Garmin A2AMGB LOW POWER TRANSMITTER (2400-2483.5 MHz) User Manual 1

Garmin International Inc LOW POWER TRANSMITTER (2400-2483.5 MHz) Users Manual 1

Contents

Users Manual 1

Download: Garmin A2AMGB LOW POWER TRANSMITTER (2400-2483.5 MHz) User Manual 1
Mirror Download [FCC.gov]Garmin A2AMGB LOW POWER TRANSMITTER (2400-2483.5 MHz) User Manual 1
Document ID1691686
Application IDFTsGUr/7NBcV182/MM9gXg==
Document DescriptionUsers Manual 1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize219.63kB (2745414 bits)
Date Submitted2012-05-07 00:00:00
Date Available2012-05-07 00:00:00
Creation Date2012-03-06 14:17:27
Producing SoftwareAntenna House PDF Output Library 2.6.0 (Windows (x64))
Document Lastmod2012-04-09 14:46:22
Document TitleUsers Manual 1
Document CreatorAH Formatter V5.3 MR3 (5,3,2011,1116) for Windows (x64)

zūmo 300 Series
®
Owner’s Manual
Models: zumo 340, 350
March 2012
190-01457-00
Printed in Taiwan
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the
right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such
changes or improvements. Go to www.garmin.com for current updates and supplemental information concerning the use of this product.
TracBack®, Garmin®, the Garmin logo, and zūmo® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. BaseCamp™,
HomePort™, myGarmin™, myTrends™, nüMaps Guarantee™, nüMaps Lifetime™, and trafficTrends™ are trademarks of Garmin Ltd. or its subsidiaries. These
trademarks may not be used without the express permission of Garmin.
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. microSD™ is a trademark
of SD-3C. Windows® and Windows NT® are registered trademarks of Microsoft Corporation in the United States and/or other countries. Mac® is a trademark
of Apple Computer, Inc.
HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. HD Radio® and the HD logo are proprietary
trademarks of iBiquity Digital Corporation.
Table of Contents
Getting Started............................................................... 1
Mounting Your Device in a Motorcycle ...................................... 1
About the Powered Mount Cables ........................................ 1
Installing the Handlebar Base ............................................... 1
Attaching the Power Cables to the Motorcycle Mount .......... 1
Attaching the Base Plate to the Motorcycle Mount ............... 2
Attaching the Base Plate to the Handlebar Base .................. 2
Installing Your Device in the Motorcycle Mount .................... 2
Removing Your Device from the Motorcycle Mount ................... 2
Mounting Your Device in an Automobile .................................... 2
About myDashboard .................................................................. 3
Setting Up myDashboard ...................................................... 3
Registering the Device .......................................................... 3
Updating the Software ........................................................... 3
nüMaps Guarantee™ ............................................................ 3
Updating Maps ...................................................................... 3
Turning Off the Device ............................................................... 3
Resetting the Device ............................................................. 3
About Sleep Mode ..................................................................... 3
Entering Sleep Mode ............................................................. 3
Exiting Sleep Mode ............................................................... 3
Adjusting the Screen Brightness ................................................ 3
Adjusting the Volume ................................................................. 3
Status Bar Icons ......................................................................... 3
Acquiring GPS Signals .......................................................... 3
Transportation Modes ........................................................... 3
Battery Information ................................................................ 3
Setting the Time .................................................................... 4
Using the On-Screen Buttons .................................................... 4
Using the On-Screen Keyboard ................................................. 4
About Shortcuts ......................................................................... 4
Adding a Shortcut Icon .......................................................... 4
Removing a Shortcut ............................................................. 4
Finding Locations.......................................................... 4
About Locations ......................................................................... 4
Finding a Location by Category ............................................ 4
Finding a Location Using the Search Bar .............................. 4
Changing the Search Area .................................................... 4
Reporting a Closed or Missing Location ............................... 4
Rating a Point of Interest ....................................................... 5
About Search Tools ................................................................... 5
Finding an Address ............................................................... 5
Finding an Intersection .......................................................... 5
Finding a City ........................................................................ 5
Finding a Location Using Coordinates .................................. 5
Finding a Location by Browsing the Map .............................. 5
Saving a Home Location ............................................................ 5
Going Home .......................................................................... 5
Editing Your Home Location Information .............................. 5
Finding Recently Found Destinations ........................................ 5
Clearing the List of Recently Found Locations ...................... 5
Finding Parking .......................................................................... 5
Finding Your Last Parking Spot ............................................ 5
Setting a Simulated Location ..................................................... 5
Saving Locations ........................................................................ 6
Saving a Location .................................................................. 6
Saving Your Current Location ............................................... 6
Starting a Route to a Saved Location ................................... 6
Editing a Saved Location ...................................................... 6
Assigning Categories to a Saved Location ........................... 6
Sharing a Saved Location ..................................................... 6
Sending a Location to the Device ......................................... 6
Loading Photos for Navigation .............................................. 6
Table of Contents
Deleting a Saved Location .................................................... 6
Navigation.......................................................................6
Starting a Route ......................................................................... 6
Changing the Route Calculation Mode ................................. 6
Previewing Multiple Routes ................................................... 6
Starting a Route to a Saved Location ................................... 6
Your Route on the Map .............................................................. 7
Using the Navigation Map ..................................................... 7
Adding a Point to a Route ..................................................... 7
Taking a Detour ..................................................................... 7
Stopping the Route ............................................................... 7
Updating Speed Limits .......................................................... 7
Using Suggested Routes ...................................................... 7
About Exit Services .................................................................... 7
Finding Exit Services ............................................................. 7
Navigating to an Exit ............................................................. 7
Avoiding Road Features ............................................................ 7
About Custom Avoidances ......................................................... 7
Avoiding an Area ................................................................... 7
Avoiding a Road .................................................................... 7
Disabling a Custom Avoidance ............................................. 7
Deleting Custom Avoidances ................................................ 8
Enabling Advanced Detours ...................................................... 8
Taking a Detour Around Specified Areas .............................. 8
Navigating Off Road ................................................................... 8
Map Pages...................................................................... 8
Customizing the Map ................................................................. 8
Customizing the Map Layers ................................................. 8
Viewing the Trip Log ............................................................. 8
Changing the Map Data Field ............................................... 8
Customizing Map Buttons ..................................................... 8
Changing the Map Dashboard .............................................. 8
Changing the Map Perspective ............................................. 8
Viewing Turns ............................................................................ 8
Viewing a List of Turns .......................................................... 8
Viewing the Next Turn ........................................................... 8
Viewing Junctions ................................................................. 8
Viewing Traffic Alerts ............................................................ 8
Viewing Trip Information ....................................................... 9
Viewing Current Location Information ........................................ 9
Finding Nearby Services ....................................................... 9
Getting Directions to Your Current Location ......................... 9
Hands-Free Voice Prompts........................................... 9
About Wireless Headsets ........................................................... 9
Enabling Bluetooth Wireless Technology .............................. 9
Pairing a Wireless Headset ........................................................ 9
Deleting a Paired Headset .................................................... 9
Disconnecting Your Headset ................................................. 9
Tips After Pairing the Devices ............................................... 9
Using the Apps............................................................... 9
Using Help ................................................................................. 9
Searching Help Topics .......................................................... 9
Planning a Trip ........................................................................... 9
Scheduling a Trip .................................................................. 9
Changing Transportation Modes in a Trip ........................... 10
Navigating to a Saved Trip .................................................. 10
Editing a Saved Trip ............................................................ 10
TracBack® ............................................................................... 10
Following Your Recent Track .............................................. 10
Saving Your Recent Track as a Trip ................................... 10
Using the Compass .................................................................. 10
Viewing Previous Routes and Destinations ............................. 10
Logging Service History ........................................................... 10
Adding Service Categories .................................................. 10
Deleting Service Categories ................................................ 10
Deleting Service Records .................................................... 10
Editing a Service Record ..................................................... 10
Using the World Clock ............................................................. 10
Viewing the World Map ....................................................... 10
Setting an Alarm ...................................................................... 10
