Ge Appliances M 400A Data Sheet Roadway Lighting M400A PowrDoor W/Cutoff Optics MDCA & MDCL— Datasheet | OLP2930

Ge-M-400A-Data-Sheet-649461 ge-m-400a-data-sheet-649461

2015-08-07

: Ge-Appliances Ge-M-400A-Data-Sheet-649461 ge-m-400a-data-sheet-649461 ge-appliances pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

DownloadGe-Appliances Ge-M-400A-Data-Sheet- GE Roadway Lighting M400A PowrDoor W/Cutoff Optics MDCA & MDCL— Datasheet | OLP2930  Ge-m-400a-data-sheet
Open PDF In BrowserView PDF
GE
Lighting

Roadway Lighting
M-400A Powr/Door ™ with Cutoff Optics (MDCA & MDCL)

imagination at work

Product Features
From HID to LED, GE continues to push Roadway Lighting to new heights. Recognized for the highest quality and reliability
in street, highway, parkway, and commercial applications, GE offers a wide selection of styles to meet the lighting needs
of municipalities, utilities, DOT customers and more.

Applications

Unique Features

•		 For street, highway or parking lot lighting

•	
•	
•	
•	
•	
•	
•	
	
•	

Housing
•	 Die-cast aluminum housing.
•	 External paddle type stainless steel bail latch

Finish
•	 Polyester powder gray paint finish

Ratings
•		

/

listed unit available

Mounting
•	 Universal two or four-bolt slipfitter
•	 2 in. pipe mounting only with MDRA

Reflectors
•	 Standardized reflector
•	ALGLAS ™ finish on reflector

Plug-in ignitor standard
Minimum start -30°F
Filtered optics
Lamp not included
“Dead back” tunnel type FRP terminal board
No-tool PE receptacle
True 90° cutoff – no light above 90° (meets RP8-2000 	
for full cutoff) with flat glass
Powr/Module ballast assembly

Ordering Number Logic

M-400A Powr/Door ™ with Cutoff Optics (MDCA & MDCL)

____

__

PROD. ID

WATTAGE

MDCA =
M-400A
with Cutoff*
Optics
4-Bolt
Slipfitter

10	=	100
15	 =	 150 (55V)
17	=	175
20	=	200
24	=	250/400
25	=	250
31	=	310
32	=	 320
35	=	 350
40	=	400

MDCL =
M-400A
with Cutoff*
Optics
2-Bolt
Slipfitter

NOTE: Dual
wattage
connected for
* = Previously lower wattage
IESNA Full
Cutoff Optics

_
LIGHT
SOURCE
E	 = 	Energy Act
Compliant Pulse
MH 	(EPMH)
S	 = 	HPS
P	 = 	PMH
Standard: Lamp
not included.

_

	

_ 		
BALLAST
TYPE
SELECTION

VOLTAGE
60Hz
0 	= 120/208/240/
277 Multivolt
1	 =	120
2	 =	208
3	 =	240
4	 =	277
5	 =	480
7	 =	120X240
8	 =		 240V
Ballast 120V PE
Receptacle not
reconnectable
D	=	347
F	 =	120X347
T	 =	220
W	=	 230

See Ballast
Selection Table
A 	=	 Autoreg
H	=	 HPF
Reactor
or Lag
M	=	 Mag-Reg
N	=	 NPF
Reactor
or Lag
P	 =	 CWI with
Grounded
Socket
		 Shell

_

2
_

_

PE
FUNCTION

IGNITOR
MOUNTING

LENS
TYPE

_

_

_

IES
DISTRIBUTION
FILTER
TYPE
See Photometric 1	=	 Fiber
Selection Table 			 gasket
2	=	 Charcoal
S	 =	Short
		 with
M	=	Medium
		 elastomer 	
		 gasket
C	=	Cutoff*

1 = None
2 =		Plug-in base A	 =	 Acrylic Clear
2 = PE Receptacle
and Ignitor
Globe (250 watt
Maximum)
NOTE: Receptacle
F	 =	 Flat Glass*
connected same
G	 =	 Shallow Glass
voltage as unit
Globe
except as noted.
L	=	Polycarbonate
Order PE Control
Clear Globe (250
1	 =	 Type I
separately.
watt)
2	 =	 Type II
HPS only
3	 =	 Type III
* = Previously
* = Previously
IESNA Full Cutoff
IESNA Full Cutoff
Optics
Optics

