Garmin 03321 Digital Transmission System 2412-2462 MHz User Manual 1

Garmin International Inc Digital Transmission System 2412-2462 MHz 1

UserManual.wiki >

03321 User Manual >

Contents

User Manual 1

Viewing Previous Routes and DestinationsBefore you can use this feature, you must enable the travel history feature (Device and Privacy Settings, page 20).You can view your previous routes and places you have stopped on the map.Select Apps > Where I've Been.dēzl SettingsMap and Vehicle SettingsSelect Settings > Map & Vehicle.Vehicle: Sets the vehicle icon that represents your position on the map.Driving Map View: Sets the perspective on the map.Map Detail: Sets the level of detail on the map. More detail may cause the map to draw slower.Map Theme: Changes the color of the map data.Map Tools: Sets the shortcuts that appear in the map tools menu.Map Layers: Sets the data that appears on the map page (Customizing the Map Layers, page 10).Auto Zoom: Automatically selects the zoom level for optimal use of your map. When disabled, you must zoom in or out manually.myMaps: Sets which installed maps the device uses.Enabling MapsYou can enable map products installed on your device.TIP: To purchase additional map products, go to http://buy.garmin.com.1Select Settings > Map & Vehicle > myMaps.2Select a map.Navigation SettingsSelect Settings > Navigation.Route Preview: Shows a preview of the major roads in your route when you start navigation.Calculation Mode: Sets the route calculation method.Break Planning: Shows suggested break times based on your drive time.Avoidances: Sets road features to avoid on a route.Custom Avoidances: Allows you to avoid specific roads or areas.Toll Roads: Sets preferences for avoiding toll roads.Tolls and Fees: Sets preferences for avoiding toll roads and toll stickers.NOTE: This feature is not available in all areas.Environmental Zones: Sets the avoidance preferences for areas with environmental or emissions restrictions that may apply to your vehicle.Restricted Mode: Disables all functions that require significant operator attention.GPS Simulator: Stops the device from receiving a GPS signal, and saves battery power.Calculation Mode SettingsSelect Settings > Navigation > Calculation Mode.The route calculation is based on road speeds and vehicle acceleration data for a given route.Faster Time: Calculates routes that are faster to drive but can be longer in distance.Shorter Distance: Calculates routes that are shorter in distance but can take more time to drive.Off Road: Calculates a direct line from your location to your destination.Setting a Simulated LocationIf you are indoors or not receiving satellite signals, you can use the GPS simulator to plan routes from a simulated location.1Select Settings > Navigation > GPS Simulator.2From the main menu, select View Map.3Tap the map twice to select an area.The address of the location appears at the bottom of the screen.4Select the location description.5Select Set Location.Wireless Network SettingsThe wireless network settings allow you to manage Wi‑Fi®networks, paired Bluetooth devices, and Bluetooth features.Select Settings > Wireless Networks.Wireless Networks: Enables Bluetooth wireless technology.Paired Device Name: The names of paired Bluetooth devices appear in the menu. You can select a device name to change Bluetooth feature settings for that device.Search for Devices: Searches for nearby Bluetooth devices.Friendly Name: Allows you to enter a friendly name that identifies your device on other devices with Bluetooth wireless technology.Wi-Fi: Enables the Wi‑Fi radio.Saved Networks: Allows you to edit or remove saved networks.Search for Networks: Searches for nearby Wi‑Fi networks (Connecting to a Wi‑Fi Network, page 21).Driver Assistance SettingsSelect Settings > Driver Assistance.Audible Driver Alerts: Enables an audible alert for each type of driver alert (Driver Awareness Features and Alerts, page 2).Fatigue Warning: Alerts you when you have been driving for a long period without a break.Proximity Alerts: Alerts you when you are near custom points of interest or red light cameras.NOTE: You must have custom points of interest (POIs) loaded for proximity points alerts to display. This feature is not available in all areas.Backup Camera SettingsThe backup camera settings allow you to manage paired Garmin backup cameras and camera settings. This menu appears on your navigation device only when the device is connected to a wireless camera receiver cable. See the owner's manual for your backup camera for detailed information about pairing cameras and camera settings. Go to garmin.com/backupcamera to purchase a Garmin backup camera.Select Settings > Backup Camera, and select a paired camera.Unpair: Removes the paired camera. You must pair the camera again before you can view it using this device and cable.Rename: Allows you to rename the paired camera.Guidance Lines: Shows or hides guidance lines and allows you to adjust the position of the guidance lines.Display SettingsSelect Settings > Display.dēzl Settings 19