Using the Calculator ................................................................. 11
Converting Units ...................................................................... 11
Setting Currency Conversion Rates .................................... 11
About Offers ............................................................................. 11
Viewing Offers ..................................................................... 11
Viewing an Offer List ........................................................... 11
Disabling Traffic and Offers ................................................. 11
Using the Language Guide ...................................................... 11
Purchasing the Language Guide ......................................... 11
Selecting Languages in the Language Guide ..................... 11
Translating Words and Phrases .......................................... 11
Using a Bilingual Dictionary ................................................ 11
Traffic............................................................................ 11
Receiving Traffic Data .............................................................. 11
Traffic Receiver ........................................................................ 11
About the Traffic Icon .......................................................... 12
Traffic on Your Route ............................................................... 12
Viewing Traffic on Your Route ............................................ 12
Manually Avoiding Traffic on Your Route ............................ 12
Taking an Alternate Route .................................................. 12
Viewing Traffic on the Map .................................................. 12
Traffic in Your Area .................................................................. 12
Searching for Traffic Delays ................................................ 12
Viewing a Traffic Incident on the Map ................................. 12
Understanding Traffic Data ...................................................... 12
Traffic Subscriptions ................................................................ 12
Subscription Activation ........................................................ 12
Disabling Traffic ....................................................................... 12
Avoiding Theft ..................................................................... 15
Extending the Battery Life ................................................... 15
Changing the Fuse in the Vehicle Power Cable ...................... 15
Mounting on Your Dashboard .................................................. 15
Removing the Device, Cradle, and Mount ............................... 15
Removing the Device from the Cradle ................................ 15
Removing the Cradle from the Mount ................................. 15
Removing the Suction Cup Mount from the Windshield ...... 15
Updating Maps ......................................................................... 15
About nüMaps Lifetime ....................................................... 15
Purchasing Additional Maps .................................................... 15
Safety Cameras ....................................................................... 15
Custom Points of Interest ......................................................... 16
Installing POI Loader Software ........................................... 16
Using the POI Loader Help Files ......................................... 16
Finding Extras ..................................................................... 16
Purchasing Accessories ........................................................... 16
Troubleshooting ....................................................................... 16
Index..............................................................................17
Data Management ........................................................ 12
About Data Management ......................................................... 12
File Types ................................................................................ 12
About Memory Cards ............................................................... 12
Installing a Memory Card .................................................... 12
Connecting the Device to Your Computer ............................... 13
Transferring Data From Your Computer .................................. 13
Disconnecting the USB Cable ............................................. 13
Deleting Files ........................................................................... 13
Customizing the Device.............................................. 13
Map and Vehicle Settings ........................................................ 13
Enabling Maps .................................................................... 13
Navigation Settings .................................................................. 13
Route Preferences .............................................................. 13
Display Settings ....................................................................... 13
Bluetooth Settings .................................................................... 14
Managing the Bluetooth Device List .................................... 14
Disabling Bluetooth ............................................................. 14
Traffic Settings ......................................................................... 14
About Traffic Subscriptions ................................................. 14
trafficTrends ........................................................................ 14
Units and Time Settings ........................................................... 14
Language and Keyboard Settings ............................................ 14
Device and Privacy Settings .................................................... 14
Proximity Alerts Settings .......................................................... 14
Restoring Settings .................................................................... 14
Appendix.......................................................................14
Power Cables ........................................................................... 14
Charging the Device ............................................................ 14
About Device Care ................................................................... 14
Cleaning the Outer Casing .................................................. 15
Cleaning the Touchscreen .................................................. 15
ii
Table of Contents
Getting Started
WARNING
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
1 Mount the device (page 1).
2 Register the device (page 3).
3 Check for updates:
• Software updates (page 3).
• Free map update (page 3).
Mounting Your Device in a Motorcycle
About the Powered Mount Cables
WARNING
Garmin strongly recommends having an experienced installer
with the proper knowledge of electrical systems install the
device. Incorrectly wiring the power cable can result in damage
to the vehicle or the battery and can cause bodily injury.
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
NOTE: Both 1/4 in. standard and M6 bolts are included.
Match the size of the factory bolts on your clutch/brakeclamp bracket.
2 Thread the new bolts  through the handlebar base, spacers
, and brake-clamp bracket.
3 Tighten the bolts to secure the base.
Attaching the Power Cables to the Motorcycle Mount
1 Thread the power cable connector  through the top of the
opening in the motorcycle mount.
The device must be mounted in a suitable and secure location
on your motorcycle, based on available power sources and safe
cable routing.


Motorcycle cradle
Bare wires with inline fuse for power connection (to motorcycle
power)
Installing the Handlebar Base
The device includes parts for two handlebar installation
solutions. Custom mounts can require additional hardware
(www.ram-mount.com).
2 Slide the cable down to the bottom of the opening  and pull
the cable back until it is snug.
3 Screw the black screw  into the back of the mount  to
hold the cable in place.
Installing the U-bolt and Handlebar Base
1 Place the U-bolt  around the handlebar , and thread the
ends through the handlebar base .
2 Tighten the nuts to secure the base.
NOTE: The recommended torque is 50 lbf-in. Do not exceed
torque of 80 lbf-in.
4 Thread the weather cap  through the top hole and press it
into the hole.
Installing the Handlebar Base to the Clutch/Brake-Clamp
Bracket
1 Remove the two factory bolts on your clutch/brake-clamp
bracket .
Getting Started
2 Tilt the device back until it snaps into place.
Removing Your Device from the Motorcycle
Mount
Attaching the Base Plate to the Motorcycle Mount
1 Thread the M4 x 40 mm panhead screws  through the
washers , cradle , spacers , and base plate .
1 Press the button on the side of the mount.
2 Lift out the device.
3 On the motorcycle mount, place the weather cap on the
power connector in the center of the cable (page 1).
Mounting Your Device in an Automobile
NOTICE
Before mounting the device, check the local laws pertaining to
windshield mounting.
2 Tighten the nuts to secure the base plate.
Attaching the Base Plate to the Handlebar Base
1 Align the ball of the handlebar base  and the ball of the
base plate  with the double-socket arm .
Insert the ball into the double-socket arm.
Tighten the knob slightly.
Adjust for optimal viewing and operation.
Tighten the knob to secure the mount.
Align the ball of the base plate attached to the cradle  with
the other end of the double-socket arm.
7 Repeat steps 2–4.
Installing Your Device in the Motorcycle Mount
1 Fit the bottom of your device into the cradle.
WARNING
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Do not use the suction cup mount on a motorcycle.
1 Pull back the weather cap on the back of the cradle.
2 Plug the automotive power cable  into the mini-USB
connector  under the weather cap.
3 Remove the clear plastic from the suction cup.
4 Clean and dry your windshield and the suction cup with a
lint-free cloth.
Press the suction cup  to the windshield, and flip the lever
 back toward the windshield.
Snap the cradle  onto the suction cup arm.
Fit the bottom of your device into the cradle.
Tilt the device back until it snaps into place.
Plug the other end of the automotive power cable into a
power outlet.
Getting Started
About myDashboard
Use myDashboard to register your device, check for software
and map updates, access product manuals and support, and
more.
Setting Up myDashboard
1 Connect the USB cable to the USB port on the back of the
device.
2 Connect the USB cable to the USB port on your computer.
3 Go to www.garmin.com/‍dashboard.
4 Follow the on-screen instructions.
Registering the Device
1 Open myDashboard (page 3).
2 Click Register Now.
3 Follow the on-screen instructions.
Updating the Software
1 Open myDashboard (page 3).
2 Under Software Updates, click Update Now.
3 Follow the on-screen instructions.
nüMaps Guarantee™
To receive one free map update (if available), register your
device at http:​/‍​/‍my​.garmin​.com within 90 days of acquiring
satellites while driving with your device. You are not eligible for
the free map update if you register by phone or wait longer than
90 days after the first time you acquire satellites while driving
with your device. For more information, go to www.garmin.com
/‍numaps.
Updating Maps
1 Open myDashboard (page 3).
2 Register the device (page 3
3 Select an option:
• Under Map Updates, click Update Now.
• If a free map update is no longer available, click Buy
Now.
4 Follow the on-screen instructions.
Lifetime Subscriptions
Some models include subscriptions to lifetime features.
LT: This model includes a lifetime traffic subscription and a
traffic receiver (automobile mode only).
LM: This model includes a nüMaps Lifetime™ subscription
(page 15).
LMT: This model includes a nüMaps Lifetime subscription,
lifetime traffic subscription, and a traffic receiver (automobile
mode only).
Turning Off the Device
1 Hold the Power key .
NOTE: If you hold the Power key for less than 5 seconds,
the device enters sleep mode (page 3).
2 Select Off.
Resetting the Device
You can reset your device if it stops functioning.
Hold the Power key for 10 seconds.
About Sleep Mode
Use sleep mode to conserve battery power when your device is
not in use. Sleep mode uses very little power, and a battery
charge lasts for weeks when your device is in sleep mode.
Entering Sleep Mode
Press the Power key.
Exiting Sleep Mode
While the device is in sleep mode, press the Power key.
Adjusting the Screen Brightness
1 Select Settings > Display > Brightness.
2 Use the slider bar to adjust the brightness.
Adjusting the Volume
1 Select Volume.
2 Select an option:
• Use the slider bar to adjust the volume.
