Ge Appliances Inwall 15071 Smart Digital Timer Owners Manual

Ge-Inwall-15071-Ge-Smart-Digital-Timer-Owners-Manual ge-inwall-15071-ge-smart-digital-timer-owners-manual

2015-03-16

: Ge-Appliances Ge-Inwall-15071-Ge-Smart-Digital-Timer-Owners-Manual ge-inwall-15071-ge-smart-digital-timer-owners-manual ge-appliances pdf

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadGe-Appliances Ge-Inwall-15071-Ge-Smart-Digital-Timer-Owners-Manual
Open PDF In BrowserView PDF
15071

Smart Digital Timer
Typical Wiring Schematic
= Wiring Nut

Black

Red

120 VAC
Power
Source

Black

Timer

Green

Light

Ground

White

White

White
LOAD

NEUTRAL
[WHITE]
GROUND
TIMER-GREEN
WALL-BARE

LINE
[BLACK]

LOAD
TIMER-RED
WALL-BLACK

LINE

If you are unsure or unclear about this instalation, contact a qualified
licensed electrician.

Installation Instruction

1.	 Turn OFF the main power at the circuit breaker.
2.	 Remove the existing switch.
3.	 Connect the wires of Timer and wall box as followed by using the wire
nuts provided.	
a) Connect the Hot/Live wire of main power to the Black wire from Timer.	
b) Connect the Neutral wires to the White wire from Timer. Often, the
neutral wire can be found in the back of the wiring box bound in a 	
wire nut.	
c) Connect the Hot/Live wire of Load to the Red wire from Timer.	
d) Connect the Ground wire to the Green wire from Timer.	
	
Note: Be sure that all wire nuts are secure.
4.	 Tuck the wires into the wall box leaving room for the Timer. Using the
screws provided, mount the timer to the wall box being careful not to
crush any wires.
5.  Place wall-plate over timer and screw in to place using screws provided
6.  Turn Main power ON

DST (Daylight Savings Time)

1.	 To activate DST press both of the “HOUR” and “MIN” keys at the
same time.  The present time will increase by an hour and the
screen will 	
show “DST”  
2.	 To de-activate DST press the “HOUR” and “MIN” keys at the same
time.  The “DST” will no-longer be on the screen.

Random, on/off Setting:

This  feature sets the timer to switch lights ON and OFF at random
intervals while you are out of the house.  This function will only
operate if one or more programmed switching commands are set.
1.	 To activate press the “DAY” and “HOUR” keys at the same time.  
Once activated the “TIMER” symbol will be blinking.
2.	 To de-activate press the “DAY” and “HOUR” keys at the same time
again.  The “TIMER” symbol will no longer be on the display.

Reviewing Programs:

1.	 To review the programs that have been entered, press and release
the “PROG” key. Each time you do this you will be able to scroll
thru the programs.
2.	 Any program can be edited by pressing the “HOUR”, “MIN”, and
“DAY” keys. Then press the “PROG” key in order to accept the
changes.
3.	 When complete press the “CLOCK” key to return to current time
and day.

Deleting Programs:

1.	 To delete a particular program simply press the “PROG” key until
the desired program is displayed.
2.	 Then press the “HOUR” and “MIN” keys until --:-- is displayed.
Then press the “PROG” key in order to delete this particular
program.
3.	 When complete press the “CLOCK” key to return to current time
and day.

Electrical Ratings:
120VAC 60Hz
15A Resistive
15A Tungsten
1HP

*When done programming,           	
  close door.

POWER-UP SEQUENCE:

1.	 Lift up the bottom of the door using a small slotted screwdriver.
2.	 Position the slide switch to TIMER.
3.	 Press the “RESET” button using an insulated tool such as a toothpick.
4.	 The display should flash 12:00AM on Monday.

Setting Current Time:

1.	 Press and HOLD the “CLOCK” key during this entire procedure.
2.	 Press the “HOUR” key to advance the hours.
3.	 Press the “MIN” key to advance the minutes.
4.	 Press the “DAY” key to advance the day.
5.	 If any keys are pressed for a prolonged period, the display will 	
advance rapidly.
6.	 Release the “CLOCK” key once the time and day have been entered. Now
the timer is in operation and ready to be programmed. The colon “:” after
the hours will continuously flash indicating that the clock is running.

Programming ON/OFF Events:

1.	 Press the “PROG” key once. TIMER 1 on - - : - - appears.
2.	 Using the “HOUR” and “MIN” keys enter the desired ON time. See block
programming below for selecting different days of the week.	
When complete press the “PROG” key once.
3.	 Timer OFF --:-- will be displayed. Using the “HOUR” and “MIN” keys
enter the desired OFF time. See block programming below for selecting
different days of the week. When complete press the “PROG” key once.
4.	 If complete press the “CLOCK” key to return to current time 	
and day.
5.	 Note that a total of 7-ON and 7-OFF events can be programmed.

