Ge Appliances M 400A Data Sheet Roadway Lighting M400A PowrDoor W/Cutoff Optics MDCA & MDCL— Datasheet | OLP2930

Ge-M-400A-Data-Sheet-649461 ge-m-400a-data-sheet-649461

: Ge-Appliances Ge-M-400A-Data-Sheet-649461 ge-m-400a-data-sheet-649461 ge-appliances pdf

Open the PDF directly: View PDF .
Page Count: 4

GE

Lighting

imagination at work

M-400A Powr/Door™ with Cutoff Optics (MDCA & MDCL)

Roadway Lighting

Applications

• For street, highway or parking lot lighting

Housing

• Die-cast aluminum housing.

• External paddle type stainless steel bail latch

Finish

• Polyester powder gray paint finish

Ratings

• listed unit available

Mounting

• Universal two or four-bolt slipfitter

• 2 in. pipe mounting only with MDRA

Reflectors

• Standardized reflector

• ALGLAS™ finish on reflector

Unique Features

• Plug-in ignitor standard

• Minimum start -30°F

• Filtered optics

• Lamp not included

• “Dead back” tunnel type FRP terminal board

• No-tool PE receptacle

• True 90° cutoff – no light above 90° (meets RP8-2000

for full cutoff) with flat glass

• Powr/Module ballast assembly

From HID to LED, GE continues to push Roadway Lighting to new heights. Recognized for the highest quality and reliability

in street, highway, parkway, and commercial applications, GE offers a wide selection of styles to meet the lighting needs

of municipalities, utilities, DOT customers and more.

Product Features

/

Light

Wattage Source MC2 MC3 MC1 SC2 SC3 MC2 MC3

150 (55V) HPS 450386 450387 N/A N/A N/A 450547 450546 C/F

200-400 HPS 451001 451002 N/A 450101 450102 451003 451004 451045** MC3

175, 250, 320, EPMH 450343 450342 N/A N/A N/A 450544 450545 C/F

350, 400 EPMH

452880*

452882*

450281 N/A N/A 450280 N/A N/A

PHOTOMETRIC SELECTION TABLE

CLEAR REFRACTORS.

All light sources are clear.

IES Distribution Type

Photometric Curve Number 35-

Flat Glass “F” Sag Glass “G” Polycarbonate

NOTE: N/A = Not Available C/F = Contact Manufacturer

PMH—Contact

Manufacturer *Requires the use of ED-28 Lamp **250 watts maximum

Photometric Selection Table

Light 347** 240/120

Wattage Source Multivolt 120 208 240 277 480 120X240 120X347 PE R 220 230 220 230 240

150 (55V) HPS H,N,A G,H,M,N G,M G,M G,M G,M G,H,M,N G*,H,M*,N G,M N/A N/A N/A N/A N/A

200 HPS A,M,P A,G,H,M,N,P A,G,H,M,N,P A,G,H,M,N,P A,G,M,P A,G,M A,G,M,P N/A A,G,H,M,N N/A H N/A N/A N/A

250 HPS A,M,P A,G,H,M,N,P A,G,H,M,N,P A,G,H,M,N,P A,G,M,P A,G,M,P A,G,M,P A,M,P A,G,H,M,N A,H H A,H,M,N H M

250/400 HPS A A A A A A N/A N/A N/A N/A N/A N/A N/A N/A

310 HPS A,M A,G,M A,G,H,M,N A,G,H,M,N A,G,M A,G,M A,G,M N/A A,G,H,M,N N/A H N/A N/A N/A

400 HPS A,M A,G,M A,G,H,M,N A,G,H,M,N A,G,M A,G,M A,G,M A,G,M A,G,H,M,N H,A,N H A,H,M,N N/A A,H,M

175 EPMH A A A A A A A N/A A N/A N/A N/A N/A N/A

250 EPMH A A A A A A A N/A A N/A N/A N/A N/A N/A

320 EPMH A A A A A N/A A N/A A N/A N/A N/A N/A N/A

350 EPMH A A A A A N/A A N/A A N/A N/A N/A N/A N/A

400 EPMH A A A A A A A N/A A N/A N/A N/A N/A N/A

2

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _

PROD. ID

VOLTAGE FILTER

OPTIONS

IGNITOR

MOUNTING

PE

FUNCTION

LENS

TYPE

IES

DISTRIBUTION

TYPE

WAT TAGE LIGHT

SOURCE

Ordering Number Logic

M-400A Powr/Door™ with Cutoff Optics (MDCA & MDCL)

BALLAST

TYPE

SELECTION

1 = None

2 = PE Receptacle

NOTE: Receptacle

connected same

voltage as unit

except as noted.

