manual >

Contents

1. User Manual 1
2. User Manual 2

User Manual 1

A02643Quick Start ManualDRAFT

Introduction WARNINGSee the Important Safety and ProductInformation guide in the product box for productwarnings and other important information.Always consult your physician before you beginor modify any exercise program.Charging the Device WARNINGThis device contains a lithium-ion battery. Seethe Important Safety and Product Informationguide in the product box for product warningsand other important information.NOTICETo prevent corrosion, thoroughly clean and drythe contacts and the surrounding area beforecharging or connecting to a computer. Refer tothe cleaning instructions in the owner's manual.1Plug the USB cable into a USB port onyour computer.2Align the charger posts with the contactson the back of the device, and press thecharger À until it clicks.2 IntroductionDRAFT

3Charge the device completely.Installing the Standard MountFor the best GPS reception, position the mount so the front of the device is orientedtoward the sky. You can install the mount..1Select a secure location to mount thedevice where it does not interfere with safe operation.2Place the rubber disk À on the back of themount.The rubber tabs align with the back of themount so it stays in place.3Place the mount on the stem.4Attach the mount securely using thetwo bands Á.5Align the tabs on the back of the devicewith the mount notches Â.6Press down slightly until it locks..Introduction 3DRAFT

Releasing the GHYLFH1Turn the device clockwise to unlock thedevice.2Lift the device off the mount.KeysÀSelect to turn the backlight on andoff.Hold to turn the device on and off.ÁSelect to start and stop the timer.Select to choose an option or toacknowledge a message.ÂSelect to scroll through the datascreens, options, and settings.From the home screen, select toview the device menu.4 IntroductionDRAFT

ÃSelect to mark a new lap.Select to return to the previousscreen.Using the deviceIf your device was packaged with anANT+® sensor, they are already paired and canbe activated during initial setup.1Hold to turn on the device.2Go outside, and wait while the devicelocates satellites.The satellite bars are solid when the deviceis ready.3From the home screen, select .4Select to start the timer.NOTE: History is recorded only while thetimer is running.5Select for additional data pages.6Select to stop the timer.7Select Save.Using Garmin Connect™You can upload all of your activity data toGarmin Connect for comprehensive analysis.With Garmin Connect, you can view a map ofyour activity, and share your activities withfriends.1Connect the device to your computer usingthe USB cable.2Go to www.garminconnect.com/start.3Follow the on-screen instructions.Introduction 5DRAFT

CoursesYou can send a course from your GarminConnect account to your device. After it issaved to your device, you can navigate thecourse on your device.You can follow a saved course simply becauseit is a good route. For example, you can saveand follow a friendly commute to work.You can also follow a saved course, trying tomatch or exceed previously set performancegoals. For example, if the original course wascompleted in 30 minutes, you can race againsta Virtual Partner® trying to complete the coursein under 30 minutes.Following a Course From the WebBefore you can download a course from yourGarmin Connect account, you must have aGarmin Connect account (page 5).1Connect the device to your computer usingthe USB cable.2Go to www.garminconnect.com.3Create a new course, or select an existingcourse.4Select Send to Device.5Disconnect the device, and turn it on.6Select > Courses.7Select a course.8Select Do Course.9Select to start the timer.The map displays the course and aprogress bar at the top of the screen.6 IntroductionDRAFT

10 If necessary, select for additional datapages.ANT+ SensorsThe device can be used with wirelessANT+ sensors. For more information aboutcompatibility and purchasing optional sensors,go to http://buy.garmin.com.Putting On the Optional Heart RateMonitorYou should wear the heart rate monitor directlyon your skin, just below your sternum. It shouldbe snug enough to stay in place during youractivity.1Push one tab À of the strap through theslot Á in the heart rate monitor module.2Press the tab down.3Wet the electrodes Â on the back of themodule to create a strong connectionbetween your chest and the heart ratemonitor module.4Wrap the strap around your chest andattach it to the other side of the heart ratemonitor module.ANT+ Sensors 7DRAFT

DRAFT

DRAFT

DRAFT