• Select to mute the device.
Status Bar Icons
The status bar is located at the top of the main menu. The
status bar icons display information about features on the
device. You can select some icons to change settings or view
additional information.
: GPS signal status.
: Bluetooth® technology status (appears when Bluetooth is
enabled).
: Transportation mode indicator.
: Current time.
: Battery status.
Acquiring GPS Signals
To navigate with your device, you must acquire satellites.
in
the status bar indicates the satellite signal strength (see
page 3). Acquiring satellites can take several minutes.
1 Turn on the device.
2 If necessary, go outdoors to an open area, away from tall
buildings and trees.
to view detailed information about the
3 If necessary, hold
satellite signals.
Viewing GPS Signal Status
Hold
for three seconds.
Transportation Modes
Motorcycle mode
Automobile mode
Off-road mode (See page 8)
Routing and navigation are calculated differently based on your
transportation mode.
Choosing a Transportation Mode
Select
Battery Information
After the device is connected to power, it begins to charge.
Getting Started
in the status bar indicates the status of the internal battery.
To increase the accuracy of the battery gauge, you should fully
discharge the battery and then fully charge it. Do not unplug the
device until it is fully charged.
Setting the Time
NOTE: You can select Automatic to automatically set the time
each time the device is powered on.
1 Select
Scroll
the
numbers
to set the time.
Using the On-Screen Buttons
•
•
•
•
•
Select
to return to the previous menu screen.
Hold
to quickly return to the main menu.
Select or to see more choices.
Hold or to scroll faster.
Select
to see a menu of options for the current screen.
Using the On-Screen Keyboard
See Language and Keyboard settings to change the keyboard
layout (page 14).
• Select a character on the keyboard to enter a letter or
number.
• Select a series of letters, such as "A-I," to select a letter in
that series.
• Select
to add a space.
• Select to delete a search entry.
• Select
to delete a character.
• Select to change the keyboard language mode.
• Select
to enter special characters, such as punctuation
marks.
• Select to change character capitalization.
About Shortcuts
Adding a Shortcut Icon
You can add shortcuts to the Where To? menu. A shortcut can
point to a location, a category, or a search tool.
The Where To? menu can contain up to 36 shortcut icons.
1 Select Where To? > Add Shortcut.
2 Select an item.
Removing a Shortcut
> Remove Shortcut(s).
1 Select Where To? >
2 Select the shortcut to remove.
3 Select the shortcut again to confirm.
Finding Locations
The device offers many methods for finding locations.
• By category (page 4).
• Near another location (page 4).
• By spelling the name (page 4).
• By address (page 5).
• Using recently found locations (page 5).
• Using coordinates (page 5).
• Using the map (page 5).
• Using saved locations (page 6).
About Locations
The detailed maps loaded in your device contain locations, such
as restaurants, hotels, and auto services. You can use
categories to browse for nearby businesses and attractions.
Finding a Location by Category
1 Select Where To?.
2 Select a category, or select Categories.
3 If necessary, select a subcategory.
4 Select a location.
Searching Within a Category
After you have performed a search for a point of interest, certain
categories may display a Quick Search list that shows the last
three destinations you selected.
1 Select Where To?.
2 Select a category, or select Categories.
3 Select a category.
4 If applicable, select a destination from the Quick Search list.
5 If necessary, select the appropriate destination.
Finding a Location Using the Search Bar
You can use the search bar to search for locations by entering a
category, brand name, address, or city name.
1 Select Where To?.
2 Select Enter Search in the search bar.
3 Enter all or part of the search term.
Suggested search terms appear below the search bar.
4 Select an option:
• To search for a type of business, enter a category name
(for example, "movie theaters").
• To search for a business name, enter all or part of the
name.
• To search for an address near you, enter the street
number and street name.
• To search for an address in another city, enter the street
number, street name, city, and state.
• To search for a city, enter the city and state.
• To search for coordinates, enter latitude and longitude
coordinates.
Select
an option:
• To search using a suggested search term, select the
term.
• To search using the text you entered, select .
6 If necessary, select a location.
Changing the Search Area
1 From the main menu, select Where To?.
2 Select Searching Near.
3 Select an option.
Reporting a Closed or Missing Location
If your search results include an outdated or incorrect location,
you can report the error to Garmin® and remove the location
from future searches.
Finding Locations
1
Search for a location (page 4).
From the search results, select a location.
Select .
Select
> Edit.
Select Report as Closed or Report as Missing.
The information is sent to Garmin when you connect your
device to myDashboard using your computer (page 3).
Rating a Point of Interest
You can assign a star rating to a point of interest.
1 Search for a location (page 4).
2 From the search results, select a location.
3 Select .
4 Select the stars to rate the point of interest.
The star rating updates on your device.
About Search Tools
You can search for locations by using the on-screen keyboard
or by entering the location address or coordinates.
Finding an Address
NOTE: The order of the steps may change depending on the
map data loaded on your device.
1 Select Where To? > Address.
2 Enter the address number, and select Done.
3 Enter the street name, and select Next.
4 If necessary, select Searching Near to change the city,
state, or province.
5 If necessary, select the city, the state, or the province.
6 If necessary, select the address.
Finding an Intersection
1 Select Where To? > Categories > Intersections.
2 Select a state or province.
NOTE: If necessary, select State or Country to change the
country, state, or province.
Enter the first street name, and select Next.
If necessary, select the street.
Enter the second street name, and select Next.
If necessary, select the street.
If necessary, select the intersection.
Finding a City
1 Select Where To? > Categories > Cities.
2 Select Enter Search.
3 Enter a city name, and select .
4 Select a city.
Finding a Location Using Coordinates
Before you can find a location using coordinates, you must add
a shortcut to the coordinates search tool (page 4).
You can find a location using latitude and longitude coordinates.
This can be helpful when geocaching.
1 Select Where To? > Categories > Coordinates.
2 If necessary, select > Format, select the correct
coordinate format for the type of map you are using, and
select Save.
3 Select the latitude coordinate.
4 Enter the new coordinate, and select Done.
5 Select the longitude coordinate.
6 Enter the new coordinate, and select Done.
Finding Locations
7 Select View on Map.
Finding a Location by Browsing the Map
Before you can find places included in the map data, such as
restaurants, hospitals, and fuel stations, you must enable the
map layer for places along the road (page 8).
1 Select View Map.
2 Drag and zoom the map to display the area to search.
3 If necessary, select , and select a category icon to view
only a specific category of places.
Location markers ( or a blue dot) appear on the map.
4 Select an option:
• Select a location marker.
• Select a point, such as a street, intersection, or address
location.
5 If necessary, select the location description to view additional
information.
Saving a Home Location
You can set your home location for the location you return to
most often.
> Set Home Location.
1 Select Where To? >
2 Select Enter My Address, Use Current Location, or
Recently Found.
The location is saved as "Home" in the Saved menu
(page 6).
Going Home
Select Where To? > Go Home.
Editing Your Home Location Information
You can change the address or phone number for a location
that appears in the search results.
1 Select Where To? > Saved > Home.
> Edit.
2 Select >
3 Enter your changes.
4 Select Done.
Finding Recently Found Destinations
Your device stores the last 50 destinations you have found.
1 Select Where To? > Recent.
2 Select a location.
Clearing the List of Recently Found Locations
Select Where To? > Recent >
> Clear > Yes.
Finding Parking
1 Select Where To? > Categories > Parking.
2 Select a parking location.
Finding Your Last Parking Spot
When you remove your device from the vehicle mount while the
device is on, your current location is saved as a parking spot.
Select Apps > Last Spot.
Setting a Simulated Location
If you are indoors or not receiving satellite signals, you can use
the GPS to set a simulated location.
1 Select Settings > Navigation > GPS Simulator.
2 From the main menu, select View Map.
3 Tap the map twice to select an area.
The address of the location appears at the bottom of the
screen.
4 Select the location description.
5 Select Set Location.
Saving Locations
Saving a Location
1 Search for a location (page 4) .
2 From the search results, select a location.
3 Select .
> Save.
4 Select
5 If necessary, enter a name, and select Done.
Saving Your Current Location
1 From the map, select the vehicle icon.
2 Select Save.
3 Enter a name, and select Done.
4 Select OK.
Starting a Route to a Saved Location
1 Select Where To? > Saved.
2 If necessary, select a category, or select All Saved Places.
3 Select a location.
4 Select Go!.
Editing a Saved Location
1 Select Where To? > Saved.
2 If necessary, select a category.
3 Select a location.
4 Select .
> Edit.
5 Select
6 Select an option:
•
•
•
•
Select Name.
Select Phone Number.
