Garmin 02913 Low Power Transmitter 2402-2480 MHz User Manual

Garmin International Inc Low Power Transmitter 2402-2480 MHz Users Manual

UserManual.wiki >

02913 User Manual >

Contents

1. Users Manual 1
2. Users Manual

Users Manual

InstructionsIntroduction WARNINGSee the Important Safety and ProductInformation guide in the product box for productwarnings and other important information.Charging the DeviceNOTICETo prevent corrosion, thoroughly clean and drythe contacts and the surrounding area beforecharging or conn cting a computer. Refer tothe cleaning instructions n the owner's manual.The device is powered by a built-in lithium-ionbattery that yo can charge using a standardwall outlet or a USB port on your computer.NOTE: The device does not charge whenoutside the approved temperature range(page 5).1Pinch the buttons À on the charger.2Align the charger posts with the contactson the back of the device Á, and press thecharger until it clicks.DRAFT

3Release the buttons.4Plug the large end of the USB cable into anAC adapter or a computer USB port.5Plug the AC adapter into a standard walloutlet.6Charge the device completely.Device OverviewÀPower key Hold t turn the device onand off.ÁAmbientlight sens rAutomatically detectsavailable light and adjuststhe brightness of thedisplay.ÂTouchpanelSwipe to scroll through datascreens, options, andsettings (page 2).ÃLens Adjustable magnifying lensdisplay.Using the Touch PanelYou can use the touch panel to interact withmany device features. You can operate the2DRAFT

touch panel with your finger tip or while wearinggloves.• Swipe the touch panel to scroll throughdata screens, options, and settings.You can swipe from left to right or right toleft.• Swipe the touch panel to dismissnotifications.• Tap the touch panel to select highlightedoptions.• Tap the touch panel to acknowledgenotifications and alerts.• Double-tap the touch panel to wake up andput the device into sleep mode.Installing the Mount 1Select a band size that fi s NOTE: The band should be tight so thedevice does not move.2Place the flat side of the mount against thearm.3Hook the fi st band on the top knob andpull it a und the arm.4Hook the other side of the band on thebottom knob.3DRAFT

5Repeat steps 2 and 3 for the second band.Installing the Device on the MountBefore you can install the device on the mount,you must install the mount on your arm1Align the notches on the mount and thedevice.2Press down slightly and turn the d viceuntil it locks into place3Adjust the front of the displayDRAFT

Pairing the Device withYour Garmin® DevicePairing is the process of connecting an ANT+®accessory, such as the device,with a Garmin ANT+ compatible device such asthe Edge 1000.NOTE: The pairing instructions differ for eachGarmin compatible device. See your owner'smanual.• Bring the Garmin compatible device within3 m of the ANT+ accessory.• Stay 10 m away from other ANT+ sensorswhile pairing.After you pair the first time, your Garmincompatible device automatically recognizes theANT+ accessory each time it is activated.Device InformationSpecificationsBattery type Rechargeable, built-inlithium-ion batteryBattery life Up to 8 hr.Water rating IEC 60529 IPX7*OperatingtemperaturerangeFrom -20º to 60ºC (from -4ºto 140ºF)ChargingtemperaturerangeFrom 0º to 45ºC (from 32ºto 113ºF)Radio frequency/protocol2.4 GHz ANT+ wirelesscommunications protocol5DRAFT

*The device withstands incidental exposure towater of up to 1 m for up to 30 min. For moreinformation, go to www.garmin.com/waterrating.Support and UpdatesGarmin Express™ (www.garmin.com/express)provides easy access to these services forGarmin devices.•Product registration• Product manuals• Software updatesGetting the Owner's ManualThe owner's manual includes instructions forusing device features and accessing egulatoryinformation.Go to www.garmin.com/manuals.6DRAFT