50Hz
6	 =	220
R	 =	230
Y	 =	240
NOTE: Dual voltage
connected for lower
voltage

OPTIONS
F	 =	 Fusing (Not 	
		 available with 	
		 multivolt or 	
		 dual voltage)
J	 =	 Line Surge 	
		Protector,
		 Expulsion Type
		 (UL not
		available)
N	=	Meets
proposed
ANSI C136.31
requirements
for Bridge and
Underpass
Vibration
U	 =	 UL listed 		
		 glass lens 	
		 (60Hz only)

Ballast Selection Table
Ballast Type/Voltage	
Ballast Type/Voltage
60Hz	50Hz

	

	
Light						
		
347**	
240/120				
Wattage	 Source	 Multivolt	 120	
208	
240	 277	
480	
120X240	 120X347	
PE R	
220	
230	 220	
230	

240

150 (55V)	 HPS	
H,N,A	 G,H,M,N	
G,M	
G,M	
G,M	
G,M	 G,H,M,N	G*,H,M*,N	 G,M	
N/A	 N/A	N/A	 N/A	 N/A
200	HPS	
A,M,P	 A,G,H,M,N,P	A,G,H,M,N,P	A,G,H,M,N,P	A,G,M,P	A,G,M	A,G,M,P	N/A	A,G,H,M,N	
N/A	
H	N/A	 N/A	N/A
250	HPS	
A,M,P	
A,G,H,M,N,P 	 A,G,H,M,N,P	 A,G,H,M,N,P	 A,G,M,P	 A,G,M,P	 A,G,M,P	 A,M,P	
A,G,H,M,N	 A,H	
H	
A,H,M,N	H	
M
250/400	HPS	 A	
A	A	A	A	
A	
N/A	
N/A	
N/A	
N/A	 N/A	N/A	 N/A	 N/A
310	HPS	
A,M	
A,G,M	
A,G,H,M,N	 A,G,H,M,N	 A,G,M	 A,G,M	A,G,M	 N/A	
A,G,H,M,N	 N/A	
H	N/A	 N/A	N/A
400	HPS	
A,M	 A,G,M	
A,G,H,M,N	 A,G,H,M,N	A,G,M	 A,G,M	A,G,M	 A,G,M	
A,G,H,M,N	H,A,N	H	 A,H,M,N	N/A	 A,H,M
175	EPMH	
A	
A	A	A	A	
A	
A	
N/A	A	 N/A	
N/A	
250	EPMH	
A	A	
A	
A	
A	
A	
A	
A	
N/A	
N/A	
N/A	
320	EPMH	
A	A	
A	
A	
A	
A	
A	
N/A	
N/A	
N/A	
350	EPMH	
A	A	
A	
A	
A	
A	
A	
N/A	
N/A	
400	EPMH	A	
A	
A	
A	
A	
A	
A	
A	
N/A	
NOTE: N/A = Not available.  *Not available in 120 X 347.

N/A	N/A	
N/A	N/A	
N/A	N/A	
N/A	N/A	
N/A	N/A	

C/F = Contact Manufacturer

Photometric Selection Table
PHOTOMETRIC SELECTION TABLE

CLEAR REFRACTORS.
All light sources are clear.

IES Distribution Type
Photometric Curve Number 35Flat Glass “F” 	
Sag Glass “G”	
	Light	
Wattage	 Source	
MC2	 MC3		
MC1	SC2	 SC3	MC2	 MC3	

Polycarbonate

150 (55V)	
200-400 	
175, 250, 320,	
350, 400	

C/F	
451045** MC3	
C/F	
N/A	

HPS	
HPS	
EPMH	
EPMH	

450386	450387	N/A	 N/A	
451001	 451002	 N/A	
450101	
450343	 450342	 N/A	
N/A	
452880*	 452882*	450281	N/A	

N/A	 450547	450546	
450102	 451003	 451004	
N/A	
450544	 450545	
N/A	 450280	 N/A	

NOTE: N/A = Not Available C/F = Contact Manufacturer PMH—Contact Manufacturer *Requires the use of ED-28 Lamp **250 watts maximum