To assign categories to the Favorite, select Categories.
To save a photo with the Favorite, select Assign Photo
(page 6).
• To change the symbol used to mark the Favorite on a
map, select Change Map Symbol.
7 Edit the information.
8 Select Done.
Assigning Categories to a Saved Location
You can add custom categories to organize your saved
locations.
NOTE: Categories appear in the saved locations menu after
you have saved more than 12 locations.
1 Select Where To? > Saved.
2 Select a location.
3 Select .
> Edit > Categories.
4 Select
5 Enter one or more category names, separate by commas.
6 If necessary, select a suggested category.
7 Select Done.
Sharing a Saved Location
If you save the location of a business that is not in the map
data, you can share the location with Garmin® so that it can be
added to future map updates and shared with the Garmin
community.
1 Select Where To? > Saved.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select Share Place.
Sending a Location to the Device
You can send locations to your device from various online
sources, including http:​/‍​/‍connect​.garmin​.com.
1 Connect your device to your computer (page 3).
2 If necessary, install the Garmin Communicator Plugin. Go to
www.garmin.com/‍communicator for more information.
3 On your computer, find a location on a supported website.
4 From the website, select Send to GPS.
NOTE: Some websites may use a different button or link.
5 Follow the on-screen instructions.
Loading Photos for Navigation
You can load photo files that include location information onto
your device or memory card. Photos with location information
are assigned automatically to the "Photos" category (page 6).
• Transfer a photo file that includes location information from
your computer to your device (page 13).
• Go to http:​/‍​/‍connect​.garmin​.com​/‍photos or another supported
website, and send a photo to your device that includes
location information (page 6).
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1 Select Where To? > Saved.
> Delete Saved Places.
2 Select
3 Select the box next to the saved locations to delete, and
select Delete.
Navigation
Starting a Route
Search for a location (page 4).
Select a location.
Select Go!.
If necessary, select a route.
Changing the Route Calculation Mode
The route calculation is based on road speeds and vehicle
acceleration data for a given route. The calculation mode affects
only automobile routes.
Select Settings > Navigation > Calculation Mode.
• Select Faster Time to calculate routes that are faster to
drive but can be longer in distance.
• Select Shorter Distance to calculate routes that are
shorter in distance but can take more time to drive.
• Select Less Fuel to calculate routes that could use less
fuel than other routes.
• Select Off Road to calculate point-to-point routes (without
roads).
Previewing Multiple Routes
1 Search for a location (page 4).
2 From the search results, select a location.
3 Select Routes.
4 Use the on-screen buttons to select a route.
5 Select Go!.
Starting a Route to a Saved Location
1 Select Where To? > Saved.
Navigation
2 If necessary, select a category, or select All Saved Places.
3 Select a location.
4 Select Go!.
Your Route on the Map
The route is marked with a magenta line. A checkered flag
marks your destination.
As you travel, the device guides you to the destination with
voice prompts, arrows on the map, and directions at the top of
the map. If you depart from the original route, the device
recalculates the route and provides new directions.
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature (page 14).
Using the myTrends™ feature, your device predicts your
destination based on your travel history, the day of the week,
and the time of day. After you have driven to a saved location
several times, the location may appear in the navigation bar on
the map, along with the estimated time of travel, and traffic
information.
Select the navigation bar to view a suggested route to the
location.
About Exit Services
While you navigate a route, you can find gas, food, lodging, and
restrooms near upcoming exits.
Services are listed under tabs by category.
Gas
Food
Using the Navigation Map
1 From the main menu, select View Map.
2 If the zoom controls are hidden, select the map to display the
zoom controls.
3 Select the map.
4 Select an option:
• To zoom in or out, select
or .
• To rotate the map view, select .
• To switch between North Up and 3-D views, select .
• To add or remove map layers, select
• To view specific categories, select .
• To center the map on your current location, select .
• To view shortcuts for map and navigation features, select
Adding a Point to a Route
Before you can add a stop, you must be navigating a route.
1 From the map, select > Where To?.
2 Search for the extra stop.
3 Select the stop from the search results.
4 Select Go!.
5 Select Add to Active Route.
Taking a Detour
While navigating a route, you can use detours to avoid
obstacles ahead of you, such as construction zones.
While navigating, select
> Detour.
Stopping the Route
From the map, select
Updating Speed Limits
NOTICE
The speed limit feature is for information only and does not
replace your responsibility to abide by all posted speed limit
signs and to use safe driving judgment at all times. Garmin will
not be responsible for any traffic fines or citations you receive
for failing to follow all applicable traffic laws and signs.
An icon displaying the current speed limit may appear as you
travel on major roadways.
1 From the map, select > Set Speed Limit.
and
to set the speed limit.
2 Select
Navigation
Lodging
Restrooms
Finding Exit Services
1 From the map, select > Exit Services.
2 Use the arrows to select an upcoming exit.
3 Select an exit service tab.
4 Select a point of interest.
Navigating to an Exit
1 From the map, select
2 Select Go!.
> Exit Services >
Avoiding Road Features
1 Select Settings > Navigation > Avoidances.
2 Select the road features to avoid on your routes, and select
Save.
About Custom Avoidances
Custom avoidances allow you to avoid specific areas and
sections of road. You can enable and disable custom
avoidances as needed.
Avoiding an Area
1 Select Settings > Navigation > Custom Avoidances.
2 If necessary, select Add Avoidances.
3 Select Add Avoid Area.
4 Select the upper-left corner of the area to avoid, and select
Next.
5 Select the lower-right corner of the area to avoid, and select
Next.
The selected area is shaded on the map.
6 Select Done.
Avoiding a Road
1 Select Settings > Navigation > Custom Avoidances.
2 Select Add Avoid Road.
3 Select the starting point of the section of road to avoid, and
select Next.
4 Select the ending point of the road section, and select Next.
5 Select Done.
Disabling a Custom Avoidance
You can disable a custom avoidance without deleting it.
1 Select Settings > Navigation > Custom Avoidances.
2 Select an avoidance.
> Disable.
3 Select
Deleting Custom Avoidances
1 Select Settings > Navigation > Custom Avoidances.
2 Select an option:
• To delete all custom avoidances, select .
• To delete one custom avoidance, select the avoidance,
and select
> Delete.
Enabling Advanced Detours
Select Settings > Navigation > Advanced Detours.
Taking a Detour Around Specified Areas
You can take a detour for a specified distance along your route
or detour around specific roads. This is useful if you encounter
construction zones, closed roads, or poor road conditions.
1 Select a destination, and select Go! (page 4).
2 From the map, select > Detour.
3 Select Next 0.5mi on Route, Next 2mi on Route, Next 5mi
on Route, or Detour by Road(s) on Route.
4 If necessary, select a road to detour around.
Navigating Off Road
If you are not following roadways as you navigate, you can use
Off Road mode.
1 Select Settings > Navigation.
2 Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the
location.
Removing Buttons from the Map
You can remove all buttons from the right side of the map.
1 Select Settings > Map & Vehicle > Map Buttons.
2 Select an icon, and select OK.
3 Select Save.
Changing the Map Dashboard
The dashboard displays trip information at the bottom of the
map. You can select different dashboards to change the style
and the layout of the information.
1 Select Settings > Map & Vehicle > Dashboards.
2 Use the arrows to select a dashboard.
3 Select Save.
Changing the Map Perspective
1 Select Settings > Map & Vehicle > Driving Map View.
2 Select an option:
• Select Track Up to display the map in two dimensions (2D), with your direction of travel at the top.
• Select North Up to display the map in 2-D with North at
the top.
• Select 3-D to display the map in three dimensions.
Viewing Turns
Viewing a List of Turns
When you are navigating a route, you can view all of the turns
and maneuvers for your entire route and the distance between
turns.
1 While navigating a route, select the text bar on the top of the
map.
2 Select a turn.
Map Pages
Customizing the Map
Customizing the Map Layers
You can customize which data appear on the map, such as
icons for points of interest and road conditions.
1 From the map, select .
2 Select Map Layers.
3 Select which layers you want to include on the map, and
select Save.
Viewing the Trip Log
Your device keeps a trip log, which is a record of the path you
have traveled.
1 Select Settings > Map & Vehicle > Map Layers.
2 Select the Trip Log check box.
Changing the Map Data Field
1 From the map, select the data field in the lower left-hand
corner.
2 Select a type of data to display.
3 Select Save.
Customizing Map Buttons
You can include up to two icons on the right side of the main
map.
1 Select Settings > Map & Vehicle > Map Buttons.
2 Select an icon, and select OK.
3 Select .
4 Select a different icon.
The details for the turn appear. If available, an image of the
junction appears for junctions on major roadways.
