Garmin A2AVGC00 Connected Personal Navigation Device User Manual final part 2

Download:
Mirror Download [FCC.gov]
Document ID	1857766
Application ID	JAJhmdZlVXN6rV4v+HBrbQ==
Document Description	user manual final - part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	182.8kB (2284968 bits)
Date Submitted	2012-12-12 00:00:00
Date Available	2012-12-20 00:00:00
Creation Date	2012-11-30 14:02:31
Producing Software	iText 2.1.7 by 1T3XT
Document Lastmod	2012-11-30 14:02:31
Document Title	user manual final - part 2
Document Creator	pdfsam-console (Ver. 2.4.0e)

Garmin fleet 590
™
Quick Start Manual
October 2012
190-01505-01_0B.indd 1
190-01505-01_0B
Printed in Taiwan
10/17/2012 1:58:32 PM
Fleet Subscription
Before you can use the fleet
management features on the device,
your company must have an active
fleet subscription.
Connecting the Device to
Vehicle Power
1. Plug the vehicle power cable ➊
into the USB port on the mount
➋.
➋
➌
➊ ➍
 WARNING
This product contains a lithium-ion
2. Snap the mount onto the suction
battery. To prevent the possibility of
cup ➌.
personal injury or product damage
3. Press the suction cup to the
caused by battery exposure to extreme
windshield.
heat, store it out of direct sunlight.
4. While pressing, flip the lever ➍
back toward the windshield.
NOTICE
In order for the device to receive fleet 5. Fit the bottom of your device into
the mount.
management information, do not
unplug the power cable.
6. Tilt your device back until it snaps
into place.
Before you use your device on battery
power, you should charge it.
190-01505-01_0B.indd 2
Garmin fleet 590 Quick Start Manual
10/17/2012 1:58:32 PM
7. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle.
Turning Off the Device
1. Hold the Power key ➊ for four
seconds.
➊
Using the Main Menu
➋
➍
➌
➎
• Select ➊ to enter the time
clock.
• Select ➋ to access messages
and stops.
Garmin fleet 590 Quick Start Manual
190-01505-01_0B.indd 3
New Stops and
Messages
Your device displays notifications
when you receive new stops or
messages.
2. Select Off.
➊
• Select ➌ to view the map.
• Select ➍ to find a destination.
• Select ➎ to open the menu of
tools and settings.
• On the main menu, a
notification indicates when
you have new stops,
messages, or (
) both.
• On the map, or appears
blue when you have new stops
or messages.
• On the tab or the
tab,
indicates the number of
new stops or messages.
10/17/2012 1:58:33 PM
◦◦ A blue notification
indicates that new stops
or messages have arrived
since the last time you
viewed the list of stops or
messages.
◦◦ A gray notification
indicates that you have
unread messages or stops.
Navigating to a Stop
Before you can navigate to a stop,
your company must send a stop to
your device.
1. From the main menu, select
Dispatch > .
2. Select a stop.
3. Select Go!.
190-01505-01_0B.indd 4
Viewing a Message
Before you can view a message, your
company must send a message to
your device.
1. From the main menu, select
Dispatch >
2. Select a message.
Sending a Message
You can send a short message to your
company. Your device may include
quick messages, which are pre-written
messages loaded by your company.
1. From the main menu, select
Dispatch >
2. Select an option:
• To send a custom message,
select New Message, and enter
a message.
• To send a quick message,
select Quick Message, and
select a message.
Garmin fleet 590 Quick Start Manual
10/17/2012 1:58:33 PM
3. Select Send.
to “not set.”
Adding a User to the
Time Clock
Setting the Status of a User
Before you can set the status of users,
you must add one or more users to the
device, and your company must send
a list of statuses to the device.
Before you can add a user to the
time clock, the user name must be
provisioned by your company. If your
company has enabled time clock PINs You can set the status of one or more
