Garmin A2AMGB LOW POWER TRANSMITTER (2400-2483.5 MHz) User Manual 1

Garmin International Inc LOW POWER TRANSMITTER (2400-2483.5 MHz) Users Manual 1

Contents

Users Manual 1

zūmo® 300 SeriesOwner’s ManualModels: zumo 340, 350March 2012 190-01457-00 Printed in Taiwan
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.TracBack®, Garmin®, the Garmin logo, and zūmo® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. BaseCamp™, HomePort™, myGarmin™, myTrends™, nüMaps Guarantee™, nüMaps Lifetime™, and trafficTrends™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. microSD™ is a trademark of SD-3C. Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United States and/or other countries. Mac® is a trademark of Apple Computer, Inc.HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio® and the HD logo are proprietary trademarks of iBiquity Digital Corporation.
Table of ContentsGetting Started............................................................... 1Mounting Your Device in a Motorcycle...................................... 1About the Powered Mount Cables........................................ 1Installing the Handlebar Base............................................... 1Attaching the Power Cables to the Motorcycle Mount.......... 1Attaching the Base Plate to the Motorcycle Mount............... 2Attaching the Base Plate to the Handlebar Base.................. 2Installing Your Device in the Motorcycle Mount.................... 2Removing Your Device from the Motorcycle Mount................... 2Mounting Your Device in an Automobile.................................... 2About myDashboard.................................................................. 3Setting Up myDashboard...................................................... 3Registering the Device.......................................................... 3Updating the Software........................................................... 3nüMaps Guarantee™............................................................ 3Updating Maps...................................................................... 3Turning Off the Device............................................................... 3Resetting the Device............................................................. 3About Sleep Mode..................................................................... 3Entering Sleep Mode............................................................. 3Exiting Sleep Mode............................................................... 3Adjusting the Screen Brightness................................................ 3Adjusting the Volume................................................................. 3Status Bar Icons......................................................................... 3Acquiring GPS Signals.......................................................... 3Transportation Modes........................................................... 3Battery Information................................................................ 3Setting the Time.................................................................... 4Using the On-Screen Buttons.................................................... 4Using the On-Screen Keyboard................................................. 4About Shortcuts......................................................................... 4Adding a Shortcut Icon.......................................................... 4Removing a Shortcut............................................................. 4Finding Locations.......................................................... 4About Locations......................................................................... 4Finding a Location by Category............................................ 4Finding a Location Using the Search Bar.............................. 4Changing the Search Area.................................................... 4Reporting a Closed or Missing Location............................... 4Rating a Point of Interest....................................................... 5About Search Tools................................................................... 5Finding an Address............................................................... 5Finding an Intersection.......................................................... 5Finding a City........................................................................ 5Finding a Location Using Coordinates.................................. 5Finding a Location by Browsing the Map.............................. 5Saving a Home Location............................................................ 5Going Home.......................................................................... 5Editing Your Home Location Information.............................. 5Finding Recently Found Destinations........................................ 5Clearing the List of Recently Found Locations...................... 5Finding Parking.......................................................................... 5Finding Your Last Parking Spot............................................ 5Setting a Simulated Location..................................................... 5Saving Locations........................................................................ 6Saving a Location.................................................................. 6Saving Your Current Location............................................... 6Starting a Route to a Saved Location................................... 6Editing a Saved Location...................................................... 6Assigning Categories to a Saved Location........................... 6Sharing a Saved Location..................................................... 6Sending a Location to the Device......................................... 6Loading Photos for Navigation.............................................. 6Deleting a Saved Location.................................................... 6Navigation.......................................................................6Starting a Route......................................................................... 6Changing the Route Calculation Mode................................. 6Previewing Multiple Routes................................................... 6Starting a Route to a Saved Location................................... 6Your Route on the Map.............................................................. 7Using the Navigation Map..................................................... 7Adding a Point to a Route..................................................... 7Taking a Detour..................................................................... 7Stopping the Route............................................................... 7Updating Speed Limits.......................................................... 7Using Suggested Routes...................................................... 7About Exit Services.................................................................... 7Finding Exit Services............................................................. 7Navigating to an Exit............................................................. 7Avoiding Road Features............................................................ 7About Custom Avoidances......................................................... 7Avoiding an Area................................................................... 7Avoiding a Road.................................................................... 7Disabling a Custom Avoidance............................................. 7Deleting Custom Avoidances................................................ 8Enabling Advanced Detours...................................................... 8Taking a Detour Around Specified Areas.............................. 8Navigating Off Road................................................................... 8Map Pages...................................................................... 8Customizing the Map................................................................. 8Customizing the Map Layers................................................. 8Viewing the Trip Log............................................................. 8Changing the Map Data Field............................................... 8Customizing Map Buttons..................................................... 8Changing the Map Dashboard.............................................. 8Changing the Map Perspective............................................. 8Viewing Turns............................................................................ 8Viewing a List of Turns.......................................................... 8Viewing the Next Turn........................................................... 8Viewing Junctions................................................................. 8Viewing Traffic Alerts............................................................ 8Viewing Trip Information....................................................... 9Viewing Current Location Information........................................ 9Finding Nearby Services....................................................... 9Getting Directions to Your Current Location......................... 9Hands-Free Voice Prompts........................................... 9About Wireless Headsets........................................................... 9Enabling Bluetooth Wireless Technology.............................. 9Pairing a Wireless Headset........................................................ 9Deleting a Paired Headset.................................................... 9Disconnecting Your Headset................................................. 9Tips After Pairing the Devices............................................... 9Using the Apps...............................................................9Using Help................................................................................. 9Searching Help Topics.......................................................... 9Planning a Trip........................................................................... 9Scheduling a Trip.................................................................. 9Changing Transportation Modes in a Trip........................... 10Navigating to a Saved Trip.................................................. 10Editing a Saved Trip............................................................ 10TracBack®............................................................................... 10Following Your Recent Track.............................................. 10Saving Your Recent Track as a Trip................................... 10Using the Compass.................................................................. 10Viewing Previous Routes and Destinations............................. 10Logging Service History........................................................... 10Adding Service Categories.................................................. 10Deleting Service Categories................................................ 10Table of Contents i