N/A	
N/A	
N/A	
N/A	
N/A	

N/A
N/A
N/A
N/A
N/A

MDCA – Suggested Catalog Ordering Numbers
			
Catalog Number	
Wattage	 Light Source	

Voltage	 Ballast	
(60 Hz)	
Type	

Refractor	Photometric
Type	
Distribution

MDCA25S0A22FMC21	250	
MDCA40S0A22FMC31	400	

Multivolt	
Multivolt	

Glass	
Glass	

HPS	
HPS	

Auto-Regulator	
Auto-Regulator	

MC2
MC3

All GE suggested catalog ordering numbers come with PE receptacle. PE control must be ordered separately.
Order and install SCCL-PECTL if no PE is desired.
Multivolt ballasts can be for either 120, 208, 240, or 277 volt incoming power supply.

Product Dimensions
TOP VIEW
31.81 in.
(808 mm)

9.04 in.
(230 mm)

15.12 in.
(384 mm)

10.75 in.
(273 mm)

SHALLOW GLASS
GLOBE

Adjustable For 1-1/4 in. (MDCL only)
(38 mm) to 2 in. (51 mm) Pipe

8.32 in.
(211 mm)

8.32 in.
(211 mm)

8.32 in.
(211 mm)
12.25 in. R
(311 mm R)
15.12 in.
(384 mm)

15.12 in.
(384 mm)
18.75 in. R
(476 mm R)

31.81 in.
(808 mm)

D ATA

SIDE VIEWS

• Approximate Net Weight: 33-39 lbs (15-19 kgs)
• Effective Projected Area: 1.1 sq. ft. max. (0.1 sq. M max.)
• Suggested Mounting Height: 30-50 ft. (9-15 M)

www.gelighting.com
GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property
of their respective owners. Information provided is subject to change without notice. All values are design or typical
values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of
the General Electric Company. © 2014 GE.
OLP2930 (Rev 11/04/14)



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : GE Outdoor Lighting Fixtures
Create Date                     : 2014:11:04 16:53:54-05:00
Keywords                        : Roadway, Lighting;, Die-Cast, Aluminum, housing;, Cutoff, optics;, M-400A;, For, street;, highway, or, parking, lot, lighting;, OLP2930;, Datasheet
Modify Date                     : 2014:11:06 15:05:47-05:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Instance ID                     : uuid:0f9e0f77-1018-48d5-8002-96eb00951fc2
Original Document ID            : adobe:docid:indd:1bacd13a-579f-11dc-a078-a0c8dc376177
Document ID                     : xmp.id:da6c3031-c06d-438e-954d-d9ff115d3970
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:59e6081c-6937-44f0-9fe8-a5c3d2aa6307
Derived From Document ID        : xmp.did:45e8e45d-5bcd-4836-af28-1c80b0984f08
Derived From Original Document ID: adobe:docid:indd:1bacd13a-579f-11dc-a078-a0c8dc376177
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Macintosh)
History Changed                 : /
History When                    : 2014:11:04 16:53:54-05:00
Metadata Date                   : 2014:11:06 15:05:47-05:00
Creator Tool                    : Adobe InDesign CC (Macintosh)
Format                          : application/pdf
Title                           : GE Roadway Lighting M400A PowrDoor w/Cutoff Optics MDCA & MDCL— Datasheet | OLP2930
Creator                         : GE Outdoor Lighting Fixtures
Description                     : From HID to LED, GE continues to push Roadway Lighting to new heights. Recognized for the highest quality and reliability in street, highway, parkway, and commercial applications, GE offers a wide selection of styles to meet the lighting needs of municipalities, utilities, DOT customers and more.
Subject                         : Roadway Lighting, Die-Cast Aluminum housing, Cutoff optics, M-400A, For street, highway or parking lot lighting, OLP2930, Datasheet
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 4
EXIF Metadata provided by EXIF.tools

Navigation menu