Garmin 02643 Low Power Transmitter 2402-2480 MHz User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2652381
Application ID	MVhaaVR71nv2b9j1WpjGYQ==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	82.27kB (1028393 bits)
Date Submitted	2015-06-18 00:00:00
Date Available	2015-07-09 00:00:00
Creation Date	2015-03-05 15:37:16
Producing Software	Antenna House PDF Output Library 6.2.625 (Windows (x64))
Document Lastmod	2015-05-06 14:10:51
Document Title	Untitled
Document Creator	AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)

A02643
AF
Quick Start Manual
Introduction
WARNING
See the Important Safety and Product
Information guide in the product box for product
warnings and other important information.
Always consult your physician before you begin
or modify any exercise program.
Charging the Device
WARNING
This device contains a lithium-ion battery. See
the Important Safety and Product Information
guide in the product box for product warnings
and other important information.
Plug the USB cable into a USB port on
your computer.
Align the charger posts with the contacts
on the back of the device, and press the
charger À until it clicks.
AF
NOTICE
To prevent corrosion, thoroughly clean and dry
the contacts and the surrounding area before
charging or connecting to a computer. Refer to
the cleaning instructions in the owner's manual.
Introduction
3
Charge the device completely.
Installing the Standard Mount
AF
For the best GPS reception, position the
mount so the front of the device is oriented
toward the sky. You can install the mount.
1 Select a secure location to mount the
device where it does not interfere with
safe operation.
2 Place the rubber disk À on the back of the
mount.
The rubber tabs align with the back of the
mount so it stays in place.
Place the mount on the stem.
Attach the mount securely using the
two bands Á.
Align the tabs on the back of the device
with the mount notches Â
Press down slightly until it locks.
Introduction
Releasing the GHYLFH
1 Turn the device clockwise to unlock the
device.
2 Lift the device off the mount.
AF
Keys
À
Á
Â
Select to turn the backlight on and
off.
Hold to turn the device on and off.
Select to start and stop the timer.
Select to choose an option or to
acknowledge a message.
Select to scroll through the data
screens, options, and settings.
From the home screen, select to
view the device menu.
Introduction
Select to mark a new lap.
Select to return to the previous
screen.
Ã
Using the device
If your device was packaged with an
ANT+ sensor, they are already paired and can
be activated during initial setup.
1 Hold to turn on the device.
®
Select
AF
Select
to start the timer.
NOTE: History is recorded only while the
timer is running.
Select for additional data pages.
to stop the timer.
Go outside, and wait while the device
locates satellites.
The satellite bars are solid when the device
is ready.
From the home screen, select .
Select Save.
Using Garmin Connect™
You can upload all of your activity data to
Garmin Connect for comprehensive analysis.
With Garmin Connect, you can view a map of
your activity, and share your activities with
friends.
1 Connect the device to your computer using
the USB cable.
2 Go to www.garminconnect.com/start.
Follow the on-screen instructions.
Introduction
Courses
You can send a course from your Garmin
Connect account to your device. After it is
saved to your device, you can navigate the
course on your device.
You can follow a saved course simply because
it is a good route. For example, you can save
and follow a friendly commute to work.
You can also follow a saved course, trying to
match or exceed previously set performance
goals. For example, if the original course was
completed in 30 minutes, you can race against
a Virtual Partner trying to complete the course
in under 30 minutes.
Following a Course From the Web
Before you can download a course from your
Garmin Connect account, you must have a
Garmin Connect account (page 5).
1 Connect the device to your computer using
the USB cable.
2 Go to www.garminconnect.com.
Create a new course, or select an existing
course.
Select Send to Device.
AF
®
Disconnect the device, and turn it on.
Select
> Courses.
Select a course.
Select Do Course.
Select
to start the timer.
The map displays the course and a
progress bar at the top of the screen.
Introduction
10 If necessary, select
pages.
for additional data
ANT+ Sensors
The device can be used with wireless
ANT+ sensors. For more information about
compatibility and purchasing optional sensors,
go to http://buy.garmin.com.
Putting On the Optional Heart Rate
Monitor
Press the tab down.
AF
You should wear the heart rate monitor directly
on your skin, just below your sternum. It should
be snug enough to stay in place during your
activity.
1 Push one tab À of the strap through the
slot Á in the heart rate monitor module.
Wet the electrodes  on the back of the
module to create a strong connection
between your chest and the heart rate
monitor module.
Wrap the strap around your chest and
attach it to the other side of the heart rate
monitor module.
ANT+ Sensors
The Garmin logo should be right-side up.
5 Bring the device within 3 m (10 ft.) of the
heart rate monitor.
After you put on the heart rate monitor, it is
active and sending data.
®
Device Information
Temperature Specifications
AF
More Information
Operating temperature range: From
-15º to 60ºC (from 5º to 140ºF)
Charging temperature range: From 0º
to 45ºC (from 32º to 113ºF)
Heart rate monitor operating temperature
range: From -10° to 50°C (from 14° to
122°F)
Your owner's manual contains details about
additional features. Go to
www.garmin.com/manuals/.
•
Notifications
• Training options
• Customizing your device
®
Device Information
T
AF
T
AF
T
AF
Garmin , the Garmin logo, ANT+ are
trademarks of Garmin Ltd. or its subsidiaries, registered in
the USA and other countries. Garmin Connect™ is a
trademark of Garmin Ltd. or its subsidiaries. These
trademarks may not be used without the express
permission of Garmin.
The Bluetooth word mark and logos are owned by the
Bluetooth SIG, Inc. and any use of such marks by Garmin
is under license. Other trademarks and trade names are
those of their respective owners.
M/N: A02643
®
®
AF
®
© 2015 Garmin Ltd. or its subsidiaries
www.garmin.com/support
Printed in Taiwan
March 2015
190-01884-90_0A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2015:03:05 15:37:16-06:00
Creator                         : AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)
Modify Date                     : 2015:05:06 14:10:51-05:00
Subject                         : 
Trapped                         : False
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
GTS PDFX Version                : PF_PDFX_3_2003
Document ID                     : uuid:f48b2219-5963-7e66-f017-7768844b1f1e
Version ID                      : 1
Rendition Class                 : default
Instance ID                     : uuid:366549e9-72fe-4bc2-9012-204b4f5aa8e0
Producer                        : Antenna House PDF Output Library 6.2.625 (Windows (x64))
Creator Tool                    : AH XSL Formatter V6.2 MR5 for Windows (x64) : 6.2.7.18952 (2014/11/12 16:18JST)
Metadata Date                   : 2015:05:06 14:10:51-05:00
Format                          : application/pdf
Description                     : 
Title                           : Untitled
Page Layout                     : SinglePage
Page Count                      : 12

EXIF Metadata provided by EXIF.tools