Deleting Service Records.................................................... 10Editing a Service Record..................................................... 10Using the World Clock............................................................. 10Viewing the World Map....................................................... 10Setting an Alarm...................................................................... 10Using the Calculator................................................................. 11Converting Units...................................................................... 11Setting Currency Conversion Rates.................................... 11About Offers............................................................................. 11Viewing Offers..................................................................... 11Viewing an Offer List........................................................... 11Disabling Traffic and Offers................................................. 11Using the Language Guide...................................................... 11Purchasing the Language Guide......................................... 11Selecting Languages in the Language Guide..................... 11Translating Words and Phrases.......................................... 11Using a Bilingual Dictionary................................................ 11Traffic............................................................................ 11Receiving Traffic Data.............................................................. 11Traffic Receiver........................................................................ 11About the Traffic Icon.......................................................... 12Traffic on Your Route............................................................... 12Viewing Traffic on Your Route............................................ 12Manually Avoiding Traffic on Your Route............................ 12Taking an Alternate Route.................................................. 12Viewing Traffic on the Map.................................................. 12Traffic in Your Area.................................................................. 12Searching for Traffic Delays................................................ 12Viewing a Traffic Incident on the Map................................. 12Understanding Traffic Data...................................................... 12Traffic Subscriptions................................................................ 12Subscription Activation........................................................ 12Disabling Traffic....................................................................... 12Data Management........................................................ 12About Data Management......................................................... 12File Types................................................................................ 12About Memory Cards............................................................... 12Installing a Memory Card.................................................... 12Connecting the Device to Your Computer............................... 13Transferring Data From Your Computer.................................. 13Disconnecting the USB Cable............................................. 13Deleting Files........................................................................... 13Customizing the Device.............................................. 13Map and Vehicle Settings........................................................ 13Enabling Maps.................................................................... 13Navigation Settings.................................................................. 13Route Preferences.............................................................. 13Display Settings....................................................................... 13Bluetooth Settings.................................................................... 14Managing the Bluetooth Device List.................................... 14Disabling Bluetooth............................................................. 14Traffic Settings......................................................................... 14About Traffic Subscriptions................................................. 14trafficTrends........................................................................ 14Units and Time Settings........................................................... 14Language and Keyboard Settings............................................ 14Device and Privacy Settings.................................................... 14Proximity Alerts Settings.......................................................... 14Restoring Settings.................................................................... 14Appendix.......................................................................14Power Cables........................................................................... 14Charging the Device............................................................ 14About Device Care................................................................... 14Cleaning the Outer Casing.................................................. 15Cleaning the Touchscreen.................................................. 15Avoiding Theft..................................................................... 15Extending the Battery Life................................................... 15Changing the Fuse in the Vehicle Power Cable...................... 15Mounting on Your Dashboard.................................................. 15Removing the Device, Cradle, and Mount............................... 15Removing the Device from the Cradle................................ 15Removing the Cradle from the Mount................................. 15Removing the Suction Cup Mount from the Windshield...... 15Updating Maps......................................................................... 15About nüMaps Lifetime....................................................... 15Purchasing Additional Maps.................................................... 15Safety Cameras....................................................................... 15Custom Points of Interest......................................................... 16Installing POI Loader Software........................................... 16Using the POI Loader Help Files......................................... 16Finding Extras..................................................................... 16Purchasing Accessories........................................................... 16Troubleshooting....................................................................... 16Index..............................................................................17ii Table of Contents
Getting Started WARNINGSee the Important Safety and Product Information guide in the product box for product warnings and other important information.1Mount the device (page 1).2Register the device (page 3).3Check for updates:• Software updates (page 3).• Free map update (page 3).Mounting Your Device in a MotorcycleAbout the Powered Mount Cables WARNINGGarmin strongly recommends having an experienced installer with the proper knowledge of electrical systems install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can cause bodily injury.See the Important Safety and Product Information guide in the product box for product warnings and other important information.The device must be mounted in a suitable and secure location on your motorcycle, based on available power sources and safe cable routing.Motorcycle cradleBare wires with inline fuse for power connection (to motorcycle power)Installing the Handlebar BaseThe device includes parts for two handlebar installation solutions. Custom mounts can require additional hardware (www.ram-mount.com).Installing the U-bolt and Handlebar Base1Place the U-bolt  around the handlebar , and thread the ends through the handlebar base .2Tighten the nuts to secure the base.NOTE: The recommended torque is 50 lbf-in. Do not exceed torque of 80 lbf-in.Installing the Handlebar Base to the Clutch/Brake-Clamp Bracket1Remove the two factory bolts on your clutch/brake-clamp bracket .NOTE: Both 1/4 in. standard and M6 bolts are included. Match the size of the factory bolts on your clutch/brake-clamp bracket.2Thread the new bolts  through the handlebar base, spacers , and brake-clamp bracket.3Tighten the bolts to secure the base.Attaching the Power Cables to the Motorcycle Mount1Thread the power cable connector  through the top of the opening in the motorcycle mount.2Slide the cable down to the bottom of the opening  and pull the cable back until it is snug.3Screw the black screw  into the back of the mount  to hold the cable in place.4Thread the weather cap  through the top hole and press it into the hole.Getting Started 1