Order PE Control

separately.

MDCA =

M-400A

with Cutoff*

Optics

4-Bolt

Slipfitter

MDCL =

M-400A

with Cutoff*

Optics

2-Bolt

Slipfitter

* = Previously

IESNA Full

Cutoff Optics

10 = 100

15 = 150 (55V)

17 = 175

20 = 200

24 = 250/400

25 = 250

31 = 310

32 = 320

35 = 350

40 = 400

NOTE: Dual

wattage

connected for

lower wattage

E = Energy Act

Compliant Pulse

MH (EPMH)

S = HPS

P = PMH

Standard: Lamp

not included.

60Hz

0 = 120/208/240/

277 Multivolt

1 = 120

2 = 208

3 = 240

4 = 277

5 = 480

7 = 120X240

8 = 240V

Ballast 120V PE

Receptacle not

reconnectable

D = 347

F = 120X347

T = 220

W = 230

50Hz

6 = 220

R = 230

Y = 240

NOTE: Dual voltage

connected for lower

voltage

2 = Plug-in base

and Ignitor 1 = Fiber

gasket

2 = Charcoal

with

elastomer

gasket

A = Acrylic Clear

Globe (250 watt

Maximum)

F = Flat Glass*

G = Shallow Glass

Globe

L = Polycarbonate

Clear Globe (250

watt)

HPS only

* = Previously

IESNA Full Cutoff

Optics

See Photometric

Selection Table

S = Short

M = Medium

C = Cutoff*

1 = Type I

2 = Type II

3 = Type III

* = Previously

IESNA Full Cutoff

Optics

See Ballast

Selection Table

A = Autoreg

H = HPF

Reactor

or Lag

M = Mag-Reg

N = NPF

Reactor

or Lag

P = CWI with

Grounded

Socket

Shell

F = Fusing (Not

available with

multivolt or

dual voltage)

J = Line Surge

Protector,

Expulsion Type

(UL not

available)

N = Meets

proposed

ANSI C136.31

requirements

for Bridge and

Underpass

Vibration

U = UL listed

glass lens

(60Hz only)

NOTE: N/A = Not available. *Not available in 120 X 347. C/F = Contact Manufacturer

Ballast Selection Table

Ballast Type/Voltage Ballast Type/Voltage

60Hz 50Hz

Product Dimensions

• Approximate Net Weight: 33-39 lbs (15-19 kgs)

• Effective Projected Area: 1.1 sq. ft. max. (0.1 sq. M max.)

• Suggested Mounting Height: 30-50 ft. (9-15 M)

DATA

SIDE VIEWS

TOP VIEW

31.81 in.

(808 mm)

15.12 in.

(384 mm)

9.04 in.

(230 mm)

15.12 in.

(384 mm)

31.81 in.

(808 mm)

15.12 in.

(384 mm)

8.32 in.

(211 mm)

10.75 in.

(273 mm)

8.32 in.

(211 mm)

Adjustable For 1-1/4 in. (MDCL only)

(38 mm) to 2 in. (51 mm) Pipe

All GE suggested catalog ordering numbers come with PE receptacle. PE control must be ordered separately.

Order and install SCCL-PECTL if no PE is desired.

Multivolt ballasts can be for either 120, 208, 240, or 277 volt incoming power supply.

Voltage Ballast Refractor Photometric

Catalog Number Wattage Light Source (60 Hz) Type Type Distribution

MDCA25S0A22FMC21 250 HPS Multivolt Auto-Regulator Glass MC2

MDCA40S0A22FMC31 400 HPS Multivolt Auto-Regulator Glass MC3

MDCA – Suggested Catalog Ordering Numbers

12.25 in. R

(311 mm R)

18.75 in. R

(476 mm R)

8.32 in.

(211 mm)

SHALLOW GLASS

GLOBE

www.gelighting.com

GE and the GE Monogram are trademarks of the General Electric Company. All other trademarks are the property

of their respective owners. Information provided is subject to change without notice. All values are design or typical

values when measured under laboratory conditions. GE Lighting and GE Lighting Solutions, LLC are businesses of

the General Electric Company. © 2014 GE.

OLP2930 (Rev 11/04/14)