Viewing the Entire Route on the Map
1 While navigating a route, select the navigation bar at the top
of the map.
2 Select > Map.
Viewing the Next Turn
While navigating an automobile route, a preview of the next
turn, lane change, or other maneuver appears in the upper-left
corner of the map.
The preview includes the distance to the turn or maneuver and
the lane in which you should be traveling, if available.
From the map, select
to view the next turn on the map.
Viewing Junctions
While navigating a route, you can view the junctions on major
roadways. When you approach a junction in a route, the image
of that junction appears briefly, if available.
From the map, select
to view the junction, if available.
Viewing Traffic Alerts
While you navigate an automobile route, a traffic alert may
appear in the navigation bar.
Select the alert to view more information.
Map Pages
Viewing Trip Information
The trip information page displays your present speed and
provides statistics about your trip.
NOTE: If you make frequent stops, leave the device turned on,
so it can accurately measure elapsed time during the trip.
From the map, select
> Trip Computer.
• Select Add Headset.
• If you have already paired a different headset, select
Settings > Bluetooth > Add Headset.
On
your headset, enable Bluetooth wireless technology.
5 On your device, select OK.
A list of nearby Bluetooth devices appears.
6 Select your headset from the list, and select OK.
7 If necessary, confirm that the device is allowed to connect.
8 If necessary, enter the device Bluetooth PIN (0000) into your
headset.
Your device will send navigation prompts to your headset while
you navigate a route.
Deleting a Paired Headset
Resetting Trip Information
1 From the map, select > Trip Computer.
2 Select > Reset Field(s).
3 Select an option:
• When not navigating a route, select Select All to reset
every data field except the speedometer, on the first
page.
• Select Reset Trip Data to reset the information on the trip
computer.
• Select Reset Max. Speed to reset the maximum speed.
• Select Reset Trip B to reset the odometer.
Viewing Current Location Information
You can use the Where Am I? page to view information about
your current location. This feature is helpful if you need to tell
emergency personnel your location.
From the map, select
> Where Am I?.
Finding Nearby Services
You can use the Where Am I? page to find nearby services,
such as hospitals or police stations.
> Where Am I?.
1 From the map, select
2 Select a category.
You can delete a paired headset to prevent it from automatically
connecting to your device in the future.
1 Select Settings > Bluetooth > Headset.
2 Select .
3 Select the headset, and select Delete.
Disconnecting Your Headset
1 Select Settings > Bluetooth.
2 Select Headset > None > Save.
3 Select Yes.
Your headset is disconnected from your device but remains
paired with your device.
Tips After Pairing the Devices
• After the initial pairing, the two devices can connect
automatically each time you turn them on.
• When your phone is connected to your device, you are ready
to make phone calls.
• When you turn on the device, it tries to connect to the last
phone to which it was connected.
• You might need to set your mobile phone to connect to the
device automatically when the device is turned on.
Using the Apps
Getting Directions to Your Current Location
If you need to tell another person how to get to your current
location, your device can give you a list of directions.
Select Apps > Where Am I? >
> Directions to Me.
Hands-Free Voice Prompts
Using Help
Select Apps > Help to view information about using the
device.
Searching Help Topics
Select Apps > Help >
About Wireless Headsets
Planning a Trip
Using wireless technology, your device can send audio
navigation prompts to a wireless headset. For more information,
go to www.garmin.com/‍bluetooth
You can use the trip planner to create and save a trip with
multiple destinations.
1 Select Apps > Trip Planner.
2 Select New Trip.
3 Select Select Start Location.
4 Search for a location (page 4).
5 Select Select.
6 To add additional locations, select .
7 Select Next.
8 Enter a name, and select Done.
Enabling Bluetooth Wireless Technology
1 Select Settings > Bluetooth.
2 Select Bluetooth.
Pairing a Wireless Headset
Before you can receive navigation prompts through your
headset, you must pair your device with a compatible mobile
headset.
1 Place your headset and your Bluetooth device within 33 ft.
(10 m) of each other.
2 On your device, enable wireless technology.
3 Select an option:
Hands-Free Voice Prompts
Scheduling a Trip
You can use the trip planner to create and save a trip with
multiple destinations.
1 Select Apps > Trip Planner.
2 Select a trip.
3 Select a location.
4 Select Departure Time (or Arrival Time if the location is not
the first stop in the trip).
5 Select a date and time, and select Save.
6 Select Duration.
7 Select the amount of time you will spend at the location, and
select Save.
8 If necessary, repeat steps 3–7 for each location.
Changing Transportation Modes in a Trip
You can change the transportation modes used to travel in a
saved trip.
1 Select Apps > Trip Planner.
2 Select a trip.
> Transportation Mode.
3 Select
4 Select a transportation mode.
5 Select Save.
Navigating to a Saved Trip
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select Go!.
4 If prompted, select a route (page 7).
Editing a Saved Trip
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select .
4 Select an option:
• Select Rename Trip.
• Select Edit Destinations to add and delete location, or to
change the order of locations.
• Select Delete Trip.
• Select Optimize Order to arrange the stops on your trip
in the most-efficient order.
TracBack®
Following Your Recent Track
The TracBack feature records a track of your recent movement.
You can retrace your recent track back to where you started.
1 Select Apps > TracBack.
Your recent track appears on the map.
2 Select Go!.
Saving Your Recent Track as a Trip
You can save your recent track as a trip, which you can
navigate later using the trip planner (page 10).
1 Select Apps > TracBack.
Your recent track appears on the map.
> Save as Trip.
2 Select
3 Enter a name, and select Done.
Using the Compass
You can navigate using a GPS compass.
Select Apps > Compass.
Viewing Previous Routes and Destinations
Before you can use this feature, you must enable the travel
history feature (page 14).
10
You can view your previous routes and places you have
stopped on the map.
Select Apps > Where I've Been.
Logging Service History
You can log the date and odometer reading when service or
maintenance is performed on your vehicle. The device provides
several service categories, and you can add custom categories
(page 10).
1 Select Apps > Service History.
2 Select a service category.
3 Select Add Record.
4 Enter the odometer reading, and select Next.
5 Enter a comment (optional).
6 Select Done.
Adding Service Categories
1 Select Apps > Service History.
> Add Category.
2 Select
3 Enter a category name, and select Done.
Deleting Service Categories
When you delete a service category, all service records in the
category are also deleted.
1 Select Apps > Service History.
> Delete Categories.
2 Select
3 Select the service categories to be deleted.
4 Select Delete.
Renaming Service Categories
Select Apps > Service History.
Select the category to be renamed.
Select Rename Category.
Enter a name, and select Done.
Deleting Service Records
1 Select Apps > Service History.
2 Select a service category.
3 Select > Delete Records.
4 Select the service records to be deleted.
5 Select Delete.
Editing a Service Record
You can edit the comment, odometer reading, and date of a
service record.
1 Select Apps > Service History.
2 Select a category.
3 Select a field.
4 Enter the new information, and select Done.
Using the World Clock
1 Select Apps > World Clock.
2 If necessary, select a city, enter a city name, and select
Done.
Viewing the World Map
Apps > World Clock > .
Nighttime hours appear in the shaded area of the map.
Setting an Alarm
1 Select Apps > Alarm Clock.
2 Set a time.
Using the Apps
3 Select the Alarm On check box.
Using the Language Guide
Using the Calculator
Use the Language Guide to look up and translate words or
phrases.
Select Apps > Language Guide.
Select Apps > Calculator.
Converting Units
Select Apps > Unit Converter.
If necessary, select the button next to Convert, select a
measurement category, and select Save.
If necessary, select a unit button, select a unit of
measurement, and select Save.
Select the field below the unit you want to convert.
Enter the number, and select Done.
Setting Currency Conversion Rates
This feature is not available in all areas.
You can update the currency conversion rates for the unit
converter.
1 Select Apps > Unit Converter.
2 Select the button next to Convert.
3 Select Currency, and select Save.
4 If necessary, select a currency button, select a different
currency, and select Save.
5 Select the button at the bottom of the screen that displays
the currency conversion rates.
6 Select the box next to a currency.
7 Enter a value, and select Done.
8 Select OK.
About Offers
If your device package includes a traffic receiver, you will
receive location-relevant offers and coupons. Ad-based traffic
information is available only in North America.
NOTE: The traffic receiver must be connected to external power
and you must be in a coverage area to receive ad-based traffic
information.
See our privacy statement at www.garmin.com/‍privacy.
Viewing Offers
CAUTION
Do not attempt to write down the coupon codes while driving.
This feature is available only if you are using an ad-supported
lifetime traffic receiver.
1 Select an offer that appears on the screen to search for the
nearest location related to that offer.