Attaching the Base Plate to the Motorcycle Mount1Thread the M4 x 40 mm panhead screws  through the washers , cradle , spacers , and base plate .2Tighten the nuts to secure the base plate.Attaching the Base Plate to the Handlebar Base1Align the ball of the handlebar base  and the ball of the base plate  with the double-socket arm .2Insert the ball into the double-socket arm.3Tighten the knob slightly.4Adjust for optimal viewing and operation.5Tighten the knob to secure the mount.6Align the ball of the base plate attached to the cradle  with the other end of the double-socket arm.7Repeat steps 2–4.Installing Your Device in the Motorcycle Mount1Fit the bottom of your device into the cradle.2Tilt the device back until it snaps into place.Removing Your Device from the Motorcycle Mount1Press the button on the side of the mount.2Lift out the device.3On the motorcycle mount, place the weather cap on the power connector in the center of the cable (page 1).Mounting Your Device in an AutomobileNOTICEBefore mounting the device, check the local laws pertaining to windshield mounting. WARNINGThis product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight.Do not use the suction cup mount on a motorcycle.1Pull back the weather cap on the back of the cradle.2Plug the automotive power cable  into the mini-USB connector  under the weather cap.3Remove the clear plastic from the suction cup.4Clean and dry your windshield and the suction cup with a lint-free cloth.5Press the suction cup  to the windshield, and flip the lever  back toward the windshield.6Snap the cradle  onto the suction cup arm.7Fit the bottom of your device into the cradle.8Tilt the device back until it snaps into place.9Plug the other end of the automotive power cable into a power outlet.2 Getting Started
About myDashboardUse myDashboard to register your device, check for software and map updates, access product manuals and support, and more.Setting Up myDashboard1Connect the USB cable to the USB port on the back of the device.2Connect the USB cable to the USB port on your computer.3Go to www.garmin.com/dashboard.4Follow the on-screen instructions.Registering the Device1Open myDashboard (page 3).2Click Register Now.3Follow the on-screen instructions.Updating the Software1Open myDashboard (page 3).2Under Software Updates, click Update Now.3Follow the on-screen instructions.nüMaps Guarantee™To receive one free map update (if available), register your device at http://my.garmin.com within 90 days of acquiring satellites while driving with your device. You are not eligible for the free map update if you register by phone or wait longer than 90 days after the first time you acquire satellites while driving with your device. For more information, go to www.garmin.com/numaps.Updating Maps1Open myDashboard (page 3).2Register the device (page 33Select an option:• Under Map Updates, click Update Now.• If a free map update is no longer available, click Buy Now.4Follow the on-screen instructions.Lifetime SubscriptionsSome models include subscriptions to lifetime features.LT: This model includes a lifetime traffic subscription and a traffic receiver (automobile mode only).LM: This model includes a nüMaps Lifetime™ subscription (page 15).LMT: This model includes a nüMaps Lifetime subscription, lifetime traffic subscription, and a traffic receiver (automobile mode only).Turning Off the Device1Hold the Power key .NOTE: If you hold the Power key for less than 5 seconds, the device enters sleep mode (page 3).2Select Off.Resetting the DeviceYou can reset your device if it stops functioning.Hold the Power key for 10 seconds.About Sleep ModeUse sleep mode to conserve battery power when your device is not in use. Sleep mode uses very little power, and a battery charge lasts for weeks when your device is in sleep mode.Entering Sleep ModePress the Power key.Exiting Sleep ModeWhile the device is in sleep mode, press the Power key.Adjusting the Screen Brightness1Select Settings > Display > Brightness.2Use the slider bar to adjust the brightness.Adjusting the Volume1Select Volume.2Select an option:• Use the slider bar to adjust the volume.• Select to mute the device.Status Bar IconsThe status bar is located at the top of the main menu. The status bar icons display information about features on the device. You can select some icons to change settings or view additional information.: GPS signal status.: Bluetooth® technology status (appears when Bluetooth is enabled).: Transportation mode indicator.: Current time.: Battery status.Acquiring GPS SignalsTo navigate with your device, you must acquire satellites. in the status bar indicates the satellite signal strength (see page 3). Acquiring satellites can take several minutes.1Turn on the device.2If necessary, go outdoors to an open area, away from tall buildings and trees.3If necessary, hold to view detailed information about the satellite signals.Viewing GPS Signal StatusHold for three seconds.Transportation ModesMotorcycle modeAutomobile modeOff-road mode (See page 8)Routing and navigation are calculated differently based on your transportation mode.Choosing a Transportation ModeSelect .Battery InformationAfter the device is connected to power, it begins to charge.Getting Started 3
in the status bar indicates the status of the internal battery. To increase the accuracy of the battery gauge, you should fully discharge the battery and then fully charge it. Do not unplug the device until it is fully charged.Setting the TimeNOTE: You can select Automatic to automatically set the time each time the device is powered on.1Select .2Scroll the numbers to set the time.Using the On-Screen Buttons• Select to return to the previous menu screen.• Hold to quickly return to the main menu.• Select or to see more choices.• Hold or to scroll faster.• Select to see a menu of options for the current screen.Using the On-Screen KeyboardSee Language and Keyboard settings to change the keyboard layout (page 14).• Select a character on the keyboard to enter a letter or number.• Select a series of letters, such as "A-I," to select a letter in that series.• Select to add a space.• Select to delete a search entry.• Select to delete a character.• Select to change the keyboard language mode.• Select to enter special characters, such as punctuation marks.• Select to change character capitalization.About ShortcutsAdding a Shortcut IconYou can add shortcuts to the Where To? menu. A shortcut can point to a location, a category, or a search tool.The Where To? menu can contain up to 36 shortcut icons.1Select Where To? > Add Shortcut.2Select an item.Removing a Shortcut1Select Where To? > > Remove Shortcut(s).2Select the shortcut to remove.3Select the shortcut again to confirm.Finding LocationsThe device offers many methods for finding locations.• By category (page 4).• Near another location (page 4).• By spelling the name (page 4).• By address (page 5).• Using recently found locations (page 5).• Using coordinates (page 5).• Using the map (page 5).• Using saved locations (page 6).About LocationsThe detailed maps loaded in your device contain locations, such as restaurants, hotels, and auto services. You can use categories to browse for nearby businesses and attractions.Finding a Location by Category1Select Where To?.2Select a category, or select Categories.3If necessary, select a subcategory.4Select a location.Searching Within a CategoryAfter you have performed a search for a point of interest, certain categories may display a Quick Search list that shows the last three destinations you selected.1Select Where To?.2Select a category, or select Categories.3Select a category.4If applicable, select a destination from the Quick Search list.5If necessary, select the appropriate destination.Finding a Location Using the Search BarYou can use the search bar to search for locations by entering a category, brand name, address, or city name.1Select Where To?.2Select Enter Search in the search bar.3Enter all or part of the search term.Suggested search terms appear below the search bar.4Select an option:• To search for a type of business, enter a category name (for example, "movie theaters").• To search for a business name, enter all or part of the name.• To search for an address near you, enter the street number and street name.• To search for an address in another city, enter the street number, street name, city, and state.• To search for a city, enter the city and state.• To search for coordinates, enter latitude and longitude coordinates.5Select an option:• To search using a suggested search term, select the term.• To search using the text you entered, select .6If necessary, select a location.Changing the Search Area1From the main menu, select Where To?.2Select Searching Near.3Select an option.Reporting a Closed or Missing LocationIf your search results include an outdated or incorrect location, you can report the error to Garmin® and remove the location from future searches.4 Finding Locations