Block Programming:

1.	 When programming ON/OFF events, all days are indicated by default.
To change the day selection simply keep pressing the “DAY” key and the
display will change as follows:
	
a)  Monday - Sunday (Default)
	
b)  Individual Days (Only select 1 day)
	
c)  Monday - Friday
	
d)  Saturday and Sunday
	
e)  Monday - Saturday (Off Sunday)
	
f)   MO, WE, FR
	
g)   TU, TR SA
	
h)  MO, TU, WE
	
i)    TR, FR, SA

Manual Override:

Pressing the door will override the timer setting and will manually
turn the switch ON and OFF.

NOTE:

When you initially program the unit it may be necessary to press the
manual override key as the unit will not look back to determine if it
should be ON. For example if the current time is 2:00PM and you just
programmed the unit to turn ON at 1:00PM, you will need to press
the manual override key to turn it ON. Thereafter, the unit will resume
normal operation (automatic).
Do not use a metallic object to adjust this timer. Always use a
non-metallic object such as a wooden pencil.

MEMORY BACK UP:

This timer is equipped with a rechargeable Ni-Mh battery which will
protect your programs during power failure for up to 30 days.
No need to replace battery.
Note that the screen blanks if the battery is discharged completely.
          is a trademark of the General Electric Company and is used
under license to Jasco Products Company LLC, 10 E. Memorial Road,
Oklahoma City, OK 73114.
This Jasco product comes with a 1 year limited warranty. 	
Visit www.jascoproducts.com for details.
	

15071
Manual Version 2
01-24-2010	
www.jascoproducts.com
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:05:41
Instance ID                     : uuid:c046a79c-d6f5-2d41-82f1-5fe52b80b7bd
Document ID                     : xmp.did:F87F117407206811ACAFE387CF463288
Original Document ID            : adobe:docid:indd:169b6f25-3267-11de-88ff-dd255dfc1ce6
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:F77F117407206811ACAFE387CF463288
Derived From Document ID        : adobe:docid:indd:169b6f25-3267-11de-88ff-dd255dfc1ce6
Derived From Original Document ID: adobe:docid:indd:169b6f25-3267-11de-88ff-dd255dfc1ce6
Derived From Rendition Class    : default
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F77F117407206811ACAFF5B5FD30D8BF, xmp.iid:F87F117407206811ACAFF5B5FD30D8BF, xmp.iid:FB7F117407206811ACAFF5B5FD30D8BF, xmp.iid:F77F117407206811ACAFE387CF463288, xmp.iid:F87F117407206811ACAFE387CF463288, xmp.iid:0180117407206811871FFEB5A996C335, xmp.iid:0280117407206811871FFEB5A996C335, xmp.iid:0380117407206811871FFEB5A996C335, xmp.iid:0480117407206811871FFEB5A996C335, xmp.iid:0580117407206811871FFEB5A996C335, xmp.iid:0680117407206811871FFEB5A996C335, xmp.iid:018011740720681196A68F285FFF1494, xmp.iid:F77F117407206811BEDCD58BE99D2834, xmp.iid:FA7F117407206811BEDCD58BE99D2834
History When                    : 2009:05:26 09:52:22-05:00, 2009:05:26 09:52:22-05:00, 2009:05:26 10:10:31-05:00, 2009:12:30 10:06:42-06:00, 2009:12:30 10:06:42-06:00, 2010:01:12 17:11:50-06:00, 2010:01:12 17:27:41-06:00, 2010:01:12 17:28:26-06:00, 2010:01:12 17:32:20-06:00, 2010:01:14 14:42:29-06:00, 2010:01:14 14:46:25-06:00, 2010:01:19 15:34:29-06:00, 2010:01:25 08:27:44-06:00, 2010:01:25 08:49:34-06:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 72.00, 72.00
Manifest Placed Y Resolution    : 300.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches
Manifest Reference Instance ID  : xmp.iid:0680117407206811871FA3AB51AC6719, uuid:d243c43b-e9c7-104f-8f07-662a474dd296, uuid:384a716f-f8b5-8e48-a0fb-3b5da443b5a3
Manifest Reference Document ID  : uuid:4CD8131D7F3FDE11A5C1C40AB55934E1, xmp.did:0280117407206811BF69D071C56C8175, xmp.did:068011740720681197A58A7769E8721F
Create Date                     : 2010:01:25 08:49:47-06:00
Modify Date                     : 2010:01:25 08:49:48-06:00
Metadata Date                   : 2010:01:25 08:49:48-06:00
Creator Tool                    : Adobe InDesign CS4 (6.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 10611 bytes, use -b option to extract)
Doc Change Count                : 1183
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 1
Creator                         : Adobe InDesign CS4 (6.0.4)
EXIF Metadata provided by EXIF.tools

Navigation menu