2 If available, select to view coupon information.
3 Write down this code and present it when you arrive at the
location.
Viewing an Offer List
This feature is available if you are using an ad-supported
lifetime traffic receiver.
Select Apps > Offers to view a list of the offers you have
received.
Purchasing the Language Guide
Your device comes with a limited demonstration version of the
language guide.
To purchase the full language guide, go to www.garmin.com
/‍languageguide.
Selecting Languages in the Language Guide
You can select the languages you want to translate when
translating words and phrases.
1 Select Apps > Language Guide.
2 Select > Language.
3 Select From, select the language to translate from, and
select Save.
4 Select To, select the language to translate to, and select
Save.
Translating Words and Phrases
1 Select Apps > Language Guide.
2 Select a category and subcategories.
3 If necessary, select , enter a keyword, and select Done.
4 Select a word or a phrase.
to listen to the translation.
5 Select
Using a Bilingual Dictionary
1 Select Apps > Language Guide > Bilingual Dictionaries.
2 Select a dictionary.
3 If necessary, select , enter a word, and select Done.
4 Select a word.
to listen to the translation.
5 Select
Traffic
Receiving Traffic Data
NOTICE
Heated (metallized) windshields could degrade the performance
of the traffic receiver.
Before you can receive traffic data, you must purchase a
compatible Garmin traffic receiver accessory. Go to
http:​/‍​/‍my​.garmin​.com for more information.
When the receiver is within a traffic coverage area, your device
will begin displaying traffic information.
The traffic receiver and the device may need to be in data range
of an FM station transmitting traffic information.
1 Connect the traffic receiver to an external power source.
2 Connect the traffic receiver to the device.
Traffic Receiver
Disabling Traffic and Offers
1 Select Traffic > Traffic.
2 Clear the Traffic check box.
The device no longer receives live traffic data, but
automobile routes still avoid potentially congested areas
using trafficTrends™, if enabled. See page 14.
Traffic


Mini-USB connector
External antenna connector
11



Internal antenna
Understanding Traffic Data
Power LED
The traffic legend explains the icons and colors used on the
traffic map.
1 From the map, select > Traffic.
2 Select Traffic Legend .
Vehicle power adapter
About the Traffic Icon
When you are receiving traffic information, a traffic icon appears
on the map. The traffic icon changes color to indicate the
severity of traffic conditions.
Green: Traffic is flowing freely.
Yellow: Traffic is moving, but there is a delay. There is
moderate traffic congestion.
Red: Traffic is not moving or moving very slowly. There is a
severe delay.
Gray: Traffic information is not available.
Traffic on Your Route
When calculating your route, the device examines the current
traffic and automatically optimizes the route for the shortest
time. If a severe traffic delay occurs on your route while you are
navigating, your device automatically recalculates the route.
The traffic icon
changes color to indicate the severity of
traffic conditions on your route or on the road you are currently
traveling.
Your device may route you through a traffic delay if a better
alternative route does not exist. The delay time is added into
your estimated time of arrival automatically.
Viewing Traffic on Your Route
1 While navigating a route, select
2 Select Traffic on Route.
A list of traffic events appears, organized by their location on
the route.
3 Select an event.
Manually Avoiding Traffic on Your Route
1 From the map, select
2 Select Traffic on Route.
3 If necessary, use the arrows to view other traffic delays on
your route.
> Avoid.
Traffic Subscriptions
Subscription Activation
You do not need to activate the subscription included with your
FM traffic receiver. The subscription activates automatically
after your device acquires satellite signals while receiving traffic
signals from the pay service provider.
Adding a Subscription
You can purchase traffic subscriptions for other regions or
countries.
1 From the main menu, select Traffic.
2 Select an option:
• For non-North American units, select Subscriptions > .
• For North American units, select Add Phone.
3 Write down the FM traffic receiver unit ID.
4 Go to www.garmin.com/‍fmtraffic to purchase a subscription
and get a 25-character code.
The traffic subscription code cannot be reused. You must
obtain a new code each time you renew your service. If you
own multiple FM traffic receivers, you must obtain a new
code for each receiver.
5 Select Next on the device.
6 Enter the code.
7 Select Done.
Disabling Traffic
1 Select Traffic > Traffic.
2 Clear the Traffic check box.
The device no longer receives live traffic data, but will still avoid
potentially congested areas using routes still avoid potentially
congested areas using trafficTrends, if enabled (page 14).
4 Select
Taking an Alternate Route
1 While navigating an automobile route, select
2 Select Alternate Route.
3 Select a route.
Data Management
Viewing Traffic on the Map
The traffic map shows color-coded traffic flow and delays on
nearby roads.
1 From the map, select
2 Select Traffic Conditions.
Traffic in Your Area
Searching for Traffic Delays
1 From the map page, select
2 Select Traffic Conditions > .
3 Select an item in the list.
4 If there is more than one delay, use the arrows to view
additional delays.
Viewing a Traffic Incident on the Map
1 From the map, select
2 Select Traffic Conditions.
3 Select a traffic icon.
12
About Data Management
You can store files, such as JPEG image files, on your device.
The device has a memory card slot for additional data storage.
NOTE: The device is not compatible with Windows® 95, 98,
Me, Windows NT®, and Mac® OS 10.3 and earlier.
File Types
The device supports these file types.
• Maps and GPX waypoint files from myGarmin™ mapping
software, includingMapSource®, BaseCamp™, and
HomePort™ (page 16).
• GPI custom POI files from Garmin POI Loader (page 16)
About Memory Cards
You can purchase memory cards from an electronics supplier,
or purchase pre-loaded Garmin mapping software
(www.garmin.com/‍trip​_‍planning). In addition to map and data
storage, the memory card can be used to store files such as
maps, images, geocaches, routes, waypoints, and custom
POIs.
Installing a Memory Card
The device supports microSD™ and microSDHC memory cards.
Data Management
1 Insert a memory card into the slot on the device.
2 Press it in until it clicks.
Connecting the Device to Your Computer
You can connect the device to your computer using the USB
cable included with your device.
NOTE: The first time you connect your device to your Windows
computer, you will be prompted to install the myGarmin Agent
software. Go to www.garmin.com/‍agent for more information.
1 Plug the small end of the USB cable into the port on the
device.
2 Plug the larger end of the USB cable into an available USB
port on your computer.
A picture of your device connected to a computer appears on
the device screen.
On a Windows computer, your device appears in My Computer
as either a portable device or as two removable drives
representing the device and the memory card.
Transferring Data From Your Computer
1 Connect the device to your computer (page 13).
Your device and memory card appear as removable drives in
My Computer in Windows and as mounted volumes on Mac
computers.
NOTE: Some computers with multiple network drives cannot
display device drives. See your operating system Help file to
learn how to map the drive.
On your computer, open the file browser.
Select the file.
Select Edit > Copy.
Open the Garmin or memory card drive or volume.
Select Edit > Paste.
The file appears in the list of files in the device memory or on
the memory card.
Disconnecting the USB Cable
If your device is connected to your computer as a removable
drive or volume, you must safely disconnect your device from
your computer to avoid data loss. If your device is connected to
your Windows computer as a portable device, it is not
necessary to safely disconnect.
1 Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the Trash.
2 Disconnect the cable from your computer.
Deleting Files
NOTICE
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
Open the Garmin drive or volume.
If necessary, open a folder or volume.
Select a file.
Press the Delete key on your keyboard.
Customizing the Device
Map and Vehicle Settings
Vehicle: Changes the icon to represent your position on the
map. Go to www.garmingarage.com for more icons.
Driving Map View: Sets the perspective on the map.
Pedestrian Map View: Sets the perspective on the map.
Map Detail: Sets the level detail on the map. More detail may
cause the map to draw slower.
Map Theme: Changes the color of the map data.
Map Buttons: Sets which icons are included on the map. Up to
three icons can be included on the map.
Map Layers: Sets the data that appears on the map page
(page 8).
Dashboards: Sets the map dashboard layout.
myMaps: Sets which installed maps the device uses.
Enabling Maps
You can enable map products that are installed on your device.
TIP: To purchase additional map products, go to
www.garmin.com/‍us​/‍maps.
1 Select Settings > Map & Vehicle > myMaps.
2 Select a map.
Navigation Settings
Select Settings > Navigation.
Calculation Mode: Sets route preference.
Off-Route Recalculation: Select how your device recalculates
a route if you deviate from the route.
Avoidances: Sets road features to avoid on a route.
Custom Avoidances: Allows you to avoid specific roads or
areas.
Advanced Detours: Sets the length of the detour.
Limit Walking: Controls the maximum walking distance
included in a pedestrian route.
Public Transit: Enables or disables transit types.