1Search for a location (page 4).2From the search results, select a location.3Select .4Select > Edit.5Select Report as Closed or Report as Missing.The information is sent to Garmin when you connect your device to myDashboard using your computer (page 3).Rating a Point of InterestYou can assign a star rating to a point of interest.1Search for a location (page 4).2From the search results, select a location.3Select .4Select the stars to rate the point of interest.The star rating updates on your device.About Search ToolsYou can search for locations by using the on-screen keyboard or by entering the location address or coordinates.Finding an AddressNOTE: The order of the steps may change depending on the map data loaded on your device.1Select Where To? > Address.2Enter the address number, and select Done.3Enter the street name, and select Next.4If necessary, select Searching Near to change the city, state, or province.5If necessary, select the city, the state, or the province.6If necessary, select the address.Finding an Intersection1Select Where To? > Categories > Intersections.2Select a state or province.NOTE: If necessary, select State or Country to change the country, state, or province.3Enter the first street name, and select Next.4If necessary, select the street.5Enter the second street name, and select Next.6If necessary, select the street.7If necessary, select the intersection.Finding a City1Select Where To? > Categories > Cities.2Select Enter Search.3Enter a city name, and select .4Select a city.Finding a Location Using CoordinatesBefore you can find a location using coordinates, you must add a shortcut to the coordinates search tool (page 4).You can find a location using latitude and longitude coordinates. This can be helpful when geocaching.1Select Where To? > Categories > Coordinates.2If necessary, select > Format, select the correct coordinate format for the type of map you are using, and select Save.3Select the latitude coordinate.4Enter the new coordinate, and select Done.5Select the longitude coordinate.6Enter the new coordinate, and select Done.7Select View on Map.Finding a Location by Browsing the MapBefore you can find places included in the map data, such as restaurants, hospitals, and fuel stations, you must enable the map layer for places along the road (page 8).1Select View Map.2Drag and zoom the map to display the area to search.3If necessary, select , and select a category icon to view only a specific category of places.Location markers ( or a blue dot) appear on the map.4Select an option:• Select a location marker.• Select a point, such as a street, intersection, or address location.5If necessary, select the location description to view additional information.Saving a Home LocationYou can set your home location for the location you return to most often.1Select Where To? > > Set Home Location.2Select Enter My Address, Use Current Location, or Recently Found.The location is saved as "Home" in the Saved menu (page 6).Going HomeSelect Where To? > Go Home.Editing Your Home Location InformationYou can change the address or phone number for a location that appears in the search results.1Select Where To? > Saved > Home.2Select > > Edit.3Enter your changes.4Select Done.Finding Recently Found DestinationsYour device stores the last 50 destinations you have found.1Select Where To? > Recent.2Select a location.Clearing the List of Recently Found LocationsSelect Where To? > Recent > > Clear > Yes.Finding Parking1Select Where To? > Categories > Parking.2Select a parking location.Finding Your Last Parking SpotWhen you remove your device from the vehicle mount while the device is on, your current location is saved as a parking spot.Select Apps > Last Spot.Setting a Simulated LocationIf you are indoors or not receiving satellite signals, you can use the GPS to set a simulated location.1Select Settings > Navigation > GPS Simulator.2From the main menu, select View Map.3Tap the map twice to select an area.The address of the location appears at the bottom of the screen.Finding Locations 5
4Select the location description.5Select Set Location.Saving LocationsSaving a Location1Search for a location (page 4) .2From the search results, select a location.3Select .4Select > Save.5If necessary, enter a name, and select Done.Saving Your Current Location1From the map, select the vehicle icon.2Select Save.3Enter a name, and select Done.4Select OK.Starting a Route to a Saved Location1Select Where To? > Saved.2If necessary, select a category, or select All Saved Places.3Select a location.4Select Go!.Editing a Saved Location1Select Where To? > Saved.2If necessary, select a category.3Select a location.4Select .5Select > Edit.6Select an option:• Select Name.• Select Phone Number.• To assign categories to the Favorite, select Categories.• To save a photo with the Favorite, select Assign Photo (page 6).• To change the symbol used to mark the Favorite on a map, select Change Map Symbol.7Edit the information.8Select Done.Assigning Categories to a Saved LocationYou can add custom categories to organize your saved locations.NOTE: Categories appear in the saved locations menu after you have saved more than 12 locations.1Select Where To? > Saved.2Select a location.3Select .4Select > Edit > Categories.5Enter one or more category names, separate by commas.6If necessary, select a suggested category.7Select Done.Sharing a Saved LocationIf you save the location of a business that is not in the map data, you can share the location with Garmin® so that it can be added to future map updates and shared with the Garmin community.1Select Where To? > Saved.2If necessary, select a category.3Select a location.4Select .5Select Share Place.Sending a Location to the DeviceYou can send locations to your device from various online sources, including http://connect.garmin.com.1Connect your device to your computer (page 3).2If necessary, install the Garmin Communicator Plugin. Go to www.garmin.com/communicator for more information.3On your computer, find a location on a supported website.4From the website, select Send to GPS.NOTE: Some websites may use a different button or link.5Follow the on-screen instructions.Loading Photos for NavigationYou can load photo files that include location information onto your device or memory card. Photos with location information are assigned automatically to the "Photos" category (page 6).• Transfer a photo file that includes location information from your computer to your device (page 13).• Go to http://connect.garmin.com/photos or another supported website, and send a photo to your device that includes location information (page 6).Deleting a Saved LocationNOTE: Deleted locations cannot be recovered.1Select Where To? > Saved.2Select > Delete Saved Places.3Select the box next to the saved locations to delete, and select Delete.NavigationStarting a Route1Search for a location (page 4).2Select a location.3Select Go!.4If necessary, select a route.Changing the Route Calculation ModeThe route calculation is based on road speeds and vehicle acceleration data for a given route. The calculation mode affects only automobile routes.Select Settings > Navigation > Calculation Mode.• Select Faster Time to calculate routes that are faster to drive but can be longer in distance.• Select Shorter Distance to calculate routes that are shorter in distance but can take more time to drive.• Select Less Fuel to calculate routes that could use less fuel than other routes.• Select Off Road to calculate point-to-point routes (without roads).Previewing Multiple Routes1Search for a location (page 4).2From the search results, select a location.3Select Routes.4Use the on-screen buttons to select a route.5Select Go!.Starting a Route to a Saved Location1Select Where To? > Saved.6 Navigation
2If necessary, select a category, or select All Saved Places.3Select a location.4Select Go!.Your Route on the MapThe route is marked with a magenta line. A checkered flag marks your destination.As you travel, the device guides you to the destination with voice prompts, arrows on the map, and directions at the top of the map. If you depart from the original route, the device recalculates the route and provides new directions.Using the Navigation Map1From the main menu, select View Map.2If the zoom controls are hidden, select the map to display the zoom controls.3Select the map.4Select an option:• To zoom in or out, select or .• To rotate the map view, select .• To switch between North Up and 3-D views, select .• To add or remove map layers, select .• To view specific categories, select .• To center the map on your current location, select .• To view shortcuts for map and navigation features, select .Adding a Point to a RouteBefore you can add a stop, you must be navigating a route.1From the map, select > Where To?.2Search for the extra stop.3Select the stop from the search results.4Select Go!.5Select Add to Active Route.Taking a DetourWhile navigating a route, you can use detours to avoid obstacles ahead of you, such as construction zones.While navigating, select > Detour.Stopping the RouteFrom the map, select .Updating Speed LimitsNOTICEThe speed limit feature is for information only and does not replace your responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times. Garmin will not be responsible for any traffic fines or citations you receive for failing to follow all applicable traffic laws and signs.An icon displaying the current speed limit may appear as you travel on major roadways.1From the map, select > Set Speed Limit.2Select and to set the speed limit.Using Suggested RoutesBefore you can use this feature, you must save at least one location and enable the travel history feature (page 14).Using the myTrends™ feature, your device predicts your destination based on your travel history, the day of the week, and the time of day. After you have driven to a saved location several times, the location may appear in the navigation bar on the map, along with the estimated time of travel, and traffic information.Select the navigation bar to view a suggested route to the location.About Exit ServicesWhile you navigate a route, you can find gas, food, lodging, and restrooms near upcoming exits.Services are listed under tabs by category.GasFoodLodgingRestroomsFinding Exit Services1From the map, select > Exit Services.2Use the arrows to select an upcoming exit.3Select an exit service tab.4Select a point of interest.Navigating to an Exit1From the map, select > Exit Services > .2Select Go!.Avoiding Road Features1Select Settings > Navigation > Avoidances.2Select the road features to avoid on your routes, and select Save.About Custom AvoidancesCustom avoidances allow you to avoid specific areas and sections of road. You can enable and disable custom avoidances as needed.Avoiding an Area1Select Settings > Navigation > Custom Avoidances.2If necessary, select Add Avoidances.3Select Add Avoid Area.4Select the upper-left corner of the area to avoid, and select Next.5Select the lower-right corner of the area to avoid, and select Next.The selected area is shaded on the map.6Select Done.Avoiding a Road1Select Settings > Navigation > Custom Avoidances.2Select Add Avoid Road.3Select the starting point of the section of road to avoid, and select Next.4Select the ending point of the road section, and select Next.5Select Done.Disabling a Custom AvoidanceYou can disable a custom avoidance without deleting it.Navigation 7
