Garmin Gtr 200 Installation Manual 190 01553 00

2015-05-27

• 1 General Description
  • 1.1 Introduction
  • 1.2 Equipment Description
  • 1.3 Technical Specifications
  • 1.4 Certification
  • 1.5 Reference Documents
• 2 Installation Overview
  • 2.1 Introduction
  • 2.2 Unit Configurations
  • 2.3 Available Accessories
  • 2.4 Installation Considerations
  • 2.5 Antenna Considerations
  • 2.6 Mounting Considerations
  • 2.7 Cabling and Wiring
  • 2.8 Air Circulation and Cooling
  • 2.9 Compass Safe Distance
• 3 Installation Procedures
  • 3.1 Unpacking the unit
  • 3.2 Wiring Harness Installation
  • 3.3 Backshell Assembly
  • 3.4 Mounting Requirements
  • 3.5 Antenna Installation and Connections
  • 3.6 Post Installation Configuration and Checkout Procedures
  • 3.7 Unit Software
  • 3.8 Continued Airworthiness
• 4 Connector Pinout Information
  • 4.1 Pin Function List
  • 4.2 Power
  • 4.3 Lighting Bus
  • 4.4 CAN Bus
  • 4.5 Unit ID
  • 4.6 Serial Data – RS-232
  • 4.7 MIC Audio
  • 4.8 Aux Mono Audio
  • 4.9 Headset Audio
  • 4.10 Music Inputs
  • 4.11 Receiver Audio
  • 4.12 Pilot/Copilot PTT Inputs
  • 4.13 TX Interlock
  • 4.14 Discrete Inputs
• Appendix A Shield Block Connector Installation Instructions
  • A.1 Shield Block Installation Parts
  • A.2 Shield Termination Technique – Method A.1 (Standard)
  • A.3 Shield Termination Technique - Method A.2 (Daisy Chain)
  • A.4 Shield Termination – Method B.1 (Quick Term)
  • A.5 Shield Termination-Method B.2 (Daisy Chain-Quick Term)
  • A.6 Daisy Chain between Methods A and B
  • A.7 Splicing Signal Wires
• Appendix B Serial Interface Specifications
  • B.1 Electrical Interface
  • B.2 Message Formats
• Appendix C Outline and Installation Drawings
• APPENDIX D Interconnect Examples