Safe Mode: Disables all functions that require significant
operator attention and could become a distraction while
driving.
GPS Simulator: Stops the device from receiving a GPS signal,
and saves battery power.
Route Preferences
Select Settings > Navigation > Calculation Mode.
The route calculation is based on road speeds and vehicle
acceleration data for a given route.
Faster Time: Calculates routes that are faster to drive but can
be longer in distance.
Shorter Distance: Calculates routes that are shorter in distance
but can take more time to drive.
Less Fuel: Calculates routes that could use less fuel than other
routes.
Off Road: Calculates a direct line from your location to your
destination.
Display Settings
Select Settings > Display.
Color Mode: Changes the brightness of the screen. Decreasing
the brightness can save battery power.
Display Timeout: Sets the amount of idle time before your
device enters sleep mode.
Screenshot: Allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the
device storage.
Select Settings > Map & Vehicle.
Customizing the Device
13
Bluetooth Settings
Select Settings > Bluetooth.
Bluetooth: Enables Bluetooth wireless technology.
Add Phone or Phone: Manages connection between your
device and mobile phones with Bluetooth wireless
technology.
Friendly Name.: Allows you to enter a friendly name that
identifies your devices with Bluetooth wireless technology.
Managing the Bluetooth Device List
You can add, disconnect, or delete phones that your device
detects while Bluetooth is enabled.
1 Select Settings > Bluetooth > Phone.
2 Select an option:
• Select a phone for your device to connect with.
• Select to add a phone to the menu.
• Select to delete a phone from the device memory.
• Select None to drop your current connection.
Disabling Bluetooth
1 Select Settings > Bluetooth.
2 Select Bluetooth.
Traffic Settings
NOTE: Changing the text language does not change the
language of user-entered data or map data, such as street
names.
Keyboard Language: Sets the language for your keyboard.
Keyboard Layout: Sets the keyboard layout.
Device and Privacy Settings
Select Settings > Device.
About: Displays the software version number, the unit ID
number, and information on several other software features.
EULAs: Displays the end-user license agreements that apply to
your choice.
NOTE: You need this information when you update the
system software or purchase additional map data
(page 15).
Position Reporting: Allows the device to collect your speed,
direction, and location information and share it with strategic
partners and service providers.
Travel History: Allows the device to record information for the
myTrends (page 7), Where I’ve Been (page 10) and Trip Log
(page 8) features.
Proximity Alerts Settings
Select Traffic > Traffic.
Traffic: Enables traffic.
Subscriptions: Lists current traffic subscriptions.
trafficTrends: See page 14.
Select Settings > Proximity Alerts.
Audio: Sets the style of alert that plays when you approach
proximity points.
Alerts: Sets the type of proximity points for which alerts are
played.
About Traffic Subscriptions
Restoring Settings
You can purchase additional subscriptions or a renewal if you
subscription expires. Go to www.garmin.com/‍traffic.
Viewing Traffic Subscriptions
Select Settings > Traffic > Subscriptions.
trafficTrends
When the trafficTrends feature is enabled, your device records
historic traffic data and uses that data to calculate more-efficient
routes.
When you drive with the trafficTrends feature enabled, your
device records traffic data that is used to improve the
trafficTrends historical traffic information. This information is
sent to Garmin when you connect your device to myGarmin
using your computer.
NOTE: Different routes may be calculated based on traffic
trends for the day of the week or the time of day.
Disabling trafficTrends
To prevent your device from recording or sharing traffic data,
you must disable trafficTrends.
Select Settings > Traffic > trafficTrends.
Units and Time Settings
Select Settings > Units & Time.
Current Time: Sets the device time.
Time Format: Allows you to select a 12-hour, 24-hour, or UTC
display time.
Units: Sets the unit of measure used for distances.
Language and Keyboard Settings
Select Settings > Language & Keyboard
Voice Language: Sets the language for voice prompts.
Text Language: Sets all on-screen text to the selected
language.
14
You can restore a category of settings or all settings to the
factory default values.
1 Select Settings.
2 If necessary, select a settings category.
3 Select > Restore
Appendix
Power Cables
Your device can be powered three ways.
• Motorcycle power cable
• Vehicle power cable
• USB cable
• AC adapter (optional accessory)
Charging the Device
You can charge the battery in the device using any of these
methods:
• Connect the device to the vehicle power cable.
• Connect the device to the motorcycle power cable
• Connect the device to a computer using the included USB
cable.
• Connect the device to an optional power adapter accessory,
such as a wall power adapter.
About Device Care
NOTICE
Avoid dropping your device.
Appendix
NOTICE
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
NOTICE
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Cleaning the Outer Casing
1 Clean the outer casing of the device (not the touchscreen)
using a cloth dampened with a mild detergent solution.
2 Wipe the device dry.
Cleaning the Touchscreen
1 Use a soft, clean, lint-free cloth.
2 If necessary, use water, isopropyl alcohol, or eyeglass lens
cleaner.
3 Apply the liquid to the cloth.
4 Gently wipe the screen with the cloth.
Use the mounting disk to mount your device to the dashboard
and comply with certain state regulations. See www.garmin.com
for more information.
1 Clean and dry the dashboard where you are placing the disk.
2 Remove the backing from the adhesive on the bottom of the
disk.
3 Place the disk on the dashboard.
4 Remove the clear plastic cover from the top of the disk.
5 Place the suction cup mount on top of the disk.
6 Flip the lever down (toward the disk).
Removing the Device, Cradle, and Mount
Removing the Device from the Cradle
1 Press the tab on the top of the cradle.
2 Tilt the device forward.
Avoiding Theft
Removing the Cradle from the Mount
1 Turn the cradle to the right or left.
2 Apply pressure until the socket on the cradle releases the
• Remove the device and mount from sight when not in use.
• Remove the residue left on the windshield by the suction
cup.
• Do not keep your unit in the glove compartment.
• Register your device at http:​/‍​/‍my​.garmin ​.com.
Removing the Suction Cup Mount from the
Windshield
1 Flip the lever on the suction cup mount toward you.
2 Pull the tab on the suction cup toward you.
Extending the Battery Life
•
•
•
•
•
•
•
Keep your device away from extreme temperatures.
Put the device in sleep mode (page 3).
Decrease the screen brightness (page 13).
Do not leave your device in direct sunlight.
Decrease the volume (page 3).
Disable Bluetooth (page 14).
Shorten the display timeout time (page 13).
Changing the Fuse in the Vehicle Power
Cable
NOTICE
When replacing the fuse, do not lose any of the small pieces
and make sure they are put back in the proper position. The
vehicle power cable does not work unless it is assembled
correctly.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1 Unscrew the end piece .
ball on the mount.
Updating Maps
1 Open myDashboard (page 3).
2 Register the device (page 3).
3 Select an option.
• Under Map Updates, click Update Now.
• If a free map update is no longer available, click Buy
Now.
4 Follow the on-screen instructions.
About nüMaps Lifetime
Models with "LM" after the model number include subscriptions
to nüMaps Lifetime, which provides quarterly map updates for
the life of your device. For terms and conditions, go to
www.garmin.com/‍numapslifetime.
NOTE: If your device does not include a subscription to nüMaps
Lifetime, you can purchase one at www.garmin.com
/‍numapslifetime​.
Purchasing Additional Maps
1 Go to your device product page on the Garmin web site
(www.garmin.com).
2 Click the Maps tab.
3 Follow the on-screen instructions.
Safety Cameras
TIP: You may need to use a coin to remove the end piece.
Remove the end piece, the silver tip , and the fuse .
Install a 2 A fast-blow fuse.
Place the silver tip in the end piece.
Screw the end piece back into the vehicle power cable .
Mounting on Your Dashboard
NOTICE
The permanent mounting adhesive is extremely difficult to
remove after it is installed.
Appendix
NOTICE
Garmin is not responsible for the accuracy of or the
consequences of using a custom point of interest or a safety
camera database.
Safety camera information is available in some locations. Check
http:​/‍​/‍my​.garmin​.com for availability. For these locations, you
can purchase a subscription for safety camera information. The
subscription includes the locations of hundreds of safety
cameras. Your device alerts you when you are approaching a
safety camera and can warn you if you are driving too fast. The
data is updated at least weekly, so you can update your device
regularly to receive the most up-to-date information.
15
You can purchase a new region or extend an existing
subscription at any time. Each region that you purchase has an
expiration date.
Custom Points of Interest
Custom POIs are customized points on the map. They can
contain alerts that let you know if you are near a designated
point or if you are traveling faster than a specified speed.
Installing POI Loader Software
You can create or download custom POI lists on your computer
and install them on your device using POI Loader software.