1Select Settings > Navigation > Custom Avoidances.2Select an avoidance.3Select > Disable.Deleting Custom Avoidances1Select Settings > Navigation > Custom Avoidances.2Select an option:• To delete all custom avoidances, select .• To delete one custom avoidance, select the avoidance, and select > Delete.Enabling Advanced DetoursSelect Settings > Navigation > Advanced Detours.Taking a Detour Around Specified AreasYou can take a detour for a specified distance along your route or detour around specific roads. This is useful if you encounter construction zones, closed roads, or poor road conditions.1Select a destination, and select Go! (page 4).2From the map, select > Detour.3Select Next 0.5mi on Route, Next 2mi on Route, Next 5mi on Route, or Detour by Road(s) on Route.4If necessary, select a road to detour around.Navigating Off RoadIf you are not following roadways as you navigate, you can use Off Road mode.1Select Settings > Navigation.2Select Calculation Mode > Off Road > Save.The next route will be calculated as a straight line to the location.Map PagesCustomizing the MapCustomizing the Map LayersYou can customize which data appear on the map, such as icons for points of interest and road conditions.1From the map, select .2Select Map Layers.3Select which layers you want to include on the map, and select Save.Viewing the Trip LogYour device keeps a trip log, which is a record of the path you have traveled.1Select Settings > Map & Vehicle > Map Layers.2Select the Trip Log check box.Changing the Map Data Field1From the map, select the data field in the lower left-hand corner.2Select a type of data to display.3Select Save.Customizing Map ButtonsYou can include up to two icons on the right side of the main map.1Select Settings > Map & Vehicle > Map Buttons.2Select an icon, and select OK.3Select .4Select a different icon.Removing Buttons from the MapYou can remove all buttons from the right side of the map.1Select Settings > Map & Vehicle > Map Buttons.2Select an icon, and select OK.3Select Save.Changing the Map DashboardThe dashboard displays trip information at the bottom of the map. You can select different dashboards to change the style and the layout of the information.1Select Settings > Map & Vehicle > Dashboards.2Use the arrows to select a dashboard.3Select Save.Changing the Map Perspective1Select Settings > Map & Vehicle > Driving Map View.2Select an option:• Select Track Up to display the map in two dimensions (2-D), with your direction of travel at the top.• Select North Up to display the map in 2-D with North at the top.• Select 3-D to display the map in three dimensions.Viewing TurnsViewing a List of TurnsWhen you are navigating a route, you can view all of the turns and maneuvers for your entire route and the distance between turns.1While navigating a route, select the text bar on the top of the map.2Select a turn.The details for the turn appear. If available, an image of the junction appears for junctions on major roadways.Viewing the Entire Route on the Map1While navigating a route, select the navigation bar at the top of the map.2Select > Map.Viewing the Next TurnWhile navigating an automobile route, a preview of the next turn, lane change, or other maneuver appears in the upper-left corner of the map.The preview includes the distance to the turn or maneuver and the lane in which you should be traveling, if available.From the map, select to view the next turn on the map.Viewing JunctionsWhile navigating a route, you can view the junctions on major roadways. When you approach a junction in a route, the image of that junction appears briefly, if available.From the map, select to view the junction, if available.Viewing Traffic AlertsWhile you navigate an automobile route, a traffic alert may appear in the navigation bar.Select the alert to view more information.8 Map Pages
Viewing Trip InformationThe trip information page displays your present speed and provides statistics about your trip.NOTE: If you make frequent stops, leave the device turned on, so it can accurately measure elapsed time during the trip.From the map, select > Trip Computer.Resetting Trip Information1From the map, select > Trip Computer.2Select > Reset Field(s).3Select an option:• When not navigating a route, select Select All to reset every data field except the speedometer, on the first page.• Select Reset Trip Data to reset the information on the trip computer.• Select Reset Max. Speed to reset the maximum speed.• Select Reset Trip B to reset the odometer.Viewing Current Location InformationYou can use the Where Am I? page to view information about your current location. This feature is helpful if you need to tell emergency personnel your location.From the map, select > Where Am I?.Finding Nearby ServicesYou can use the Where Am I? page to find nearby services, such as hospitals or police stations.1From the map, select > Where Am I?.2Select a category.Getting Directions to Your Current LocationIf you need to tell another person how to get to your current location, your device can give you a list of directions.Select Apps > Where Am I? > > Directions to Me.Hands-Free Voice PromptsAbout Wireless HeadsetsUsing wireless technology, your device can send audio navigation prompts to a wireless headset. For more information, go to www.garmin.com/bluetoothEnabling Bluetooth Wireless Technology1Select Settings > Bluetooth.2Select Bluetooth.Pairing a Wireless HeadsetBefore you can receive navigation prompts through your headset, you must pair your device with a compatible mobile headset.1Place your headset and your Bluetooth device within 33 ft. (10 m) of each other.2On your device, enable wireless technology.3Select an option:• Select Add Headset.• If you have already paired a different headset, select Settings > Bluetooth > Add Headset.4On your headset, enable Bluetooth wireless technology.5On your device, select OK.A list of nearby Bluetooth devices appears.6Select your headset from the list, and select OK.7If necessary, confirm that the device is allowed to connect.8If necessary, enter the device Bluetooth PIN (0000) into your headset.Your device will send navigation prompts to your headset while you navigate a route.Deleting a Paired HeadsetYou can delete a paired headset to prevent it from automatically connecting to your device in the future.1Select Settings > Bluetooth > Headset.2Select .3Select the headset, and select Delete.Disconnecting Your Headset1Select Settings > Bluetooth.2Select Headset > None > Save.3Select Yes.Your headset is disconnected from your device but remains paired with your device.Tips After Pairing the Devices• After the initial pairing, the two devices can connect automatically each time you turn them on.• When your phone is connected to your device, you are ready to make phone calls.• When you turn on the device, it tries to connect to the last phone to which it was connected.• You might need to set your mobile phone to connect to the device automatically when the device is turned on.Using the AppsUsing HelpSelect Apps > Help to view information about using the device.Searching Help TopicsSelect Apps > Help > .Planning a TripYou can use the trip planner to create and save a trip with multiple destinations.1Select Apps > Trip Planner.2Select New Trip.3Select Select Start Location.4Search for a location (page 4).5Select Select.6To add additional locations, select .7Select Next.8Enter a name, and select Done.Scheduling a TripYou can use the trip planner to create and save a trip with multiple destinations.1Select Apps > Trip Planner.Hands-Free Voice Prompts 9
2Select a trip.3Select a location.4Select Departure Time (or Arrival Time if the location is not the first stop in the trip).5Select a date and time, and select Save.6Select Duration.7Select the amount of time you will spend at the location, and select Save.8If necessary, repeat steps 3–7 for each location.Changing Transportation Modes in a TripYou can change the transportation modes used to travel in a saved trip.1Select Apps > Trip Planner.2Select a trip.3Select > Transportation Mode.4Select a transportation mode.5Select Save.Navigating to a Saved Trip1Select Apps > Trip Planner.2Select a saved trip.3Select Go!.4If prompted, select a route (page 7).Editing a Saved Trip1Select Apps > Trip Planner.2Select a saved trip.3Select .4Select an option:• Select Rename Trip.• Select Edit Destinations to add and delete location, or to change the order of locations.• Select Delete Trip.