NOTE: If a map update is too large for the internal storage of the device, the software may prompt you to install a microSD®card in your device to add storage space (Installing a Memory Card for Maps and Data, page 23).The Garmin Express software downloads and installs the updates onto your device. Map updates are very large, and this process may take a long time on slower Internet connections.Device CareNOTICEAvoid dropping your device.Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.Never use a hard or sharp object to operate the touchscreen, or damage may result.Do not expose the device to water.Cleaning the Outer CasingNOTICEAvoid chemical cleaners and solvents that can damage plastic components.1Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent solution.2Wipe the device dry.Cleaning the Touchscreen1Use a soft, clean, lint-free cloth.2If necessary, lightly dampen the cloth with water.3If using a dampened cloth, turn off the device and disconnect the device from power.4Gently wipe the screen with the cloth.Avoiding Theft• Remove the device and mount from sight when not in use.• Remove the residue left on the windshield by the suction cup.• Do not keep your unit in the glove compartment.• Register your device using the Garmin Express software (garmin.com/express).Resetting the DeviceYou can reset your device if it stops functioning.Hold the power key for 12 seconds.Removing the Device, Mount, and Suction CupRemoving the Device from the Mount1Press the release tab or button on the mount.2Tilt the bottom of the device upward, and lift the device from the mount.Removing the Mount from the Suction Cup1Turn the device mount to the right or left.2Apply pressure until the socket on the mount releases the ball on the suction cup.Removing the Suction Cup from the Windshield1Flip the lever on the suction cup toward you.2Pull the tab on the suction cup toward you.Changing the Fuse in the Vehicle Power CableNOTICEWhen replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper position. The vehicle power cable does not work unless it is assembled correctly.If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter.1Rotate the end piece À counter clockwise to unlock it.TIP: You may need to use a coin to remove the end piece.2Remove the end piece, the silver tip Á, and the fuse Â.3Insert a new fast-blow fuse that has the same current, such as 1 A or 2 A.4Place the silver tip in the end piece.5Push in the end piece and rotate it clockwise to lock it back into the vehicle power cable Ã.TroubleshootingThe suction cup will not stay on my windshield1Clean the suction cup and windshield with rubbing alcohol.2Dry with a clean, dry cloth.3Mount the suction cup (Mounting and Powering the dēzl Device in Your Vehicle, page 1).My device is not acquiring satellite signals• Verify the GPS simulator is turned off (Navigation Settings, page 19).• Take your device out of parking garages and away from tall buildings and trees.• Remain stationary for several minutes.The device does not charge in my vehicle• Check the fuse in the vehicle power cable (Changing the Fuse in the Vehicle Power Cable, page 22).• Verify the vehicle is turned on and is supplying power to the power outlet.• Verify the interior temperature of the vehicle is within the charging temperature range indicated in the specifications.• Verify the fuse is not broken in the vehicle power outlet.My battery does not stay charged for very long• Decrease the screen brightness (Display Settings, page 19).• Shorten the display timeout (Display Settings, page 19).22 Troubleshooting

Purchasing AccessoriesGo to garmin.com/accessories.24 Appendix

IndexSymbols2-D map view 113-D map view 11Aaccessories 24active lane guidance 4addresses, finding 8alertsaudio 19proximity points 19answering calls 13audio, proximity points 19, 20automatic volume, enabling 2avoidances 5area 6deleting 6disabling 6road 6road features 5tolls 5Bbackup camera 19batterycharging 1, 20, 22maximizing 22problems 22Bluetooth technology 11, 12, 23disconnecting a device 14pairing a phone 11settings 19Bluetooth Technology 11disabling calls 13managing phones 13break planning 15brightness 2Ccalls 12, 13answering 13contacts 12dialing 12history 13home 13placing 12camerasbackup 19red light 3speed 3changing the search area 7charging the device 1, 20, 22cleaning the device 22cleaning the touchscreen 22computer, connecting 23connecting 21coordinates 8current location 8, 9Ddeletingpaired Bluetooth device 14service categories 16service records 16trips 18destinations 19. See locationsarriving 4detours 5device care 22dialing 12directions 4disconnecting, Bluetooth device 14Dispatch and Track 15display settings 19driver alerts 2, 3driving directions 4Eediting, saved trips 18emergency services 8EULAs 20exportingjurisdiction summaries 16trip reports 16Ffiles, transferring 23finding locations. 6–8, 12 See also locationsaddresses 8categories 6cities 8coordinates 8intersections 8Foursquare 8fuel, stations 8fuel data 15, 16fuse, changing 22GGarmin Connect 11Garmin Express, updating software 21Garmin Live Services 11subscribing to 11geocaching 8going home 3GPS 1, 23Hhands-free phone calls 11, 13homecalling 13editing location 4going 3phone number 13Iicons, status bar 1ID number 20International Fuel Tax Agreement (IFTA) 15exported summaries and reports 16fuel data 15, 16jurisdiction summary 16trip reports 16intersections, finding 8Jjurisdiction summary 16Kkeyboardlanguage 20layout 20Llanguagekeyboard 20voice 20latitude and longitude 8location 7locations 8, 19calling 12current 8, 9recently found 8saving 9searching for 6, 8simulated 19venues 7Mmap layers, customizing 10map view2-D 113-D 11maps 3, 9, 10, 19data field 4, 10detail level 19layers 10purchasing 23symbols 4theme 19tools 9, 10truck 17updating 21viewing routes 4memory card 1, 23installing 23microSD card 1, 23mount, removing 22mounting the deviceautomobile 1removing from mount 22suction cup 1, 22muting, audio 17myTrends, routes 5Nnavigation 4, 7off-road 6settings 19next turn 4notifications 11–13Ooff-road navigation 6on-screen buttons 2owner's manual 17Ppairingdisconnecting 14phone 11, 23parking 4, 7, 8last spot 4phonedisconnecting 14pairing 11, 23phone book 12phone calls 12answering 13dialing 13muting 13voice dial 13photoLive 18points of interest (POI) 6–8venues 7power cables 20changing the fuse 22vehicle 1power key 1product support 17profilesactivating 2truck 2proximity points alerts, settings 20QQuick Search 6Rrecently found locations 8red light cameras 3removing mount 22reports, trip 16resettingdevice 22trip data 10restoring settings 20restrictions, vehicle 2road conditions, weather 17routes 3adding a point 4, 18calculating 5calculation mode 18, 19myTrends 5shaping 5starting 3, 7stopping 5suggested 5viewing on the map 4Index 25

Navigation menu