for the device, you must know the
time clock users.
PIN for the user name you are adding.
1. From the main menu, select Time
You can add multiple time clock users
Clock.
to the same device.
2. If time clock PINs are enabled on
the device, select your user name,
1. From the main menu, select Time
and enter your time clock PIN.
Clock.
3.
Select one or more users.
2. Select Add User.
4. Select Set Status.
3. Enter the user name provided by
your company, select OK.
5. Select the status.
4. If necessary, enter the time clock
PIN for the user name.
The user name appears in the list in
“Validating” status. When the server
validates the user, the status changes
Garmin fleet 590 Quick Start Manual
190-01505-01_0B.indd 5
10/17/2012 1:58:33 PM
About Points of Interest
Your Route on the Map
Finding Points of Interest
1. From the main menu, select
Search > Points of Interest.
2. Select a category.
3. If necessary, select a subcategory.
4. Select a destination.
NOTICE
The speed limit icon feature is for
information only and does not replace
the driver’s responsibility to abide
by all posted speed limit signs and to
use safe driving judgment at all times.
Garmin will not be responsible for
any traffic fines or citations that you
may receive for failing to follow all
applicable traffic laws and signs.
Searching Within a Category
To narrow your search results, you
can search within some categories.
1. Select Search > Points of
Interest.
2. Select a category.
3. If necessary, select a subcategory.
4. Select .
5. Enter all or part of the name.
6. Select Done.
190-01505-01_0B.indd 6
Your route is marked with a magenta
line on the map. If you depart from
the original route, your device
recalculates the route. A speed limit
icon could appear as you travel on
major roadways.
Garmin fleet 590 Quick Start Manual
10/17/2012 1:58:33 PM
About Sleep Mode
Using the Map Functions
➊
•
•
•
•
•
•
•
➋
➌
➍
Sleep mode conserves battery power
when your device is not in use.
Using Sleep Mode
• While the device is on, select
➎➏ ➐
the power key to put the device
into sleep mode.
Select ➊ to view the next turn.
•
While the device is in sleep
If a view of a junction exists,
mode, select the power key,
the junction view appears.
and double-tap to wake the
Select ➋ to view the turn list.
device, if necessary.
Select ➌ to view stops.
Select ➍ to view messages.
Select ➎ to change the data
field.
Select ➏ to view the Where
Am I? page.
Select ➐ to view trip
information.
Garmin fleet 590 Quick Start Manual
190-01505-01_0B.indd 7
10/17/2012 1:58:33 PM
www.garmin.com
913-397-8200
1-800-800-1020
00 358 19 311 001
815 69 555
0808 2380000
+44 (0) 870.8501241
00 33 1 5517 81 89
00800 4412 454
+44 2380 662 915
1-866-429-9296
0180 5 / 42 76 46 - 880
0180 5 / 42 76 46 - 550
00 35 1214 447 460
43 (0) 3133 3181 0
00 39 02 3669 9699
00 902 00 70 97
00 32 2672 5254
0800-0233937
00 46 7744 52020
00 45 4810 5050
www.garmin.com/fleet
Garmin® and the Garmin logo are trademarks of Garmin Ltd.
or its subsidiaries, registered in the USA and other countries.
Garmin fleet™ is a trademark of Garmin Ltd. or its subsidiaries.
These trademarks may not be used without the express
permission of Garmin.
Garmin International, Inc.
1200 East 151st Street,
Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park
Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Zhangshu 2nd Road, Xizhi Dist.
New Taipei City, 221, Taiwan (R.O.C.)
© 2012 Garmin Ltd. or its subsidiaries
190-01505-01_0B.indd 8
10/17/2012 1:58:35 PM

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 8
Creator                         : pdfsam-console (Ver. 2.4.0e)
Producer                        : iText 2.1.7 by 1T3XT
Modify Date                     : 2012:11:30 14:02:31-05:00
Create Date                     : 2012:11:30 14:02:31-05:00

EXIF Metadata provided by EXIF.tools