• Select Optimize Order to arrange the stops on your trip in the most-efficient order.TracBack®Following Your Recent TrackThe TracBack feature records a track of your recent movement. You can retrace your recent track back to where you started.1Select Apps > TracBack.Your recent track appears on the map.2Select Go!.Saving Your Recent Track as a TripYou can save your recent track as a trip, which you can navigate later using the trip planner (page 10).1Select Apps > TracBack.Your recent track appears on the map.2Select > Save as Trip.3Enter a name, and select Done.Using the CompassYou can navigate using a GPS compass.Select Apps > Compass.Viewing Previous Routes and DestinationsBefore you can use this feature, you must enable the travel history feature (page 14).You can view your previous routes and places you have stopped on the map.Select Apps > Where I've Been.Logging Service HistoryYou can log the date and odometer reading when service or maintenance is performed on your vehicle. The device provides several service categories, and you can add custom categories (page 10).1Select Apps > Service History.2Select a service category.3Select Add Record.4Enter the odometer reading, and select Next.5Enter a comment (optional).6Select Done.Adding Service Categories1Select Apps > Service History.2Select > Add Category.3Enter a category name, and select Done.Deleting Service CategoriesWhen you delete a service category, all service records in the category are also deleted.1Select Apps > Service History.2Select > Delete Categories.3Select the service categories to be deleted.4Select Delete.Renaming Service Categories1Select Apps > Service History.2Select the category to be renamed.3Select Rename Category.4Enter a name, and select Done.Deleting Service Records1Select Apps > Service History.2Select a service category.3Select > Delete Records.4Select the service records to be deleted.5Select Delete.Editing a Service RecordYou can edit the comment, odometer reading, and date of a service record.1Select Apps > Service History.2Select a category.3Select a field.4Enter the new information, and select Done.Using the World Clock1Select Apps > World Clock.2If necessary, select a city, enter a city name, and select Done.Viewing the World MapApps > World Clock > .Nighttime hours appear in the shaded area of the map.Setting an Alarm1Select Apps > Alarm Clock.2Set a time.10 Using the Apps
3Select the Alarm On check box.Using the CalculatorSelect Apps > Calculator.Converting Units1Select Apps > Unit Converter.2If necessary, select the button next to Convert, select a measurement category, and select Save.3If necessary, select a unit button, select a unit of measurement, and select Save.4Select the field below the unit you want to convert.5Enter the number, and select Done.Setting Currency Conversion RatesThis feature is not available in all areas.You can update the currency conversion rates for the unit converter.1Select Apps > Unit Converter.2Select the button next to Convert.3Select Currency, and select Save.4If necessary, select a currency button, select a different currency, and select Save.5Select the button at the bottom of the screen that displays the currency conversion rates.6Select the box next to a currency.7Enter a value, and select Done.8Select OK.About OffersIf your device package includes a traffic receiver, you will receive location-relevant offers and coupons. Ad-based traffic information is available only in North America.NOTE: The traffic receiver must be connected to external power and you must be in a coverage area to receive ad-based traffic information.See our privacy statement at www.garmin.com/privacy.Viewing Offers CAUTIONDo not attempt to write down the coupon codes while driving.This feature is available only if you are using an ad-supported lifetime traffic receiver.1Select an offer that appears on the screen to search for the nearest location related to that offer.2If available, select to view coupon information.3Write down this code and present it when you arrive at the location.Viewing an Offer ListThis feature is available if you are using an ad-supported lifetime traffic receiver.Select Apps > Offers to view a list of the offers you have received.Disabling Traffic and Offers1Select Traffic > Traffic.2Clear the Traffic check box.The device no longer receives live traffic data, but automobile routes still avoid potentially congested areas using trafficTrends™, if enabled. See page 14.Using the Language GuideUse the Language Guide to look up and translate words or phrases.Select Apps > Language Guide.Purchasing the Language GuideYour device comes with a limited demonstration version of the language guide.To purchase the full language guide, go to www.garmin.com/languageguide.Selecting Languages in the Language GuideYou can select the languages you want to translate when translating words and phrases.1Select Apps > Language Guide.2Select > Language.3Select From, select the language to translate from, and select Save.4Select To, select the language to translate to, and select Save.Translating Words and Phrases1Select Apps > Language Guide.2Select a category and subcategories.3If necessary, select , enter a keyword, and select Done.4Select a word or a phrase.5Select to listen to the translation.Using a Bilingual Dictionary1Select Apps > Language Guide > Bilingual Dictionaries.2Select a dictionary.3If necessary, select , enter a word, and select Done.4Select a word.5Select to listen to the translation.TrafficReceiving Traffic DataNOTICEHeated (metallized) windshields could degrade the performance of the traffic receiver.Before you can receive traffic data, you must purchase a compatible Garmin traffic receiver accessory. Go to http://my.garmin.com for more information.When the receiver is within a traffic coverage area, your device will begin displaying traffic information.The traffic receiver and the device may need to be in data range of an FM station transmitting traffic information.1Connect the traffic receiver to an external power source.2Connect the traffic receiver to the device.Traffic ReceiverMini-USB connectorExternal antenna connectorTraffic 11
Internal antennaPower LEDVehicle power adapterAbout the Traffic IconWhen you are receiving traffic information, a traffic icon appears on the map. The traffic icon changes color to indicate the severity of traffic conditions.Green: Traffic is flowing freely.Yellow: Traffic is moving, but there is a delay. There is moderate traffic congestion.Red: Traffic is not moving or moving very slowly. There is a severe delay.Gray: Traffic information is not available.Traffic on Your RouteWhen calculating your route, the device examines the current traffic and automatically optimizes the route for the shortest time. If a severe traffic delay occurs on your route while you are navigating, your device automatically recalculates the route.The traffic icon changes color to indicate the severity of traffic conditions on your route or on the road you are currently traveling.Your device may route you through a traffic delay if a better alternative route does not exist. The delay time is added into your estimated time of arrival automatically.Viewing Traffic on Your Route1While navigating a route, select .2Select Traffic on Route.A list of traffic events appears, organized by their location on the route.3Select an event.Manually Avoiding Traffic on Your Route1From the map, select .2Select Traffic on Route.3If necessary, use the arrows to view other traffic delays on your route.4Select > Avoid.Taking an Alternate Route1While navigating an automobile route, select .2Select Alternate Route.3Select a route.Viewing Traffic on the MapThe traffic map shows color-coded traffic flow and delays on nearby roads.1From the map, select .2Select Traffic Conditions.Traffic in Your AreaSearching for Traffic Delays1From the map page, select .2Select Traffic Conditions > .3Select an item in the list.4If there is more than one delay, use the arrows to view additional delays.Viewing a Traffic Incident on the Map1From the map, select .2Select Traffic Conditions.3Select a traffic icon.Understanding Traffic DataThe traffic legend explains the icons and colors used on the traffic map.1From the map, select > Traffic.2Select Traffic Legend .Traffic SubscriptionsSubscription ActivationYou do not need to activate the subscription included with your FM traffic receiver. The subscription activates automatically after your device acquires satellite signals while receiving traffic signals from the pay service provider.Adding a SubscriptionYou can purchase traffic subscriptions for other regions or countries.1From the main menu, select Traffic.2Select an option:• For non-North American units, select Subscriptions > .• For North American units, select Add Phone.3Write down the FM traffic receiver unit ID.4Go to www.garmin.com/fmtraffic to purchase a subscription and get a 25-character code.The traffic subscription code cannot be reused. You must obtain a new code each time you renew your service. If you own multiple FM traffic receivers, you must obtain a new code for each receiver.5Select Next on the device.6Enter the code.7Select Done.Disabling Traffic1Select Traffic > Traffic.2Clear the Traffic check box.The device no longer receives live traffic data, but will still avoid potentially congested areas using routes still avoid potentially congested areas using trafficTrends, if enabled (page 14).Data ManagementAbout Data ManagementYou can store files, such as JPEG image files, on your device. The device has a memory card slot for additional data storage.NOTE: The device is not compatible with Windows® 95, 98, Me, Windows NT®, and Mac® OS 10.3 and earlier.File TypesThe device supports these file types.• Maps and GPX waypoint files from myGarmin™ mapping software, includingMapSource®, BaseCamp™, and HomePort™ (page 16).• GPI custom POI files from Garmin POI Loader (page 16)About Memory CardsYou can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping software (www.garmin.com/trip_planning). In addition to map and data storage, the memory card can be used to store files such as maps, images, geocaches, routes, waypoints, and custom POIs.Installing a Memory CardThe device supports microSD™ and microSDHC memory cards.12 Data Management