1 Go to www.garmin.com/‍extras.
2 Click Services > POI Loader.
3 Install the POI Loader onto your computer.
Problem
Solution
I cannot see any new If you have several network drives mapped on
removable drives in your computer, Windows can have trouble
my list of drives.
assigning drive letters to your device drives.
Refer to your operating system Help file to learn
how to map or assign drive letters.
My phone will not
connect to the
device.
• From the main menu, select Settings >
Bluetooth. The Bluetooth field must be set to
Enabled.
• Turn on your phone and bring it within 33 feet
(10m) of the device.
• Go to www.garmin.com/‍bluetooth for more
help.
Using the POI Loader Help Files
For more information on the POI loader, refer to the Help file.
With the POI loader open, click Help.
Finding Extras
1 Select Where To? > Custom POIs.
2 Select a category.
Purchasing Accessories
Go to http:​/‍​/‍buy​.garmin​.com.
Troubleshooting
Problem
Solution
My device is not
acquiring satellite
signals.
• Verify the GPS simulator is turned off
(page 13).
• Take your device out of parking garages and
away from tall buildings and trees.
• Remain stationary for several minutes.
The suction cup will
not stay on my
windshield.
Clean the suction cup and windshield with
rubbing alcohol.
Dry with a clean, dry cloth.
Mount the suction cup (page 2).
The device does not • Check the fuse in the vehicle power cable
charge in my vehicle.
(page 15).
• Verify the vehicle is turned on and is
supplying power to the power outlet.
• Your device can only charge between 32° F
and 113° F (between 0° C and 45° C).
My battery does not To maximize the time between changes, turn
stay charged for very down the backlight (page 13).
long.
My battery gauge
does not seem
accurate.
Allow the unit to fully discharge, and fully charge
it (without interrupting the charge cycle).
How do I know my
When your device is in USB mass storage
device is in USB
mode, a picture of a device connected to a
mass storage mode? computer is shown on the device screen. Also,
you should see two new removable disk drives
listen in My Computer.
The device is
connected to the
computer, but it will
not go into mass
storage mode.
16
Disconnect the USB cable from your
computer.
Turn off the device.
Plug the USB cable into a USB port on your
computer and into your device.
The device automatically turns on and goes
into USB mass storage mode.
Verify your device is connected to a USB port
and not a USB hub.
Appendix
Index
Symbols
3-D map view 8
accessories 16
adding stops 7
advanced detours 8
alarm 10
alerts
audio 14
proximity points 14
safety cameras 14
traffic 8
audio, proximity points 14
avoidances
area 7
customizing 7
deleting 8
disabling 7
road 7
road features 7
battery
charging 3, 14
maximizing 15
Bluetooth devices 14
Bluetooth technology
disabling 14
disconnecting a headset 9
enabling 9
settings 14
brightness 3, 13
files
supported types 12
transferring 13
finding locations. See also locations
addresses 5
browsing the map 5
categories 4
cities 5
coordinates 5
intersections 5
using the map 5
. See also locations
fuse, changing 15
geocaching 5
going home 5
GPS 3
headset
disconnecting 9
pairing 9
help 9. See also product support
home
editing location 5
going 5
setting locations 5
icons, traffic 12
ID number 14
junction view 8
cables, power 14
calculator 11
cameras, safety 15
changing search area 4
charging the device 3, 14
cleaning the device 15
clock 10
compass 10
computer, connecting 13
converting
currency, converting 11
units 11
coordinates 5
coupon code 11
cradle, removing 15
current location 9
custom POIs 16
customizing, avoidances 7
customizing the device 13
keyboard
language 14
layout 14
map
data field 8
reporting errors 4
map perspective 8
map view
2-D 8
3-D 8
maps
browsing 5
detail level 13
nüMaps Guarantee 3
nuMaps Lifetime 15
nüMaps Lifetime 3
purchasing 15
theme 13
traffic conditions 12
updating 3, 15
viewing routes 8
memory card 12. See microSD card
microSD card, installing 12
motorcycle mount, cables 1, motorcycle
mount 1
dashboard mount 15
deleting
all user data 13
paired headset 9
service categories 10
service records 10
trips 10
destinations 10. See also locations
detours, advanced 8
device, registering 3
device care 14
directions 8
display settings 13
driving directions 8
EULAs 14
exit services, finding 7
extras
custom points of interest 16
safety cameras 15
Index
language
keyboard 14
voice language 14
latitude and longitude, coordinates 5
loading pictures 6
locations. See also locations
current 6, 9
recently found 5
saving 6
searching for 5
setting home 5
simulated 5
. See also locations
mounting the device
automobile 2
dashboard 15
motorcycle 1
removing from mount 2, 15
suction cup 15
myDashboard, updating software 3
myTrends, routes 7
navigation
off-road 8
photo 6
previewing routes 6
settings 13
next turn 8
nüMaps Guarantee 3
nuMaps Lifetime 15
nüMaps Lifetime 3
off-road navigation 8
offers
coupon code 11
viewing 11
on-screen buttons 4
pairing
deleting paired headset 9
headset 9
parking, last spot 5
POI 16. See also point of interest (POI)
POI Loader 16
points of interest (POI Loader) 16
points of interest (POI)
custom 16
extras 16
POI Loader 16
rating 5
Points of Interest (POI), Custom 16
power cables, changing the fuse 15
power key, turn off device 3
proximity points alerts, settings 14
Quick Search 4
rating points of interest 5
recently found locations 5
registering the device 3
removing cradle 15
renaming trips 10
reporting POI errors 4
resetting
device 3
trip data 9
restoring settings 14
routes
calculating 6
myTrends 7
preferences 13
previewing 6
recalculating 12
starting 6
stopping 7
suggested 7
viewing on the map 8
safety cameras, database 15
satellite signals
acquiring 3
viewing 3
saved locations
categories 6
deleting 6
editing 6
favorites 6
saving, current location 6
17
saving locations 6
screen, brightness 3
screenshot 13
search bar 4
service history
categories 10
deleting 10
editing 10
records 10
settings 13, 14
shortcuts
adding 4
removing 4
simulated locations 5
sleep mode
entering 3
exiting 3
software, version 14
speed limit, changing 7
stops, adding 7
subscriptions
nüMaps Lifetime 3
traffic 3
suction cup 15
theft, avoiding 15
18
time settings 4, 14
TracBack 10
traffic
activating a subscription 12
adding subscriptions 12
alerts 8
alternate route 12
avoiding 12
data 12
disabling 11, 12
icons 12
incidents 12
lifetime subscriptions 3
recalculating routes 12
receiver 11
route recalculations 12
searching for delays 12
trafficTrends 14
trafficTrends, disabling 14
transportation modes
automotive 3
changing 10
motorcycle 3
travel history 14
trip computer, resetting information 9
trip data, resetting 9
trip information, viewing 9
trip log, viewing 8
trip planner, editing a trip 10
turn list 8
unit converter 11
unit ID 14
updates
maps 15
software, updating 3
USB, disconnecting 13
user data, deleting 13
voice prompt 9
volume, adjusting 3
where am I? 9
Where Am I? 6
wireless headset 9
Index
www.garmin.com/support
913-397-8200
1-800-800-1020
0808 2380000
+44 870 850 1242
1-866-429-9296
43 (0) 3133 3181 0
00 32 2 672 52 54
00 45 4810 5050
00 358 9 6937 9758
00 331 55 69 33 99
0180 5 / 42 76 46 - 880
00 39 02 3669 9699
0800-0233937
815 69 555
00800 4412 454
+44 2380 662 915
00 35 1214 447 460
00 34 902 007 097
00 46 7744 52020
Garmin International, Inc.
1200 East 151st Street
Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park
Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Zangshu 2nd Road, Xizhi Dist.
New Taipei City, 221, Taiwan (R.O.C.)
© March 2012 Garmin Ltd. or its subsidiaries

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : EN-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Create Date                     : 2012:03:06 14:17:27-06:00
Creator Tool                    : AH Formatter V5.3 MR3 (5,3,2011,1116) for Windows (x64)
Modify Date                     : 2012:04:09 14:46:22-05:00
Metadata Date                   : 2012:04:09 14:46:22-05:00
Producer                        : Antenna House PDF Output Library 2.6.0 (Windows (x64))
Trapped                         : False
Format                          : application/pdf
Document ID                     : uuid:46f1ba7b-494e-4f84-9422-198226c002e8
Instance ID                     : uuid:75948493-285a-428e-a787-43cb6e28d9b0
Page Mode                       : UseOutlines
Page Count                      : 24
Creator                         : AH Formatter V5.3 MR3 (5,3,2011,1116) for Windows (x64)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: IPH-A2AMGB

Navigation menu