1Insert a memory card into the slot on the device.2Press it in until it clicks.Connecting the Device to Your ComputerYou can connect the device to your computer using the USB cable included with your device.NOTE: The first time you connect your device to your Windows computer, you will be prompted to install the myGarmin Agent software. Go to www.garmin.com/agent for more information.1Plug the small end of the USB cable into the port on the device.2Plug the larger end of the USB cable into an available USB port on your computer.A picture of your device connected to a computer appears on the device screen.On a Windows computer, your device appears in My Computer as either a portable device or as two removable drives representing the device and the memory card.Transferring Data From Your Computer1Connect the device to your computer (page 13).Your device and memory card appear as removable drives in My Computer in Windows and as mounted volumes on Mac computers.NOTE: Some computers with multiple network drives cannot display device drives. See your operating system Help file to learn how to map the drive.2On your computer, open the file browser.3Select the file.4Select Edit > Copy.5Open the Garmin or memory card drive or volume.6Select Edit > Paste.The file appears in the list of files in the device memory or on the memory card.Disconnecting the USB CableIf your device is connected to your computer as a removable drive or volume, you must safely disconnect your device from your computer to avoid data loss. If your device is connected to your Windows computer as a portable device, it is not necessary to safely disconnect.1Complete an action:• For Windows computers, select the Safely Remove Hardware icon in the system tray, and select your device.• For Mac computers, drag the volume icon to the Trash.2Disconnect the cable from your computer.Deleting FilesNOTICEIf you do not know the purpose of a file, do not delete it. Your device memory contains important system files that should not be deleted.1Open the Garmin drive or volume.2If necessary, open a folder or volume.3Select a file.4Press the Delete key on your keyboard.Customizing the DeviceMap and Vehicle SettingsSelect Settings > Map & Vehicle.Vehicle: Changes the icon to represent your position on the map. Go to www.garmingarage.com for more icons.Driving Map View: Sets the perspective on the map.Pedestrian Map View: Sets the perspective on the map.Map Detail: Sets the level detail on the map. More detail may cause the map to draw slower.Map Theme: Changes the color of the map data.Map Buttons: Sets which icons are included on the map. Up to three icons can be included on the map.Map Layers: Sets the data that appears on the map page (page 8).Dashboards: Sets the map dashboard layout.myMaps: Sets which installed maps the device uses.Enabling MapsYou can enable map products that are installed on your device.TIP: To purchase additional map products, go to www.garmin.com/us/maps.1Select Settings > Map & Vehicle > myMaps.2Select a map.Navigation SettingsSelect Settings > Navigation.Calculation Mode: Sets route preference.Off-Route Recalculation: Select how your device recalculates a route if you deviate from the route.Avoidances: Sets road features to avoid on a route.Custom Avoidances: Allows you to avoid specific roads or areas.Advanced Detours: Sets the length of the detour.Limit Walking: Controls the maximum walking distance included in a pedestrian route.Public Transit: Enables or disables transit types.Safe Mode: Disables all functions that require significant operator attention and could become a distraction while driving.GPS Simulator: Stops the device from receiving a GPS signal, and saves battery power.Route PreferencesSelect Settings > Navigation > Calculation Mode.The route calculation is based on road speeds and vehicle acceleration data for a given route.Faster Time: Calculates routes that are faster to drive but can be longer in distance.Shorter Distance: Calculates routes that are shorter in distance but can take more time to drive.Less Fuel: Calculates routes that could use less fuel than other routes.Off Road: Calculates a direct line from your location to your destination.Display SettingsSelect Settings > Display.Color Mode: Changes the brightness of the screen. Decreasing the brightness can save battery power.Display Timeout: Sets the amount of idle time before your device enters sleep mode.Screenshot: Allows you to take a picture of the device screen. Screenshots are saved in the Screenshot folder of the device storage.Customizing the Device 13
Bluetooth SettingsSelect Settings > Bluetooth.Bluetooth: Enables Bluetooth wireless technology.Add Phone or Phone: Manages connection between your device and mobile phones with Bluetooth wireless technology.Friendly Name.: Allows you to enter a friendly name that identifies your devices with Bluetooth wireless technology.Managing the Bluetooth Device ListYou can add, disconnect, or delete phones that your device detects while Bluetooth is enabled.1Select Settings > Bluetooth > Phone.2Select an option:• Select a phone for your device to connect with.• Select to add a phone to the menu.• Select to delete a phone from the device memory.• Select None to drop your current connection.Disabling Bluetooth1Select Settings > Bluetooth.2Select Bluetooth.Traffic SettingsSelect Traffic > Traffic.Traffic: Enables traffic.Subscriptions: Lists current traffic subscriptions.trafficTrends: See page 14.About Traffic SubscriptionsYou can purchase additional subscriptions or a renewal if you subscription expires. Go to www.garmin.com/traffic.Viewing Traffic SubscriptionsSelect Settings > Traffic > Subscriptions.trafficTrendsWhen the trafficTrends feature is enabled, your device records historic traffic data and uses that data to calculate more-efficient routes.When you drive with the trafficTrends feature enabled, your device records traffic data that is used to improve the trafficTrends historical traffic information. This information is sent to Garmin when you connect your device to myGarmin using your computer.NOTE: Different routes may be calculated based on traffic trends for the day of the week or the time of day.Disabling trafficTrendsTo prevent your device from recording or sharing traffic data, you must disable trafficTrends.Select Settings > Traffic > trafficTrends.Units and Time SettingsSelect Settings > Units & Time.Current Time: Sets the device time.Time Format: Allows you to select a 12-hour, 24-hour, or UTC display time.Units: Sets the unit of measure used for distances.Language and Keyboard SettingsSelect Settings > Language & KeyboardVoice Language: Sets the language for voice prompts.Text Language: Sets all on-screen text to the selected language.NOTE: Changing the text language does not change the language of user-entered data or map data, such as street names.Keyboard Language: Sets the language for your keyboard.Keyboard Layout: Sets the keyboard layout.Device and Privacy SettingsSelect Settings > Device.About: Displays the software version number, the unit ID number, and information on several other software features.EULAs: Displays the end-user license agreements that apply to your choice.NOTE: You need this information when you update the system software or purchase additional map data (page 15).Position Reporting: Allows the device to collect your speed, direction, and location information and share it with strategic partners and service providers.Travel History: Allows the device to record information for the myTrends (page 7), Where I’ve Been (page 10) and Trip Log (page 8) features.Proximity Alerts SettingsSelect Settings > Proximity Alerts.Audio: Sets the style of alert that plays when you approach proximity points.Alerts: Sets the type of proximity points for which alerts are played.Restoring SettingsYou can restore a category of settings or all settings to the factory default values.1Select Settings.2If necessary, select a settings category.3Select > RestoreAppendixPower CablesYour device can be powered three ways.• Motorcycle power cable• Vehicle power cable• USB cable• AC adapter (optional accessory)Charging the DeviceYou can charge the battery in the device using any of these methods:• Connect the device to the vehicle power cable.• Connect the device to the motorcycle power cable• Connect the device to a computer using the included USB cable.• Connect the device to an optional power adapter accessory, such as a wall power adapter.About Device CareNOTICEAvoid dropping your device.14 Appendix
NOTICEDo not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.NOTICENever use a hard or sharp object to operate the touchscreen, or damage may result.Cleaning the Outer Casing1Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent solution.2Wipe the device dry.Cleaning the Touchscreen1Use a soft, clean, lint-free cloth.2If necessary, use water, isopropyl alcohol, or eyeglass lens cleaner.3Apply the liquid to the cloth.4Gently wipe the screen with the cloth.Avoiding Theft• Remove the device and mount from sight when not in use.• Remove the residue left on the windshield by the suction cup.• Do not keep your unit in the glove compartment.• Register your device at http://my.garmin .com.Extending the Battery Life• Keep your device away from extreme temperatures.• Put the device in sleep mode (page 3).• Decrease the screen brightness (page 13).• Do not leave your device in direct sunlight.• Decrease the volume (page 3).• Disable Bluetooth (page 14).• Shorten the display timeout time (page 13).Changing the Fuse in the Vehicle Power CableNOTICEWhen replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper position. The vehicle power cable does not work unless it is assembled correctly.If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter.1Unscrew the end piece .TIP: You may need to use a coin to remove the end piece.2Remove the end piece, the silver tip , and the fuse .3Install a 2 A fast-blow fuse.4Place the silver tip in the end piece.5Screw the end piece back into the vehicle power cable .Mounting on Your DashboardNOTICEThe permanent mounting adhesive is extremely difficult to remove after it is installed.Use the mounting disk to mount your device to the dashboard and comply with certain state regulations. See www.garmin.com for more information.1Clean and dry the dashboard where you are placing the disk.2Remove the backing from the adhesive on the bottom of the disk.3Place the disk on the dashboard.4Remove the clear plastic cover from the top of the disk.5Place the suction cup mount on top of the disk.6Flip the lever down (toward the disk).Removing the Device, Cradle, and MountRemoving the Device from the Cradle1Press the tab on the top of the cradle.2Tilt the device forward.Removing the Cradle from the Mount1Turn the cradle to the right or left.2Apply pressure until the socket on the cradle releases the ball on the mount.Removing the Suction Cup Mount from the Windshield1Flip the lever on the suction cup mount toward you.2Pull the tab on the suction cup toward you.Updating Maps1Open myDashboard (page 3).2Register the device (page 3).3Select an option.• Under Map Updates, click Update Now.• If a free map update is no longer available, click Buy Now.4Follow the on-screen instructions.About nüMaps LifetimeModels with "LM" after the model number include subscriptions to nüMaps Lifetime, which provides quarterly map updates for the life of your device. For terms and conditions, go to www.garmin.com/numapslifetime.NOTE: If your device does not include a subscription to nüMaps Lifetime, you can purchase one at www.garmin.com/numapslifetime.Purchasing Additional Maps1Go to your device product page on the Garmin web site (www.garmin.com).2Click the Maps tab.3Follow the on-screen instructions.Safety CamerasNOTICEGarmin is not responsible for the accuracy of or the consequences of using a custom point of interest or a safety camera database.Safety camera information is available in some locations. Check http://my.garmin.com for availability. For these locations, you can purchase a subscription for safety camera information. The subscription includes the locations of hundreds of safety cameras. Your device alerts you when you are approaching a safety camera and can warn you if you are driving too fast. The data is updated at least weekly, so you can update your device regularly to receive the most up-to-date information.Appendix 15
You can purchase a new region or extend an existing subscription at any time. Each region that you purchase has an expiration date.Custom Points of InterestCustom POIs are customized points on the map. They can contain alerts that let you know if you are near a designated point or if you are traveling faster than a specified speed.Installing POI Loader SoftwareYou can create or download custom POI lists on your computer and install them on your device using POI Loader software.1Go to www.garmin.com/extras.2Click Services > POI Loader.3Install the POI Loader onto your computer.Using the POI Loader Help FilesFor more information on the POI loader, refer to the Help file.With the POI loader open, click Help.Finding Extras1Select Where To? > Custom POIs.2Select a category.Purchasing AccessoriesGo to http://buy.garmin.com.TroubleshootingProblem SolutionMy device is not acquiring satellite signals.• Verify the GPS simulator is turned off (page 13).• Take your device out of parking garages and away from tall buildings and trees.• Remain stationary for several minutes.The suction cup will not stay on my windshield.1Clean the suction cup and windshield with rubbing alcohol.2Dry with a clean, dry cloth.3Mount the suction cup (page 2).The device does not charge in my vehicle.• Check the fuse in the vehicle power cable (page 15).• Verify the vehicle is turned on and is supplying power to the power outlet.• Your device can only charge between 32° F and 113° F (between 0° C and 45° C).My battery does not stay charged for very long.To maximize the time between changes, turn down the backlight (page 13).My battery gauge does not seem accurate.Allow the unit to fully discharge, and fully charge it (without interrupting the charge cycle).How do I know my device is in USB mass storage mode?When your device is in USB mass storage mode, a picture of a device connected to a computer is shown on the device screen. Also, you should see two new removable disk drives listen in My Computer.The device is connected to the computer, but it will not go into mass storage mode.1Disconnect the USB cable from your computer.2Turn off the device.3Plug the USB cable into a USB port on your computer and into your device.The device automatically turns on and goes into USB mass storage mode.4Verify your device is connected to a USB port and not a USB hub.Problem SolutionI cannot see any new removable drives in my list of drives.If you have several network drives mapped on your computer, Windows can have trouble assigning drive letters to your device drives. Refer to your operating system Help file to learn how to map or assign drive letters.My phone will not connect to the device.• From the main menu, select Settings > Bluetooth. The Bluetooth field must be set to Enabled.• Turn on your phone and bring it within 33 feet (10m) of the device.• Go to www.garmin.com/bluetooth for more help.16 Appendix
IndexSymbols3-D map view 8Aaccessories 16adding stops 7advanced detours 8alarm 10alertsaudio 14proximity points 14safety cameras 14traffic 8audio, proximity points 14avoidancesarea 7customizing 7deleting 8disabling 7road 7road features 7Bbatterycharging 3, 14maximizing 15Bluetooth devices 14Bluetooth technologydisabling 14disconnecting a headset 9enabling 9settings 14brightness 3, 13Ccables, power 14calculator 11cameras, safety 15changing search area 4charging the device 3, 14cleaning the device 15clock 10compass 10computer, connecting 13convertingcurrency, converting 11units 11coordinates 5coupon code 11cradle, removing 15current location 9custom POIs 16customizing, avoidances 7customizing the device 13Ddashboard mount 15deletingall user data 13paired headset 9service categories 10service records 10trips 10destinations 10. See also locationsdetours, advanced 8device, registering 3device care 14directions 8display settings 13driving directions 8EEULAs 14exit services, finding 7extrascustom points of interest 16safety cameras 15Ffilessupported types 12transferring 13finding locations. See also locationsaddresses 5browsing the map 5categories 4cities 5coordinates 5intersections 5using the map 5. See also locationsfuse, changing 15Ggeocaching 5going home 5GPS 3Hheadsetdisconnecting 9pairing 9help 9. See also product supporthomeediting location 5going 5setting locations 5Iicons, traffic 12ID number 14Jjunction view 8Kkeyboardlanguage 14layout 14Llanguagekeyboard 14voice language 14latitude and longitude, coordinates 5loading pictures 6locations. See also locationscurrent 6, 9recently found 5saving 6searching for 5setting home 5simulated 5. See also locationsMmapdata field 8reporting errors 4map perspective 8map view2-D 83-D 8mapsbrowsing 5detail level 13nüMaps Guarantee 3nuMaps Lifetime 15nüMaps Lifetime 3purchasing 15theme 13traffic conditions 12updating 3, 15viewing routes 8memory card 12. See microSD cardmicroSD card, installing 12motorcycle mount, cables 1, motorcycle mount 1mounting the deviceautomobile 2dashboard 15motorcycle 1removing from mount 2, 15suction cup 15myDashboard, updating software 3myTrends, routes 7Nnavigationoff-road 8photo 6previewing routes 6settings 13next turn 8nüMaps Guarantee 3nuMaps Lifetime 15nüMaps Lifetime 3Ooff-road navigation 8offerscoupon code 11viewing 11on-screen buttons 4Ppairingdeleting paired headset 9headset 9parking, last spot 5POI 16. See also point of interest (POI)POI Loader 16points of interest (POI Loader) 16points of interest (POI)custom 16extras 16POI Loader 16rating 5Points of Interest (POI), Custom 16power cables, changing the fuse 15power key, turn off device 3proximity points alerts, settings 14QQuick Search 4Rrating points of interest 5recently found locations 5registering the device 3removing cradle 15renaming trips 10reporting POI errors 4resettingdevice 3trip data 9restoring settings 14routescalculating 6myTrends 7preferences 13previewing 6recalculating 12starting 6stopping 7suggested 7viewing on the map 8Ssafety cameras, database 15satellite signalsacquiring 3viewing 3saved locationscategories 6deleting 6editing 6favorites 6saving, current location 6Index 17
saving locations 6screen, brightness 3screenshot 13search bar 4service historycategories 10deleting 10editing 10records 10settings 13, 14shortcutsadding 4removing 4simulated locations 5sleep modeentering 3exiting 3software, version 14speed limit, changing 7stops, adding 7subscriptionsnüMaps Lifetime 3traffic 3suction cup 15Ttheft, avoiding 15time settings 4, 14TracBack 10trafficactivating a subscription 12adding subscriptions 12alerts 8alternate route 12avoiding 12data 12disabling 11, 12icons 12incidents 12lifetime subscriptions 3recalculating routes 12receiver 11route recalculations 12searching for delays 12trafficTrends 14trafficTrends, disabling 14transportation modesautomotive 3changing 10motorcycle 3travel history 14trip computer, resetting information 9trip data, resetting 9trip information, viewing 9trip log, viewing 8trip planner, editing a trip 10turn list 8Uunit converter 11unit ID 14updatesmaps 15software, updating 3USB, disconnecting 13user data, deleting 13Vvoice prompt 9volume, adjusting 3Wwhere am I? 9Where Am I? 6wireless headset 918 Index
www.garmin.com/support913-397-82001-800-800-10200808 2380000+44 870 850 1242 1-866-429-9296 43 (0) 3133 3181 000 32 2 672 52 54 00 45 4810 5050 00 358 9 6937 9758 00 331 55 69 33 990180 5 / 42 76 46 - 880 00 39 02 3669 9699 0800-0233937 815 69 55500800 4412 454+44 2380 662 915 00 35 1214 447 460 00 34 902 007 097 00 46 7744 52020Garmin International, Inc.1200 East 151st StreetOlathe, Kansas 66062, USAGarmin (Europe) Ltd.Liberty House, Hounsdown Business ParkSouthampton, Hampshire, SO40 9LR UKGarmin CorporationNo. 68, Zangshu 2nd Road, Xizhi Dist.New Taipei City, 221, Taiwan (R.O.C.)© March 2012 Garmin Ltd. or its subsidiaries

Navigation menu